Professional Documents
Culture Documents
Umb 71406578
Umb 71406578
714 06 578
type: UMB 169-6-2020-K258-50-3/4 -HC
equivalent to: UMB 6.7-6-80-K10.16-1.97-3/4 -HC
page # 1 / 2 tipping weight: 30-56 x 1000 lbs
Stage front view cylinder
diameters (inch) A 9.1"
6.7 ØC 7.6"
5.9 G1 22.2"
5.1 I 12.1"
4.3 K1 10.2"
3.6 M1 3.9"
2.8 ØP 3.9"
ØQ 2.6"
S 12.7"
ØW 2"
X 1.8"
1
including 0.79" pull-out [tol. -0.20"; +1.18"]
2
cylinder is delivered including oil inlet swivel adapter and cup
specifications tipping view
total stroke1 80 "
dry weight cylinder only 203 lbs
total volume 7.1 gallon
working volume 6.5 gallon
maximum pressure 3191 psi
maximum pump flow 16.1 gallon/min
maximum allowable thrust first stage3 44.1 klbf
oil inlet 3/4 BSP
technical notes
This cylinder is a lifting device only and may not be used as
a structural member or be subjected to side load. Sideload
and/or poor alignment might result in cylinder leakage.
Hyva therefore strongly recommends the use of a cradle,
even in instances where the cylinder only tips to the rear
or to the side. The cylinder is painted black RAL9005.
For suitable hydraulic oils, please refer to data sheet
OIL-0011. For details of available brackets and
cradles, please refer data sheet 015BRA06.
Detailed calculations can be made using the HYVA Tipper
Program, freely available from tipper.hyva.com.
3
The cylinder thrust on the first stage (from the HYVA
Tipper Program) must not exceed the maximum allowable
(see specifications above).
tipping weight
PL 104 " 92
YCOG 28 " 28
ROH 28 " 28
BL 262 238 219 " 239 217 199
CYL w.r.t. COG (W) 0 12 22 " 0 11 20
Tipping weight for full stroke of 46° Tipping weight for full stroke of 52°
Tipping weight 30 36 42 x1000 lbs 34 41 49
Tipping weight for second last stage, up to 38° Tipping weight for 2nd last stage, up to 43°
Tipping weight 43 50 56 x1000 lbs 44 50 56
Subject to change without notice, no rights reserved. DO-U 71406578 / 17-12-06 / RV AA
HYVA CYLINDER
714 06 578
type: UMB 169-6-2020-K258-50-3/4 -HC
equivalent to: UMB 6.7-6-80-K10.16-1.97-3/4 -HC
page # 2 / 2