Professional Documents
Culture Documents
Catalogo Oerlikon 2019 - Ing PDF
Catalogo Oerlikon 2019 - Ing PDF
PICTOGRAMS MEANING
WARRANTY
PFC
2
Power factor control and Warranty period for TIG LIFT : arc striking
limitation of harmonic current professional equipment when lifting the torch
POWER FACTOR
CONTROL in the public network YEARS TIG LIFT
WARRANTY
TIG LIFT + : arc striking
Cellulosic
Welding of cellulosic coated
electrodes 3
YEARS
Warranty period for
industrial equipment TIG LIFT
when lifting the torch
with 4 time simulation
Plasma cutting
Motor generator compatible Power source can be installation with central
MOTOR GENERATOR used with important CENTRAL connector
LONG : 70 m CONNECTOR
COMPATIBLE SECTION : length of primary cable
3 x 2.5 mm2
SYNERGIC
SETTINGS WATER COOLING NEW New product
SINGLE PHASE PORTABLE INVERTERS FOR STICK WELDING
MINIARC 3.2 METALWORK CITOARC HEATING
Ø ELECTRODES 1.6 to 3.2 mm
1600 / 1750
The MINIARC 3.2, known for its exceptional “weight/power” Ø ELECTRODES 1.6 to 3.2 mm
ratio, is suitable for any maintenance activities
Power sources for manual metal arc welding
and everyday intervention operations.
for industrial and professional use.
WARRANTY
FEATURES & BENEFITS Compact and reliable system.
2
WARRANTY
QEasy-to-use : excellent arc striking and stability.
QPower supply : 230 V single-phase.
QUltra light : less than 3.8 kg.
2
YEARS
FEATURES & BENEFITS
QEasy-to-use : excellent arc striking and stability. YEARS
QExceptional performance : high duty cycle at 40°C.
QReady for use : delivered with case and accessories.
QExceptional arc control.
QLow energy consumption.
2015-821
2015-765
MOTOR GENERATOR
COMPATIBLE
MOTOR GENERATOR
COMPATIBLE
Item number:
Power source W000385238
1
SINGLE PHASE PORTABLE INVERTERS FOR STICK WELDING
CITOARC FORCE 1450 / 1650 / 1850 METALWORK
Electrodes diameter from 1.6 to 4.0 mm
Item number:
Power source W000385251 W000385252 W000385253
25C25+ arc kit W000260683
WTT2 9V 4m TIG torch W000278876
WARRANTY
2
2016-059
YEARS
LONG : 70 m
SECTION :
3 x 2.5 mm2
PFC
POWER FACTOR
CONTROL
2016-103
2016-100
2
SINGLE PHASE PORTABLE INVERTER FOR STICK WELDING
For demanding activities such as on site welding. Sturdy equipment with high liability and high duty cycle works.
PFC
2
Anti Sticking devices.
QArc dynamism control. LONG : 70 m
MOTOR GENERATOR POWER FACTOR
QLow primary consumption. CONTROL SECTION :
COMPATIBLE
3 x 2.5 mm2 YEARS
3
applications. Smart operation allows it to handle any stick, TIG and
MIG applications
YEARS FEATURES & BENEFITS
QSturdy and liable. QGouging with electrodes up
QRefined network balance (+/-10%). to 6.3 mm diameter.
QHot Start adjustable for instantaneous starting. QDigital meter display as standard.
QIntegrated Anti-sticking device. QRemote control plug.
QArc dynamism (Arc Force) can be changed QReduced open circuit voltage
for improved weld pool fluidity. possible.
QEasy to use.
CITOARC
CITOARC 3500i
1900C FORCE
Primary Voltage (50-60Hz) 230 V (+/- 20%) - 1 ph 400 V (+/- 20%) - 3 ph
Primary effective consumption 16 A 28.5 A
TIG LIFT
Motor generator power 7.3 kVA -
No-load voltage 67 V (14 V VRD) -
Cellulosic Welding intensity 5 - 160 A 5 - 350 A
- 160 A (50%) 350 A (35%)
Duty cycle
GOUGING 60% 150 A 300 A
(10 min. cycle @ 40 °C)
MOTOR GENERATOR 100% 130 A 250 A
COMPATIBLE Electrode diameter 1.6 - 4.0 mm 1.6 to 6.3 mm
Connector size 13 mm -
Dimensions 200 x 365 x 475 mm 390 x 300 x 525 mm
Weight 9 kg 29 kg
Protection / Insulation class IP 23 / H
Standards EN 60974-1 / EN 60974-10
Item number:
Power source W000385258 W000263469
Add ons:
Arc kit (1) W000260684 W000011139
Remote control W000242069
Valve TIG torch WTT2 - 26 V - 4 m W000278885
Wear part box for WTT2 26 W000371536
(1) Electrode holder and earth clamp with welding cables
3
THREE PHASE INVERTER FOR STICK WELDING
CITOARC 270 BOILERMAKING
Ø ELECTRODES 1.6 to 5.0 mm
WARRANTY
CITOARC 270 welder has been designed and manufactured to combine both a rugged
industrial construction with excellent arc characteristics. The machine is built to handle
harsh environmental conditions using tunnel
3
YEARS MOTOR GENERATOR TIG LIFT
COMPATIBLE
technology to separate the PCBs and sensitive
parts from contaminating cooling airflow. FEATURES & BENEFITS
QRobust case and components.
QFully featured and user friendly control panel.
CITOARC 270
QSoft and Crisp mode.
Primary Voltage (50-60Hz) 400 V (+/- 10%) - 3 ph
Current range 5 - 270 A QAdjustable Hot Start and Arc Force.
Duty cycle 35% 270 A / 30.8 V Item number:
(10 min. cycle @ 40 °C) 100% 200 A / 28 V Power source W000403606
Fuse size 20 A
Add ons:
Dimensions 404 x 240 x 530 mm
Weight 22 kg Kit 25C50 - 3 m W000260684
Protection / Insulation class IP 23 / H Kit 35C50 - 4 m W000011139
EN 60974-1 TIG torch WTT 26V 4 m W000278885
Standards EN 60974-10 Remote control - 15 m K10095-1-15M
3
QHot Start. (F.A.N.™). Open Circuit Voltage 78
QArc Force. QEquipped with wheels, Duty cycle 35% 400 A / 36 V 670 A / 44 V
QDigital meters. pull bar and two lifting (10 min. cycle @ 40 °C) 100% 240 A / 29 V 400 A / 36 V
hooks. YEARS Fuse size (slow) 63 / 40 A 100 / 63 A
QEasy to understand graphic
Electrode diameter 1.6 - 6.3 mm
control panels.
Dimensions 640 x 580 x 700 mm 670 x 580 x 700 mm
Weight 125 kg 150 kg
Protection / Insulation class IP 23 / H
Standards EN 60974-1 / EN 60974-10
Item number:
GOUGING Power source W000403564 W000403565
Add ons:
MMA kit ARC 50C50+ W000260682
TIG LIFT TIG torch with valve WTT2 26V 4 m W000278885
FLAIR 600 gouging torch W00010136
MOTOR GENERATOR
COMPATIBLE
Cellulosic
4
STICK ELECTRODES
Classification
All positions rutile electrode
EN ISO 2560 A
E 35 RC 11
OVERCORD R12 ble
Classification OVERCORD R92
Also availa s EN ISO 2560 A
AWS SFA-5.1
Features: sm all pack Features: E 6013
in E 380 RC 11
Rutile coated MMA electrode for all Universal rutile electrode, all positions including vertical
AWS SFA-5.1
positional welding. Easy to use and tolerant of dirty E 6013 descending welding. Smooth fusion, good looking weld bead.
or poorly prepared base plates. Efficiency 100%. Can be used on all types of power sources even with a low
no-load voltage. Light or
Current condition:
medium frameworks, seamless
QDirect current with - Ø Length Quant. / Quant. Item number
constructions, maintenance. (mm) (mm) Box / Carton
polarity to electrode.
1.6 300 240 1440 W000384785
QAlternating current: Current condition:
Ø Length Quant. / Quant. 2.0 350 160 960 W000380245
Uo > 50 V. Item number QDirect current with -
(mm) (mm) Box / Carton 2.5 350 230 690 W000258232
2.0 350 160 960 W000384854 polarity to electrode 3.2 350 165 495 W000258233
2.5 350 260 780 W000258223 QAlternating current : 3.2 L 450 165 495 W000258234
3.2 350 160 480 W000258224 4.0 350 110 330 W000258235
Uo > 45 V
3.2 L 450 160 480 W000258225 4.0 L 450 110 330 W000258236
4.0 350 105 315 W000258226
Classification
Basic electrode
EN ISO 2560 A
E 425 B 32 H5
SUPERCITO 7018 S AWS SFA-5.1
Features: E 7018-1 H4
Basic coated MMA electrode for producing crack-free and tough welding joints. Good welding
characteristics, suitable for root passes and positional welding, welds are X-ray quality. The weld Box packaging (CBOX) Vacuum packaging (VPMD)
metal has good ISO-V toughness to -50 °C. Suitable forunalloyed steels with low purity or higher Ø Length Quant./ Quant. Quant./ Quant.
carbon content <0.4% C, and for buffer layers. Very low hydrogen content after re-drying. (mm) (mm) bag / Carton Item number bag / Carton Item number
2.5 350 185 555 W000258277 90 540 W000258282
Also available in MICRODRY packaging, a multilayer film (mix of plastic and aluminium) which
3.2 350 115 345 W000258278 55 330 W000258283
provides a perfect barrier against humidity. Therefore no rebacking, no holding oven and no 3.2 L 450 115 345 W000258279 55 330 W000258284
quiver are necessary. The electrodes can be used right after opening and during 8h. 4.0 450 80 240 W000258280 40 240 W000258285
5.0 450 55 165 W000258281 - - -
Current condition:
QDirect current with + polarity to electrode.
QAlternating current: Uo > 70 V.
Classification
Rutile coated electrodes for stainless steels
EN ISO 3581-A
E19 9 L R 12
SUPRANOX 308L AWS A-5.4
Features: E308L-17
SUPRANOX 308L is a rutile coated MMA electrode for welding similar austenitic stainless
Cr-Ni steels, also suitable for ferritic stainless Cr-steels. Metal transfer in fine droplets and Box packaging (CBOX) Vacuum packaging (VPMD)
nearly spatter free, the slag is generally self releasing from finely-rippled concave fillet Ø Length Quant./ Quant. Quant./ Quant.
(mm) (mm) bag / Carton Item number bag / Carton Item number
welds with an excellent bead surface appearance. Good striking and restriking. Under wet
2.0 300 340 1020 W000375882 150 900 W000375874
corrosive conditions, suitable for operating temperatures <350°C, non-scaling <800°C.
2.5 300 190 570 W000375886 90 540 W000375875
Current condition: 3.2 350 120 360 W000375888 55 330 W000375877
4.0 350 80 240 W000375891 40 240 W000375879
QDirect current with + polarity to electrode.
QAlternating current: Uo > 50 V.
5.0 350 50 150 W000375893 - - - 5
STICK ELECTRODES
Classification
Rutile coated electrodes for stainless steels EN ISO 3581-A
E19 12 3 LR 12
SUPRANOX 316L Also available
in small pack
s
AWS A-5.4
Features: E316L-17
SUPRANOX 316L is a rutile coated MMA electrode for welding similar austenitic
Box packaging (CBOX) Vacuum packaging (VPMD)
Cr-Ni-Mo steels. The weld metal transfer is in fine droplets and nearly spatter free,
Ø Length Quant. / Quant. Quant. / Quant.
depositing finely rippled concave fillet welds with an outstanding weld bead aspect (mm) (mm) Box / Carton Item number Box / Carton Item number
and generally self-releasing slag. Good striking and restriking. Under wet corrosive 1.6 300 - - - 250 1500 W000375922
conditions suitable for operating temperatures <400°C. 2.0 300 340 1020 W000375872 150 900 W000375923
2.5 300 190 570 W000375873 90 540 W000375924
Current condition: 3.2 350 120 360 W000375876 55 330 W000375925
QDirect current with + polarity to electrode. QAlternating current: Uo > 60 V. 4.0 350 80 240 W000375878 40 240 W000375865
Rutile coated electrode for stainless steels with low Chrome VI emission
NEW
CLEARINOX E 308L Classification CLEARINOX E 316L Classification
EN ISO 3581-A EN ISO 3581-A
Features: Features:
E 19 9 L R 22 E 19 12 3 L R 22
Electrode for welding type 18.8 and 20.10 steels, Electrode for welding type 18.8 and 20.10 steels,
AWS A 5.4 AWS A 5.4
with a reduced CrVI concentration in the welding fume. E 308L 17 with a reduced CrVI concentration in the welding fume. E 316L 17
Use of CLEARINOX electrode in conjunction with a fume Use of CLEARINOX electrode in conjunction with a fume
control strategy may significantly reduce the exposure of CrVI to control strategy may significantly reduce the exposure
welders. Very nice bead aspect. All positions welding except of CrVI to welders. Very nice bead aspect. Low carbon type
vertical descending. Available in vacuum packaging (VPMD). Z2 CND 17 12 steels welding. All positions welding except
Current condition: vertical descending. Available
Ø Length Quant. / Quant. in vacuum packaging (VPMD). Ø Length Quant. / Quant.
QDirect current with (mm) (mm) Box / Carton Item number (mm) (mm) Box / Carton Item number
+ polarity to electrode Current condition:
2.5 300 90 540 W000387142 2.5 300 90 540 W000387159
3.2 350 55 330 W000387152 QDirect current with 3.2 350 55 330 W000387160
4.0 350 40 240 W000387153 + polarity to electrode 4.0 350 40 240 W000387161
5.0 350 20 120 W000387154 5.0 350 20 120 W000387162
Classification
Electrode for repair and assembly
EN ISO 3581-A
EZ (29 9) R 12
SUPRANOX RS 312 Also available
in small pack
s
AWS A-5.4
Features: E312L-16
DW 312 is a rutile coated MMA electrode for joining difficult-to-weld steels, dissimilar steels and for wear-resistant surfacing
and buffer layers, the deposit hardness is ~220 HB. Applications include repair and maintenance welding on machines, power Vacuum packaging (VPMD)
transmission equipment and tools. The microstructure of the higher strength weld metal consists of ferritic-austenitic Cr-Ni steel, Ø Length Quant. / Quant.
(mm) (mm) Box / Carton Item number
with ~50% delta-ferrite, and is highly crack resistant, rust-proof and non-scaling <1100 °C. Very good weldability, weld metal
2.5 300 95 570 W000258455
transfer is in fine droplets with easy slag removal, producing a good weld bead shape.
3.2 350 55 330 W000258456
Current condition: 4.0 350 35 210 W000258457
QDirect current with + polarity to electrode. QAlternating current: Uo > 55 V.
Classification
Electrode for joining and surfacing cast iron
EN ISO 1071
E Ni Fe Ci 1
SUPERFONTE NiFe Also available
in small pack
s
AWS SFA-5.15
Features: E Ni Fe Ci
SUPERFONTE NiFe is a basic-graphite coated MMA electrodes with nickel-iron core wire, for joining and surfacing of cast iron
without preheating or with a minimum of < 300°C, «cast iron cold welding». Higher weld metal strength than SUPERFONTE Ni. Vacuum packaging (VPMD)
Used for welding applications on new cast-iron components made of globular gray-cast iron (GJS/GGG) and dissimilar joining Ø Length Quant. / Quant.
(mm) (mm) Box / Carton Item number
of GJS to steel. Suitable for cast irons with globular graphite (GJS), black-heart cast iron (GJMB), white-heart cast iron (GJMW),
2.5 350 115 690 W000258513
austenitic cast iron and dissimilar joints to steel. Easy striking, stable arc, finely-rippled bead surface. Weld at low heat input
3.2 350 70 420 W000258514
with short beads, ~10 to 30 mm, and hammer peen. Weld metal can be machined.
Current condition:
6 QDirect current with + polarity to electrode. QAlternating current: Uo > 50 V.
ldline.eu
www.we
PORTABLE QUIVERS
WELDRY 372 INOX
Portable quivers forelectrodes maintenance, near the welding working place.
They preserve the electrodes from moisture avoiding
hydrogen inclusion in the welding joint.
2014-698_LE
W000383150
5 kg
capacity
ELECTRODE HOLDERS
GEMEN
GA T
EN
CAIMAN 400 COBRA STUBBY QUALITY
EN
Q400 A at 35%. Q300 A at 35%. Q400 A at 35%.
T GA
GEMEN
2004-215_ret
2004-491
QPolyamide handle, fibre QLight and multi purpose. QWell known, fibrere glass
glass reinforced. single part headd + spare parts
Lever type W000010881 Lever type available.
W000010568 with opened with closed QRight hand thread.
head head W000010036
WELDING ACCESSORIES
4 ROWS 4 ROWS STAINLESS
AINLESS STEEL HEAD,
STEEL WIRES
S STEEL WIRES
ES WOODEN N HANDLE
2004-632
0951-012
KITS ARC
Ready-to-use MMA accessories kit for an optimized time saving.
2
QBuilt-in Power Effective input current 11 A
Factor Control. Open circuit voltage 49.5 V
QSupplied complete Welding current 10 - 160 A
with 16A plug. YEARS 35% 160 A
Duty cycle
QTIG DC or MMA mode. 60% 140 A
(at 40 °C)
QHF and TIG Lift arc striking. 100% 120 A
Protection index IP 23 S
QPre and Post gas adjustment.
2010-890
Weight 9.5 kg
Q2T / 4T mode.
Dimensions 205 x 345 x 460 mm
EN 60974.1 / EN 60974.10 /
Standards
EN 61000-3-2/12
PFC
LONG : 70 m Item number:
MOTOR GENERATOR SECTION :
COMPATIBLE 3 x 2.5 mm2 Power source alone W000273517
POWER FACTOR
CONTROL This equipment is designed for industrial and professional use only
CITOTIG CITOTIG
1800 FORCE 2200 FORCE
Primary Voltage (50-60Hz) 230 V (+/- 20%) - 1 ph
Effective input current 11 A 12 A
Open circuit voltage 50 V
Welding current 5 - 160 A 5 - 220 A
35% 160 A (40%) 220 A
Duty cycle
60% 140 A 180 A
2014-598
(at 40 °C)
100% 130 A 150 A
Dimensions 205 x 345 x 460 mm
Weight 9.5 kg
Protection index IP 23 S
Standard EN 60974-1 / EN 60974-10 / EN 61000-3-2/12
Item number:
Power source alone W000382579 W000382580
Universal trolley W000375730 MOTOR GENERATOR
2015-142-ret
3
YEARS
MOTOR GENERATOR
WATER COOLING COMPATIBLE
Cellulosic
2009-562
QUp to 230 A at 40% available on a single QA compact machine, with possibility YEARS
phase machine for 240 model. of user customization.
QEasy to move: only 17 kg. QOffshore and repair applications using
QMotor generator compatible. TIG and MMA welding.
QDigital display. QProcesses TIG DC - AC - Synergic pulse * -
QTACK FOR THIN for perfect tack welding *. Compotig process (MIX AC/DC *) - pulse welding *.
Q10 programs memory *
PFC
QBI LEVEL for an improved cycle POWER FACTOR
with two current levels *. MOTOR GENERATOR CONTROL WATER COOLING
* On the ADVANCED versions. COMPATIBLE
3
CITOTIG 240 CITOTIG 315
AC/DC (W) AC/DC (W)
230 V 230 / 400 V
YEARS Primary Voltage (50-60Hz)
(+/-15%) - 1 ph (+/-10%) - 3 ph
MOTOR GENERATOR
COMPATIBLE Absorbing power
6.0 kVA -
at maxi. intensity
Open circuit voltage 58 V DC -
35% 230 A (at 40%) 300 A / 22 V
Duty cycle
60% 200 A -
WATER COOLING (at 40 °C)
100% 170 A 200 A / 18 V
Welding current 3 to 230 A 2 to 300 A
PFC Fuse size (A) - 32/20A
POWER FACTOR Dimensions 475 x 200 x 405 mm 545 x 290 x 660 mm
CONTROL Weight 17 kg (25 kg) 42 kg
Protection index / class IP 23 C / H
Cellulosic Standard EN 60974-1 / EN 60974-10
Item number:
Power source ADVANCED version W000275842 -
Power source EASY version W000381667 -
Power source alone - W000403604
Trolley W000404146 (CART 4)
10 Cooler - W000403941 (COOLERTIG 4)
ldline.eu
www.we
PROTIG NG S INDUSTRIAL
RANGE
Ergonomic handle
with button (EB) The modular system brings a increased control over the power source.
All torches are delivered with a single button module.
The best TIG torches with an advanced
ergo-design, using a colored soft grip
2010-650_ret
for a maximum welder comfort.
Connectors
PROTIG III S Air cooled
Air cooled
Water cooled
MODEL 10 20 30 40
Duty cycle 35% 125 A 150 A 200 A 250 A
Duty cycle 60% 80 A 100 A 130 A 200 A
back cap long long long long
Fitted
nozzle Ø 10 mm Ø 10 mm Ø 12 mm Ø 12 mm
as standard
electrode Ø 1.6 mm Ø 2.0 mm Ø 2.4 mm Ø 2.4 mm
Item number in length 5 meters*:
PROTIG NG S (EB-C5B/S) W000278394-2 W000278396-2 W000278398-2 W000278400-2
PROTIG III S (RL-C5B/S) W000382715-2 W000382717-5 W000382719-2 W000382721-2
Water cooled
MODEL 10 W 35 W 40 W
Duty cycle 100% 220 A 350 A 450 A
back cap long long long
Fitted
as standard
nozzle Ø 12 mm Ø 15 mm Ø 14 mm Wear parts box
electrode Ø 2.4 mm Ø 4.0 mm Ø 4.8 mm
A complete kit for
Item number in length 5 meters*: all applications.
PROTIG NG S (EB-C5B/S) W000278402-2 W000278404-2 W000278406-2 The kit includes
PROTIG III S (RL-C5B/S) W000382723-2 W000382725-2 W000382727-2 electrode collets,
* Available in 8 m (see general catalog) nozzles, back caps
and collet body.
Other buttons
2011-005_ret
Item number
Other buttons Designation Item number
4.7 Kohm 10 Kohm 1 2 3
Torch 10/10W W000306441
1 Horizontal command W000279370 WP10529-3 Torch 20 W000306442
2
Vertical command W000279246 WP10529-4 Torch 30 W000306443
buttons module
3 3 WP10529-2 - Torch 40/35W W000306444
4 Blade W000279245 - 4
Torch 40W W000306445 11
WTT2 STANDARD RANGE
Simple and reliable, this range is adapted to the most common applications.
Handle, made
with high
temperature Easy pivoting
silicon rubber. handle
Standardised
(for EB handles).
wear parts.
Extra-flexible high
performance cable.
New connector :
Connections Shaped cable output for a better robustness. Handle
2016-206
2016-207
2016-206
2016-209
C5B S
Air cooling Water cooling
2010-688
Air cooling RL
MODEL WTT2 9 WTT2 17 WTT2 26
60% 80 A 100 A 130 A
Duty cycle at 40 °C
35% 110 A 135 A 180 A
back cap Long
Original equipment nozzle Ø 10 mm Ø 12 mm
2010-685
electrode Ø 1.6 mm Ø 2.0 mm Ø 2.4 mm EB
Length * 4m
S W000278878 W000278883 W000278888
RL
C5B W000278879 W000278884 W000278890
Connection
EB
C5B W000278875 W000278882 W000278887
2010-686
2011-203
S W000278893 W000278897
RL
Connection
S W000278891 W000278895
EB
C5B W000278892 W000278896
EB-FLEX C5B/S W000382786 W000382788 Designation Item number
Kit WTT2 9/9V/20W W000371535
* Available in 8 m (see general catalog)
12 Kit WTT2 17/26/18W W000371536
ldline.eu
www.we
Tungsten electrodes
WP - WC 20 - WL 20 - WS 20
2006-528
150 mm length (except for WS 2 175 mm).
WP Pure tungsten WLa15 Lanthanum 1.5% WCe 20 Cerium 2% WLa 20 Lanthanum 2% WS 2 Rare earths 2%
Ø mm
AC current AC and DC current DC current AC and DC current AC and DC current
1.0 W000010009 W000402632 W000010022 W000010373 W000335166 GEMEN
GA T
EN
1.6 W000010010 W000402663 W000010023 W000010016 W000335167
2.0 W000010011 W000402664 W000010024 W000010017 W000335168 QUALITY
EN
T GA
GEMEN
2.4 W000010012 W000402665 W000010025 W000010018 W000335169
3.0 W000010013 W000402666 W000010026 W000010019 W000335170
3.2 W000010014 W000402667 W000335150 W000010020 W000335171
4.0 W000010015 W000402668 W000010028 W000010021 W000335172
ST M
Available in other lengths and types (see general catalog) OP IU
THOR
TIG SHARP
Portable electric tool for tungsten electrodes sharpening. All you need to sharpen your
tungsten electrodes delivered in a practical metal case, for an accurate action and an
2002-002
incredible result (perfect grind, very precise grinding angle, longitudinal sharpening,
precise and symmetrical angle).
QVoltage: 220-230 V. FEATURES & BENEFITS
QPower: 400 W.
QS tandard blue head for the electrodes
QAmperage: 1.8 A.
diameter 1.6 / 2.0 / 2.4 / 3.2 mm.
QDisk speed: 30.000 rpm. W000011035
QNozzle connectable on a vacuum cleaner
for extraction of tungsten dusts.
INVERTER
TECHNOLO
GY Wear part box
OPTICLEAN II for TIG torch
New inverter-technology installation
for cleaning, polishing and marking
2014-157
2011-203
of stainless steel.
Avantages :
QAesthetic: no stains on the steel after
cleaning.
QEcological: no need to wear gloves or protective
masks with the neutral solution. Large outdoor
areas are not required: no toxic vapor emissions,
no need for water treatment plant.
QEconomic: no passivation after cleaning. PROTIG III S / PROTIG NG S
Technical data:
QGain of productivity: no need to dip the pump into
OPTICLEAN II Designation Item number
the liquid and to interrupt the operation several
Primary Voltage 230 V - 1 ph Torch 10/10W W000306441
times.
Improvement of the quickness while increasing Frequency 50/60 Hz Torch 20 W000306442
current. Capacit 450 W Torch 30 W000306443
Efficiency increased with the carbon blush. Electrode Voltage 10/30 V AC/DC Torch 40/35W W000306444
Isolation Class IP 23 Torch 40W W000306445
Noise level < 10 dB (A)
OPTICLEAN II machine - W000382322 WTT2
Machine weight (empty) 7 kg
Marking Kit - W000271936 Machine dimensions 300 x 230 x 240 mm Designation Item number
Kit WTT2 9/9V/20W W000371535
Kit WTT2 17/26/18W W000371536
13
RODS FOR TIG WELDING
TIG welding of carbon steels
CARBOROD 1 Classification
Ø (mm) Length Quant. / Quant. Item number
Shielding gas according EN ISO 14175: I1. (mm) Box / Carton
A 5-18
1.6 1000 Pack 5 W000283322
Features: ER 70S-6
2.0 1000 Pack 5 W000283323
CARBOROD 1 is suitable for TIG welding of mild and C-Mn steels. and is generally EN ISO 636-A 2.4 1000 Pack 5 W000283324
W42 4 W3Si1 3.2 1000 Pack 5 W000283325
used for the root pass and to support welding when no back pass is possible.
Excellent mechanical and toughness properties for low temperature applications,
down to -50 °C.
Shielding gas according EN ISO 14175: I1. AWS A 5-10 1.6 1000 Pack 5 W000283582
ER 5356 2.0 1000 Pack 5 W000283583
Features: EN 18273 2.4 1000 Pack 5 W000283584
ALUROD AlMg5 is a TlG welding rod depositing Al-5Mg weld metal. ALUROD AlMg5 S Al 5356 3.2 1000 Pack 5 W000283585
is used for the welding of Al-Mg alloys and Al-Mg-Zn alloys. The rod is also suitable 4.0 1000 Pack 5 W000283586
for the welding of dissimilar aluminium alloy grades containing up to 5%Mg and components which are
subsequently to be anodised. ALUROD AlMg5 is the most widely used Al welding wire, because of the weld
metals high yield strength and high resistance to corrosion, including seawater.
Shielding gas according EN ISO 14175: I1. AWS A 5-10 2.0 S 200 Pack 5 W000283559
ER 4043 2.4 B 300 Pack 5 W000283560
Features: EN ISO 18273 3.2 B 300 Pack 5 W000283561
ALUROD Al Si 5 is a TlG welding rod depositing Al-5Si weld metal. S Al 4043
Good weld bead aspect. Good weldability, the weld metal is not sensitive to cracking.
Suitable for dissimilar joining in both wrought and cast form. ALUROD AlSi5 is used for welding
of aluminium and aluminium alloys with a silicon content up to 5%.
14
WARRANTY
STEP CONTROLLED MIG/MAG WELDERS
CITOSTEP machines set the standard for MIG and flux-cored welding
3
YEARS
NEW
in light industrial job shop fabrication, maintenance or repair work.
The range begins with the CITOSTEP 255C, which is an ideal machine
for welding of thin sheet metal applications.
The CITOSTEP 305C is a more powerful version, still capable of welding
thin material but with the extra power required for light fabrication work.
The CITOSTEP 355C truly is a multi-purpose model, ideal for both thin
sheet applications and light to medium fabrication work.
It is equipped with SYNERGY to support easy control by the welder.
CITOSTEP 255C /
305C / 355C
FEATURES & BENEFITS
QExcellent welding behavior
with Argon Mix and 100% CO2.
QVoltage selectors with multiple steps
for precise adjustment.
QTwo chokes tabs giving superb
arc characteristics.
QExcellent drive system and powerful
motor guarantee consistent wire feed
speed.
QProducts developed and tested under
the hardest conditions (TRUE HD)
to grant the reliability you need.
15
STEP CONTROLLED MIG/MAG WELDERS
NEW
CITOSTEP 355S, 425S & 505S
CITOSTEP power sources along with WF24 & WF24S wire feeders offer unrivalled choice of step controlled MIG machines.
The WF24 and 24S are portable wire feeders with stabilised wire feed speed.
They include a rugged 4 roll wire feed unit, featuring cold inch, gas purge and built-in burn back facility.
They can be mounted on the power source with a swivelling, wheeled carriage.
The Synergic control of the WF24S allows the operator to simply set the welding
WARRANTY
voltage and start welding: wire feed speed adjusts automatically.
Item number:
Power source W000403592 W000403593 W000404225
WF24 WF24S
Drive rolls 4
WFS 1 - 20 m/min
Wire size 0.6 - 1.6 mm
Weight 17 kg
Dimensions H x W x D 440 x 275 x 636 mm
Burn Back
Cooling Unit
Run in COOLER 25
Meters Cooling power 230 V - 1 ph
2/4 step trigger Cooling power 1.05 kW
Synergy - Maximum pressure 3.5 bar
FAN AS NEEDED
Cold Feed Dimensions 748 x 238 x 248 mm
Gas Purge Weight 17 kg
Spot Welding -
Item number:
Gas Pre Flow -
COOLER 25 W000403601
Item number:
Wire feeder W000403599 W000403600 Source / Wire feeder cable gas K10347-PG-xxM*
Source / Wire feeder cable water K10347-PGW-xxM*
* xx = 5, 10, 15, 20, 25 m
16
COMPACT INVERTERS FOR MIG/MAG WELDING
CITOMIG 185MP & 210MP
NEW
CITOMIG 185MP & 210MP are small but powerful single phase inverter based, multiprocess machines.
They are fully professional machine packed with features, into a small light-weight compact housing
maximising portability.
These features make our range extremely versatile; they can be used for many different applications
and can be easily moved around production facilities or transported to any location effortlessly. 3
multi
in
process
These units can be powered from the mains supply or are also suitable for use with motor generators.
CV MIG
The CITOMIG 185MP & 210MP units have been equipped with Power Factor Correction (PFC), FCAW
a feature which supports high output welding current from a single phase 230V1Ph 50/60Hz STICK
supply allowing it to be used with a long (up to max 100m) primary extension cable.
The welding performance gives excellent results for Steel, Stainless Steel
and Aluminium (using 200mm dia. spools).
WARRANTY
2
YEARS
PFC
POWER FACTOR
CONTROL 2 ROLLERS MOTOR GENERATOR
COMPATIBLE
CITOMIG CITOMIG
LONG : 70 m
SECTION : 185MP 210MP
3 x 2.5 mm2 Primary Voltage (50-60Hz) 230 V - 1 Ph 115 / 230 V - 1 Ph
Current Range 20 - 200 A
5
Duty cycle at 40 °C 200 A / 24 V @ 25%
in Fuse Size (slow) 16 A
multi Weight 17.3 kg
process
Dimensions H x W x D 396 x 246 x 527 mm
CV MIG
Protection Class IP 23
CV SYNERGIC
FCAW Item number:
STICK
LIFT TIG Power source W000403579 W000403578
17
COMPACT INVERTERS FOR MIG/MAG WELDING
NEW
CITOSTEEL 255 & 325
C & C PRO
CITOSTEEL are inverter based compact welders
for MIG/MAG and MMA welding.
They are available as either the basic “C” version
(Volt & WFS controls and digital volt/ammeters)
or the advanced “C PRO” version (color screen WARRANTY
with 25 synergic curves) with two welding
outputs, 250 or 320A. AR
C PE 3
YEARS
RF
O R MA
M
FRIENDLY
& *
CITOSTEEL 255 & 325 can be used both for MIG & STICK welding of steel,
stainless steel, aluminium and MIG brazing applications.
CITOSTEEL 255 CITOSTEEL 325
C & C PRO C & C PRO
Primary Voltage (50-60Hz) 3 x 400 V (+/- 15%)
Effective primary
14.7 A 19.6 A
consumption (A)
Efficiency at max current 86% 88%
Idle Power (W) < 25 W
Power factor
CITOSTEEL 0.85 0.90
at max current
C VERSION C PRO VERSION Duty cycle (@ 40 °C)
MIG & FCW welding @ 40% - 320 A
Welding processes @ 60% 250 A 250 A
Stick welding
Setting manual auto/manual @ 100% 195 A 195 A
Welding parameters digital meters large colour screen Current range max 10 A / 250 A 10 A / 320 A
Synergic modes - 25 preset Dimensions (LxWxH) 900 x 540 x 870 mm
JOB Mode / A-B - Weight 67 kg
ARCFX™ - Item number:
Language selection -
C version W000404105 W000404106
Memory function -
USB connection - C PRO version W000404107 W000404108
18
HIGH TECH INVERTERS FOR MIG/MAG WELDING
CITOSTEEL III 420 / 520
FEATURES & BENEFITS WARRANTY
4 ROLLERS
2016-367_ret
MOTOR GENERATOR
COMPATIBLE
SYN
SYNERGIC
SETTINGS
2015-805
Q99 programs. QReduced weight, body
QCall programs with trigger. WATER COOLING
engineered in aluminium.
QWelding cycle sequencer. QEasy to carry.
2016-064
Weight 29 kg
Standard EN 60974-1 & EN 60974-10
r
Item number: Optional watens
Power source W000385051 cooled v e rs io
T
Trolley
2010-464
2011-186
ffor installation
COOLER III
On demand
Universal
trolley
W000375730
Anti-dust filter
for power source protection TROLLEY III
W000383000
Dust filter
2011-186
W000373703
2015-030
* Eco Friendly
Welding and Cutting.
This label is awarded by
Aluminium welding kit Remote Oerlikon to products that
contribute to a sustainable
ALUKIT DVU 1.0-1.2 A composition of wire control development and/or to
guides and rollers for perfect ensure better working
W000277622 aluminium welding. RC SIMPLE (10 m) conditions for welders.
W000275904
20
HIGH TECH INVERTERS FOR MIG/MAG WELDING
CITOPULS III is the very latest innovative MIG/MAG advanced welding machines offering
the welding market superior quality welding. CITOPULS III has been designed in a modular FRIENDLY
form for easy workshop mobility to suit all welding applications (manual or automatic).
arameter selection
These machines offer easy to understand process options and parameter & *
via the machine control panel or the wire feed unit.
2016-356_ret
QStorage of 100 welding programs
Item number:
Power source W000383663 W000383664
MODULAR
Wire feeder
DMU P400 DMU P500 expert
pert WATER COOLING
Rollers 4 drive rollers
Cooling Unit
Wire speed 1 to 25 m/min
Wire Steel/stainless steel 0.6 - 1.6 mm COOLER III
diameter Cored wire /Aluminium 1.0 - 1.6 mm Cooling power 1.3 kW
Control 2 potentiometers 2 encoders Maximum pressure 4.5 bar
Display - 2 displays + LCD Dimensions 720 x 280 x 270 mm
Protection / Insulation IP 23S / H Weight 16 kg
Standard EN 60974-5 - EN 60974-10
Item number:
Dimensions 265 x 590 x 383 mm
Cooling unit W000273516
Weight 17.5 kg
21
ADVANCED MULTI-PROCESS WELDING EQUIPMENT
CITOWAVE III
FEATURES & BENEFITS FRIENDLY
QRegulation and numerical controls: total control of wave form
alignment for process improvement and for exact parameter
NEW & *
reproduction.
QIncreased power (Voltage/Current): increase the arc rigidity WARRANTY
3
with pulsed mode, which improves penetration and allow
a good fusion with usually “hard-to-weld” wires.
QMore arc transfer regimes: Soft current, Pulsed, SSA,
YEARS
SSP, SM, CDP, MIG brazing, MMA, PR Spray and HPS.
QControl of aluminium welding: special equipments,
adapted processes (SM: Spray Modal™), essential
options for demanding applications (reduction of
micro porosity and increased penetration). WATER COOLING
QMore memory: 153 welding synergies are available
2016-401_ret
for all welding applications. These machines also
include 100 programme memory selected via
the wire feeder, remote control or CITORCH ME range.
QMore controls: parameters monitoring, indication
of the defects, parameters blocking on several MODULAR
Item number:
CITOWAVE III 420 CITOWAVE III 520 Cooling unit W000273516
Primary Voltage (50-60Hz) 400 V (+/-20%) - 3 ph
Wire feeder
Primary consumption at I max. 27.1 A 33.9 A
Welding current 15 - 420 A 15 - 500 A DMU W500
420 A @ 60% 500 A @ 60% Weight 16 kg
Duty cycle at 40 °C
350 A @ 100% 450 A @ 100% Dimensions (l x b x h) 603 x 262 x 446 mm
Dimensions (L x l x h) 720 x 295 x 525 mm Motor rollers 4
Weight 36 kg 40 kg Wire diameter range 0.6 to 1.6 mm
Protection index IP 23 Wire speed range 0-25 m/min
Standards EN 60974-1 / EN 60 974-10 Spool diameter 300 mm
2009-466
Air cooled standard torches
CITORCH M 200 A (CO2)
0.6 - 1.0 mm W000275424 W000275425 W000275426
181 T 180 A (Ar+CO2)
CITORCH M 270 A (CO2) 0.8 - 1.0 mm
W000345085 W000345086 W000345087
241 250 A (Ar+CO2) (1.2 mm) CITORCH M
2006-229
CITORCH M 350 A (CO2) 1.0 - 1.2 mm 241
W000345091 W000345092 W000345093
341 T 320 A (Ar+CO2) (1.6 mm)
CITORCH M 420 A (CO2)
1.0 - 1.6 mm W000345097 W000345098 W000345099
441 380 A (Ar+CO2)
PUSH-PULL TORCHES
(double potentiometer
to set up the parameters)
NEW
2016-007
Wire
Designation Duty cycle
diameter
Length Item number PROMIG PP
PROMIG PP 341 (NECK 45°)
2016-007
Air cooled
PROMIG PP 341 350 A @ 60%
441W (NECK 45°)
1.0 - 1.6 mm 8m W000385861
(neck 45°) (CO2)
Water cooled
PROMIG PP 441W 420 A @ 60%
To be transformed in 0° neck, additional parts are to be ordered:
1.0 - 1.6 mm 8m W000385863
(neck 45°) (CO2) QFor PROMIG PP 341: QFor PROMIG PP 441W:
Neck 0°: W000385867 Neck 0°: W000385868
Internal liner 0°: Internal liner 0°:
W000385869. W000385871.
23
LGS2 STANDARD RANGE
Simple and reliable, this range is adapted to the most common applications.
Thin plates, Thin plates, Thin plates, Vessel manufacture, Heavy duty,
Applications
automotive industry light fabrication light fabrication steel structures high production
Item number
3m W10429-15-3M W10429-25-3M W10429-24-3M W10429-36-3M W10429-505-3M
4m W10429-15-4M W10429-25-4M W10429-24-4M W10429-36-4M W10429-505-4M
5m W10429-15-5M W10429-25-5M W10429-24-5M W10429-36-5M W10429-505-5M
24
ldline.eu
www.we
Features:
QDimensions 36 x 24 x 5 cm.
MIG-BOX
LGS2 150G
QPlastified pieces guide included.
QUntill 80 consumables. W000387234
ANTI-SPATTERS ANTI-CORROSION
GEMEN
GA T
EN
2007-395
2010-382
NON DESTRUCTIVE
CRACKS Classification
EN 3452-2, FLUXO
DETECTION ASME, RCCM
APPROVED cleaner, penetrant and developer.
W000374825
25
MASSIVE WIRES FOR MIG/MAG WELDING
Welding of mild steels Welding of unalloyed and low alloyed steels
ULTRAFIL CARBOFIL / CARBOFIL GOLD
Shielding gas (according EN ISO 14175): M21 or C1. Shielding gas (according EN ISO 14175): M21 or C1.
Features: Features:
Copper coated wires suitable for all type of general applications. Special coated wires to be used where a reliable consumable is required.
The best product for everyday use. Good performances in terms of feedability Controlled chemical composition and best surface quality, free from residuals.
and weldability, with optimized value for money. As advantages an excellent electrical contact that
gives tight and stable arc, enhanced feedability CARBOFIL 1 /
ULTRAFIL 1 ULTRAFIL 1 and weldability. Suitable both for manual and CARBOFIL 1 GOLD
Ø Layer Weight Item number mechanized welding. Classification
(mm)
Spool wound (kg) Classification
0.8 PLW 16 E08K016P6E11 AWS A 5-18 AWS A 5-18
1.0 B 300 PLW 16 E10K016P6E11 ER 70S-6 ER 70S-6
1.2 PLW 16 E12K016P6E11 EN ISO 14341-A EN ISO 14341-A
0.8 PLW 16 E08L016P6E11 G 42 3 C1 3Si1 / G 42 3 C1 3Si1 /
1.0 BS 300 PLW 16 E10L016P6E11 G 42 4 M21 3Si1 G 42 4 M21 3Si1
1.2 PLW 16 E12L016P6E11
ULTRAFIL 1A CARBOFIL 1A /
ULTRAFIL 1A
CARBOFIL 1A GOLD
Ø Layer Weight Item number
(mm)
Spool wound (kg) Classification Classification
0.8 PLW 16 E08K016P3E11 AWS A 5-18 AWS A 5-18
1.0 B 300 PLW 16 E10K016P3E11 ER 70S-6 ER 70S-6
1.2 PLW 16 E12K016P3E11 EN ISO 14341-A
0.8 PLW 16 E08L016P3E11 EN ISO 14341-A
G 46 4 C1 3Si1 / G 46 4 C1 4Si1 /
1.0 BS 300 PLW 16 E10L016P3E11 G 46 5 M21 3Si1
1.2 PLW 16 E12L016P3E11 G 46 5 M21 4Si1
CARBOFIL ELITE
Shielding gas (according EN ISO 14175): M21 or C1.
Features:
Special coated wires for the most exigent CARBOFIL 1 CARBOFIL 1A
customers welding at very high parameters. ELITE ELITE
Controlled chemical composition and Classification Classification
production process for the optimal bead profile.
AWS A 5-18 AWS A 5-18
Our premium product for the most demanding ER 70S-6 ER 70S-6
applications, ideal for heavy fabrication and EN ISO 14341-A EN ISO 14341-A
automotive with mechanized welding and G 42 3 C1 3Si1 / G 46 4 C1 4Si1 /
complex setups, also with long liners. G 42 4 M21 3Si1 G 46 5 M21 4Si1
Exceptional arc stability, low presence of
spatters and silicates for a clean bead profile
are the main features of CARBOFIL ELITE. CARBOFIL 1A ELITE
Ø Spool Layer Weight Item number
CARBOFIL 1 ELITE (mm) wound (kg)
Ø Layer Weight 1.0 16 H10K016PTE11
B 300
(mm) Spool wound (kg) Item number
1.2 16 H12K016PTE11
1.0 16 H10K016PSE11 1.0 16 H10V016STE11
B 300 BS 300S
1.2 16 H12K016PSE11 1.2 16 H12V016STE11
1.0 16 H10V016SSE11 1.0 300 H10D300ETE11
BS 300S
1.2 16 H12V016SSE11 1.2 300 H12D300ETE11
1.0 600 H10D600ESZ11 1.0 600 H10D600ETZ11
1.2 600 H12D600ESZ11 1.2 600 H12D600ETZ11
DRUM
1.0 300 H10D300ESE11 1.0 450 H10D450ETE11
DRUM
1.2 300 H12D300ESE11 1.2 450 H12D450ETE11
1.0 450 H10D450ESE11 1.2 250 H12D250ETE11
1.2 450 H12D450ESE11 1.0 800 H10D800ETZ11
26
SO LID WIRES
STAINLESS STEEL
WE PRODUCE OUR has over 70 years of es.
experience
n in the Netherlands wir
Our factory in Nijmege ding quality electrodes, cored and solid ility which
SOLID WIRES producing world lea
a state of the art fully
autom ate d pro du cti on fac
wires.
We have invested in st in class stainless steel MIG, TIG & SAW
manufac tur es be
Welding of stainless and special steels Classification
AWS A 5-9
INERTFIL 308L Si Classification
INERTFIL 316L Si ER 316L Si
AWS A 5-9 EN ISO 14343-A
Shielding gas (according EN ISO 14175): M13. Shielding gas (according EN ISO 14175): M13.
ER 308L Si G 19 12 3 L Si
Features: EN ISO 14343-A Features:
INERTFIL 308LSi is a solid MAG welding wire, supplied precision G 19 9L Si INERTFIL 316LSi is a solid MAG welding wire, supplied precision layer wound,
layer wound, depositing a low C-19Cr9Ni weld metal. depositing a low C-19Cr12Ni2.5Mo weld metal. INERTFIL 316LSi is used for welding
INERTFIL 308L Si is used for welding of 304 and 304L grade stainless steel. The weld metal of 316 and 316L grade stainless steels, in a wide range of applications including the
provides good corrosion resistance to intergranular attack from a range of liquid media. fabrication of pipe and plate. The higher Si level results in a smooth weld bead shape
It is used for a wide range of applications including pipework and plate fabrication, vessel and even appearance with excellent toe blending particularly in fillet welds. The weld
production etc. The low carbon reduces the propensity to intergranular carbide precipitation, metal has a high resistance to pitting and crevice corrosion by non-oxidising acids.
which increases the resistance to Used for applications with service
Ø Layer Weight Ø Layer Weight Item number
intergranular corrosion without the use of (mm) Spool wound (kg) Item number temperatures <400°C. (mm) Spool wound (kg)
stabilizers. The increased silicon content 1.0 BS300XP 15 W000283007 1.0 BS300XP 15 W000283065
results in increased weld pool fluidity to 1.2 BS300XP 15 W000283013 1.2 BS300XP 15 W000283070
give a smooth deposit appearance. 1.6 BS300XP 15 W000283018 1.6 BS300XP 15 W000283075
UMINIUM
WE PRODUCE OUR AL
SOLID WIRES
Welding of aluminium and light alloys
ALUFIL Al Mg 5 Classification ALUFIL Al Si 5 Classification
Shielding gas (according EN ISO 14175): I1. AWS A 5-10 EN ISO 18273
Shielding gas (according EN ISO 14175): I1.
ER 5356 S Al 4043
Features: Features:
EN 18273 AWS A 5.10
ALUFIL AlMg5 is a solid MlG welding wire, supplied precision S AI 5356 Solid wire that deposits a 5% Si alloy. Excellent weldability ER 40 43
layer wound, depositing Al-5Mg weld metal. ALUFIL AlMg5 and good mechanical characteristics. Particularly suitable
is used for the welding of Al-Mg alloys and Al-Mg-Zn alloys. The wire is also for welding Anticorodal 163 and 11 alloys. Due to its Si-alloying the weld pool is
suitable for the welding of dissimilar aluminium alloy grades containing up to readily controllable. The weld is not sensitive for cracking and the surface is bright
5%Mg and components which are to be which are to be subsequently anodised.
Ø Layer Weight Ø Layer Weight
subsequently anodised. ALUFIL AlMg5 (mm) Spool wound (kg) Item number ALUFIL AlMg5 is the most popular (mm) Spool wound (kg) Item number
is the most popular aluminium welding 0.8 S 200 PLW 2 W000283216 aluminium welding wire, because of its 1.0 PLW 7 W000283183
wire, because of its high yield strength 0.8 BS 300 PLW 7 W000283218 high yield strength and high resistance 1.2 BS 300 PLW 7 W000283184
and high resistance to corrosion, 1.0 S 200 PLW 2 W000283219 to corrosion, including seawater. 1.6 PLW 7 W000283185
including seawater. 1.0 PLW 7 W000283221
1.2 BS 300 PLW 7 W000283225
1.6 PLW 7 W000283229
27
FLUX CORED WIRES
Flux Cored Wire for MAG welding of carbon steels
FLUXOFIL 14 HD FLUXOFIL 19 HD
Shielding gas: M21 or C1. Classification Shielding gas: C1. Classification
Features: EN ISO 17632-A Features: EN ISO 17632-A
FLUXOFIL 14 HD is high quality seamless copper coated T 46 3 P M 1 H5 FLUXOFIL 19 HD is high quality seamless copper coated T 46 3 P C 1 H5
rutile flux cored wire for welding of 355-460Mpa mild AWS A 5.20 rutile flux cored wire for welding of 355-460Mpa mild AWS A 5.20
steels. The wire meets impact requirements at -30°C E 71T-1M-JH4 steels. The wire meets impact requirements at -30°C E 71T-1C-JH4
(M21) and is characterized by very low content o diffusible AWS A 5.36 (C1) and is characterized by very low content o diffusible AWS A 5.36
hydrogen - below 4ml/100g. FLUXOFIL 14 HD helps E 71T1-M21A2-CS1-H4 hydrogen - below 4ml/100g. FLUXOFIL 19 HD helps E 71T1-C1A2-CS1-H4
to generate savings in welding costs to generate savings in welding costs
due to very good performance with Ø Layer Weight Item number due to very good performance and Ø Layer Weight Item number
M21gas and 89-90% electrode (mm) Spool wound (kg) 89-90% electrode efficiency. All (mm) Spool wound (kg)
1.2 S 200 PLW 5 W000281098 1.2 S 200 PLW 5 W000281118
efficiency. All positional weldability. positional weldability. Suitable for
1.2 B 300 PLW 16 W000281099 1.2 B 300 PLW 16 W000281119
Suitable for semiautomatic and semiautomatic and robotic welding.
1.4 B 300 PLW 16 W000281102 1.4 B 300 PLW 16 W000281121
robotic welding. 1.6 B 300 PLW 16 W000281105 1.6 B 300 PLW 16 W000281122
28
FLUX CORED WIRES
Flux cored wire for MAG welding of stainless steels
with low emission of Chrome VI in the welding fumes
CLEARINOX F 316L
Classification
Shielding gas (according EN ISO 14175): M21.
EN ISO 17633-A
Features: T 19 12 3 L PM 1
CLEARINOX F 316L is a rutile flux cored wire with a fast-freezing slag suitable for the welding of unstabilized
AWS A 5.22
and stabilized corrosion resistant CrNiMo steels. The weld metal is resistant to intergranular corrosion up to 400°C, E 316L T1-1
and non-scaling up to 800°C. CLEARINOX F 316 L PF exhibits outstanding, almost spatter-free, welding properties with
very easy slag removal from fillet welds, even in acute angles. The weld beads produced are finely rippled without Ø Layer Weight
Spool Item number
undercut. Clearinox can reduce the exposure to CrVI thanks to the reduced welding fume (up to -40%) and the lower (mm) wound (kg)
CrVI concentration in the welding fume. Use of CLEARINOX flux cored wires conjunction with a fume control strategy may 1.2 BS 300 PLW 15 W000387177
significantly reduce the exposure of CrVI to welders. Due to its fast-freezing slag, CLEARINOX F 316 L-PF is used for welding
in the horizontal (PD), overhead (PE) and vertical-up (PF) positions.
29
SINGLE PHASE INVERTERS FOR PLASMA CUTTING METALWORK
CITOCUT 8K CITOCUT 8
PT 40-8 torches PT 40-8 torches
Portable solution with an integrated WARRANTY Lightweight and powerful portable high tech WARRANTY
compressor for manual plasma cutting.
FEATURES & BENEFITS
2
YEARS
solution for manual plasma cutting.
FEATURES & BENEFITS 2
YEARS
QHigh tech: microprocessor control and digital display QHigh tech: microprocessor control and digital display
to ease the use of the equipment. to ease the use of the equipment.
QHigh duty cycle for a maximum QHigh quality contact cut: genuine
efficiency. cut up to 8 mm.
Q8 mm quality cutting QLightweight: easy
with only 25 A. to transport.
QLow air and current QReliable and strong:
consumption. robust design.
2
on a high tech portable inverter.
FEATURES & BENEFITS
QMaximum cutting thickness: 12 mm.
YEARS PFC
POWER FACTOR
QPilot arc operating mode, which gives CONTROL
the possibility to work on painted or coated metals.
QParticularly suitable for cutting the overlapped
sheets that are commonly used in the car bodies.
QSubstantial energy savings and wide supply
MOTOR GENERATOR
voltage tolerance (+15%/-20%). COMPATIBLE
Packages including:
CITOCUT 8K (1) CITOCUT 8 (1) CITOCUT 12MV HPF
• a power source,
Power supply (+/- 10% - 50/60 Hz) 230 V - 1 ph 230 V - 1 ph 115 V / 230 V - 1 ph
• a torch 4 m,
Primary effective consumption 9A 11 A 19 A / 11 A
• an earth cable with clamp,
Pressure and airflow - 5.5 bars - 180 l/min. -
• a 3 m primary cable.
25% 25 A at 40% 25 A at 60% 30 A at 30% / 30 A at 35%
Duty cycle (10 min at 40 °C) 60% 20 A at 60% - 23 A at 60% / 25 A at 60%
100% 15 A at 70% 20 A at 100% 20 A at 100% / 22 A at 100%
Weight 16 kg 8 kg 13 kg Item number:
Protection index IP 23S Plasma torch PT 40-8 W000401849
Standards EN 60974-1 / 60974-7 / 60974-10 Class A / EN 61000-3-11 & 12 Plasma torch PT 40-12 W000402337
Item number:
Package W000401627 W000401624 W000401630
30
THREE PHASE INVERTERS FOR PLASMA CUTTING
WARRANTY
3
CITOCUT 60 & 100 25 mm
30 mm
Severance
Recommended
FEATURES & BENEFITS
YEARS
The concept for plasma cutting focuses on three elements: Cutting capabilities
QStarting - innovative advanced arc starting without HF. QFaster - higher travel speeds CITOCUT 60
QPerformance - Innovative advanced electrode and and plate thickness.
nozzle design. QFlexible - Multiple torch configurations.
QLonger lifetime - Innovative advanced design QVariety of materials - Mild steel,
eel, Stainless
increases lifetime of consumables. Steel, Aluminium and many more.
Item number:
Package W000403595 W000403597
Torches
Duty cycle Cutting thickness (mm)
Designation Flow rate Length (m) Item number PT40-8
@60% Cut Severance
60 l/min
PT 40-8 25A 8 10 4 W000401849
@3.5bar
60 l/min
PT 40-12 25A 12 14 4 W000402337
@3.5 bar
130 l/min PTH-061A-CX-7M5A /
LC65 60A 25 30 7,5 / 15
@5.0 bar PTH-061A-CX-15A PT40-12
130 l/min PTM-061A-CX-7M5A /
LC65M 60A 25 30 7,5 / 15
@5.0 bar PTM-061A-CX-15A
280 l/min PTH-101A-CX-7M5A /
LC105 100A 40 45 7,5 / 15
@5.5 bar PTH-101A-CX-15A
280 l/min PTM-101A-CX-7M5A /
LC105M 100A 40 45 7,5 / 15
@5.5 bar PTM-101A-CX-15MA
LC65/105
LC65M/
WEAR PART BOX 105M
PLASMA-BOX
PT 40-12 PLASMA-BOX
W000402269
LC105
W03X0893-115A
Helmets classification
CE EN 175
Cell classification
AUTODARKENING HELMETS CE EN 379
EUROONE EUROSPEED LS
All processes All processes - Special MMA and MI/MAG
QVariable shade DIN 3.5/9-13. QVariable shade DIN 3.5/9 - 13.
QField of view 98 x 44 mm. QField of view 98 x 44 mm.
QSwitching time QSwitching time clear-dark:
clear-dark: 1/16000 sec. 1/25000 sec.
QPower supply: Solar cells, QPower supply: solar cells
no battery change required + 2 alcaline batteries. WARRANTY
Q2 independent optical
sensors.
WARRANTY
1
Q2 independentoptical sensors.
W000403824
18
MONTH
W000403823
YEAR
2
QVariable shade DIN 3 to 8-13. for all your applications
QField of view 97 x 60 mm. QV ariable shade DIN 4/5-13.
QSwitching time clear-dark: Q4 modes settings per digital key: YEARS
1/20000 sec. - welding shade: DIN 3.5/8-13,
QPower supply: solar cells - grinding,
+ 2 lithium batteries. - cutting or low amperage
Q3 independent optical high welding varaible shade 4 to 8,
sensitivity sensors. - X-mode: this mode allows
welding in outdoor conditions
WARRANTY or with very low arc current (lens turn
2
YEARS
W000403668
when it’s sense the welding current).
GOLDENARK LS
High range LCD helmet that offers Classification
the biggest viewing area in the industry. EN 175
WARRANTY EN 379
FEATURES & BENEFITS
2
EN 166
QExtra wide field of view (dimension: 112 x 78 mm).
QNew comfortable headgear
QYellow cell with optical class 1/1/1/2. YEARS
Q4 optical sensors.
QInfoTrack system providing useful information
(current time - total welding time - alarm - temperature)
with multi language help menu.
QExternal grinding button.
Q4 modes settings per digital key:
- welding shade: 3/8-13,
- grinding,
- cutting or low amperage welding variable shade 5 to 9,
W000403673
- X-mode: this mode allows welding in outdoor conditions
or with very low arc current (lens turn on when
32 it’s sense the welding current).
ldline.eu
www.we
WARRANTY ZEPHYR LS
2
Classification
CE EN 175
CE EN 379 Complete package:
YEARS CE EN 12 941 TH2
ZEPHYR LS - W000403674
FLIP’AIR LS - W000403675
FLIP’AIR LS
2008-243
POWERED RESPIRATOR
CLEANSPACE
2016-442
NEW
CLEANSPACE is a compact and light weight power
unit cushioned around the back of the neck,
counter-balancing the soft silicone low profile mask
and providing fresh clean air, on demand, as you
2016-441
breathe.
This unique method of personal respiratory CLEANSPACE
protection delivers significant benefits to workers Comfort air flow settings 3 levels
in industry. Maximum air flow 200 l/min.
Power Unit 485 g Item number:
Weight
CLEANSPACE Mask 115 g
Respirator unit :
is compatible with: Audible alarm at ear 75 dB(A) (Composition: 1 power unit
QWelding & safety helmets. Motor 10 years + 1 filter P3 + 1 charger W000386837
Life duration
Battery 3 years or 500 cycles + 2 protecting neck (thin & large)
QGoggles, spectacles and face shields.
Automatic switch-off 3 minutes after idle + 1 flow test cap+ 1 storage bag)
QHearing protection.
4.5 hours minimum Silicon mask small W000386838
Internal battery duration
(typically > 6 hours) Silicon mask medium W000386839
Internal battery charging time 2 hours (to 95%) Silicon mask large W000386840
Size EU A B C
Non contractual photo
M
Non contractual photo
EN
EN 12 477A QUALITY
STOPCALOR STOPCALOR +
EN
T GA
Non contractual photo
GEMEN
Split leather and flame retardant treatment Palm in natural grain leather for extra
Lamb skin glove for high level of dexterity fabric with aluminised face.
and flexibility QPalm in split leather flame retardant
2013-117
QComplete hand in natural grain leather. treated and double stitched in cotton.
QCuff in natural cow split leather. 2111 QInside cuff in natural split leather and
QOverall length of the glove: double stitched in cotton. 3 1 43 41344X
100 °C.
9 W000380519 QOverall length of the glove: approximately 355 mm. 10 W000010420
10 W000380520 EN 407
QHandling of component parts not exceeding 100 °C.
GOGGLES / SPECTACLES
FASHION VISIT EN 166 FASHION WELDING EN 175
QImpact resistant. QSpectacles.
QPolycarbonate single lens. QPolycarbonate.
QSports and ergonomic design. QProtection against high-speed
2008-251
2015-023
QWeight: 22 g. particles - low energy.
QProtection against high-speed
W000011062 particles at extreme temperatures..
QResistance to fogging of oculars.
QResistance to surface damage by fine particles.
QWeight: 31 g. W000383505
QElastic headband.
QFolding model,
QIndirect ventilation value.
ideal for supervisors.
QWeight: 137 g.
2010-702
W000011046 W000011115
FLIP UP HELMET
QFlip-up window 105 x 50 mm.
QHeat-resistant material.
LEATHER
Q600 g. PROTECTION
QShade 10 glass included.
FOR NECK
QGrain leather.
QFiaxtion with adhesive band.
QProtection of the neck
W000010804
1198-022
against arc radiation.
2014-563
W000335139
EARPLUG EN 352
QBox of 500 pieces. Magnifying EN 166
QWithout strings.
QSNR 34 DB. colourless glasses
5 pieces box.
FEATURES & BENEFITS Piece of 105 x 50
Diopter Item number The lenses have to be used
QNon-irritating and with tainted filtering glasses.
hypoallergenic foam coating. 1.0D W000335031
They are adapted to 105 x 50 mm
1.5D W000335032
W000010989 passive helmets, and to LCD electronic helmets
2.0D W000335033 (GOLDENARK, CHAMELEON 3, CITOLUXE ADVANCE
2.5D W000335034 and ZEPHYR).
2012-602
2012-603
The productivity in time savings with faster set ups, the convenience of no hassle use,
and the safety advantages of using your hands less and less to handle and position steel
cannot be ignored. From the point you receive steel in, to how you move it through your plant,
to how you fabricate it, there is a MAGSWITCH tool that will improve safety and productivity.
MAGSWITCH is simply a more productive way to do the job.
2012-604
2012-605
Magnetic ground clamp 600 180 155 77 0.8 600 A W000373782
Mini Multi Angle 76 76 32 0.18 N/A W000373783
Mini Multi Angle / 300A ground 95 89 44 0.36 300 A W000373784
Muti Angle 400 Mag-Vise 221 193 81 1.13 N/A W000373785
Multi Angle 1000 Mag-Vise 160 200 125 4.25 N/A W000373786
Mag Square 150 169 96 53 0.3 N/A W000373787
Mag Square 600 215 190 80 1.5 N/A W000373788
Pivot Angle 200 250 180 65 1.72 N/A W000373789
2012-606
2012-608
Hand Lifter 60 CE, Cordless electric 254 178 102 1.45 N/A W000373791
CLAMPS
FOR NORMAL USE FOR BULKY PARTS
S
2009-296
CROCODILE 300/600
/600 ROTARY 800
Q300 A at 35% (CROCODILE 300). Q800 A at 35%.
2007-756
2004-640
2007-110
Dimension Shape Use Specification Unit / box Item number
125 x 1 x 22 mm flat steel/stainless steel 61A 60 S7 BF 50 W000261931
125 x 1.6 x 22 mm flat steel/stainless steel 61A 60 S7 BF 50 W000335002
125 x 1 x 22 mm flat alu AC 46 S7 BF 50 W000401338 NEW
2007-111
230 x 2 x 22 mm flat steel A 36 S7 BF 25 W000261935
230 x 2.5 x 22 mm flat steel A 36 S7 BF 25 W000261937
230 x 3.2 x 22 mm flat steel A 36 S7 BF 25 W000261940
When buying such products, always ask
125 x 3 x 22 mm depressed alu AC 36 S7 BF 25 W000401348 NEW for OSA certification. The guarantee that the
125 x 3.2 x 22 mm depressed steel A 36 S7 BF 25 W000335006 product complies with the safety standard
230 x 2.5 x 22 mm depressed steel A 36 S7 BF 25 W000261944 and the additional requirements of the
230 x 3.2 x 22 mm depressed steel A 36 S7 BF 25 W000335004 Organisation for the Safety of Abrasives.
DUCTIFLEX
2007-108
A grinding range for standard structural steel
Dimension Shape Use Specification Unit / box Item number
125 x 6 x 22 mm depressed standard steel A 30 S7 BF 10 W000261946
230 x 6 x 22 mm depressed standard steel A 30 S7 BF 10 W000261948
DUCTIFLAP
Abrasive flap disks
Shape
Dimension Grit Unit / box
2009-010
15 % conical for fiberglass backing Flat for nylon backing
125 x 22 mm 40 10 W000264535 W000273754
125 x 22 mm 60 10 W000264534 W000273756
125 x 22 mm 80 10 W000335008 W000273755
to incandescent particles.
This rubber cable is isolated
by neopren and in conformity with
Ø Item number
2000-174
2008-386
Pickling of stainless steels after welding.
of welding torches.
W000266426
QHigh electrical resistivity.
QEnsures an anti-freezing protection
down to -27 °C.
QAnti-corrosion and RESTORINOX G
9.6 liters
anti-algae growth.
ret
2004-216_ret
W000010167
its stainless characteristics back.
2008-389
W000266430
Welding Chalk
QThe soapstone welding crayon is resistant to heat up to Item number
2000° C (3630° F). W000383116
GEMEN
GA T
QWill not contaminate welds.
EN
QUALITY
EN
Paintstik QUIK STIK
T GA
GEMEN
Color Item number
White W000383113
QQuik Stik is a smooth-marking solid paint crayon that
Yellow W000383114
dries quickly to leave a bold, permanent mark on most
surfaces. Red W000383115
2015-107
2015-102
2015-098
MOBILE SCREENS
PREMIUM UNIVERSAL
Robust and portable screen. The UNIVERSAL screen with strips is a very stable screen,
0823-18
The curtain is tight and offered with castors. Frame height 2 100 mm
stable when in position. QScreen frame in square tube Screen width L 4 300 mm =
QGalvanized pipes frame 50 x 32 x 2 mm and round 1 100 + 2 100 + 1 100 mm
1 frame on castors
(diam. 25 x 1 mm). tubes 35 x 2.5 mm. Designation
+ 2 rotating extensions L 1.10 m
QScreen 1 700 mm x 1 700 mm. QWith it’s large diameter castors + 1 accessories kit
(Ø 75 mm) and it’s rugged + 5 kits of 4 strips
frame it will be a long lasting Height 1 800 mm
investment. Orange CE W000010292
Classification
Green T9 W000010291
EN 1598
V
ANTI IR/U N
T IO
PROTEC Classification
SELF EN 1598
HABLE
EXTINGUIS
Designation Complete screen
Orange CE W000371474
0823-23
OPTILAM (straps)
The OPTILAM screen is a special screen with 300 mm x 2 mm strips
across the frame. Its frame has a special design to enable easy portability
whilst giving a very good stability when in position. The design
of the feet allows the screens to be placed at 90° of each other.
QWidth 1 860 mm, height 1 930 mm.
QPainted frame.
Classification
QEquipped with 7 strips of 1 750 mm height in accordance
EN 1598
with EN 1598 standard.
VULCAIN BLANKET
Curtains and heat resistant fabrics. Glass fiber 2 sided polyurethane.
QTemperature - Peak: 600 °C / QThickness: 0.7 mm.
Continuous: 550 °C. QWeight: 710 g/m2.
QHorizontal and vertical light welding, M0 CERTIFIED
cutting and grinding applications.
Fire proof
2009-263_ret
e standard
Conform to th RS
and to the IN
EN 60974-7 5 rule s
2015-180
2015-192
of 01/07/201
AIR WATER
WST2 - 2R WST2 - 3R WST2 - 4R WST2 - 3W WST2 - 4W WST2 - 5W
Contact tube M6 M8 x 30 M8 x 30 M8 x 30 M8 x 30 M8 x 30
Ø nozzle 12 mm 15 mm 15 mm 15 mm 15 mm 19 mm
Welding intensity @ 100% CO2 250 A 300 A 400 A 300 A 360 A 450 A
duty cycle Ar / CO2 225 A 270 A 320 A 260 A 320 A 410 A
Weight (g) according standard 1180 1365 1465 1570 1565 1565
Minimal efficiency performances
Flowrate m3/h 73 94 94 94 90 94
For speed 0.25 m/s
Suction Pa 8 400 10 600 10 600 12 500 11 000 12 500
Flowrate m3/h 87 113 113 113 108 113
For speed 0.3 m/s
Suction Pa 13 100 16 300 16 300 16 500 16 300 16 500
AIR WATER
WATE
TEER
TER
DUALFLOW is a device allowing the modulation of the fumes extraction
Designation Item number Designation Item number flowrate by the welder. By a simple pulse on a microswitch on the handle
3M W000381887 3M W000381901 of the torch, and during welding the welder can decide to change the suction
WST2 - 2R WST2 - 3W power. This reduced flowrate will apply for welding zone in confined area
4M W000381888 4M W000381902 providing in all situations high quality welds and preserving the welder
250 A @ 100% 300 A @ 100%
5M W000381889 5M W000381903 from the fumes. DUALFLOW is patented by Oerlikon.
3M W000381890 3M W000381904
WST2 - 3R WST2 - 4W
4M W000381891 4M W000381905
300 A @ 100% 360 A @ 100% AIR WATER
5M W000381897 5M W000381906
Designation Item number Designation Item number
3M W000381898 3M W000381907
WST2 - 4R WST2 5W * 3M W000384970 3M W000384977
4M W000381899 4M W000381908 WST2 - 2R WST2 - 3W
400 A @ 100% 450 A @ 100% 4M W000384971 4M W000384978
5M W000381900 5M W000381909 250 A @ 100% 300 A @ 100%
5M W000384972 5M W000384979
LN: Long Nozzle - Torch with extended nozzle: WST2 5W LN * 3M Nous consulter 3M W000384973 3M W000384980
+5 cm at the horizontal part of the torch. Ideal 450 A @ 100% 4M Nous consulter WST2 - 3R WST2 - 4W
for easier access to difficult joints and for very 4M W000384974 4M W000384981
(Buse rallongée) 5M Nous consulter 300 A @ 100% 360 A @ 100%
high duty cycle welding (the welder’s hand is 5M W000384975 5M W000384982
not close of the welding bead).
3M W000384976 3M W000384983
WST2 - 4R WST2 - 5W *
4M W000384986 4M W000384984
OPTION 400 A @ 100% 450 A @ 100%
5M W000384987 5M W000384985
40 Transformation kit of a standard torch to a DUALFLOW version W000385157 * Double cooling circuit: Oerlikon patent.
COLLECTION UNITS FOR USE WITH FUME EXTRACTION TORCHES
ESSENTIAL TE35 MODULO MD 2
Features: Features:
QFlow from 80 to 135 m3/h QUsable with 1 or 2 torches WST2.
depending on the torch. QMetal pre-filter.
QMetal pre-filter. QArc detection sensor for an automatic
QArc detection sensor for an automatic commissioning and a 5 m supply cable.
commissioning and a 5 m supply cable. QMobil turbine with 2 wheels.
QMounting of this unit is done vertically QComplement option:
or horizontally. 2012-466 - Filtration cartridge with 5 m2 fi ltration surface,
rfacce,
QMaximum flow 310 m3/h. - Filter and pressure regulator.
QMaximum vacuum 30 000 Pa. QCleaning by compress air, manually actived..
QMotor 3Ph - 3 kW. QMaximum fl ow 310 m3/h.
QWeight 51 kg. QMaximum vacuum 30 000 Pa.
This unit outlet should be connected outside QMotor 3Ph - 3 kW.
the room or to a centralised network through the Ø 80 mm. QWeight 65 kg. MODULO MD 2 Standard - W000401385
This unit outlet should MODULO MD 2 DUALFLOW - W000401389
ESSENTIAL TE 35 Standard - W000278334 be connected outside
ESSENTIAL TE 35 DUALFLOW - W000379431 the room or to a centralised network through the Ø 80 mm.
DUALFLOW turbines
Associated to fume extraction torches microswitch WST2, the DUALFLOW 2 functioning modes :
fume extraction turbines allow to obtain a nominal fume extraction flow during - 2T mode : lower fume extraction flow as the microswitch is triggered
the entire welding time, and, by an information transmitted by the torch, give - 4T mode : an impulsion on the microswith lowers the fume extraction flow, a
a lower fume extraction flow for welding in a confined space. new impulsion gives the maximum flow back.
FUME EXTRACTION
MOBILFILTER 1600M MOBILFILTER
R 50M
Features: Features:
QCollection fl ow on the arm: 1 600 m /h.
3
QCollection flow on the arm: 1 6000 m3/h.
QMechanical cassette filter. QFan flow: 2 400 m3/h.
QFiltration surface 35 m2 Ei >99.9%. QFiltration is provided by a 50 m2
QEN 60335-2-69 CLASSE M. surface cellulose cartridge.
QMotor 1.5 kW. QA choking indicator signals when
QRear vertical outlet. the cartridge must be replaced.
QAutomatic start/stop with arc detection QPICKFUME and EASY
by magnetic sensor included. PICKFUME arms.
QAir flow at the nozzle:
It gets, as a complement, an external
release set for a Ø 160 mm hose. 1 200 m3/h.
EUROPE/AFRICA/ME
13 Countries
NORTH AMERICA 26 Facilities
3 Countries 14 Solution Centers
22 Facilities ASIA PACIFIC
16 Solution 4 Countries
9 Facilities
5 Solution
SOUTH AMERICA
3 Countries
6 Facilities
7 Solution
Global Headquarters
Cleveland, Ohio USA
www.lincolnelectriceurope.com