Professional Documents
Culture Documents
Comunicacion Etherntet Unity
Comunicacion Etherntet Unity
Configure the Ethernet network according to your application. Don't forget to Validate your changes.
Next Link the Network to the correct Ethernet port in the configuration
Next go to Tools and Project Settings
In the Project Settings that the last 3 items in the Data types field are checked off.
This will allow us to directly enter Arrays into our project rather than having to first declare them as variables.
Next add a ADDM block to your program, link the OUT pin to the ADR pin of the Read_Var block, and enter the appropriate String
(according to your Network configuration) to the IN pin
Note: The Syntax of the IN parameter of the ADDM block for Ethernet is explained in additional FAQs.
For this Example the Net Link id "Ethernet_1" and the IP address of the TCP/IP device is 192.168.40.11.
Remember that this input is a String so you need ' before and after the text.
Next configure the remaining parameters of the Read_Var block where:
Legacy KB System (APS) Data: RESL187363 V2.0, Originally authored by MiMe on 08/02/2007, Last Edited by MiMe on 07/19/2008
Related ranges: Modicon M340