This document describes a method to achieve a target thrust at a nozzle exit by adjusting the total temperature (Ttot) of the flow. It defines a function that takes in the target thrust, relaxation parameter, minimum and maximum Ttot, and zone ID. The function computes the present thrust and determines a delta Ttot needed to reach the target. It then returns an adjusted Ttot value between the minimum and maximum limits. The adjusted Ttot is then applied to the flow profile to achieve the desired thrust.
This document describes a method to achieve a target thrust at a nozzle exit by adjusting the total temperature (Ttot) of the flow. It defines a function that takes in the target thrust, relaxation parameter, minimum and maximum Ttot, and zone ID. The function computes the present thrust and determines a delta Ttot needed to reach the target. It then returns an adjusted Ttot value between the minimum and maximum limits. The adjusted Ttot is then applied to the flow profile to achieve the desired thrust.
This document describes a method to achieve a target thrust at a nozzle exit by adjusting the total temperature (Ttot) of the flow. It defines a function that takes in the target thrust, relaxation parameter, minimum and maximum Ttot, and zone ID. The function computes the present thrust and determines a delta Ttot needed to reach the target. It then returns an adjusted Ttot value between the minimum and maximum limits. The adjusted Ttot is then applied to the flow profile to achieve the desired thrust.
This document describes a method to achieve a target thrust at a nozzle exit by adjusting the total temperature (Ttot) of the flow. It defines a function that takes in the target thrust, relaxation parameter, minimum and maximum Ttot, and zone ID. The function computes the present thrust and determines a delta Ttot needed to reach the target. It then returns an adjusted Ttot value between the minimum and maximum limits. The adjusted Ttot is then applied to the flow profile to achieve the desired thrust.