SERVICE BULLETIN
, no, _1707
MopeL:'_PRO MAC 800
suByect: STOCKING AND PRICING INFORMATION
pate; DECEMBER 1, 1980
Pro Mac 800 series chain saws now being manufactured are identified by
model number 600072, and serial number prefix 11-.
: The Illustrated Parts List for this model is P/N 213799.
The Pro Mac 800 is an improved version of the Pro Mac 850 model. The
Pro Mac 800 has increased horsepower and cutting-speed. Along with
these improvements, the Pro Mac 800 incorporates a new-exhaust "Q"
port: This new exhaust port lowers the compression at starting speeds
(RPM's), thus eliminating the necessity of aD.S.P. valve. The "Q"
Port also’ smoothes .out the idle and aids in reducing engine exhaust
noise. * 5
In addition, the Pro Mac 800 series chain saw includes these features:
A large volume, low tone muffler that reduces noise without any
power loss.
A spark arrester screen that is standard equipment, and meets all
U.S. Forest Service requirements for exhaust spark emissions and
skin temperatures. :
A flywheel with longer fins for improved cooling efficiency.
A third port boot that improves idling in all cutting positions.
When you receive your copy o.
corrections: q
his I.P.L., please note the following
FIGURE ITEM NUMBER —DESCRIPTI
cGy 20)
6 50
Attached to this Service Bulletin is information concerning new parts
used exclusively on the Pro Mac 800 series chain saws. This information
includes the Manufacturer's Suggested List Price and the’ Suggested
Stocking List. These suggested stocking quantities are based on
stocking 25 units. :
95269 Wire Assembly
92818 Seal - Pulse pump