Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Test methods

ASTM International
Sr No Standard Test Details
1 ASTM C 39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

2 ASTM C 40 Standard Test Method for Organic Impurities in File Aggregates for Concrete

3 ASTM C 78 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

4 ASTM C 88 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

5 ASTM C 109 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

6 ASTM C 117 Standard Test Method for Materials Finer than 75um (No. 200) Sieve in Mineral Aggregates by Washing

7 ASTM C 123 Standard Test Method for Lightweight Particles in Aggregate

8 ASTM C 127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

9 ASTM C 128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

10 ASTM C 131 Test Method for Resistance to Degradation of Small-Sized Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

11 ASTM C 136 Sieve Analysis of Fine and Coarse Aggregates.

12 ASTM C 142 Standard Test Method for Clay Lumps and Friable Particles in Aggregates

13 ASTM C 173/C Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
173M
14 ASTM C 1019 Standard Test Method for Sampling and Testing Grout

15 ASTM D 422 Standard Test Method for Particle-Size Analysis of Soils

16 ASTM D 698 Determination of the dry density/moisture content relation of a soil using standard comp active effort.

17 ASTM D 854 Specific Gravity of Soils

18 ASTM D 1188 Bulk Specific Gravity of Compacted Bituminous Mixtures using Paraffin Coated Specimens

19 ASTM D 1557 Determination of the dry density/moisture content relation of a soil using modified comp active effort.

20 ASTM D 1559 Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus

By: Abdul Samad Email : samadmsin@yahoo.co.in


Test methods
ASTM International
Sr No Standard Test Details
21 ASTM D 1560 Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus

22 ASTM D 2041 Determination of specific gravity and maximum density of asphalt - Water displacement method.

23 ASTM D 2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

24 ASTM D 2172 Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

25 ASTM D 2216 Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

26 ASTM D 2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

27 ASTM D 2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

28 ASTM D 2488 Description and Identification of Soils (Visual-Manual Procedure)

29 ASTM D 2726 Bulk Specific Gravity and Density of Non Absorptive Compacted Bituminous Mixtures

30 ASTM D 2844 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils

31 ASTM D 2922 Standard Test Method for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)

32 ASTM D 3203 Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures

33 ASTM D 4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

34 ASTM D 4546 Standard Test Methods for One-Dimensional Swell or Settlement Potential of Cohesive Soils

35 ASTM D 4791 Standard Test Method for Flat Particles, Elongated Particles or Flat and Elongated Particles in Coarse Aggregate

36 ASTM D 4867 Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage

37 ASTM D 5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

38 ASTM D 6307 Asphalt Content of Hot-Mix Asphalt by Ignition Method

39 ASTM D 6752 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

40 ASTM PS 131 Bulk Specific Gravity of Compacted Bituminous Mixtures using Paraffin Coated Specimens

By: Abdul Samad Email : samadmsin@yahoo.co.in

You might also like