Professional Documents
Culture Documents
KHAADI SHOP - LINKROAD MODEL TOWN LAHORE - BOQ - ID PLUMBING WORKS - 15-12-2017
KHAADI SHOP - LINKROAD MODEL TOWN LAHORE - BOQ - ID PLUMBING WORKS - 15-12-2017
For Renovation
Principal Design
Interior, Furnishing & Plumbing Works Consultant
BOQ (15-12-2017)
Talha MD
Suit - 106, First Floor, Clifton Broadway, Project &
Main Clifton Road, Clifton, Karachi - 75600. Construction
Tel: 92-21-35372853 & 58 Management
Fax: 92-21-35372858
Summary of Cost Khaadi
Link Road - Model Town
( Renovation, Interior & Furnishing Works ) Lahore
Amount in Words:
1.4 Tile finished floor with-out base concrete. Per Sqft Sft.
1.5 Raised floor along all top finishes and base structure. ( All types ) Sft.
1.8 Wooden claddings / boxing / bulkheads along all finishes / paneling. Sft.
1.10 False ceiling along all finishes / frames. ( All types ) Sft.
1.15 Fixed glazing & windows along frames, posts, etc. Sft.
Talha
B O QPage 4 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Note:
1)- Slab to be cut with mechanical cutter before hammering down the slab.
2)- Beams and slabs should be properly propped prior to dismantling works.
Providing, fabricating and fixing of stair railing fabricated with paint finish 1" dia 18swg
post, 2" dia 18swg MS pipe handrail welded with post and fixed with stair structure
including approved three coats of enamel paint over two coats of anti rust paint,
ID-720, 721. Rft.
welding, grinding, all fixing accessories and arrangements, scaffolding, wastage, etc.
Complete in all respect and as per drawings, details and directions of the Architect /
Engineer.
Providing, fabricating and installation of metal structure for 1st floor stock room
comprising of different sections, plates, etc. in required sizes and thickness / gauges
(as mentioned in drawings) including wastage, cutting, continuous welding, grinding,
Kg.
anchoring, three coats of approved enamel paint over two coats of anti rust paint on all
MS structure, all fixing accessories and arrangements, scaffolding, etc. Complete in all
respect and as per drawing, details and directions of the Architect / Engineer.
Talha
B O QPage 5 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, fabricating and installation of metal roof GI corrugated sheet of 20swg over
already made metal structure (Refer item # 2.3) for 1st floor stock room (as mentioned
in drawings) including wastage, minimum 6" overlapping of sheets, cutting, welding,
Sft.
grinding, anchoring with metal structure, all fixing accessories and arrangements,
scaffolding, etc. Complete in all respect and as per drawing, details and directions of
the Architect / Engineer.
Providing and laying of brick masonry wall 4.5" ~ 9" thick up to any height, level and
floor using first class burn brick with cement sand jointing mortar ratio 1:5 including
leveling, alignment, scaffolding, tie with existing wall using 1/4" dia steel pins at 2 feet DD-103, 104. Cft.
interval height, curing, wastage, all arrangements, etc. Complete in all respect and as
per drawing, details and directions of the Architect / Engineer.
Providing, mixing and applying of anti-termite treatment under floor using the specified
insecticides emulsion "Biflex" or approved equivalent applied as per manufacturer's
Sft.
specifications. Complete in all respects and as directed by the Engineer. (Covered
area of building to be measure for this item)
Talha
B O QPage 6 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and laying cast in place cement concrete steel trowel finish floor Avg. 2.5"
thick ratio 1:2:4 laid in panels using approved quality (cement, course sand, crush) ID-401 to
4.1.1 Sft.
including compacting, leveling, curing, wastage, all arrangements, etc. Complete in all 403.
respect and as per drawing, details and directions of the Architect / Engineer.
Providing and laying cast in place cement concrete rough floor Avg. 2.25" thick ratio
1:2:4 laid in panels using approved quality (cement, sand, crush) including ID-401 to
4.1.2 Sft.
compacting, leveling, curing, wastage, all arrangements, etc. Complete in all respect 403.
and as per drawing, details and directions of the Architect / Engineer.
Providing and laying cast in place cement concrete rough floor Avg. 1.25" thick ratio
1:2:4 laid in panels using approved quality (cement, sand, crush) including ID-401 to
4.1.3 Sft.
compacting, leveling, curing, wastage, all arrangements, etc. Complete in all respect 403.
and as per drawing, details and directions of the Architect / Engineer.
Providing and fixing of wooden raised floor structure 3.5" high fabricated with 3/4" thick
marineplex ply over 2" thick partal wood for frames @ 16" c/c including epoxy joint
filling, solignum treatment, wastage, all fixing accessories and arrangements, etc. ID-401, 403. Sft.
Complete in all respect and as per drawings, details and directions of the Architect /
Engineer.
Providing and fixing of wooden raised floor structure 7" high fabricated with 3/4" thick
marineplex ply over 2" thick partal wood for frames @ 16" c/c including epoxy with fine
sand over ply, rubbing of ply to application of epoxy, epoxy jointing, solignum ID-401, 403. Sft.
treatment, wastage, all fixing accessories and arrangements, etc. Complete in all
respect and as per drawings, details and directions of the Architect / Engineer.
Talha
B O QPage 7 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and fixing of full body porcelain tiles on already laid CC rough concrete floor
(tiles to be fixed with approved dry bond) including dry bond, approved unsanded
grout, spacers in required size, cutting, curing, cleaning, hacking / chipping of existing ID-401 to
surface for bonding where necessary, wastage, all fixing accessories and 403.
arrangements, etc. Complete in all respects and as per drawing, patterns and
directions of the Architect / Engineer.
4.3.1 CT-1. (Size 24" x 48" = Basic price of tile - Rs. 2,700/- per sq.meter @ Karachi) Sft.
4.3.2 CT-2. (Size 12" x 12" = Basic price of tile - Rs. 1,150/- per sq.meter @ Karachi) Sft.
4.3.3 CT-3. (Size 12" x 24" = Basic price of tile - Rs. 2,000/- per sq.meter @ Karachi) Sft.
Providing and fixing of approved silbatta stone tile (Blade cut) size 12" x 48" x 1.5"
thick on floor over already laid rough concrete floor (tiles to be fixed with approved dry
ID-401 to
bond) including dry bond, approved grout, sealer, spacers if required, cutting, curing, Sft.
403.
cleaning, wastage, all fixing accessories and arrangements, etc. Complete in all
respects and as per drawing, patterns and directions of the Architect / Engineer.
4.5 Carpet Tile. ( CT-5 ) [ 20" x 20" - Cubic Black - Pak Carpet ]
Providing and fixing of approved carpet tile in fitting rooms paste over already laid CC
finished floor (level to be match with outer finished floor) including pasting adhesive,
ID-401. Sft.
cutting, wastage, etc. Complete in all respects and as per drawing, patterns and
directions of the Architect / Engineer.
Pre - Polished Marble Tile Floor. ( CT-6 ) [ Basic price with polish - Rs. 350/- per sft. @
4.6
Karachi ]
Providing and fixing of approved white marble pre-polished tile size 12" x 24" x 3/4"
thick on floor over already made wooden raised floor structure (tiles to be fixed with
ID-401 to
approved dry bond) including dry bond, approved grout, sealer, cutting, curing, Sft.
403.
cleaning, wastage, all fixing accessories and arrangements, etc. Complete in all
respects and as per drawing, patterns and directions of the Architect / Engineer.
Talha
B O QPage 8 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, making and fixing of 1" thick solid red meranti wood over already made
wooden raised floor structure (Top & Riser) including approved polish with lacquer over
transparent sealer, hardener, wastage, all fixing accessories and arrangements, etc. ID-401, 403. Sft.
Complete in all respects and as per drawing, details and directions of the Architect /
Engineer.
Providing, making and fixing of 4' long x 6" wide x 3/4" thick solid white ash wood
panels as floor over 3/4" thick marine ply fixed on to already laid CC floor including
approved polish with lacquer over transparent sealer, wastage, scaffolding, all fixing Sft.
accessories and arrangements, etc. Complete in all respects and as per drawing,
details and directions of the Architect / Engineer.
Providing, making and fixing of 4' long x 6" wide x 3/4" thick solid red meranti wood
panels as floor over 3/4" thick marine ply fixed on to already laid CC floor including
approved polish with lacquer over transparent sealer, wastage, scaffolding, all fixing Sft.
accessories and arrangements, etc. Complete in all respects and as per drawing,
details and directions of the Architect / Engineer.
Talha
B O QPage 9 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, fabricating and fixing of 4" thick full / low height stud partitions up to any
height and floor comprising with 3/4" thick laminated chip boards (both side) over 2" x
2.5" partal wood frame at 24" x 24" center to center including solid rough wood at all
corners, epoxy joint filling, making smooth surface, solignum treatment over wood,
ID-101, 102. Sft.
scaffolding, all fixing accessories and arrangements, fixing of frame with structural slab
/ beam up to any height, wastage, etc. Complete in all respect and as per drawings,
details and directions of the Architect / Engineer. (This job will be coordinated with
electrical and air-conditioning works)
Providing, fabricating and fixing of wooden cladding over walls, beams, columns &
boxing up to any height, floor and depth comprising with 3/4" thick single side
laminated chip board over 2" x 2" partal wood frame at 24" x 24" center to center
including solid rough wood at all corners, epoxy joint filling, making smooth surface,
solignum treatment over wood, scaffolding, wastage, all fixing accessories and ID-101, 102. Sft.
arrangements, fixing of frame with walls, structural slab / beam up to any height &
depth, fixing arrangement for fixed glazing, etc. Complete in all respect and as per
drawings, details and directions of the Architect / Engineer. (This job will be
coordinated with electrical and air-conditioning works)
Providing and fixing of 12mm thick approved wood cement board (VIVA Thailand OR
Approved equivalent) water resistant over already installed metal structure (Vertically)
1st Floor
including sheet joint treatment by VIVA, making smooth surface, scaffolding, all fixing
stock room Sft.
accessories and arrangements, hardware, wastage, etc. Complete in all respect and
out side.
as per drawings, details, manufacturer's specification / instructions and directions of
the Architect / Engineer.
Providing and fixing of 1/8" thick & 3" wide polish finish Malaysian ply with back of 1/2"
thick plain MDF board fixed with partal wood frame over already made dry partitions /
cladding including red meranti wood lipping all around, making grooves, approved
ID-706. Sft.
polish with lacquer over transparent sealer, wastage, all fixing accessories and
arrangements, etc. Complete in all respect and as per drawings, details and directions
of the Architect / Engineer.
Talha
B O QPage 10 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and fixing of wooden trim fabricated with solid polish finish red meranti wood
including making grooves, approved polish with lacquer over transparent sealer, all
fixing accessories and arrangements, wastage, scaffolding, etc. Complete in all
respect and as per drawings, details and directions of the Architect / Engineer.
5.5.2 1/2" x 4" with back of partal wood. ( Fitting room - Top ) ID-706. Rft.
5.5.3 1/2" x 3" with back of partal wood. ( Fitting room - Sides ) ID-706. Rft.
Providing and fixing of wooden trim fabricated with solid polish finish white ash wood
size 1/2" x 2" including making grooves, approved polish with lacquer over transparent
Rft.
sealer, all fixing accessories and arrangements, wastage, scaffolding, etc. Complete in
all respect and as per drawings, details and directions of the Architect / Engineer.
Providing and fixing of wooden skirting fabricated with solid polish finish wood
including making grooves, approved polish with lacquer over transparent sealer, all
fixing accessories and arrangements, wastage, etc. Complete in all respect and as per
drawings, details & directions of the Architect / Engineer.
5.8 Porcelain Tiles Over Toilet & Pantry Walls. ( Basic price of tile - Rs. 2,000/- per sq.meter @ Karachi )
Providing and fixing of full body porcelain tiles over toilet walls including making
grooves, spacer if required, dry bond / adhesive for fixing of tiles, unsanded grout,
ID-707. Sft.
cutting, curing, cleaning, hacking / chipping if required, wastage, etc. Complete in all
respects and as per drawing, patterns and directions of the Architect / Engineer.
Talha
B O QPage 11 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and fixing of 2" high skirting of cut porcelain tile including cutting, fixing
adhesive, filling of joint, all fixing accessories and arrangements, wastage, etc.
Complete in all respect and as per drawings, details & directions of the Architect /
Engineer.
5.9.1 2" High. ( Basic price of tile - Rs. 2,700/- per sq.meter @ Karachi ) Rft.
ID-401, 402.
5.9.2 2" High. ( Basic price of tile - Rs. 1,150/- per sq.meter @ Karachi ) Rft.
Providing and fixing of approved fair face brick tiles (Gutka) over already laid rough
plaster up to any height & floor including fixing mortar, steel pins for supporting of
gutka if required, wastage, scaffolding, approved grouting in joints if required, all fixing ID-401, 502. Sft.
accessories and arrangements, etc. Complete in all respect and as per drawings,
details & directions of the Architect / Engineer.
Providing, making & fixing of main entrance door shutter size 5'-6" x 7'-8" (In two
panels) using solid red meranti wood polish finish, 12mm thick clear tempered glass
with 3M safety film of 170 micron including approved polish with lacquer over
ID-701. Job.
transparent sealer, safety film, floor mounted door closer, hinges, lock, wastage,
making smooth surface, all fixing accessories and arrangements, etc. Complete in all
respects and as per drawing, details & directions of the Architect / Engineer.
Talha
B O QPage 12 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, fabricating and installation of comb cut finish door shutter size 2'-3" x 6'-4"
using 3/4" thick marine ply, 3/4" x 3/4" partal wood all around of ply, 3/8" thick red
meranti veneer comb cut finish on both sides, 1/2" thick solid red meranti wood lipping ID-702, 703.
all around including approved hardware (lock, hinges, latch, door stopper, etc.), (Fitting Jobs.
solignum treatment, approved polish with lacquer over transparent sealer, all fixing Room)
accessories and arrangements, wastage, etc. Complete in all respects and as per
drawing, design, details and directions of the Architect / Engineer.
Providing, fabricating and installation of comb cut & formica finish door shutter size 3'-
0" x 7'-10.5" using 3/4" thick marine ply, 3/4" x 3/4" partal wood all around of ply, 3/8"
thick white ash veneer comb cut finish on retail side, 3/8" thick plain MDF with formica
finish on stair lobby side, 1/2" thick solid white ash wood lipping all around including ID-702, 703.
Job.
approved hardware (lock, hinges, latch, door stopper, etc.), solignum treatment, (Stair Lobby)
approved polish with lacquer over transparent sealer, all fixing accessories and
arrangements, wastage, etc. Complete in all respects and as per drawing, design,
details and directions of the Architect / Engineer.
Providing, fabricating and installation of formica finish door shutter using 3/4" thick
marine ply, 3/4" x 3/4" partal wood all around of ply, 3/8" thick plain MDF with formica
finish on both sides, 1/2" thick solid white ash wood lipping all around including
approved hardware (lock, hinges, latch, door stopper, etc.), solignum treatment, ID-702, 703.
approved polish with lacquer over transparent sealer, all fixing accessories and
arrangements, wastage, etc. Complete in all respects and as per drawing, design,
details and directions of the Architect / Engineer.
Providing, fabricating and installation of DB shutter fabricated with solid red meranti
polish finish wood including frame, approved hardware (hinges, latch, stopper),
approved polish with lacquer over transparent sealer, all fixing accessories and ID-704. Sft.
arrangements, etc. Complete in all respects and as per drawing, design, details and
directions of the Architect / Engineer.
Talha
B O QPage 13 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, fabricating and fixing of door frame made with 2" x 4" solid white ash wood
back with 1/4" thick commercial ply shim including sealant, solignum treatment,
6.2.1 approved polish with lacquer over transparent sealer, all fixing accessories and ID-702, 703. Rft.
arrangements, etc. Complete in all respects and as per drawing, details and directions
of the Architect / Engineer.
Providing, fabricating and fixing of door frame (Sides) size 2" x 4.5" made with solid
red meranti wood with 1/4" thick commercial ply shim including sealant, solignum
6.2.2 treatment, approved polish with lacquer over transparent sealer, wastage, all fixing ID-706. Rft.
accessories and arrangements, etc. Complete in all respects and as per drawing,
details and directions of the Architect / Engineer.
Providing, fabricating and fixing of door (top) panel size 1-1/2" x 4.5" made with 1/8"
thick teak MDF over 1/2" thick MDF board, 1-1/2" x 1/2" solid red meranti wood edges
6.2.3 including approved polish with lacquer over transparent sealer, all fixing accessories ID-706. Rft.
and arrangements, wastage, etc. Complete in all respects and as per drawing, details
and directions of the Architect / Engineer.
Providing, fabricating and fixing of fixed glass frame made with 4" x 12" solid red
meranti wood including sealant, approved polish with lacquer over transparent sealer,
6.2.4 ID-701. Rft.
all fixing accessories and arrangements, etc. Complete in all respects and as per
drawing, details and directions of the Architect / Engineer.
Providing and fixing of 12mm thick tempered glass with 3M safety film of 170 micron to
be fixed in already installed wooden frame (Refer item # 6.2.4) including safety film,
butt joint, water proof sealant, wastage, scaffolding, all fixing accessories and ID-701. Sft.
arrangements, etc. Complete in all respects and as per drawing, details and directions
of the Architect / Engineer.
Talha
B O QPage 14 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and installation of wooden ceiling fabricated with 3/4" thick laminated chip
board with concealed framing of 2" x 2" partal wood at 24" x 24" center to center hang
from RCC slab / beams at any height including solid rough wood at all corners, epoxy
ID-301 to
jointing, solignum treatment, making smooth surface, cutting for light fixtures, all fixing Sft.
303.
accessories and arrangements, scaffolding, wastages, etc. Complete in all respects
and as per drawing, design and directions of the Architect / Engineer. (This job will be
coordinated with electrical and air-conditioning works)
Providing and installation of fabric ceiling in waves shape using approved grey PVC
fabric ( 650 gram per sq.meter of Obekan supplied by Innovators ) with framing of
paint finish 1.5" dia 18swg MS pipe @ 48" x 48" c/c rested on already installed wooden
ID-301 to
beam size 6" x 10" at any height including welding, grinding, painting on complete MS Sft.
303.
structure, all fixing accessories and arrangements, scaffolding, wastages, etc.
Complete in all respects and as per drawing, design and directions of the Architect /
Engineer.
Providing, fabricating and installation of wooden support for LED smart panel size 2" x
2" made from red meranti wood rest / fixed over partition walls including MS paint
finish angle support, approved polish with lacquer over transparent sealer, scaffolding, ID-706. Rft.
all fixing accessories and arrangements, wastages, etc. Complete in all respect and as
per drawings, details & directions of the Architect / Engineer.
Providing, making and installation of polish finish wooden beams (for track light)
fabricated with solid polish finish red meranti wood size 4" x 2" including making
grooves for track light, approved polish with lacquer over transparent sealer, hang with
8mm dia threaded shaft on to slab, 3" x 1" x 3mm thick MS plate weld with shaft and ID-301 to
Rft.
fixed with wooden beam, anchoring, all fixing accessories and arrangements, 303.
scaffolding, wastages, etc. Complete in all respects and as per drawing, design and
directions of the Architect / Engineer. (This job will be coordinated with electrical works)
Talha
B O QPage 15 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, making and installation of polish finish wooden beams fabricated with solid
polish finish red meranti wood size 4" x 6" including approved polish with lacquer over
transparent sealer, hang with 12mm dia threaded shaft on to slab, 6" x 2" x 3mm thick
ID-301. Rft.
MS plate weld with shaft and fixed with wooden beam, anchoring, all fixing accessories
and arrangements, scaffolding, wastages, etc. Complete in all respects and as per
drawing, design and directions of the Architect / Engineer.
Providing, fabricating and installation of wooden rafters made from red meranti wood
size 2" x 3" fixed on to already installed wooden beam (Refer item # 7.5) including
approved polish with lacquer over transparent sealer, scaffolding, fixing arrangement ID-301, 303.
Rft.
for LED smart panel, all fixing accessories and arrangements, wastages, etc. (Detail - 2)
Complete in all respect and as per drawings, details & directions of the Architect /
Engineer.
Providing and installation of polish finish wooden beam using 3mm thick Malaysian ply
fixed over 16mm thick laminated chip board with concealed framing of MS tube size
1"x2"x18swg @ 24" c/c hang hang with 12mm dia threaded shaft on to slab / beams
up to any height including polish with lacquer over transparent sealer, 6" x 2" x 3mm
ID-301.
thick MS plate weld with shaft and fixed with wooden beam, epoxy jointing, making Rft.
(Detail - 01)
smooth surface, fixing arrangement for track light, welding, grinding, two coats of anti
rust paint, all fixing accessories and arrangements, scaffolding, wastages, etc.
Complete in all respects and as per drawing, design and directions of the Architect /
Engineer. (This job will be coordinated with electrical and air-conditioning works)
Talha
B O QPage 16 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, fabricating and placing of cash counter 12'-9" wide fabricated with partal
wood for framing, 3/4" thick laminated MDF board with pvc lipping, 1/2" thick red
meranti wood planks polish finish over 1/2" thick MDF board, 1/8" thick polish finish
Malaysian ply over laminated MDF (Out sides), 1/4" thick commercial ply polish finish,
3/8" thick approved solid acrylic surface (Corian / LG) over MDF board / wood,
ID-801. Set.
stainless steel brackets in drawers including making grooves, approved polish with
lacquer over transparent sealer, solignum treatment over wood, approved imported
hardwares (locks, runners, handles, catchers, etc.), epoxy joint, all fixing accessories
and arrangements, wastage, etc. Complete in all respects and as per drawing, details
and directions of the Architect / Engineer.
Providing, fabricating and placing of back counter 17'-4" wide fabricated with partal
wood for framing, laminated MDF board with pvc lipping, 3/8" thick approved solid
acrylic surface (Corian / LG) over MDF board, 1/2" thick polish finish red meranti wood
on edges including making grooves, approved polish with lacquer over transparent ID-802. Set.
sealer, solignum treatment over wood, all fixing accessories and arrangements,
wastage, etc. Complete in all respects and as per drawing, details and directions of the
Architect / Engineer.
8.3 Un-Stitched Display - Type "A", "B", "E". ( F-3, F-4, F-12 )
Providing, fabricating and fixing of red meranti wood vertical post size 3.5" x 3.5" fixed
with approved customized metal powder coated adjustable supports (floor, wall)
including fixing of owner supplied channels by visplay, making grooves, approved
ID-803, 806. Rft.
polish with lacquer over transparent sealer, wastage, all fixing accessories and
arrangements, etc. Complete in all respect and as per drawings, details and directions
of the Architect / Engineer.
Providing, fabricating and fixing of red meranti wood vertical post size 3.5" x 3.5" tie on
floor and beam / slab including fixing of owner supplied channels by visplay both sides,
making grooves, approved polish with lacquer over transparent sealer, all fixing
ID-803, 806. Rft.
accessories and arrangements, MS base plate fixed with anchor bolts, 1.5" x 1.5" paint
finish 16swg MS tube weld with base plates, wastages, etc. Complete in all respect
and as per drawings, details and directions of the Architect / Engineer.
Talha
B O QPage 17 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and fixing of wooden post fabricated with 2" x 3" polish finish solid red
meranti wood (vertical & horizontal) tie from floor to vertical post including approved
polish with lacquer over transparent sealer, all fixing accessories and arrangements,
ID-803, 806. Rft.
approved customized metal powder coated adjustable supports (wall & floor), wastage,
etc. Complete in all respect and as per drawings, details and directions of the Architect
/ Engineer.
Providing, fabricating and fixing of wooden rods fabricated with solid red meranti wood
size 1.5" x 1.5" including fixing of owner supplied brackets by visplay, approved polish
with lacquer over transparent sealer, all fixing accessories and arrangements, ID-803, 806. Rft.
wastages, etc. Complete in all respect and as per drawings, details & directions of the
Architect / Engineer.
Providing, fabricating and fixing of bottom panel fabricated with 1/8" thick polish finish
Malaysian ply over 1/2" thick MDF board with 1/2" x 2" solid polish finish red meranti
wood on edge and partal wood base frame including making grooves, approved polish
ID-803, 806.
with lacquer over transparent sealer, solignum treatment over wood, all fixing
accessories and arrangements, wastages, etc. Complete in all respect and as per
drawings, details & directions of the Architect / Engineer.
8.4 Pret. Display. ( F-5, F-6, F-14 ) [ Type - Bulk Head & Post ]
Providing and fixing of laminate panels (Kaindi 37813 Oak Severina by Pak Carpet)
fixed to aluminum section with epoxy including partal wood back frame size 2" x 2" @
24" c/c both way, fixing of owner supplied visplay channels, PVC clips fixed with GMSA ID-807, 812,
Sft.
glue @ 18" c/c, making grooves, adhesive, solignum treatment, all fixing accessories 818, 819.
and arrangements, scaffolding, wastage, etc. Complete in all respect and as per
drawings, details & directions of the Architect / Engineer.
Talha
B O QPage 18 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and fixing of 3" x 3" x 1" thick polish finish solid ash wood L shape on edges
of pret. display over already installed wooden bulkhead / boxing including making
ID-807, 812,
grooves, approved polish with lacquer over transparent sealer, all fixing accessories Rft.
818, 819.
and arrangements, wastage, etc. Complete in all respect and as per drawings, details
and directions of the Architect / Engineer.
Providing, fabricating and fixing of wooden shelf 16" deep fabricated with 1/8" thick
polish finish oak MDF both side over 1/2" thick MDF board with 3/8" thick solid polish
finish white ash wood on edges and partal wood frame including fixing of owner
ID-807, 812,
supplied shelf support by visplay, making grooves, approved polish with lacquer over Rft.
818, 819.
transparent sealer, solignum treatment, wastage, all fixing accessories and
arrangements, etc. Complete in all respect and as per drawings, details and directions
of the Architect / Engineer.
Providing, fabricating and fixing of bottom panel 16" deep fabricated with 1/8" thick
polish finish oak MDF over 1/2" thick MDF board with 1" thick solid polish finish white
ash wood on front edge, 3/8" thick solid polish white ash wood on other three sides
ID-807, 812,
and partal wood base frame including making grooves, approved polish with lacquer
818, 819.
over transparent sealer, solignum treatment, all fixing accessories and arrangements,
wastage, etc. Complete in all respect and as per drawings, details & directions of the
Architect / Engineer.
Providing, making and fixing of hangers using 1" x 1/2" solid SS tube 16swg (Grade
304) fixed on to already installed shelf including welding, grinding, polishing, cuts for ID-807, 812,
Nos.
cloth hangers, all fixing accessories and arrangements, wastages, etc. Complete in all 818, 819.
respect and as per drawings, details & directions of the Architect / Engineer.
Talha
B O QPage 19 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, fabricating and fixing of white ash wood vertical post size 3.5" x 3.5" fixed
on to wall & floor with approved customized metal powder coated adjustable supports
(Bottom & wall) including fixing of owner supplied channels by visplay, making ID-807, 812,
Rft.
grooves, approved polish with lacquer over transparent sealer, wastage, all fixing 818, 819.
accessories and arrangements, etc. Complete in all respect and as per drawings,
details and directions of the Architect / Engineer.
Providing, fabricating and fixing of white ash wood top support size 2" x 3.5" including
approved polish with lacquer over transparent sealer, all fixing accessories and ID-807, 812,
Rft.
arrangements, wastage, scaffolding, etc. Complete in all respect and as per drawings, 818, 819.
details and directions of the Architect / Engineer.
Providing, fabricating and fixing of white ash wood vertical post size 3.5" x 3.5"
including fixing of owner supplied channels by visplay, making grooves, approved
polish with lacquer over transparent sealer, customized metal powder coated support
ID-813. Rft.
brackets (Floor & wall), all fixing accessories and arrangements, wastage, scaffolding,
etc. Complete in all respect and as per drawings, details and directions of the Architect
/ Engineer.
Providing, fabricating and fixing of white ash wood top support size 2" x 3.5" including
approved polish with lacquer over transparent sealer, all fixing accessories and
ID-813. Rft.
arrangements, wastage, scaffolding, etc. Complete in all respect and as per drawings,
details and directions of the Architect / Engineer.
Providing, fabricating and placing of mannequin display using partal wood for frame,
16mm thick laminated MDF board, 1/8" thick oak MDF, white ash wood lipping all
around including approved polish with lacquer over transparent sealer, solignum ID-822.
treatment, all fixing accessories and arrangements, wastages, etc. Complete in all
respect and as per drawings, details and directions of the Architect / Engineer.
Talha
B O QPage 20 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and fabricating of trunk fabricated with 3/4" & 1/2" thick partal wood planks,
MS powder coated frame, approved metal handles, PVC heavy duty casters with lock
including making grooves, approved polish with lacquer over transparent sealer,
ID-813, 814. Nos.
powder coating, hardwares, all fixing accessories and arrangements, wastage, etc.
Complete in all respects and as per drawing, details and directions of the Architect /
Engineer.
Providing and installation of 5mm thick approved imported mirror pasted over 3mm
thick commercial ply fixed on to wooden wall / claddings including fixing adhesive,
ID-816. Sft.
wooden lipping, all fixing accessories and arrangements, wastage, etc. Complete in all
respects and as per drawing, details and directions of the Architect / Engineer.
Providing and fabricating of display table fabricated with 1.5" thick solid white ash
wood polish finish planks, partal wood, MS powder coated complete frame including
making grooves, approved polish with lacquer over transparent sealer, powder coating, ID-817. Nos.
all fixing accessories and arrangements, wastage, etc. Complete in all respects and as
per drawing, details and directions of the Architect / Engineer.
Providing, fabricating and fixing of un-stitched display - luxury size 4'-6" wide x 7'-6"
high x 13.5" deep fabricated with black granite over MDF base, solid sheesham wood
strips & rods, MS "T" bars, matt polish finish brass pipe connectors including approved
ID-820. Nos.
polish with lacquer over transparent sealer, customized adjustable support powder
coated, all fixing accessories and arrangements, wastage, etc. Complete in all
respects and as per drawing, details and directions of the Architect / Engineer.
Talha
B O QPage 21 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, fabricating and placing of wooden bench size 6'-0" x 1'-3" x 1'-6" fabricated
with 3" thick polish finish solid wood planks fixed with MS powder coated frame
including approved polish with lacquer over transparent sealer, welding, grinding, ID-823.
powder coating, all fixing accessories and arrangements, wastages, etc. Complete in
all respect and as per drawings, details and directions of the Architect / Engineer.
Providing, fabricating and placing of metal shoe display size 48" x 18" x 24" high
fabricated with 12swg MS sheet white powder coated including powder coating,
8.12.1 ID-821. Nos.
cutting, bending, gliders, all arrangements, wastage, etc. Complete in all respects and
as per drawing, details and directions of the Architect / Engineer.
Providing, fabricating and placing of wooden shoe display size 48" x 18" x 21"
fabricated with partal wood gliders, 16mm thick laminated MDF board, 1/8" thick oak
MDF, white ash wood lipping all around including approved polish with lacquer over
8.12.2 ID-821. Nos.
transparent sealer, solignum treatment, all fixing accessories and arrangements,
wastages, etc. Complete in all respect and as per drawings, details and directions of
the Architect / Engineer.
Providing, fabricating and placing of wooden shoe box fabricated with partal wood
gliders, 3/4" thick polish finish malaysion ply including approved polish with lacquer
over transparent sealer, solignum treatment, all fixing accessories and arrangements, ID-821. Nos.
wastages, etc. Complete in all respect and as per drawings, details and directions of
the Architect / Engineer.
Talha
B O QPage 22 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, fabricating and placing of stool size 1'-3" x 1'-3" x 1'-6" fabricated with polish
finish wood top made with 1/8" thick malaysion ply over 16mm thick laminated chip
board and partal wood framing, powder coated MS base frame including approved
ID-820. Nos.
polish with lacquer over transparent sealer, welding, grinding, powder coating, all fixing
accessories and arrangements, wastages, etc. Complete in all respect and as per
drawings, details and directions of the Architect / Engineer.
8.16 Planter.
Providing, fabricating and placing of planter fabricated with polish finish red meranti
solid wood strips fixed over MS powder coated finish frame including approved polish
with lacquer over transparent sealer, welding, grinding, painting, all fixing accessories ID-711.
and arrangements, wastages, etc. Complete in all respect and as per drawings, details
and directions of the Architect / Engineer.
Providing, fabricating and fixing of metal planter racks fabricated with 12swg MS sheet
black powder coated including powder coating, cutting, bending, welding, grinding, all
ID-707. Rft.
fixing accessories and arrangements, wastage, etc. Complete in all respects and as
per drawing, details and directions of the Architect / Engineer.
Talha
B O QPage 23 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, fabricating and fixing of metal planter wall base fabricated with 12swg MS
sheet black powder coated including powder coating, cutting, bending, welding,
ID-707. Rft.
grinding, all fixing accessories and arrangements, wastage, etc. Complete in all
respects and as per drawing, details and directions of the Architect / Engineer.
8.19 Mirrors.
Providing and installation of 5mm thick imported mirror pasted over already made dry
partition / cladding including adhesive, all fixing accessories and arrangements,
ID-706. Sft.
wastage, etc. Complete in all respects and as per drawing, details and directions of the
Architect / Engineer.
8.19.2 Toilet.
Providing and installation of 5mm thick imported mirror pasted over 1/4" thick
commercial ply including adhesive, 1.5" wide solid polish finish red meranti wood edge,
ID-707. Sft.
all fixing accessories and arrangements, wastage, etc. Complete in all respects and
as per drawing, details and directions of the Architect / Engineer.
8.20 Pantry.
Providing, fabricating and fixing of base cabinet fabricated with partal wood for
framing, 3/4" thick boticina marble top over 1/2" thick marine ply, 3/4" thick laminated
MDF board for back, shutters, base, dividers, etc. with pvc lipping including making
grooves, approved polish, SS sink bowl, sink mixture, solignum treatment, approved Rft.
imported hardwares (locks, catchers, handles, hinges, etc.), CC base, all fixing
accessories and arrangements, wastage, etc. Complete in all respects and as per
drawing, details and directions of the Architect / Engineer.
Talha
B O QPage 24 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing, fabricating and fixing of hanging cabinet fabricated with partal wood for
framing, 3/4" thick laminated MDF board for top, back, shutters, base, dividers, etc.
with pvc lipping polish finish including making grooves, approved polish, solignum
Rft.
treatment, approved imported hardwares (locks, catchers, handles, hinges, etc.), all
fixing accessories and arrangements, wastage, etc. Complete in all respects and as
per drawing, details and directions of the Architect / Engineer.
Providing, fabricating and fixing of lunch counter fabricated 3/4" thick boticina marble
top over 1/2" thick marine ply including MS paint finish base, all fixing accessories and
Rft.
arrangements, wastage, etc. Complete in all respects and as per drawing, details and
directions of the Architect / Engineer.
Providing and placing of metal storage racks size 44.5" wide x 96" high x 17" deep
fabricated with metal shelves (7 nos) of 1mm thick galvanized sheets, vertical legs (4
ID-102. Nos.
nos) of 2mm thick slotted angle paint finish including all fixing accessories and
arrangements, etc. Complete in all respect and directions of the Architect / Engineer.
Providing and placing of metal staff lockers size 36" x 72" x 18" (Six lockers in one
unit) fabricated with 22swg metal sheet, spray paint finish including all accessories and ID-102. Nos.
arrangements, etc. Complete in all respect and directions of the Architect / Engineer.
9.1 Paint.
Providing and applying three coats of matt enamel paint over MDF plain board /
plastered surfaces / wherever required including applying a coat of good quality primer,
9.1.1 filling and preparation of smooth finish base surface prior to applying paint, scaffolding, Sft.
etc. Complete in all respects and as per drawings & directions of the Architect /
Engineer.
Talha
B O QPage 25 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and applying three coats of matt enamel paint over laminated boards
including filling and preparation of smooth finish surface prior to applying paint,
9.1.2 Sft.
scaffolding, etc. Complete in all respects and as per drawings & directions of the
Architect / Engineer.
Chiseling / removing of existing external plaster including removing of debris from site
up to any lead and lift, scaffolding, cleaning of site, etc. Complete in all respects and as AB-106. Sft.
per directions of the Architect / Engineer.
Removing of existing glass shade along ribs including removing of debris from site up
to any lead and lift, scaffolding, cleaning of site, etc. Complete in all respects and as AB-106. Job.
per directions of the Architect / Engineer.
Dismantling of reinforced cement concrete along steel and finishes including removing
of debris from site up to any lead and lift, scaffolding, cleaning of site, etc. Complete in AB-106. Cft.
all respects and as per directions of the Architect / Engineer.
Talha
B O QPage 26 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and laying cast in place reinforced cement concrete for slab, beam OR
wherever required ratio 1:2:4 using approved quality (cement, sand, crush) including
reinforcement (steel), smooth finished formwork and its removal, compacting, ID-601. Cft.
vibrating, curing, wastage, all arrangements, etc. Complete in all respect and as per
drawing, details and directions of the Architect / Engineer.
Providing and laying of brick masonry 9" thick up to any height using first class burn
brick with cement sand jointing mortar ratio 1:5 including leveling, alignment, curing,
ID-601. Cft.
wastage, all arrangements, etc. Complete in all respect and as per drawing, details
and directions of the Architect / Engineer.
Providing and laying 1" thick plaster (Minimum 5/8" thick rough + 3/8" thick texture
surface) as per approved ratio and shade on external surfaces up to any height, level
and floor including 6" wide approved MS wire mesh between RRC & masonry / old &
new masonry joints, making edges (curves, chamfered, round, etc.), smooth finished in ID-601. Sft.
line, level, plumb, curing, scaffolding, hacking / chipping of existing surface for bonding
where necessary, wastage, all arrangements, etc. Complete in all respects and as per
drawing, details and directions of the Architect / Engineer.
Providing and laying minimum 3/4" thick plain cement sand plaster (ratio 1:5) on walls,
beams up to any height including minimum 6" wide approved MS wire mesh between
RRC & masonry / old & new masonry joints, making edges (curves, chamfered, round,
etc.), smooth finished in line, level, plumb, curing, scaffolding, hacking / chipping of ID-601. Sft.
existing surface for bonding where necessary, wastage, all arrangements, etc.
Complete in all respects and as per drawing, details and directions of the Architect /
Engineer.
Talha
B O QPage 27 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and laying water proof 3mm thick sheet membrane (Hi-Grip) with bitumen
and primer coat over existing screed including removing excess material, clean of all
surfaces of adjacent works required for the fixing of sheet, wastage, etc. Complete in ID-102. Sft.
all respect and laying as per manufacturer specification and directions of the Architect /
Project Manager.
Providing and laying water proofing of roof by two coats of master seal 550 (BASF)
including cleaning and chipping of surface, removing excess material, wastage, etc.
ID-102. Sft.
Complete in all respect and applying as per manufacturer specification and directions
of the Architect / Project Manager.
Providing and laying cast in place water proof cement concrete steel trowel finish floor
(Screed) Avg. 3" thick ratio 1:2:4 laid in panels and slope using approved quality
(cement, sand, crush) including laying of MS BRC weld mesh (M 66 of 6 SWG and
ID-102. Sft.
spacing of 150mmx150mm, compacting, curing, wastage, curing, all arrangements,
etc. Complete in all respect and as per drawing, details & directions of the Architect /
Engineer.
10.7.1 Floor.
Providing and fixing of approved silbatta stone tile (Blade cut) size 12" x 48" x 1.5"
thick on floor over already laid rough concrete floor (tiles to be fixed with approved dry
bond) including dry bond, approved grout, sealer, spacers if required, cutting, curing, ID-401, 403. Sft.
cleaning, wastage, all fixing accessories and arrangements, etc. Complete in all
respects and as per drawing, patterns and directions of the Architect / Engineer.
10.7.2 Steps.
Providing and fixing of approved silbatta stone tile (Blade cut) size 12" x 48" x 1.5"
thick on steps over already laid rough concrete floor (tiles to be fixed with approved dry
bond) including making nosing, dry bond, approved grout, sealer, cutting, curing, ID-401, 403. Sft.
cleaning, wastage, all fixing accessories and arrangements, etc. Complete in all
respects and as per drawing, patterns and directions of the Architect / Engineer.
Talha
B O QPage 28 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and fixing new wood screen up to any height using red meranti wood strips
fixed on already plastered surface including approved polish with lacquer over
transparent sealer, scaffolding, wastage, all fixing accessories and arrangements, etc. ID-601. Sft.
Complete in all respects and as per drawing, details & directions of the Architect /
Engineer.
Providing, fabricating and fixing MS sheet box / bulkhead on top of parapet wall size
24" x 6" fabricate with 14 SWG MS bended sheet including MS frame, wastage, light
cutting, continuous welding, grinding, anchoring, approved enamel paint three coats
ID-602. Rft.
over 2 coats of anti corrosive paint, all fixing accessories and arrangements,
scaffolding, etc. Complete in all respect and as per drawings, details & directions of the
Architect / Engineer.
10.10 Signage.
Providing, fabricating and fixing of signage with logo with fingers in English using 1/2"
thick solid acrylic (corian) cut letters to be fixed over external elevation screen
including all fixing accessories and arrangements, wastages, scaffolding, finishes, etc. ID-602. Job.
Complete in all respect and as per drawings, details and directions of the Architect /
Engineer.
10.11 Paint.
Providing and applying three coats of weather shield (water proof) paint over plastered
surface external walls including wastages, scaffolding, etc. Complete in all respects Sft.
and as per drawings & directions of the Architect / Engineer.
11.1 Water Closet. (Western Type) [ Porta - Basic price Rs. 15,000.00 ]
Providing and installation of complete set of approved western type white vitreous
water closet including thimble, traps C.P. brass stop cork, inlet and outlet connections,
DWV-101 to
making cuts holes in walls & floors and its repair, all fixing accessories and Nos.
103.
arrangements, etc. Complete in all respect as per drawings, specifications and
directions of the Architect / Engineer.
Talha
B O QPage 29 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and installation of complete set of approved hand wash basin under counter
top including PVC bottle trap, flexible connections, C.P. brass waste, making cuts
DWV-101 to
holes in walls & floors and its repair, all fixing accessories and arrangements, etc. Nos.
103.
Complete in all respect as per drawings, specifications and directions of the Architect /
Engineer.
11.3 Toilet Fittings & Accessories.
Providing & installation of the following approved toilet fittings & accessories. Complete DWV-101 to
in all respect and as per directions of the Architect / Engineer. 103.
11.3.2 Double bib cock with shower. [ Basic price Rs. 3,500.00 ] Nos.
Providing and laying of following PPRC water supply pipes for hot and cold water
supply system including all required fittings and accessories, cutting in walls and floor DWV-101 to
for embedding the pipes and its repair, etc. Complete in all respects and as per 103.
manufacturer instructions and directions of the Architect / Engineer.
Talha
B O QPage 30 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
Providing and laying of following Polypropylene soil and waste pipe including all
required fittings and accessories, joints, junctions, making openings in RCC / Block
DWV-101 to
masonry wall for embedding the pipes and its repair, dismantling of floor, excavation
103.
with back filling, floor repair, etc. Complete in all respects and as manufacturer
instructions and directions of the Architect / Engineer.
Providing & installation of the following approved brass body gate valves (Kitz) with
union. Complete in all respect and as per directions of the Architect / Engineer.
Providing and installation of complete floor drain including all required fittings and
DWV-101 to
accessories, etc. Complete in all respects and as per manufacturer instruction and Nos.
103.
directions of the Architect / Engineer.
11.8 Manhole.
Providing and constructing of complete manhole inner size 21" x 21" including 9" thick
masonry, 1/2" thick water proof plaster (in & out side), benching 1:2:4, 6" thick concrete
bed ratio 1:4:8, 3" thick RCC slab, 18" x 18" CI cover with MS "L" section, cutting of
DWV-02 Nos.
floor, excavation, pipe connection, curing, cutting, wastage, all required accessories
and arrangements, etc. Complete in all respects and as per drawing, details and
directions of the Architect / Engineer.
Talha
B O QPage 31 of 79 MDProject and Construction Management
Bill of Quantities
( Renovation, Interior & Furnishing Works )
S. # DESCRIPTION REF. DRG. # UNIT
IMPORTANT NOTES:
1- All prices should be quoted in “Pak. Rs." and inclusive of all taxes.
2- All quantities are estimated and may vary on final completion of the respective works. Actual work done quantity should be mea
3- Abbreviations used in the Bill of Quantities are defined as follows:
Sft. = Square Feet. (Length x height / width)
Cft. = Cubic Feet. (Length x height x width / depth)
Rft. = Running Feet. (Length / height / width)
Nos. = Numbers. (Each)
4- Finished surface area up to false ceiling height will be measured for partitions / claddings / boxing. However, these items should
minimum 4" high above false ceiling level.
5- Finished surfaces of false ceiling to be measured for billing.
6- B.O.Q. rates of each item of works are firm and final, variation / escalation in prices of material. Labor, T & P, duties / taxes, fuel
allowed against this contract during the currency of work or after works.
7- Sample of materials should be submitted to the Project In-charge for approval prior to use at site.
8- Approval for execution of any works shall be taken in prior from the Project In-charge.
9- Before execution of works mockups shall be submitted by the contractor. The finishing details, polish and color shall be approve
Project In-charge.
10 - Temporary Works will not be paid separately. All costs related to temporary work items are deemed to be included in the relevan
11 - The contractor shall be responsible for the rectifications of existing finishes, if damage during execution of works.
12 - Clean and dust free environment to be strictly maintained at the all time at site
Talha
B O QPage 32 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Talha
B O QPage 33 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Rs. 658,200.00
Talha
B O QPage 34 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Rs. 3,601,000.00
Rs. 953,850.00
Talha
B O QPage 35 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Talha
B O QPage 36 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Talha
B O QPage 37 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Rs. 4,914,575.00
Talha
B O QPage 38 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Talha
B O QPage 39 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
140
Talha
B O QPage 40 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Rs. 3,216,500.00
Talha
B O QPage 41 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Talha
B O QPage 42 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Rs. 2,136,475.00
Talha
B O QPage 43 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Rs. -
Talha
B O QPage 44 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Rs. 3,081,725.00
Talha
B O QPage 45 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Rs. -
Rs. -
Talha
B O QPage 46 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Talha
B O QPage 47 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
25 1800 45000
Talha
B O QPage 48 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Talha
B O QPage 49 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Talha
B O QPage 50 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
12
Talha
B O QPage 51 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Talha
B O QPage 52 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Talha
B O QPage 53 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
40
Talha
B O QPage 54 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Rs. 1,620,000.00
Talha
B O QPage 55 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
100
Talha
B O QPage 56 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
80
4000
Talha
B O QPage 57 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
220
45
Talha
B O QPage 58 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Rs. -
Rs. -
Rs. -
Talha
B O QPage 59 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
Rs. -
Rs. -
Rs. -
Rs. -
Rs. -
Rs. 634,400.00
Talha
B O QPage 60 of 79 MDProject and Construction Management
Khaadi
Link Road - Model Town
Lahore
pective works. Actual work done quantity should be measure for billing.
ary work items are deemed to be included in the relevant unit rates.
hes, if damage during execution of works.
Talha
B O QPage 61 of 79 MDProject and Construction Management
List of Approved Materials
( Renovation, Interior & Furnishing Works )
A- Materials shall be supplied only from the approved sources. However in all cases the contractor shall su
Project In-charge prior to deliver on site.
B- Approval of samples / mockups shall be taken from the Project In-charge before execution of works.
S. # Materials
3 Fine sand.
4 Water.
5 Reinforcement. (Steel)
6 Steel Sections.
7 Blocks.
8 Bricks.
10 Wire mesh. (For Old & New OR Masonry & RCC joints)
11 Porcelain tiles.
Talha MD
List of Approved MaterialsPage 62Project
of 79 and Construction Management
List of Approved Materials
( Renovation, Interior & Furnishing Works )
A- Materials shall be supplied only from the approved sources. However in all cases the contractor shall su
Project In-charge prior to deliver on site.
B- Approval of samples / mockups shall be taken from the Project In-charge before execution of works.
S. # Materials
19 Epoxy Hardener
21 Carpet tiles.
22 Partal wood.
23 Solignum.
26 Sheesham wood.
30 Marine ply.
Talha MD
List of Approved MaterialsPage 63Project
of 79 and Construction Management
List of Approved Materials
( Renovation, Interior & Furnishing Works )
A- Materials shall be supplied only from the approved sources. However in all cases the contractor shall su
Project In-charge prior to deliver on site.
B- Approval of samples / mockups shall be taken from the Project In-charge before execution of works.
S. # Materials
46 Polyester Putty.
Talha MD
List of Approved MaterialsPage 64Project
of 79 and Construction Management
List of Approved Materials
( Renovation, Interior & Furnishing Works )
A- Materials shall be supplied only from the approved sources. However in all cases the contractor shall su
Project In-charge prior to deliver on site.
B- Approval of samples / mockups shall be taken from the Project In-charge before execution of works.
S. # Materials
50 MS CR Tubes.
51 Glue.
52 Pasting adhesive.
53 Silicones Sealant.
54 Epoxy.
56 Wood Sealer.
57 Wooden Polish.
63 Anchor bolt.
Talha MD
List of Approved MaterialsPage 65Project
of 79 and Construction Management
List of Approved Materials
( Renovation, Interior & Furnishing Works )
A- Materials shall be supplied only from the approved sources. However in all cases the contractor shall su
Project In-charge prior to deliver on site.
B- Approval of samples / mockups shall be taken from the Project In-charge before execution of works.
S. # Materials
Talha MD
List of Approved MaterialsPage 66Project
of 79 and Construction Management
Khaadi
Link Road - Model Town
Lahore
ved sources. However in all cases the contractor shall submit complete technical details of materials and obtain approval from the
Manufacturer / Supplier
Falcon / Lucky / Pakland / Maple Leaf. (Only one brand shall be used to maintain consistency of shade specially for
CC finish flooring & fair face plaster)
As approved by the Engineer. (Aggregate shall be clean and free from clay loam, silt, and other deleterious matter)
As approved by the Engineer. (Fine sand shall be clean and free from clay loam, silt, and other deleterious matter)
Potable clean and clear water which does not have sweet, saline OR brackish taste to be used for mixing and
curing.
Ishtiaq steel / Al Farooq Iron Merchant / Mughal Steel / Saify Iron / Fazal Steel
Concrete Technology.
Talha MD
List of Approved MaterialsPage 67Project
of 79 and Construction Management
Khaadi
Link Road - Model Town
Lahore
ved sources. However in all cases the contractor shall submit complete technical details of materials and obtain approval from the
Manufacturer / Supplier
English make- Jaffer Brothers. (For rough wood Solignum Brown and for finish wood Solignum Colorless)
Talha MD
List of Approved MaterialsPage 68Project
of 79 and Construction Management
Khaadi
Link Road - Model Town
Lahore
ved sources. However in all cases the contractor shall submit complete technical details of materials and obtain approval from the
Manufacturer / Supplier
The Protectors.
Basfa - Gelaso.
Talha MD
List of Approved MaterialsPage 69Project
of 79 and Construction Management
Khaadi
Link Road - Model Town
Lahore
ved sources. However in all cases the contractor shall submit complete technical details of materials and obtain approval from the
Manufacturer / Supplier
International Industries Ltd. / Bashir Pipe Industries. / Kamal Pipe Industries. / Fazal steel
Cementex. (Pakistan)
Ressichem. (Pakistan)
Hilti / Mungo.
Imported China.
Talha MD
List of Approved MaterialsPage 70Project
of 79 and Construction Management
Khaadi
Link Road - Model Town
Lahore
ved sources. However in all cases the contractor shall submit complete technical details of materials and obtain approval from the
Manufacturer / Supplier
BASF-MASTERFLEX 700GG.
PVC. PVDF lacquer on both sides, protected against microbal and fungal attack, UV-protected, Low-wick. 650 gram
per sq.meter. Cold temperature - 40 C. High temperature + 70 C.
Talha MD
List of Approved MaterialsPage 71Project
of 79 and Construction Management
List of Approved Hardwares
( Renovation, Interior & Furnishing Works )
A- Materials shall be supplied only from the approved sources. However in all cases the contractor shall submit complete technical deta
from the Architect / Project In-charge prior to deliver on site.
B- Approval of samples / mockups shall be taken from the Architect / Project In-charge before execution of works.
Talha MDProject
List of Approved HardwaresPage 72 of 79 and Construction Management
List of Approved Hardwares
( Renovation, Interior & Furnishing Works )
A- Materials shall be supplied only from the approved sources. However in all cases the contractor shall submit complete technical deta
from the Architect / Project In-charge prior to deliver on site.
B- Approval of samples / mockups shall be taken from the Architect / Project In-charge before execution of works.
Talha MDProject
List of Approved HardwaresPage 73 of 79 and Construction Management
List of Approved Hardwares
( Renovation, Interior & Furnishing Works )
A- Materials shall be supplied only from the approved sources. However in all cases the contractor shall submit complete technical deta
from the Architect / Project In-charge prior to deliver on site.
B- Approval of samples / mockups shall be taken from the Architect / Project In-charge before execution of works.
100mmx300mmx1
35 S.S Push Plate Newise /Euroart
.5mm th
Talha MDProject
List of Approved HardwaresPage 74 of 79 and Construction Management
List of Approved Hardwares
( Renovation, Interior & Furnishing Works )
A- Materials shall be supplied only from the approved sources. However in all cases the contractor shall submit complete technical deta
from the Architect / Project In-charge prior to deliver on site.
B- Approval of samples / mockups shall be taken from the Architect / Project In-charge before execution of works.
Talha MDProject
List of Approved HardwaresPage 75 of 79 and Construction Management
Khaadi
Link Road - Model Town
Lahore
all cases the contractor shall submit complete technical details of materials and obtain approval
Origin Image
Italy
Italy
Italy
Italy
Pakistan
Pakistan
Pakistan
China
USA
Pakistan
Pakistan
Pakistan
Pakistan
UK/ Australia
Talha MDProject
List of Approved HardwaresPage 76 of 79 and Construction Management
Khaadi
Link Road - Model Town
Lahore
all cases the contractor shall submit complete technical details of materials and obtain approval
Origin Image
Thailand/Pakistan
Pakistan
UK/ Japan
Japan
Japan / UK
China
China
China
Germany
Germany
Germany
Pakistan
Pakistan
China
Talha MDProject
List of Approved HardwaresPage 77 of 79 and Construction Management
Khaadi
Link Road - Model Town
Lahore
all cases the contractor shall submit complete technical details of materials and obtain approval
Origin Image
HongKong
HongKong
Australia/ UK
Australia/ UK
Australia/ UK
Australia/ UK
China/UK
China/UK
China
China
Pakistan
HongKong
UK/ Australia
Pakistan
Talha MDProject
List of Approved HardwaresPage 78 of 79 and Construction Management
Khaadi
Link Road - Model Town
Lahore
all cases the contractor shall submit complete technical details of materials and obtain approval
Origin Image
Pakistan
Talha MDProject
List of Approved HardwaresPage 79 of 79 and Construction Management