This document provides a bituminous concrete mix design and blending sheet. It shows the individual gradations of five aggregate sizes (22.4mm, 11.2mm, 6.1mm, stone dust, filler) that will be blended together. The target percentages for blending are 30% 22.4mm, 25% 11.2mm, 25% 6.1mm, 18% stone dust, and 2% filler. Sieve analysis results are provided to check that the blended mix meets the job mix formula and specification limits for each sieve size. Variations from the target gradation and lower/upper limits are calculated.
This document provides a bituminous concrete mix design and blending sheet. It shows the individual gradations of five aggregate sizes (22.4mm, 11.2mm, 6.1mm, stone dust, filler) that will be blended together. The target percentages for blending are 30% 22.4mm, 25% 11.2mm, 25% 6.1mm, 18% stone dust, and 2% filler. Sieve analysis results are provided to check that the blended mix meets the job mix formula and specification limits for each sieve size. Variations from the target gradation and lower/upper limits are calculated.
This document provides a bituminous concrete mix design and blending sheet. It shows the individual gradations of five aggregate sizes (22.4mm, 11.2mm, 6.1mm, stone dust, filler) that will be blended together. The target percentages for blending are 30% 22.4mm, 25% 11.2mm, 25% 6.1mm, 18% stone dust, and 2% filler. Sieve analysis results are provided to check that the blended mix meets the job mix formula and specification limits for each sieve size. Variations from the target gradation and lower/upper limits are calculated.