Professional Documents
Culture Documents
HP Procurve Switch - Basic Configuration Guide I PDF
HP Procurve Switch - Basic Configuration Guide I PDF
com
Default HP Switch Settings Disable default SNMP string tagged vs. untagged
(config)# no snmp-server community public tagged interface passes VLAN information along
Default username is admin with no password.
with the traffic it sends, in the packet header. This is
Vlan 1 with DHCP client enabled to obtain an IP usually configured for switch or router on the other
address for switch management. Configure SSH and disable Telnet end.
Connect a new HP switch to network and once it got a (config)# ip ssh version 2
valid IP address, telnet to it and gain complete access untagged interface passes traffic without adding
(config)# ip ssh
with no authentication. VLAN tag, used for access port configuration.
Create VLAN Operator Access to status and counters menu, event log
however no configuration capabilities
(config)# vlan 4 name CLIENTS
SVI Configuration (config)# password manager user-name itadmin Switch01 and Switch 02:
New password for manager: ******** (config)# vlan 4
(config)# vlan 4 Please retype new password for manager: ******** (vlan-4)# tagged 10
(vlan-4)# ip address 10.10.10.1 255.255.255.0 Autorun is disabled as operator/manager password is
configured. (config)# vlan 5
Default Gateway (for switch administration) (vlan-5)# tagged 10
(config)# password operator user-name helpdesk
(config)# ip default-gateway 10.10.10.10 New password for manager: ******** //10 is switch port no.
Please retype new password for manager: ********
Interface Description Autorun is disabled as operator/manager password is
configured.
(config)# interface 24 name PRINTER-GF-W1 Trunk Port
//otherwise, you can choose to retain the usernames (‘manager’ and (EtherChannel in Cisco Terms)
Access Port for interface 24 ‘operator’ and set only the passwords)
(config)# password all
(config)# vlan 4
(vlan-4)# untagged 24
Switch Administration ACL
Enable / Disable port (access-class in Cisco)
(shut / no shut in Cisco Terms)
(config)# ip authorized-managers 10.10.10.5 255.255.255.255 access manager
(config)# interface 46 (config)# trunk 3-4 Trk1 LACP
(eth-46)# disable (config)# vlan 4
(config)# ip authorized-managers 192.168.2.0 255.255.255.0 access operator
(eth-46)# enable (vlan-4)# tagged Trk1