Professional Documents
Culture Documents
ACPro - SSeries9-12k-user Manual-6-27-18
ACPro - SSeries9-12k-user Manual-6-27-18
User Manual
Models
AWH09QC-A3DNA3D/I AWH09QC-A3DNA1D/O
AWH12QC-A3DNA3D/I AWH12QC-A3DNA1D/O
AWH09QC-D3DNA3D/I AWH09QC-D3DNA1D/O
AWH12QC-D3DNA3D/I AWH12QC-D3DNA1D/O
(Refrigerant R410A)
We reserve the right to correct any clerical errors.
Copyright 2018 AC pro.
Service Manual Se
6.6.and
Function andControl
Control Service Manual
6. Function Control
Function and
6.6.1Function
Remote
and
1. Function
6.1 Control
Controller
6.1 and
Remote
Remote Control
Controller
Introduction
Controller Introduction
Introduction
6.1 Remote Controller Introduction
1.1 Remote Controller Introduction
1 212))EXWWRQ
212))EXWWRQ 1 1212))EXWWRQ
1
2 212))EXWWRQ 02'(EXWWRQ
02'(EXWWRQ 2 202'(EXWWRQ
2
3 02'(EXWWRQ
)$1EXWWRQ )$1EXWWRQ
3 3)$1EXWWRQ
3
4 )$1EXWWRQ 6:,1*EXWWRQ
6:,1*EXWWRQ 4 46:,1*EXWWRQ
1 1 1
4
5 6:,1*EXWWRQ 785%2EXWWRQ
785%2EXWWRQ 5 5785%2EXWWRQ
3 3 3
2
1 2 2
5
3 5 5 5
6 785%2EXWWRQ
ŸEXWWRQ
Ÿ
ŸEXWWRQ
6 6ŸEXWWRQ
ŸŸ
4
2 4 4
6
5 6 6 6 ŸEXWWRQ
Ÿ
4
7 7 7 7 6/((3EXWWRQ 6/((3EXWWRQ
7 76/((3EXWWRQ
6
8 8 8
9
7 9 9 7
8 6/((3EXWWRQ
7(03EXWWRQ 7(03EXWWRQ
8 87(03EXWWRQ
8
11
9 11 11 10 10 10 8 7(03EXWWRQ
9 ,)((/EXWWRQ ,)((/EXWWRQ
9 9,)((/EXWWRQ
11 10
9 ,)((/EXWWRQ /,*+7EXWWRQ
/,*+7EXWWRQ 10 10/,*+7EXWWRQ
12 12 12 10
12 10
11 /,*+7EXWWRQ &/2&.EXWWRQ
&/2&.EXWWRQ 11 11&/2&.EXWWRQ
11 &/2&.EXWWRQ
7,0(5217,0(52)) 7,0(5217,0(52))
7,0(5217,0(52))
12 12 12
EXWWRQ EXWWRQ
EXWWRQ
7,0(5217,0(52))
12
EXWWRQ
Introduction
Introduction for Introduction
icons forfor
on display icons
onon
screen
icons display
display screen
screen
Introduction for icons
Introduction on display
for icons screen
on display screen
I feel I feel
I feel Set fan speed SetSet
fan fan speed
speed
Operation mode Operation
Operation mode
mode Send signal Send
Send signal
signal
I feel Set fan speed
7XUERPRGH 7XUERPRGH
7XUERPRGH
$XWRPRGH
Operation mode $XWRPRGH
$XWRPRGH Send signal
8ćKHDWLQJIXQFWLRQ 8ćKHDWLQJIXQFWLRQ
8ćKHDWLQJIXQFWLRQ
Cool mode Cool
Cool mode
mode 7XUERPRGH
$XWRPRGH
Dry mode Dry mode
Dry mode 8ćKHDWLQJIXQFWLRQ 6HWWHPSHUDWXUH
Cool mode 6HWWHPSHUDWXUH 6HWWHPSHUDWXUH
)DQPRGH )DQPRGH
)DQPRGH
Dry mode 6HWWHPSHUDWXUH
Heat mode Heat
Heat mode
mode Set time SetSet
timetime
)DQPRGH
7,0(5217,0(52)) 7,0(5217,0(52))
7,0(5217,0(52))
Heat mode &ORFN Set time
&ORFN &ORFN
Sleep mode Sleep
Sleep mode
mode 7,0(5217,0(52))
&KLOGORFN &KLOGORFN
&KLOGORFN
&ORFN
/LJKW Up Up & down swing
Sleep /LJKW
mode /LJKW Up & down swing
&KLOGORFN & down swing
Temp. display type Temp. display type
Temp. display type
/LJKW:Set temp. :Set temp. Up &:Indoor
down swing
:Set:Indoor
temp. ambient temp. :Indoor ambient
ambient temp.
temp.
Temp. display type
2XWGRRUDPELHQWWHPS
2XWGRRUDPELHQWWHPS2XWGRRUDPELHQWWHPS
:Set temp. :Indoor ambient temp.
2XWGRRUDPELHQWWHPS
Introduction
Introduction Introduction
for Introduction
buttons
for buttons for
on remote
for
on buttons
buttons
remote onon
controller remote
remote
controller controller
controller
Introduction
Note:Note: Note: on remote controller
for Note:
buttons
After puttingƔ$IWHUSXWWLQJWKURXJKWKHSRZHUWKHDLUFRQGLWLRQHUZLOOJLYHRXWDVRXQG2SHUDWLRQLQGLFWRU
through the power, the air conditioner will give out a sound. Operation
Ɣ$IWHUSXWWLQJWKURXJKWKHSRZHUWKHDLUFRQGLWLRQHUZLOOJLYHRXWDVRXQG2SHUDWLRQLQGLFWRU
LV21UHGLQGLFDWRU$I
indicator “ LV21UHGLQGLFDWRU$IWHU
“ is ON
LV21UHGLQGLFDWRU$IWHUWKDW
Ɣ$IWHUSXWWLQJWKURXJKWKHSRZHUWKHDLUFRQGLWLRQHUZLOOJLYHRXWDVRXQG2SHUDWLRQLQGLFWRU
Note:
\RXFDQRSHUDWHWKHDLUFRQGLWLRQHUE\XVLQJUHPRWHFRQWUROOHU
\RXFDQRSHUDWHWKHDLUFRQGLWLRQHUE\XVLQJUHPRWHFRQWUROOHU
(red indicator).\RXFDQRSHUDWHWKHDLUFRQGLWLRQHUE\XVLQJUHPRWHFRQWUROOHU
After that, you can operate the air conditioner by using remote controller.
Ɣ$IWHUSXWWLQJWKURXJKWKHSRZHUWKHDLUFRQGLWLRQHUZLOOJLYHRXWDVRXQG2SHUDWLRQLQGLFWRU LV21UHGLQGLFDWRU$IWHUWKDW
onƔ8QGHURQVWDWXVSUHVVLQJWKHEXWWRQRQWKHUHPRWHFRQWUROOHUWKHVLJQDOLFRQ
\RXFDQRSHUDWHWKHDLUFRQGLWLRQHUE\XVLQJUHPRWHFRQWUROOHU
RQWKHGLVSOD\RIUHPRWHFRQWUROOHUZLOO
status, pressing the button on the remote controller, RQWKHGLVSOD\RIUHPRWHFRQWUROOHUZLOOEOLQNRQFH
Ɣ8QGHURQVWDWXVSUHVVLQJWKHEXWWRQRQWKHUHPRWHFRQWUROOHUWKHVLJQDOLFRQ the signal icon “ RQWKHGLVSOD\RIUHPRWHFRQWUROOHUZLOOEOLQ
UnderƔ8QGHURQVWDWXVSUHVVLQJWKHEXWWRQRQWKHUHPRWHFRQWUROOHUWKHVLJQDOLFRQ “ on the display of the
remote controller DQGWKHDLUFRQGLWLRQHUZLOOJLYHRXWD³GH´VRXQGZKLFKPHDQVWKHVLJQDOKDVEHHQVHQWWRWKHDLUFRQGLWLRQHU
DQGWKHDLUFRQGLWLRQHUZLOOJLYHRXWD³GH´VRXQGZKLFKPHDQVWKHVLJQDOKDVEHHQVHQWWRWKHDLUFRQGLWLRQHU
DQGWKHDLUFRQGLWLRQHUZLOOJLYHRXWD³GH´VRXQGZKLFKPHDQVWKHVLJQDOKDVEHHQVHQWWRWKHDLUFRQGLWLRQHU
will bilnk once and the air conditioner will give out a “de” sound, which means the signal has
Ɣ8QGHURQVWDWXVSUHVVLQJWKHEXWWRQRQWKHUHPRWHFRQWUROOHUWKHVLJQDOLFRQ RQWKHGLVSOD\RIUHPRWHFRQWUROOHUZLOOEOLQNRQFH
been sent to the Ɣ8QGHURIIVWDWXVVHWWHPSHUDWXUHDQGFORFNLFRQZLOOEHGLVSOD\HGRQWKHGLVSOD\
Ɣ8QGHURIIVWDWXVVHWWHPSHUDWXUHDQGFORFNLFRQZLOOEHGLVSOD\HGRQWKHGLVSOD\
Ɣ8QGHURIIVWDWXVVHWWHPSHUDWXUHDQGFORFNLFRQZLOOEHGLVSOD\HGRQWKHGLVSOD\
air conditioner.
DQGWKHDLUFRQGLWLRQHUZLOOJLYHRXWD³GH´VRXQGZKLFKPHDQVWKHVLJQDOKDVEHHQVHQWWRWKHDLUFRQGLWLRQHU
theRIUHPRWHFRQWUROOHU,IWLPHURQWLPHURIIDQGOLJKWIXQFWLRQVDUHVHWWKHFRUUHVSRQGLQJLFRQVZLOOEHGLVSOD\HGRQWKHGLV
RIUHPRWHFRQWUROOHU,IWLPHURQWLPHURIIDQGOLJKWIXQFWLRQVDUHVHWWKHFRUUHVSRQGLQJLFRQVZLOOEHGLVSOD\HGRQWKHGLVSOD\RI
UnderRIUHPRWHFRQWUROOHU,IWLPHURQWLPHURIIDQGOLJKWIXQFWLRQVDUHVHWWKHFRUUHVSRQGLQJLFRQVZLOOEHGLVSOD\HGRQWKHGLVSOD
off status, set the temperature and clock icon will be displayed on the display of the remote
Ɣ8QGHURIIVWDWXVVHWWHPSHUDWXUHDQGFORFNLFRQZLOOEHGLVSOD\HGRQWKHGLVSOD\
controller (if timer UHPRWHFRQWUROOHUDWWKHVDPHWLPH8QGHURQVWDWXVWKHGLVSOD\ZLOOVKRZWKHFRUUHVSRQGLQJVHWIXQFWLRQLFRQV
UHPRWHFRQWUROOHUDWWKHVDPHWLPH8QGHURQVWDWXVWKHGLVSOD\ZLOOVKRZWKHFRUUHVSRQGLQJVHWIXQFWLRQLFRQV
UHPRWHFRQWUROOHUDWWKHVDPHWLPH8QGHURQVWDWXVWKHGLVSOD\ZLOOVKRZWKHFRUUHVSRQGLQJVHWIXQFWLRQLFRQV
on, timer off and light functions are set, the corresponding icons will be displayed on the
RIUHPRWHFRQWUROOHU,IWLPHURQWLPHURIIDQGOLJKWIXQFWLRQVDUHVHWWKHFRUUHVSRQGLQJLFRQVZLOOEHGLVSOD\HGRQWKHGLVSOD\RI
display of the remote controller at the same time); Under on status, the display will show the corresponding set
UHPRWHFRQWUROOHUDWWKHVDPHWLPH8QGHURQVWDWXVWKHGLVSOD\ZLOOVKRZWKHFRUUHVSRQGLQJVHWIXQFWLRQLFRQV
function icons.
1 7HFKQLFDO,
7HFKQLFDO,QIRUPDWLRQ7HFKQLFDO,QIR
24 24 24
24 7HFKQLFDO,QIRUPDWLRQ
ype
Service Manual
door ambient temp.
FunctionService
introduction
Manual for combination buttons
Function introduction for combination buttons
1. Energy-saving function
Function introduction for combination buttons Service Manual
8QGHUFRROLQJPRGHSUHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\WRVWDUWXSRUWXUQRIIHQHUJ\VDYLQJIXQFWLRQ:KHQHQHUJ\VDYLQJ
1. Energy-saving Service Manual
1. Enery-Savingfunction
IXQFWLRQLVVWDUWHGXS6(ZLOOEHVKRZQRQUHPRWHFRQWUROOHUDQGDLUFRQGLWLRQHUZLOODGMXVWWKHVHWWHPSHUDWXUHDXWRPDWLFDOO\DFFRUGLQJWR
Service Manual
Function Function introduction for combination buttons
H[IDFWRU\VHWWLQJWRUHDFKWRWKHEHVWHQHUJ\VDYLQJHIIHFW3UHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\DJDLQWRH[LWHQHUJ\VDYLQJ
8QGHUFRROLQJPRGHSUHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\WRVWDUWXSRUWXUQRIIHQHUJ\VDYLQJIXQFWLRQ:KHQHQHUJ\VDYLQJ
Under cooling mode, Press "TEMP" and "CLOCK" buttons simultaneously to start up or turn off energy-saving function. When
Function Function introduction
introduction for combination
for combination buttons buttons
IXQFWLRQ energy-saving function is started up, "SE" will be shown on1.remote Energy-saving
controller, function
and air conditioner will adjust the set tempera-
IXQFWLRQLVVWDUWHGXS6(ZLOOEHVKRZQRQUHPRWHFRQWUROOHUDQGDLUFRQGLWLRQHUZLOODGMXVWWKHVHWWHPSHUDWXUHDXWRPDWLFDOO\DFFRUGLQJWR
1. Energy-saving
1. Energy-saving function function 8QGHUFRROLQJPRGHSUHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\WRVWDUWXSRUWXUQ
ture automatically according to ex-factory setting to reach to the best energy-saving effect. Press "TEMP" and "CLOCK"
Note: H[IDFWRU\VHWWLQJWRUHDFKWRWKHEHVWHQHUJ\VDYLQJHIIHFW3UHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\DJDLQWRH[LWHQHUJ\VDYLQJ
8QGHUFRROLQJPRGHSUHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\WRVWDUWXSRUWXUQRIIHQHUJ\VDYLQJIXQFWLRQ:KHQHQHUJ\VDYLQJ
buttons simulataneously again to exit energy-saving function IXQFWLRQLVVWDUWHGXS6(ZLOOEHVKRZQRQUHPRWHFRQWUROOHUDQGDLUFRQGLWLRQHUZLOODGMXV
8QGHUFRROLQJPRGHSUHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\WRVWDUWXSRUWXUQRIIHQHUJ\VDYLQJIXQFWLRQ:KHQHQHUJ
will cancel sleep function.
Ɣ8QGHUHQHUJ\VDYLQJIXQFWLRQIDQVSHHGLVGHIDXOWHGDWDXWRVSHHGDQGLWFDQ¶WEHDGMXVWHG
IXQFWLRQ IXQFWLRQLVVWDUWHGXS6(ZLOOEHVKRZQRQUHPRWHFRQWUROOHUDQGDLUFRQGLWLRQHUZLOODGMXVWWKHVHWWHPSHUDWXUHDXWRPDWLFDOO\DFFRUGLQJWR
Note: H[IDFWRU\VHWWLQJWRUHDFKWRWKHEHVWHQHUJ\VDYLQJHIIHFW3UHVV7(03DQG&/2&.EX
IXQFWLRQLVVWDUWHGXS6(ZLOOEHVKRZQRQUHPRWHFRQWUROOHUDQGDLUFRQGLWLRQHUZLOODGMXVWWKHVHWWHPSHUDWXUHDXWRPDWLFDOO\DFF
Ɣ8QGHUHQHUJ\VDYLQJIXQFWLRQVHWWHPSHUDWXUHFDQ¶WEHDGMXVWHG3UHVV785%2EXWWRQDQGWKHUHPRWHFRQWUROOHUZRQ¶WVHQGVLJQDO
Note: H[IDFWRU\VHWWLQJWRUHDFKWRWKHEHVWHQHUJ\VDYLQJHIIHFW3UHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\DJDLQWRH[LWHQHUJ\VDYLQJ
Under energy-saving IXQFWLRQ
H[IDFWRU\VHWWLQJWRUHDFKWRWKHEHVWHQHUJ\VDYLQJHIIHFW3UHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\DJDLQWRH[LWHQHUJ
IXQFWLRQfunction, fan speed is defaulted at auto speed and it can't be adjusted.
Ɣ6OHHSIXQFWLRQDQGHQHUJ\VDYLQJIXQFWLRQFDQ¶WRSHUDWHDWWKHVDPHWLPH,IHQHUJ\VDYLQJIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGH
Ɣ8QGHUHQHUJ\VDYLQJIXQFWLRQIDQVSHHGLVGHIDXOWHGDWDXWRVSHHGDQGLWFDQ¶WEHDGMXVWHG
Under energy-saving IXQFWLRQ
function, set temperature can be Note: Press "TURBO" button and the remote controller won't
adjusted.
Note:
SUHVVVOHHSEXWWRQZLOOFDQFHOHQHUJ\VDYLQJIXQFWLRQ,IVOHHSIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHVWDUWXSWKHHQHUJ\VDYLQJ
Ɣ8QGHUHQHUJ\VDYLQJIXQFWLRQVHWWHPSHUDWXUHFDQ¶WEHDGMXVWHG3UHVV785%2EXWWRQDQGWKHUHPRWHFRQWUROOHUZRQ¶WVHQGVLJQDO
Note: Ɣ8QGHUHQHUJ\VDYLQJIXQFWLRQIDQVSHHGLVGHIDXOWHGDWDXWRVSHHGDQGLWFDQ¶WEHDGMXVWH
send signal. Ɣ8QGHUHQHUJ\VDYLQJIXQFWLRQIDQVSHHGLVGHIDXOWHGDWDXWRVSHHGDQGLWFDQ¶WEHDGMXVWHG
IXQFWLRQZLOOFDQFHOVOHHSIXQFWLRQ
Ɣ6OHHSIXQFWLRQDQGHQHUJ\VDYLQJIXQFWLRQFDQ¶WRSHUDWHDWWKHVDPHWLPH,IHQHUJ\VDYLQJIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGH
Ɣ8QGHUHQHUJ\VDYLQJIXQFWLRQVHWWHPSHUDWXUHFDQ¶WEHDGMXVWHG3UHVV785%2EXWWRQDQ
Ɣ8QGHUHQHUJ\VDYLQJIXQFWLRQIDQVSHHGLVGHIDXOWHGDWDXWRVSHHGDQGLWFDQ¶WEHDGMXVWHG
Sleep function Ɣ8QGHUHQHUJ\VDYLQJIXQFWLRQVHWWHPSHUDWXUHFDQ¶WEHDGMXVWHG3UHVV785%2EXWWRQDQGWKHUHPRWHFRQWUROOHUZRQ¶WVHQGVLJQDO
and energy-saving function can't operate at the same time. If energy-saving function has been set under
SUHVVVOHHSEXWWRQZLOOFDQFHOHQHUJ\VDYLQJIXQFWLRQ,IVOHHSIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHVWDUWXSWKHHQHUJ\VDYLQJ
cooling mode, press sleep button will cancel energy-saving Ɣ6OHHSIXQFWLRQDQGHQHUJ\VDYLQJIXQFWLRQFDQ¶WRSHUDWHDWWKHVDPHWLPH,IHQHUJ\VDYLQJ
Ɣ8QGHUHQHUJ\VDYLQJIXQFWLRQVHWWHPSHUDWXUHFDQ¶WEHDGMXVWHG3UHVV785%2EXWWRQDQGWKHUHPRWHFRQWUROOHUZRQ¶WVHQGVLJQ
Ɣ6OHHSIXQFWLRQDQGHQHUJ\VDYLQJIXQFWLRQFDQ¶WRSHUDWHDWWKHVDPHWLPH,IHQHUJ\VDYLQJIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGH
function. If sleep function has been set under ooling mode, start
2. 8 ć heating function
IXQFWLRQZLOOFDQFHOVOHHSIXQFWLRQ
up the energy-saving will cancel sleep function. SUHVVVOHHSEXWWRQZLOOFDQFHOHQHUJ\VDYLQJIXQFWLRQ,IVOHHSIXQFWLRQKDVEHHQVHWXQGHU
SUHVVVOHHSEXWWRQZLOOFDQFHOHQHUJ\VDYLQJIXQFWLRQ,IVOHHSIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHVWDUWXSWKHHQHUJ\VDYLQJ
Ɣ6OHHSIXQFWLRQDQGHQHUJ\VDYLQJIXQFWLRQFDQ¶WRSHUDWHDWWKHVDPHWLPH,IHQHUJ\VDYLQJIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPR
function
8QGHUKHDWLQJPRGHSUHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\WRVWDUWXSRUWXUQRIIćKHDWLQJIXQFWLRQ:KHQWKLVIXQFWLRQLV
IXQFWLRQZLOOFDQFHOVOHHSIXQFWLRQ IXQFWLRQZLOOFDQFHOVOHHSIXQFWLRQ
SUHVVVOHHSEXWWRQZLOOFDQFHOHQHUJ\VDYLQJIXQFWLRQ,IVOHHSIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHVWDUWXSWKHHQHUJ\VDYLQ
VWDUWHGXS2. 8 ć heating ZLOOEHVKRZQRQUHPRWHFRQWUROOHUDQGWKHDLUFRQGLWLRQHUNHHSWKHKHDWLQJVWDWXV
DQGć function
2. 8C Heating Function
2. 8 ć IXQFWLRQZLOOFDQFHOVOHHSIXQFWLRQ
heating function at 8ć 3UHVV7(03DQG
2. 8 ć heating function
&/2&.EXWWRQVVLPXOWDQHRXVO\DJDLQWRH[LWćpress "TEMP" KHDWLQJIXQFWLRQ
8QGHUKHDWLQJPRGHSUHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\WRVWDUWXSRUWXUQRIIćKHDWLQJIXQFWLRQ:KHQWKLVIXQFWLRQLV
Under heating mode, and "CLOCK" buttons simultaneously to start up or turn off 8C heating function. When
8QGHUKHDWLQJPRGHSUHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\WRVWDUWXSRUWXUQRIIćKHDWLQJIXQFWLRQ:KHQWKLVIXQFWLRQLV
2. 8 ć heating function 8QGHUKHDWLQJPRGHSUHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\WRVWDUWXSRUWX
Note: this functionDQGć
VWDUWHGXS is stared up, "ZLOOEHVKRZQRQUHPRWHFRQWUROOHUDQGWKHDLUFRQGLWLRQHUNHHSWKHKHDWLQJVWDWXV
VWDUWHGXS " and "8C"
DQGć will be shown on remote controller, and the air conditioner keep theatheating
ZLOOEHVKRZQRQUHPRWHFRQWUROOHUDQGWKHDLUFRQGLWLRQHUNHHSWKHKHDWLQJVWDWXV at 8ćstatus at
3UHVV7(03DQG
8ć 3UHVV7(03DQG
&/2&.EXWWRQVVLPXOWDQHRXVO\DJDLQWRH[LWć VWDUWHGXS DQGć ZLOOEHVKRZQRQUHPRWHFRQWUROOHUDQGWKHDLUFRQGLWLRQHUNHH
8QGHUKHDWLQJPRGHSUHVV7(03DQG&/2&.EXWWRQVVLPXOWDQHRXVO\WRVWDUWXSRUWXUQRIIćKHDWLQJIXQFWLRQ:KHQWKLVIX
KHDWLQJIXQFWLRQ
Ɣ8QGHUćKHDWLQJIXQFWLRQIDQVSHHGLVGHIDXOWHGDWDXWRVSHHGDQGLWFDQ¶WEHDGMXVWHG
8C. Press "TEMP" and "CLOCK" buttons simultaneously
&/2&.EXWWRQVVLPXOWDQHRXVO\DJDLQWRH[LWć again
KHDWLQJIXQFWLRQ to exit 8C heating function.
&/2&.EXWWRQVVLPXOWDQHRXVO\DJDLQWRH[LWć KHDWLQJIXQFWLRQ
Note: VWDUWHGXS DQGć ZLOOEHVKRZQRQUHPRWHFRQWUROOHUDQGWKHDLUFRQGLWLRQHUNHHSWKHKHDWLQJVWDWXV at 8ć 3UHVV7(
Note:
Ɣ8QGHUćKHDWLQJIXQFWLRQVHWWHPSHUDWXUHFDQ¶WEHDGMXVWHG3UHVVTURBOEXWWRQDQGWKHUHPRWHFRQWUROOHUZRQ¶WVHQGVLJQDO
Note: Note:
&/2&.EXWWRQVVLPXOWDQHRXVO\DJDLQWRH[LWć KHDWLQJIXQFWLRQ
Ɣ8QGHUćKHDWLQJIXQFWLRQIDQVSHHGLVGHIDXOWHGDWDXWRVSHHGDQGLWFDQ¶WEHDGMXVWHG
Under 8C heating function, fan speed is defaulted at autoƔ8QGHUćKHDWLQJIXQFWLRQIDQVSHHGLVGHIDXOWHGDWDXWRVSHHGDQGLWFDQ¶WEHDGMXVWHG
Ɣ6OHHSIXQFWLRQDQGćKHDWLQJIXQFWLRQFDQ¶WRSHUDWHDWWKHVDPHWLPH,Ić speed
Ɣ8QGHUćKHDWLQJIXQFWLRQIDQVSHHGLVGHIDXOWHGDWDXWRVSHHGDQGLWFDQ¶WEHDGMXVWHG
Note:
and it can't be adjusted
KHDWLQJIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHSUHVV
Ɣ8QGHUćKHDWLQJIXQFWLRQVHWWHPSHUDWXUHFDQ¶WEHDGMXVWHG3UHVVTURBOEXWWRQDQGWKHUHPRWHFRQWUROOHUZRQ¶WVHQGVLJQDO
Under 8C heating function, set temperature can be adjusted. Press "TURBO" button
VOHHSEXWWRQZLOOFDQFHOćKHDWLQJIXQFWLRQ,IVOHHSIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHVWDUWXSWKHćKHDWLQJIXQFWLRQZLOO and the remote controller won't send
Ɣ8QGHUćKHDWLQJIXQFWLRQVHWWHPSHUDWXUHFDQ¶WEHDGMXVWHG3UHVVTURBOEXWWRQDQGWKHUHPRWHFRQWUROOHUZRQ¶WVHQGVLJQDO
Ɣ6OHHSIXQFWLRQDQGćKHDWLQJIXQFWLRQFDQ¶WRSHUDWHDWWKHVDPHWLPH,Ić KHDWLQJIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHSUHVV
Ɣ8QGHUćKHDWLQJIXQFWLRQVHWWHPSHUDWXUHFDQ¶WEHDGMXVWHG3UHVVTURBOEXWWRQDQG
Ɣ8QGHUćKHDWLQJIXQFWLRQIDQVSHHGLVGHIDXOWHGDWDXWRVSHHGDQGLWFDQ¶WEHDGMXVWHG
signal.
FDQFHOVOHHSIXQFWLRQ VOHHSEXWWRQZLOOFDQFHOćKHDWLQJIXQFWLRQ,IVOHHSIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHVWDUWXSWKHćKHDWLQJIXQFWLRQZLOO
Ɣ6OHHSIXQFWLRQDQGćKHDWLQJIXQFWLRQFDQ¶WRSHUDWHDWWKHVDPHWLPH,Ić
Ɣ6OHHSIXQFWLRQDQGćKHDWLQJIXQFWLRQFDQ¶WRSHUDWHDWWKHVDPHWLPH,Ić KHDWLQJIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHSUHVV
Ɣ8QGHUćKHDWLQJIXQFWLRQVHWWHPSHUDWXUHFDQ¶WEHDGMXVWHG3UHVVTURBOEXWWRQDQGWKHUHPRWHFRQWUROOHUZRQ¶WVHQGVLJQDO KHDWLQJIXQF
Sleep functionFDQFHOVOHHSIXQFWLRQ
and 8C heating function can't oerate
Ɣ8QGHU̧WHPSHUDWXUHGLVSOD\WKHUHPRWHFRQWUROOHUZLOOGLVSOD\
at the same time. If 8C heating functionKHDWLQJIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHS
has been set under cooling
VOHHSEXWWRQZLOOFDQFHOćKHDWLQJIXQFWLRQ,IVOHHSIXQFWLRQKDVEHHQVHWXQGHUFRROLQJP
Ɣ6OHHSIXQFWLRQDQGćKHDWLQJIXQFWLRQFDQ¶WRSHUDWHDWWKHVDPHWLPH,Ić
VOHHSEXWWRQZLOOFDQFHOćKHDWLQJIXQFWLRQ,IVOHHSIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHVWDUWXSWKHćKHDWLQJIXQFWLRQZLOO
̧KHDWLQJ
mode, press sleepƔ8QGHU̧WHPSHUDWXUHGLVSOD\WKHUHPRWHFRQWUROOHUZLOOGLVSOD\
button will cancel 8C heating function. IfFDQFHOVOHHSIXQFWLRQ
sleep function has been under cooling mode, start up the *C
̧KHDWLQJ
FDQFHOVOHHSIXQFWLRQ VOHHSEXWWRQZLOOFDQFHOćKHDWLQJIXQFWLRQ,IVOHHSIXQFWLRQKDVEHHQVHWXQGHUFRROLQJPRGHVWDUWXSWKHćKHDWLQJIXQFWLRQZ
heating function3.will
3. Child lock function cancel
Child lock sleep
function function.
FDQFHOVOHHSIXQFWLRQ Ɣ8QGHU̧WHPSHUDWXUHGLVSOD\WKHUHPRWHFRQWUROOHUZLOOGLVSOD\ ̧KHDWLQJ
Ɣ8QGHU̧WHPSHUDWXUHGLVSOD\WKHUHPRWHFRQWUROOHUZLOOGLVSOD\
Uder F temperature display, the remote controller will display 46F ̧KHDWLQJ
heating.
Ɣ8QGHU̧WHPSHUDWXUHGLVSOD\WKHUHPRWHFRQWUROOHUZLOOGLVSOD\
3UHVVŸDQG VLPXOWDQHRXVO\WRWXUQRQRUWXUQRIIFKLOGORFNIXQFWLRQ:KHQFKLOGORFNIXQFWLRQLVRQ
3UHVVŸDQG VLPXOWDQHRXVO\WRWXUQRQRUWXUQRIIFKLOGORFNIXQFWLRQ:KHQFKLOGORFNIXQFWLRQLVRQ LFRQLVGLVSOD\HGRQUHPRWH
̧KHDWLQJ LFRQLVGLVSOD\HGRQUHPRWH
Ÿ Ÿ
3. Child lock function
3. Child lock FRQWUROOHU,I\RXRSHUDWHWKHUHPRWHFRQWUROOHUWKH
function LFRQZLOOEOLQNWKUHHWLPHVZLWKRXWVHQGLQJVLJQDOWRWKHXQLW
FRQWUROOHU,I\RXRSHUDWHWKHUHPRWHFRQWUROOHUWKH LFRQZLOOEOLQNWKUHHWLPHVZLWKRXWVHQGLQJVLJQDOWRWKHXQLW
3. Child Lock Function3. Child lock function 3UHVVŸDQG VLPXOWDQHRXVO\WRWXUQRQRUWXUQRIIFKLOGORFNIXQFWLRQ:KHQFKLOGORFN
Ÿ
3UHVVŸDQG VLPXOWDQHRXVO\WRWXUQRQRUWXUQRIIFKLOGORFNIXQFWLRQ:KHQFKLOGORFNIXQFWLRQLVRQ
4. Temperature display switchover function LFRQLVGLVSOD\HGRQUHPRWH
Ÿ
Press "▲" or "▼" simultaneously to turn on or turn off child FRQWUROOHU,I\RXRSHUDWHWKHUHPRWHFRQWUROOHUWKH
lock function. When child lock function is on, " LFRQZLOOEOLQNWKUHHWLPHVZLWKRXWVH
3UHVVŸDQG VLPXOWDQHRXVO\WRWXUQRQRUWXUQRIIFKLOGORFNIXQFWLRQ:KHQFKLOGORFNIXQFWLRQLVRQ
Ÿ " icon is dis- LFRQLVGLVSOD\HGR
4. Temperature display switchover function
played on remote8QGHU2))VWDWXVSUHVV
FRQWUROOHU,I\RXRSHUDWHWKHUHPRWHFRQWUROOHUWKH DQG02'(EXWWRQVVLPXOWDQHRXVO\WRVZLWFKWHPSHUDWXUHGLVSOD\EHWZHHQć and ̧sending
.
Ÿ
controller. If you operate the remoteLFRQZLOOEOLQNWKUHHWLPHVZLWKRXWVHQGLQJVLJQDOWRWKHXQLW
controller, the " LFRQZLOOEOLQNWKUHHWLPHVZLWKRXWVHQGLQJVLJQDOWRWKHXQLW
FRQWUROOHU,I\RXRSHUDWHWKHUHPRWHFRQWUROOHUWKH " incon will blink three times without signal
8QGHU2))VWDWXVSUHVV DQG02'(EXWWRQVVLPXOWDQHRXVO\WRVZLWFKWHPSHUDWXUHGLVSOD\EHWZHHQć
4. Temperature display switchover and
function .
Ÿ
to the unit. ̧
4. Temperature display Operation guide function
switchover
4. Temperature display switchover function8QGHU2))VWDWXVSUHVV DQG02'(EXWWRQVVLPXOWDQHRXVO\WRVZLWFKWHPSHUDWXUHGLV
Ÿ
$IWHUSXWWLQJWKURXJKWKHSRZHUSUHVV212))EXWWRQRQUHPRWHFRQWUROOHUWRWXUQRQWKHDLUFRQGLWLRQHU
Operation 8QGHU2))VWDWXVSUHVV
guide 8QGHU2))VWDWXVSUHVV
Function DQG02'(EXWWRQVVLPXOWDQHRXVO\WRVZLWFKWHPSHUDWXUHGLVSOD\EHWZHHQć and ̧ .
Ÿ
4. Temperature Display DQG02'(EXWWRQVVLPXOWDQHRXVO\WRVZLWFKWHPSHUDWXUHGLVSOD\EHWZHHQć
Switchover and ̧ .
Ÿ
3UHVV02'(EXWWRQWRVHOHFW\RXUUHTXLUHGPRGH$872&22/'5<)$1+($7
Under OFF status, press "▼" and "MODE" buttons simultaneously Operation guidetemperature display between C and F.
to switch
$IWHUSXWWLQJWKURXJKWKHSRZHUSUHVV212))EXWWRQRQUHPRWHFRQWUROOHUWRWXUQRQWKHDLUFRQGLWLRQHU
3UHVVŸRU EXWWRQWRVHW\RXUUHTXLUHGWHPSHUDWXUH7HPSHUDWXUHFDQ¶WEHDGMXVWHGXQGHUDXWRPRGH
Ÿ
7HFKQLFDO,QIRUPDWLRQ
7HFKQLFDO,QIRUPDWLRQ
4
7HFKQLFDO,QIRUPDWLRQ 27
7HFKQLFDO,QIRUPDWLRQ 27
1.2 Brief Description of Modes and Functions
b. Drying Mode
• Temperature setting range is 60.80F - 86.00F.
• The fan will operate at low speed and the swing will operate at normal speed.
• Should the outdoor unit malfunction or should it go into Protection Mode, the indoor unit will maintain operational
status.
• Sleep function is not available in Drying Mode.
c. Heating Mode
• Temperature setting range is 60.80F - 86.00F.
• While in Heating Mode, the indoor unit will enter into cold air prevention status. When the unit stops (or is turned off),
the indoor unit enters into residual heat blowing status.
d. Auto Mode
• Heating preset = 680F. Cooling preset = 770F. The unit will switch between cooling and heating automatically.
• Should the outdoor unit malfunction or should it go into Protection Mode, the indoor unit will maintain operational
status.
e. Fan Mode
• Temperature setting range is 60.80F - 86.00F.
• The fan will operate at its user set speed on the indoor unit.
• Indoor fan can operate at HIGH, MEDIUM, LOW, or AUTO fan speed.
Other Controls
a. Buzzer
• During start-up, the indoor unit will beep indicating it has been turned on.
b. Auto Button
• Pressing the AUTO button will put the unit in auto mode.
• The indoor unit fan will operate at auto fan speeds (variable based on ambient temperature) and swing will function
while auto mode is on.
c. Auto Fan
• During auto heating mode, the auto fan speed will adjust the fan speed automatically based on ambient temperature.
d. Sleep
• Once Sleep Mode is engaged, the system will adjust the set temperature automatically based on ambient temperature.
e. Timer Function
• General timer and clock timer can be customized using the remote controller.
f. Memory Function
• This function can memorize temperature settings, modes, swing settings, light, fan speeds, and general timer setting.
• Unit can be turn on based on memory settings.
• Clock timer cannot be memorized.
g. Health Function
• While the indoor fan is engaged, you can set this function by use of the remote controller.
• Turning on the unit using the AUTO Button, will turn the health function on by default.
• Turning off the unit will cancel the Health Function.
5
h. I Feel Control Mode
• Pressing the I Feel Button programs the unit to ambient temperature settings.
l. Off-Peak Function
• The default minimum stop time is 180 seconds meaning the time interval between two start-ups of the compressor
cannot be less than 180 seconds.
m. SE Control Mode
• The unit operates at SE status.
n. X-Fan Mode
• When X-Fan function is engaged, the indoor fan will still operate at low speed for 2 minutes. After 2 minutes, the entire
unit will shut down.
6
Outdoor Unit
1. Check the ambient temperature compensation function and the indoor ambient temperature compensation function.
a. Cooling mode – Indoor ambient temperature computing control model = (T indoor ambient temperature - T cooling
indoor ambient temperature compensation).
b. Heating mode - Indoor ambient temperature computing control model = (T indoor ambient temperature - T heating
indoor ambient temperature compensation).
3. Basic Functions
a. Cooling Mode
• Conditions and Processes of Cooling Operation:
• If the compressor is shut down, and [T setup – (T indoor ambient temperature T cooling indoor ambient
temperature compensation)] ≤ 32.9ºF, the cooling operation will start.
• If cooling operation is 32ºF ≤ [T setup – (T indoor ambient temperature - T cooling indoor ambient temperature
compensation)] < 35.6ºF, the cooling operation will continue to run.
• If cooling operation is 35.6ºF ≤ [T setup – (T indoor ambient temperature - T cooling indoor ambient temperature
compensation)], the cooling operation will stop after reaching the temperature set point.
b. Temperature Setting Range
• If T outdoor ambient temperature ≥ [T low temperature cooling temperature], the temperature can be set at 61ºF –
86ºF (Cooling at room temperature).
• If T outdoor ambient temperature < [T low temperature cooling temperature], the temperature can be set at 77ºF –
86ºF (cooling temperature), that is the minimum temperature setting for the outdoor set to 77ºF.
4. Dehumidifying Mode
a. Temperature setting range is 61.0ºF - 86.0ºF.
b. Conditions of dehumidifying process: see cooling operations above.
6. Heating Mode
a. Conditions and Processes of Heating Operation:
• (T ambient temperature is the actual detection temperature of indoor environment thermos-bulb. Indoor ambient
temperature compensation during heating operations).
• If the compressor is shut down, and [(T indoor ambient temperature - T heating indoor ambient temperature
compensation) – T setup] ≤ 32.9ºF, start the unit to enter heating operations.
• If heating operation is 32ºF ≤ [(T indoor ambient temperature - T heating indoor ambient temperature
compensation) – T setup] < 35.6ºF, the heating operation will continue to run.
• If heating operation is 35.6ºF ≤ [(T indoor ambient temperature - T heating indoor temperature compensation) –
T setup], the heating operation will stop after reaching the temperature set point.
b. Temperature setting range is 61.0ºF - 86.0ºF
7
1. Special Functions
a. Defrosting Control
• Conditions for defrosting
• After the time for defrosting is judged to be satisfied, if the temperature for defrosting is satisfied after detections
for continuous 3 minutes, the defrosting operation will start.
• Conditions of finishing defrosting
• The defrosting operation can exit when any of the conditions below is satisfied.
• T outdoor temperature ≥ (T outdoor ambient temperature – [T temperature 1 of finishing defrosting]).
• The continuous running time of defrosting reaches [maximum defrosting time].
b. Control Logic
• Compressor Control
• Start the compressor after starting cooling, heating dehumidifying, operations and the outer fans start for
5 seconds. When the machine is shutdown, in safety stops and when switching to air-supplying mode, the
compressor will stop immediately. In all modes: once the compressor starts up, it will not be allowed to stop until
having run the [T minute compressor running time]. (Note: including cases of shutdown when the temperature
point is reached; except the cases requiring stopping the compressor such as fault protection, remote shutdown,
mode switching, etc.). In all modes: once the compressor stops, it will be allowed be restart after 3 minute
delay. (Note: The indoor units have a function of power memory, the machine can be restarted after the remote
shutdown and powering up again without delay).
c. Cooling Mode.
• Start the machine to enter cooling operation for cooling, the compressor is switched on.
d. Dehumidifying Mode
• Same as cooling mode.
e. Air Supplying Mode
• The compressor is switched off.
f. Heating Mode
• Start the machine to enter into heating operation for heating, the compressor is switched on.
• Defrosting starts: the compressor is shut down and restarts it after 55-second delay.
• Defrosting ends: the compressor stops, then starts after 55-second delay.
8
1. Starting Estimation
a. After the compressor stopped working for 180 seconds, if T inner pipe > [T frozen prevention frequency limited
temperature (the temperature of hysteresis is 35.6ºF)], the machine is only allowed to start for operating, otherwise it
should not be started, and should be stopped to treat according to the frozen preventing protection: Clear the trouble
under the mode of power turn-off/heating, and the protection times are not counted.
2. Frequency Limited
a. [T frozen preventing normal speed frequency reducing temperature] ≤ [T inner pipe T frozen preventing frequency
limited temperature], you should limit the frequency raising of compressor.
5. Power Turn-Off
a. If the T inner pipe < [T frozen preventing power turn-off temperature], then frozen preventing protect to stop the
machine. If T [frozen preventing frequency limited temperature] < T inner pipe, and the compressor has stopped
working for 3 minutes, the whole machine should be allowed to operate.
b. If the frozen preventing protection power turn-off continuously occurs for six times, it should not be resumed
automatically and you should press ON/OFF button to resume if the fault keeps on. During the process of running,
if the running time of compressor exceeds the T evaporator frozen preventing protection times zero clearing time,
the times of frozen preventing power turn-off should be cleared to recount. The mode of stopping the machine or
transferring to supply air will clear the trouble times immediately (if the trouble cannot be resumed, mode transferring
will not clear it).
9
c. Frequency Limited
• If [T heating overload frequency limited temperature] ≤ T inner pipe < [T heating overload frequency reducing
temperature at normal speed], you should limit the frequency raising of the compressor.
d. Reducing Frequency at Normal Speed and Stopping Machine
• If [T heating overload frequency reducing temperature at normal speed] ≤ T inner pipe < [T heating overload
frequency reducing temperature at high speed], you should adjust the compressor frequency by reducing 8Hz/90
seconds until the lower limit. After it was running 90 seconds at the lower limit, if T heating overload frequency
reducing temperature at normal speed ≤ T inner pipe, then overload protects machine stopping.
e. Reducing Frequency at High Speed and Power Turn-off
• If [T heating overload frequency reducing temperature at high speed] ≤ T inner pipe < [T heating overload power
turn-off temperature], you should adjust the compressor frequency by reducing 30Hz/90 seconds until the lower
limit. After it was running 90 seconds at the lower limit, if T heating overload frequency reducing temperature at
normal speed ≤ T outer pipe, then cooling overload protects machine stopping.
f. Power Turn-off
• If [T heating overload power turn-off temperature] ≤ T inner pipe, then overload protects machine stopping. If T
inner pipe T heating overload frequency limited temperature and the compressor has been stopped working for 3
minutes, the machine should be allowed to operate.
• If the overload protection power turn-off continuously occurs six times, it should not be resumed automatically and
you should press the ON/OFF button to resume if the fault keeps on. During the process of running, if the run time
of compressor exceeds the T overload protection times zero clearing time, the times of overload protection power
turn-off should be cleared to recount. The mode of stopping the machine or transferring to supply air will clear the
trouble times immediately (if the trouble cannot be resumed, transferring mode will not clear it). Protective function
for discharge temperature of compressor.
g. Starting Estimation
• After the compressor starts working for 180 seconds, if T discharge < discharge limited temperature (the
temperature of hysteresis is 35.6ºF), the machine is allowed to start, otherwise it should not be started, and should
be stopped to treat according to the discharge temperature. The machine should be stopped or transferred to
supply air, the trouble should be cleared immediately, and the protection times are not counted.
h. Frequency Limited
• If [T limited frequency temperature during discharging] ≤ T discharge < [T frequency reducing temperature at normal
speed during discharging], you should limit the frequency raising of the compressor.
i. Reducing Frequency at Normal Speed and Stopping Machine
• If [T frequency reducing temperature at normal speed during discharging] ≤ T discharge < [T frequency reducing
temperature at high speed during discharging], you should adjust the compressor frequency by reducing
8Hz/90 seconds until the lower limit. After it was running 90 seconds at the lower limit, if {T frequency reducing
temperature at normal speed during discharging] ≤ T discharge, you should discharge to protect machine stopping.
j. Reducing Frequency at High Speed and Power Turn-off
• If [T frequency reducing temperature at high speed during discharging] ≤ T discharge < [T stop temperature during
discharging], you should adjust the compressor frequency by reducing 30Hz/90 seconds until the lower limit.
After it was running 90 seconds at the lower limit, if {T frequency reducing temperature at normal speed during
discharging] ≤ T discharge, you should discharge to protect machine stopping.
k. Power Turn-off
• If [T power turn-off temperature during discharging] ≤ T discharge, you should discharge to protect machine
stopping. If [T discharge] < [T limited frequency temperature during discharging] and the compressor has been
stopped for 3 minutes, the machine should be allowed to operate.
• If the discharging temperature protection of compressor continuously occurs 6 times, it should not be resumed
automatically and you should press the ON/OFF button to resume. During the process of running, if the running
time of compressor exceeds the T protection times clearing of discharge, the discharge protection is cleared to
recount. Stopped or transferred to supply air mode will clear the trouble times immediately (if the trouble protection
cannot be resumed, mode transferring also will not clear it.).
l. Frequency Limited
• If [I limited frequency when overcurrent] ≤ I AC electric current < [I frequency reducing when overcurrent], you
should limit the frequency raising of compressor.
m.Reducing Frequency
• If [I frequency reducing when overcurrent] ≤ [I AC electric current I power turn-off when overcurrent], you should
reduce the compressor frequency until the lower limit or exit the frequency reducing condition.
n. Power Turn-Off
• If [I power turn-off machine when overcurrent] ≤ [I AC electric current], you should carry out the overcurrent
stopping protection. If I AC electric current < [T limited frequency when overcurrent] and the compressor and the
compressor has been stopped for 3 minutes, the machine should be allowed to operate.
10
• If the overcurrent protection continuously occurs 6 times, it should not be resumed automatically and you should
press the ON/OFF button to resume. During the process of running, if the running time of compressor exceeds the
[T protection times clearing of overcurrent], the discharge protection is cleared to recount.
9. Communication Fault
a. When a signal fails to come from the indoor unit within 3 minutes, the machine will stop for a communication fault.
When you have not received a signal from the driver IC (aim the remote controller for the separating of main control IC
and driver IC), and the machine will stop for communication is resumed, the machine will be allowed to operate.
13
your smartphone:
SMARTPhONE CONTROLS
above . 1.3 GREE + APP OPERATION MANUAL
4 .0 and above .
Control the comfort
Control - With
the comfort your
– with smartphone!
your smartphone!
Control the comfort – with your smartphone!
For the ultimate in convenience, selected AC Pro Heat Pump and Air Conditioner models feature a
For the ultimate in convenience, selected Gree Heat Pump and Air Conditioner models feature a built-in intelligent
built-in intelligent WiFi capability and GREE+ SmartPhone app. This allows you to operate the unit
WIFI capability and GREE+ SmartPhone app . This allows you to operate the unit through your smartphone anywhere a
ur phone. through your smartphone anywhere a WIFI network can be found. The GREE+ app is compatible with
WIFI network can be found . The GREE+ app is compatible with devices using standard Android or iOS operating systems .
devices using standard Android or iOS operating systems.
ONTROLS
Apple Store Google Play Store
I INTERFACE. Remote controls without a “WIFI” button: press and hold both the
WIFI” button: turn ON the Gree
“Mode” andsystem .
“Turbo”Press and hold
buttons for the “WIFI” until the unit beeps for the
10 seconds
second time and the WIFI icon
til the unit beeps for the second time and the WIFI icon appears on the display. Repeat the
appears
e procedure to turnprocedure
WIFI mode to turn WIFI mode OFF.
OFF . Remote with WIFI button
14
SMARTPhONE CONTROLS
For future
For future reference,
reference, recordrecord the user
the user name,email
name, email address
addressandand
password used to set
password usedup your account .
to set up your account.
UserUser Name:_________________________________________________________________________________
Name: _________________________________________________________________________________
15
NE CONTROLS
SMARTPhONE CONTROLS
SMARTPhONE
SMARTPhONE CONTROLS
CONTROLS
ETWORk TO ThE
STEP 4. GREE+ APP.
WIFI network
ADD the 4:
Step
YOUR Gree
WIFIunit
Add will beWIFI
your
NETWORk connected
TO ThE network
GREE+to and to the GREE+ app.
APP.
STEP
STEP 4.
4.
rough . From
This the
Theis theMylocal
GREE+ Home WIFIscreen,
Login screen
network tap the
Gree“+”
thewill be unitdisplayed.
will be connected to and
ADD
ADD YOUR
YOUR WIFI
WIFI NETWORk
NETWORk TO ThE GREE+ APP.
r WIFI network . Select your
communicating home
through . or office
From HomeThE
the MyWIFI TO GREE+
screen, tap theAPP.
“+”
This is This
the
This isis the
local the local
WIFI
local WIFI
network
WIFI networkthe
network the
AC Gree
Pro unit
unit will
will bebeconnected
connected to
to and
to and
r the WIFIbutton
network password .
to add your WIFIIfnetwork .
you want Select your home or office WIFIbe
GREE+ the Gree unit will connected and
ur network network
password,
communicating
communicating
communicating
and enter through.
the WIFI
check
through .
From
through .
the network
Fromthe the
My
From theIfMy
password .
box (optional) .
My Home
Home
youHome screen,
screen,
want GREE+ tap
tap the
the
screen, tap the “+” “+”
“+”
button
to rememberto add
button
your toyour
add
networkWIFI
your network.
WIFI network .
password, Select
check your
Select
the boxyourhome
home
(optional) . or
or office
office WIFI
WIFI
for Device” button .
network button
and to addthe
enter your WIFInetwork
WIFI network . password.
Select your home
If you orwant
officeGREE+
WIFI
network
Tap the “Search
network
forand enter
Device”
andnetwork the WIFI
button .
enter thepassword, network
WIFI network password .
password . If you want GREE+
If you want GREE+
to remember your check the box (optional).
to remember your network password, check the box (optional) .
Tap the to remember
“Search your network
for Device” button. password, check the box (optional) .
STEP 5. Tap the “Search for Device” button .
TapAPP.
the “Search for Device” button . WIFI Network Screen
NIT TO ThE GREE+
ADD YOUR GREE UNIT TO ThE GREE+ APP. WIFI Network Screen
h your WIFI network
GREE+ for Gree
will search units .
STEP
Step STEP
5: Add5. your WIFI network for Gree units .
5.your AC Pro unit to the GREE+ app.
ADD YOUR GREE WIFI Network Screen
GREE+
t is found, it will
When willYOUR
search
automatically
aADD
Gree unit isGREE beUNIT
your
found, WIFI TO
itregistered
UNITwillTO
ThE
network
ThEonGREE+
GREE+
automatically
APP.
forbeAC
APP.Pro units.
registered on WIFI Network Screen
When
al WIFI system .
the GREE+
GreeaGREE+
AC Pro
GREE+will
Universal will
will search
unit
display
WIFI your
is found,
system .
search WIFI
WIFI network
it will
theGREE+
your device for
display
network Gree
willautomatically
forthe
Gree units .
be registered on
device
units .
the
name
cf) of your WIFI
Gree(ex ., system. GREE+ will
AC5bcf) of your Gree unit .
unit . display the device
name (ex., When AC5bcf)
a Gree unitof your AC Pro
is found, unit.
it will automatically be registered on
When a Gree unit is found, it will automatically be registered on
STEP 6. the Gree Universal WIFI system . GREE+ will display the device
the Gree Universal WIFI system . GREE+ will display the device
RETURNING TO ThE(ex .,
name hOMEAC5bcf)
SCREEN.of your Gree unit .
E hOME SCREEN.name (ex ., AC5bcf) of your Gree unit .
Tap
Stepthe 6:
back “<” button
Return totothe
return
Hometo the Screen
My Home screen .
button toYour
return to the My Home screen .
STEP
Tap Gree
the unit
back 6.
will“<”
be button
displayedtoonreturn
the My Home
to thescreen .
My Home screen.
l be displayed onSTEP
the My 6.Home screen .
RETURNING
Your unit
RETURNING TO
will be displayedThE
TO and hOME
ThE“OFF”
on the
hOME SCREEN.
My Home screen.
SCREEN.
Turn
Turnyour
yourGree unit
unit
Tap the “ON”
“ON” and “OFF” by tapping
by thethethe
tapping
circleTap
it “ON” and “OFF”
circle by the back
backthe
tapping
button .
button.
“<”
“<” button
button to to return
return toto the My
My Home
Home screen .
screen . Registration Confirmation
Your
For a fullYour
Gree unit
Greedisplay,
screen
will be
unit will tap displayed
be displayed
the unit on
on the My Home screen .
the My Home screen .
display.
. Registration Confirmation Screen
For a full screen display, tap the Gree unit display . Screen
Turn
Turn your Gree
Gree unit
unit “ON”
“ON” and
and “OFF”
“OFF” by
by tapping
tapping the
isplay, tap the Gree unityour
display . the
circle button .
circle button . Registration Confirmation
Registration Confirmation
Screen
Screen
For
For aa full
full screen
screen display,
display, tap
tap the
the Gree
Gree unit
unit display .
display .
Unit “OFF” My Home Screen Unit “ON” My Home Screen Unit “ON” Full Screen
5 Unit “OFF” My Home Screen Unit “ON” My Home Screen Unit “ON” Full Screen
Unit “OFF” My Home Screen Unit “ON” My Home Screen Unit “ON” Full Screen
Unit “OFF” My Home Screen Unit “ON” My Home Screen Unit “ON” Full Screen
55
16
STARTUP AND
STARTUP ANDOPERATION
OPERATION
72
°F
17
STARTUP AND OPERATION
STARTUP AND OPERATION
OPERATING MODE
OPERATING
Select “Auto”,
OPERATING MODE
MODE
“Cool”, “Dry”, “Fan” or “Heat” by sliding the
mode icon
Select right“Cool”,
“Auto”, or left “Dry”,
on the “Fan”
smartphone display . The modes
“Fan” oror“Heat”
“Heat” by
bysliding thethe
Select “Auto”, “Cool”, “Dry”, sliding
68
°F
72
°F
72
°F
Temperature Setting
Temperature Setting
8
8
18
STARTUP AND OPERATION
STARTUP
FAhRENhEIT AND°COPERATION
°F/CELSIUS SCREEN
STARTUP AND OPERATION
FAHRENHEIT °F/CELSIUS
Initially, the GREE+ °Ctemperatures
app will display SCREEN in °F .
Initially, the GREE+
To switch app
the display willtap
to °C, display
the °F temperatures in °F.
icon on the smartphone
To switch
Screen . the display to °C,
Repeat the°F/CELSIUS tap
procedure to°C the
switch°Fthe display backsmartphone
icon on the to °F .
FAhRENhEIT SCREEN
Screen. Repeat the procedure to switch the display back to °F.
FAhRENhEIT °F/CELSIUS °C SCREEN
Initially, the GREE+ app will display temperatures in °F .
ToInitially, the display
switch the GREE+toapp°C,will
tapdisplay
the °F temperatures in °F .
icon on the smartphone
To switch
Screen . thethe
Repeat display to °C, to
procedure tapswitch
the °Fthe
icondisplay
on theback
smartphone
to °F .
Screen . Repeat the procedure to switch the display back to °F .
FAN MODES
Fahrenheit °F/Celcius °C Screen
Fan mode can be adjusted by sliding the fan icon right or left on the
smartphone screen . The fan modes will be displayed as follows:
FAN MODES
FAN MODES Fahrenheit °F/Celcius °C Screen
Fan Modes
Fan mode can be adjusted by sliding the fan icon right or left on the Fahrenheit °F/Celcius °C Screen
Fan modeFancan
mode
smartphone can be The
bescreen .
adjustedadjusted
fan by sliding
by modes
slidingwill
thethe fan icon
befan iconright
displayed as or left
follows:
right on the
or left on the
smartphone
smartphone
See Remotescreen.screen .
The
Controller The modes
fan fan modes
instructions willbe
will
for detailed be displayed asasfollows:
displayed
operation . follows:
9
19
SPECIAL FUNCTION GROUP
SPECIAL FUNCTION GROUP
OPEN
SPECIAL FUNCTION GROUP
SPECIAL FUNCTIONS
OPEN SPECIAL FUNCTIONS
OPEN
The SPECIAL
GREE+
The GREE+ app
appFUNCTIONS
has multiple specialspecial
has multiple functions to improveto
functions your
improve your
comfort,
The GREE+save
comfort, apptime
save has
timeand lowerlower
multiple
and energyenergy
special usage . usage.
functions Tap the “Function”
to improve
Tapyour
the “Function”
icon
icon save
comfort, toto open
open
time the the
lowerSpecial
andSpecial Function
Function
energy window .
usage . window.
Tap the “Function”
OPEN SPECIAL FUNCTIONS
icon to open the Special Function window .
The GREE+ app has multiple special functions to improve your
comfort, save time and lower energy usage . Tap the “Function”
icon to open the Special Function window .
Special Functions
VENTILATE
Special Functions
VENTILATE
This function is not included with your system .
This function is not included with your system .
Ventilate Special Functions
This VENTILATE
function is not included with your system.
This function is not included with your system .
X-FAN MODE
X-FAN
WhenMODE Ventilate Mode
operating in humid areas, the unit has a DRY COIl function
called X-Fan . This function will allow the indoor fan to run for a
SPECIAL FUNCTION GROUP
Ventilate Mode
When operating in humid areas, the unit has a DRY COIl function
pre-determined
called X-FAN MODE
X-Fan . This amount
functionofwill
timeallow
afterthe
theindoor
unit isfan
turned
to runofffor(cooling
a
or dry modes)
pre-determined
X-FAN MODE to ensure that additional moisture is removed
amount of time after the unit is turned off (cooling from Ventilate Mode
coil . When
Turn theoperating
X-Fan in humid
feature ON areas,
by the
tapping unit
the has a
“Function”DRY COIl function
or dry modes)
When operatingto ensure that additional
in humid areas,moisture
the unitis has removeda DRY fromCOIL function
button called
and X-Fan .
then the This function
“X-Fan” will allow
button . Tap the indoor
again to fan to
turn runOPEN
OFF . for a SPECIAL FUNCTIONS
coil . Turn
called the X-Fan
X-Fan. Thisfeature
function ON bywill
tapping
allowthethe “Function”
indoor fan to run for a
pre-determined amountofoftime
pre-determined time after the unitunit
is turned off (cooling
The
offGREE+ app has multiple special functions to improve your
button and then the amount“X-Fan” button .after the
Tap again to turnisOFF .
turned (cooling
or dry modes)
or dry modes) to ensure
to ensure thatadditional
that additional moisture
moisture is removed from from
comfort,
is removed save time and lower energy usage . Tap the “Function”
coil .the
coil. Turn Turn the X-Fan
X-Fan feature
feature onON bybytapping
tapping the the“Function”
“Function” icon to open the Special Function window .
buttonbutton
and then the “X-Fan”
and then the “X-Fan” button. Tap again
button . Tap again to turn OFF . to turn off.
X-Fan Mode
X-Fan Mode
VENTILATE
This function is not included with your system . X-Fan Mode
10
10
20
10
SPECIAL FUNCTION GROUP
SPECIAL FUNCTION
SPECIAL GROUP
FUNCTION GROUP
SPECIAL
UNIT DISPLAY FUNCTION
LIGhT ON/OFF GROUP
OPEN SPECIAL FUNCTIONS
The GREE+ app has multiple special functions to improve your
TurnDISPLAY
UNIT the indoor unitLIGHT
display ON by tapping the “Function”
ON/OFF
UNIT DISPLAY LIGhT ON/OFF comfort, save time and lower energy usage . Tap the “Function”
button and thenunit
Turn the indoor
the “light” on by button . Tap again to turn it back OFF .
Turn the indoordisplay tapping
unit display ON by tapping the “Function”
the “Function” icon to open the Special Function window .
UNIT DISPLAY
button LIGhT
andbutton
then thenON/OFF
andthe “Light”
the “light” button.
button . Taptoagain
Tap again to OFF .
turn it back turn it back off.
Turn the indoorUNIT DISPLAY
unit display ON byLIGhT
tappingON/OFF
the “Function”
button and then the “light”
Turn the indoor unitbutton .
displayTap
ONagain to turn
by tapping theit “Function”
back OFF .
button and then the “light” button . Tap again to turn it back OFF .
Unit Screen Control
Unit Screen OFF Unit Screen ON Unit Screen Control
Unit Screen OFF VENTILATE
Unit Screen ON
ENERGY SAVING MODE
SPECIAL This
FUNCTION GROUP Unit Screen Control
function is not included with your system .
Energy Saving mode will automatically select the optimal compressor
and fan speeds to allow for energy savings while operating in Cooling Unit Screen Control
ENERGY SAVING MODE
Unit Screen
or Heating OFF
modes . The compressor and fan will automatically slowUnit Screen ON
Unit Screen
down as the room temperature OFFthe set point . Turn the Energy
reaches Unit Screen ON
Energy Saving
ENERGY SAVINGmode will
MODE automatically select
Saving ON and OFF by tapping the “Function”
the optimal compressor
button and then
and fan
Energy speeds
Saving to$allow
mode
the “SE” for automatically
will
button . energy savings while selectoperating in Coolingcompressor
the optimal
OPENwhileSPECIAL FUNCTIONS
ENERGY
andorfanSAVING
Heating
speeds MODE
modes .
to The compressor
allow andsavings
for energy fan will automatically slow in Cooling
operating
ENERGY
or Heating modes. TheSAVING MODEand fan
compressor The will
GREE+ app has multiple
automatically special functions to improve
slow yourMode
Energy Saving
down as the room temperature reaches the set point . Turn the Energy
Energy as
down Saving mode will automatically select the optimal
comfort, compressor
save time and the
lowerEnergy
energy usage . Tap the “Function”
Saving the
ON and
FREEzE
room
Energy
OFF temperature
GUARDbySaving mode
tapping
(46°F
reaches
thewill
“Function”
hEATING)
the
automatically set
select point.
button theand Turn
optimal
then compressor
and fan speeds
Saving on and toand
allow
off by for energy
tapping savings
the while operating
“Function”
fan speeds to allow for energyicon in Cooling
button
to open
savings while and then
the Special
operating Function window .
in Cooling
the the
“SE” $ button .
“SE”$ Freeze
button.Guardcompressor
mode (or vacation
or Heating modes . The
or Heating andmode)
modes . The
will automatically
fan will automatically slow
maintain room temperature abovecompressor and fan
46°F . Turn Freeze GuardwillONautomatically slow
down as the room
and OFFtemperature
down as thethe
by tapping reaches
room the
temperature
“Function” set point .
reaches
button Turn the
thethe
and then X-FAN
Energy
set“46°F”
point .
°F
TurnMODE
the Energy Energy Saving Mode
Saving ON and OFF
heating by tapping
button . Freeze the “Function”
Guard can only be activated
Saving ON and OFF by tapping the “Function” button
in heatand
mode .then
button and then
When operating in humid areas, the unit has a DRY COIl function
the “SE” $ button .
the “SE” $ button .
FREEzE GUARD (46°F hEATING)
SPECIAL FUNCTION GROUP called X-Fan . This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
Energy SavingEnergy
ModeSaving Mode
Freeze Guard mode (or vacation mode) will automatically or dry modes) to ensure that additional moisture is removed from
maintain room temperature above 46°F . Turn VENTILATE
Freeze Guard ONcoil . Turn the X-Fan feature ON by Freezetapping theMode
Guard “Function”
FREEzE GUARD
and OFF byFREEzE
(46°F
tapping GUARD
the hEATING)
“Function”(46°F SPECIAL
OPEN hEATING)
buttonThis
andfunction button
then theis“46°F”
FUNCTIONS not and then
included
°F
withthe
your“X-Fan”
system . button . Tap again to turn OFF .
FREEZE GUARD (46°F Heating)
heating button . Freeze Guard can(or
only
The be activated
GREE+ app in heat mode .
willhas multiple special functions to improve your
12 Freeze Guard mode vacation mode) will automatically
Freeze Guard
Freeze Guard mode (or vacation
mode mode)
(or vacation will automatically
mode) automatically
maintain room
maintain room maintain room
temperature
temperature abovetemperature
comfort,
above
46°F . above
save
46°F.
Turn 46°F .
time
Turn
Freeze Turn
and
GuardFreeze
ONFreeze
lower Guard usage .
energy
Guard ON Tap the “Function”
on
and off by
and OFF bytapping andthe
tapping OFF
theby“Function”
tapping the
“Function” icon“Function”
buttontobutton
open
and button
thentheand and Function
then
theSpecial
“46°F”then
thethe“46°F”
°F
“46°F”
window .
°F
X-Fan Mode
13
VENTILATE
This function is not included with your system .
22 10
13
SPECIAL FUNCTION SPECIAL
GROUP FUNCTION GROUP
SPECIAL FUNCTION GROUP
SLEEP MODE
SLEEP MODE SETTINGS Sleep mode will automatically adjust room temperature during your
sleep time . This slight change in temperature will not affect your
SLEEP MODE
The Gree SETTINGS
unit contains between 1 to 4 different
comfort Sleep
level duemode
to the functions depending
natural effects onhas
that sleeping theonmodel .
the body,To select
SLEEP MODE
a Sleep
The Mode, tap the “Sleep”
GreeSETTINGS
unit contains betweentitle
1 tounder the
but itSleep
4 different icon
willSleep
save onmode to open depending
energyfunctions
consumptiontheandSleep
lowerSetting
your screen .
electric
on the bill . To select
model .
For more information, see Sleep Modes in the remote controller
a Sleep
The Gree unit Mode, tap
contains the “Sleep”
between 1 totitle
4 under the
different Sleep
Sleep
instructions . icon
Turnmode to open
ON andthe
functions
Sleep Mode OFFSleep Setting
depending
by tapping screen .
on the model. To
the “Function”
select a Sleep Mode, tap the “Sleep” title under
buttonthe Sleep
and then icon
the “Sleep” to open the Sleep Setting screen.
Button
Sleep Mod
From the Sleep Setting screen, you can select a desired sleep function . You can select the Expert, Nap,
From the Sleep Setting screen, you can select a desired sleep function. You can select the Expert,
Nap,Tradition
From the or
Tradition DIY
Sleep SleepSleep
functions
Setting
or DIY screen, by tapping
you bythe
can select
functions abuttons atsleep
desiredthe
tapping thebuttons
bottom ofatthe
function . You screen .
thecanbottom
select theofExpert, Nap,
the screen.
Tradition or DIY Sleep functions by tapping the buttons at the bottom of the screen .
15
16
16
23
SPECIAL FUNCTION GROUP
18
18
24
SPECIAL FUNCTION GROUP
ROUP
TIMER MODE
TIMER MODE
Timer modeTIMER
will automatically
MODEturn turn the unit ON or OFF on a selected day and time to save on energy consumption and
Timer mode will automatically the unit ON or OFF on a selected day and time to save on energy
lower your
consumption andelectric
lower bill .
your electric bill.
Timer mode will automatically turn the unit ON or OFF on a selected day and time to save on energy consumption and
ON or OFF on a selected day and time to savelower
on energy consumption
your electric bill . and
VENTILATE
This function is not included with your system .
Need
Need ImaGe
ImaGe Need
ImaGe
19
X-FAN MODE
19 When operating in humid areas, the unit has a DRY COIl function
called X-Fan . This function will allow the indoor fan to run for a
pre-determined amount of time after the unit is turned off (cooling
or dry modes) to ensure that additional moisture is removed from
coil . Turn the X-Fan feature ON by tapping the “Function”
button and then the “X-Fan” button . Tap again to turn OFF .
25
SPECIAL FUNCTION GROUP
In the Add Preset screen, the unit can be programmed to turn ON and OFF on specific days of the week and time of day .
In the Add Preset screen, the unit can be programmed to turn ON and OFF on specific days of the week
and timeInoftheday.
Add Preset screen, the unit can be programmed to turn ON and OFF on specific days of the week and time of day .
Select the specific days of the week the unit will turn ON or OFF by tapping the buttons at the bottom of the screen .
Select the specific days of the week the unit will turn ON or OFF by tapping the buttons at the bottom of
Select the specific days of the week the unit will turn ON or OFF by tapping the buttons at the bottom of the screen .
the screen.
20
20
26
SPECIAL FUNCTION GROUP
Select the specific time of day the unit will turn ON or OFF by scrolling the Hour and Minute screen UP and DOWN .
To have the unit turn ON at the programmed time, tap the “ON” button or tap the “OFF” button for the unit to turn OFF .
To have the unit turn ON at the programmed time, tap the “ON” button or tap the “OFF” button for the
unit to turn OFF.
To have the unit turn ON at the programmed time, tap the “ON” button or tap the “OFF” button for the unit to turn OFF .
Then tap the “Save” button to save the program and return to the Preset list screen .
Then tapThen
the tap the “Save”
“Save” button
button to savethe
to save theprogram
program and
andreturn to thetoPreset
return list screen .
the Preset List screen.
21
21
27
SPECIAL FUNCTION GROUP
SPECIAL FUNCTION GROUP
hUMIDIFY MODE hUMIDIFY MODE
HUMIDIFY MODE
hUMIDIFY
Humidify Humidify
mode MODE
willHumidify
mode willmode
automatically will control
automatically
automatically control control
thethe the humidity
humidity
humidity ininthe in the
theroom .
room. room .
Turn Turn
Humidify
Turn Humidify
Mode ON
Humidify Mode ON by
and OFF
Mode ON and OFF by tapping
tapping
and OFF by
tapping the the
“Function” “Function”
the “Function”
hUMIDIFY
Humidify MODE
mode button button
and
button and then
will automatically and
then then
thethe
control the the “Humidify”
“Humidify”
“Humidify”
humidity in thebutton . button .
button.
room . Turn Humidify Mode ON and OFF by tapping
the “Function” button and then the “Humidify” button .
Humidify mode will automatically control the humidity in the room . Turn Humidify Mode ON and OFF by tapping
the “Function” button and then the “Humidify” button .
hUMIDIFY
hUMIDIFY MODEhUMIDIFY
MODE
SETTING MODE Humidify Mode Screen
SETTING
HUMIDIFYhUMIDIFY
MODE SETTING
MODE SETTING
Humidify mode
To set a humidity
To set a humidity level, taplevel,
the tapwilltheautomatically
“Humidify” “Humidify” control
title undertitle thethe
theunder humidity
Humidify icon in the
Humidify toroom .
icon openTurn Humidify
to open
the Mode ONSetting
the Humidify
Humidify Setting and OFF by tapping
To set a humidity level,
screen . tapthethe
From “Function”
“Humidify”
thethe
Humidify button
title
Setting and
canthen
under
screen, the
youthe “Humidify”
aHumidify
can selecticon
a humidifybutton .
icon to open the Humidify Setting
Toscreen .
screen.hUMIDIFY
From
MODE
set a humidity
From the Humidify
thelevel,
Humidify
SETTING
tap Setting screen,
“Humidify” you
title under select
the humidify
Humidify tofunction .
function . You
opencan
Setting screen, you can select a humidify function. You can select the
You can
theselect theselect
Humidify the Intelligent,
Intelligent,
Setting
screen . Continuous,
Continuous,
From or Manual
the HumidifyorHumidifying
Manual
Setting Humidifying
screen, you functions
functions by
can selectbyathe
tapping tapping the
buttons
humidify atbuttons at the
the bottom
function . You ofbottom
can theat of the screen .
screen .
select the
Intelligent,
To Continuous, or Manual
set a humidity level, Humidifying
tap the “Humidify” functions
title under by tapping
the Humidify icon thetobuttons theIntelligent,
open the Humidify bottom
Setting of the
screen. Continuous, or Manual Humidifying functions by tapping the buttons at the bottom of the screen .
screen . From the Humidify Setting screen, you can select a humidify function . You can select the Intelligent,
Continuous, or Manual Humidifying functions by tapping the buttons at the bottom of the screen .
Intelligent
Intelligent
humidifying
humidifying
Intelligent
humidifying
Intelligent
humidifying
Humidify
Humidify Setting Setting Screen
Screen
hUMIDIFY MODE SETTING
Humidify Setting Screen
23 23
To set a humidity level,Humidify
tap theSetting
“Humidify”
Screentitle under the Humidify icon to open the Humidify Setting
23
screen . From the Humidify Setting screen, you can select a humidify function . You can select the Intelligent,
23 Continuous, or Manual Humidifying functions by tapping the buttons at the bottom of the screen .
28
SPECIAL FUNCTION GROUP
INTELLIGENT HUMIDIFYING
INTELLIGENT hUMIDIFYING
Intelligent
humidifying
CONTINUOUS HUMIDIFYING
CONTINUOUS hUMIDIFYING
Intelligent
humidifying
MANUAL hUMIDIFYING
Intelligent
humidifying
24
29
SPECIAL FUNCTION GROUP
Indoor Noise Mode Screen
by tapping the “Function” button and then the “Indoor Noise” button .
INDOOR NOISE MODE
Indoor Noise Mode will automatically control the unit noise in the room . Turn Indoor Noise Mode ON and OFF
by tapping the “Function” button and then the “Indoor Noise” button .
Indoor Noise
Indoor Noise
Intelligent
humidifying
25
25
30
SPECIAL FUNCTION GROUP
From the Indoor Noise Setting screen, the Indoor Noise Function can be turned ON and OFF by sliding
the ON/OFF
From button
the Indoorright
NoiseorSetting
left. With
screen,the
theIndoor Noise
Indoor Noise function
Function ON,
can be the ON
turned Indoor Noise
and OFF level can be set by
by sliding
sliding Noise Level scale to the desire level.
the ON/OFF button right or left . With the Indoor Noise function ON, the Indoor Noise level can be set by
sliding Noise level scale to the desire level .
31
SPECIAL FUNCTION GROUP
AREA FAN
AREA FAN SPECIAL FUNCTION hUMIDIFY
GROUPMODE
Area fan
Area fan mode allows youmode allows you tothe
to customize customize
unit themode
Humidify unitinairflow
airflow will
the in the room
automatically
room to greater
control
to greater the overall
humidity
overall comfort . Turn
in the room .
comfort. Turn Area
Turn
Area Humidify Mode ON
AREA
Fan Noise FAN
Mode Fan and
ON NoiseOFF
ModebyONtapping
and OFF bythetapping the
“Function” “Function”
the “Function” button button
and and
then then
thethe “Area
“Area
button and then the “Humidify” Fan”
Fan”button . button .
button.
Area fan mode allows you to customize the unit airflow in the room to greater overall comfort . Turn Area
Fan Noise Mode ON and OFF by tapping the “Function” button and then the “Area Fan” button .
AREA FAN
Area fan mode allows you to customize the unit airflow in the room to greater overall comfort . Turn Area
Fan Noise Mode ON and OFF by tapping the “Function” button and then the “Area Fan” button .
Intelligent
humidifying
AREA FAN
27 SETTING Area Fan Setting Screen
To customize the indoor air flow, tap the “Area Fan” title under the Area Fan icon to
open the Area Fan Setting display .
32 27
SPECIAL FUNCTION GROUP
SPECIAL FUNCTION GROUP
First, turn Area Fan ON by sliding the “Area Fan” button on the right and a person icon will appear
on the screen.
First, turn Area Fan ON by sliding the “Area Fan” button on the right and a person icon will appear
on theturn
First, screen .
Area Fan ON by sliding the “Area Fan” button on the right and a person icon will appear
on the screen .
Next, configure the room airflow sliding the person icon to the approximate main living area in the
room .
Next,the
Next, configure
Then, slideairflow
configure
roomthe
theroom
unitairflow right the
slidingsliding
or left
the person
to the
person approximate
icon
icon to the
to the
mounting location
approximate
approximate mainonliving
main
the wall .
livingarea
area inThis
the
in the
will direct
room. Then, room .
slide Then,unit
the unit airflow
slideright to
the unitthe specific area
or left to right in the room .
or left to the approximate
the approximate mounting mounting location
location on the
on the wall .
wall. ThisThiswill direct
unit airflow to
willthe specific
direct area
unit airflow to in
thethe room.
specific area in the room .
To avoid unit airflow directly at the main living area in the room, slide the “No BlOW Person” button to
the right .unit
To avoid Thisairflow
will direct the airflow
directly around
at the main thearea
living specific
in thearea .
room, slide the “No BlOW Person” button to
To avoid unit airflow directly at the main living area in the room, slide the “No BLOW Person” button to
thewill
the right. This right .direct
This will
thedirect the airflow
airflow around around
the the specificarea.
specific area .
Tap the Back “<” button to return to the full screen .
Tap the Back “<” button to return to the full screen. will direct unit airflow to the specific area in the room.
Tap the Back “<” button to return to the full screen .
28
28
33