Professional Documents
Culture Documents
2015 Power Sections Catalog PDF
2015 Power Sections Catalog PDF
Sections
www.nov.com/PowerSections
http://www.nov.com/Segments/Wellbore_Technologies/Downhole/Power_Section/Power_Sections.aspx
TABLE OF CONTENTS
NOV Power Sections Catalog
REV. 00
TABLE OF CONTENTS
Introduction.................................................................................................................................................................................... Page 3
Global Facility Footprint................................................................................................................................................................. Page 4
Elastomer Overview........................................................................................................................................................................ Page 5
Fit Overview .................................................................................................................................................................................... Page 7
How to Read Spec sheets................................................................................................................................................................ Page 8
Conventional cover....................................................................................................................................................................... Page 14
Spec Sheets - Conventional (Imperial)......................................................................................................................................... Page 15
ERT - Cover.................................................................................................................................................................................. Page 213
ERT Operational Guidelines...................................................................................................................................................... Page 214
- Introduction ...................................................................................................................................................................... Page 214
- ERT Fit Recommendations .............................................................................................................................................. Page 214
- Relationship between ERT Operational Loading and Stator Durability......................................................................... Page 216
- Adjusting ERT Differential Pressure for Operational Temperature................................................................................. Page 217
- How to Translate Loading Factors to Pressures and Flows............................................................................................. Page 218
ERT Operational Temperature Range By OD Size...................................................................................................................... Page 220
Spec Sheets – ERT (Imperial)...................................................................................................................................................... Page 238
Spec Sheets – ERT (Metric).......................................................................................................................................................... Page 256
INTRODUCTION
NOV is the world’s largest supplier of power sections, and we have the most diverse portfolio of power section products in the
industry. We offer all speed ranges for 1-11/16” to 11¼” diameter powers sections and we have manufacturing and reline facilities
around the globe to quickly provide the tools you need, when and where you need them.
Our power section products are available for sale from our manufacturing facilities, or for rental from an NOV service facility. The
offering of products at the facilities near you is always evolving, and we can assist you with any questions about any new items that
are available. Please contact your NOV account representative for more details.
(Future Reline facility) 8018 Breen Drive Zone Industrial De Petit Rechain ICAD 2 Plots 6AR17 & 7AR17 Number 4 Gul Way
610 15th Avenue Houston, Texas 77064 Avenue Mercury 3 Mussafah Industrial Area Jurong, Singapore 629192
Nisku, Alberta T9E 8A3 USA Chaineux, B-4650 Abu Dhabi, UAE 65-6303-9601
Canada 281-854-1000 Belgium +971 (0) 2-657-5612 New and Reline Stators
780-955-7311 New & Reline Stators 32-87-313875 New and Reline Stators RR, PRR, POB
New & Reline Stators RR, PRR, POB New and Reline Stators RR, PRR, POB
RR, UF114, PRR, POB New Rotors UF100D, UF114, UF180, 280XT, POB
New Rotors
10586 Highway 75 North
Willis, Texas 77378
USA
936-890-1064
New & Reline Stators
UF100D, UF114, UF180, 280XT, POB
New Rotors
ELASTOMER OPTIONS
NOV Power Sections Catalog
REV. 00
ELASTOMER OVERVIEW
280XT
PRR POB
1.5
UF114
1.25
UF100D, RR UF180
1
Standard Best
Fluid Compatibility
NBR Elastomer HNBR Elastomer ERT
ERT and ERTcr stators feature a uniform elastomer thickness with contoured steel lobes to provide the highest torque potential.
These stators are available with any of our premium or performance elastomers.
ERTcr stators allow you to match a stator to an existing rotor configuration. By matching the ERTcr to a rotor that’s already in your
fleet, you gain the benefits of our highest performing product without the need to purchase additional components.
Rotor Coatings
Rotors are commonly coated with chrome or tungsten carbide.
Tungsten Carbide – high-temperature spray application that results in uniform thickness across the lobes
- Impervious to mud effects
- Longer service between coatings
- Abrasion tolerant
NOTE: Rotor profiles are machined specifically for their intended coatings. Changing the coating
also changes the intended rotor profile, which may reduce the overall power section performance.
FIT OVERVIEW
When evaluating fit, the main Relevant Environmental factors to consider are:
• Run Temperature
• Operational fit
• Fluid compatibility
• Wear during run
Interference fit between a power section rotor and stator is calculated as:
Next, FIT% is used to normalize the target compression across stator sizes and elastomers. FIT% is calculated:
FITin
FIT% =
Trubber
Where : Truvbber is the stator minor ID minus the nominal tube ID, all measured to thousandths of an inch.
RTOavg - STA m
FIT% =
STA m - TUBE id
The most basic version of fit analysis only takes into account temperature. For more complex applications swell due to fluids and
elastomer wear must be taken into consideration. Target FIT% by elastomer are included in the chart below.
280XT wears differently than other elastomers. Please contact NOV engineering support for assistance with 280XT fits.
Please see ERT fit recommendations on page 214 for additional information on fitting ERT power sections.
Scope
This document will cover the guidelines for interpretation of the technical information charts and graphs included in the spec
sheets for the conventional configurations
6,000 0.060
5,000 0.050
Fit Increase (in)
Torque (ft-lbs)
4,000 0.040
3,000 0.030
2,000 0.020
1,000 0.010
0 0.000
0 500 1,000 1,500 2,000 2,500 0 50 100 150 200 250
250 250
275 GPM 275 GPM
Mechanical Power (hp)
200 200
Speed (rpm)
185 GPM
150 150
185 GPM
100 100
100 GPM
50 50
100 GPM
0 0
0 500 1,000 1,500 2,000 2,500 0 500 1,000 1,500 2,000 2,500
2/24/2015
Rotor Specifications
The Rotor Specifications include the following:
• Overall length
• Avg. Diameter
Rotor Specifications
• Contour Length Overall Length 229.4 in.
Avg. Diameter 2.503 in.
• Eccentricity Contour Length 222.2 in.
Eccentricity 0.207 in.
• Major Diameter Major Diameter 2.916 in.
Head Diameter 3.125 in.
• Head Diameter Head Length 7.25 in.
Weight 323 lbs
• Head Length Thread Form 2 3/8" HEF
• Weight
• Thread Form
Stator Specifications
The Stator Specifications include the following:
• Overall Length
Stator Specifications
• Tube OD Overall Length 242.6 in.
Tube OD 4.75 in.
• Contour Length Contour Length 223.6 in.
Tube ID 3.750 in.
• Tube ID Rubber Cut-back
Side 1: 8.0 in.
• Rubber Cutback Length (Side1 and Side 2) Side 2: 11.0 in.
Weight 501 lbs
• Weight Material Alloy Steel
• Tube Material
Performance Specifications
Performance Specifications
Flow Range 100-275 GPM
Rev per Unit Volume 0.95 Rev/Gal
Speed Range 95-262 RPM
No Load Pressure Loss 95 psi
RR-UF100D-UF180 UF114 POB-PRR 280XT
Max ∆ Pressure 1,141 psi 1,426 psi 1,712 psi 1,883 psi
Max Torque 3,294 ft-lbs 4,118 ft-lbs 4,942 ft-lbs 5,436 ft-lbs
Stall ∆ Pressure 1,825 psi 2,282 psi 2,738 psi 3,012 psi
Stall Torque 5,270 ft-lbs 6,589 ft-lbs 7,906 ft-lbs 8,697 ft-lbs
• Speed Range
The table will show the available FIT information by Rubber and Location
FIT = ROT AVERAGE DIAMETER (see Rotor Specifications) - Minor Diameter (Sizes T through 8)
To find the Fit for the POB rubber using the 7 sizes (2OS for Breen and 2.5OS from Willis)
Rotor Ave Dia = 2.503”
Stator Minor available from Breen = 2.551”
A. Torque Charts
Each line color represents the maximum differential pressure and the corresponding Torque values.
To Read Torque: Select a differential pressure on the x-axis and move vertically to the torque line (as long as it is equal or less than
the Max rec. ∆P for the corresponding Rubber). Then move horizontally to the secondary y-axis on the right of the graph and read
the torque output.
In this the chart above we selected a 1000psi ∆P, the corresponding Torque value for all the rubber compounds is 2,900ft.lbs
The chart above will reflect the adjustment needed to correct the operational fit due to change in temperatures above 70°F. In this
case the fit was for 220°F Operational Fit.
To read the Fit Increase: Select the ∆T on the x- axis and move vertically to the corresponding rubber line (POB in this case – the
dotted Blue and Red Line). Then move horizontally to the Y –and read the Fit increase value (0.031”).
From the previous example in section 7 the POB fit will be corrected as follows.
From the table above the Breen POB FIT for size 7 was -0.049” (Loose)
So size 7 from Breen with POB will have a corrected fit of -0.018”
So size 7 (2.5OS) from Willis with POB will have a corrected fit of -0.020”
C. Performance Curves
To Read Speed (RPM): Select the differential pressure on the x-axis and move vertically to the speed line corresponding to the flow
rate being used. Then move horizontally to the primary y-axis on the left and read the rotor’s speed at that pressure and flow.
In this case at 1500psi ∆P, the corresponding RPM for POB at 275GPM equals 245 rpm
To determine the Horse Power: Selected ∆P on the x- axis and move vertically to the corresponding rubber Type /GPM. Then move
horizontally to the Y –axis and read the horse power value. In this case at 1000psi ∆P, the corresponding power for POB at GPM3
equals 135HP.
www.nov.com/PowerSections
Power Section Specification (Imperial Units) 475-2380
475-2380
4.75”2:3
4.75" 2:3Lobes
Lobes88Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 243.0 in. Overall Length 255.0 in. Flow Range 100-260 GPM
Avg. Diameter 2.257 in. Tube OD 4.75 in. Rev per Unit Volume 2.49 Rev/Gal
Contour Length 237.0 in. Contour Length 239.0 in. Speed Range 248-646 RPM
Eccentricity 0.241 in. Tube ID 3.750 in. No Load Pressure Loss 103 psi
Major Diameter 2.738 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 963 psi - psi 1,445 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 1,138 ft-lbs - ft-lbs 1,708 ft-lbs - ft-lbs
Weight 174 lbs Weight 555 lbs Stall Pressure 1,540 psi - psi 2,311 psi - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,820 ft-lbs - ft-lbs 2,732 ft-lbs - ft-lbs
Stator Minors and Fit (in.) at 70 F o
0.060
2,000
0.050
Fit Increase (in)
Torque (ft-lbs)
1,500
0.040
0.030
1,000
0.020
500
0.010
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800 0 50 100 150 200 250
500
Speed (rpm)
150
400 180 GPM
50
100 100 GPM
0 0
0 500 1,000 1,500 2,000 0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 15
Power Section Specification (Imperial Units) 475-4511
475-4511
4.75” 4:5
4.75" 4:5Lobes
Lobes1.1
1.1 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 39.6 in. Overall Length 41.0 in. Flow Range 100-275 GPM
Avg. Diameter 2.420 in. Tube OD 4.75 in. Rev per Unit Volume 1.02 Rev/Gal
Contour Length 33.4 in. Contour Length 32.5 in. Speed Range 102-281 RPM
Eccentricity 0.246 in. Tube ID 3.8 in. No Load Pressure Loss 86 psi
Major Diameter 2.912 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 4.3 in. Max Pressure 78 psi - psi 117 psi - psi
Head Length 6.24 in. Side 2: 4.3 in. Max Torque 215 ft-lbs - ft-lbs 322 ft-lbs - ft-lbs
Weight 56 lbs Weight 84 lbs Stall Pressure 124 psi - psi 187 psi - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 341 ft-lbs - ft-lbs 515 ft-lbs - ft-lbs
o
Fit Details (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.426 -0.006 2.427 -0.007
1
2
3
4 OS 2.453 -0.033 2.45 -0.030
5
6
7
8
Reline Lengths (in.) Breen: Max 40 Min 38 Willis: Max - Min - Alternate Stator OD: 5 in.
Torque (ft-lbs) versus Differential Pressure Fit Increase (in.) versus Change in Temperature
450 0.180
400 0.160
350 0.140
300 0.120
250 0.100
200 0.080
150 0.060
100 0.040
50 0.020
0 0.000
0 20 40 60 80 100 120 140 160 0 50 100 150 200 250
RPM (Rev/Min) versus Differential Pressure Mechanical Horsepower (HP) versus Differential Pressure
300 18
275 GPM
16
275 GPM
250
14
200 12
185 GPM 10
150 185 GPM
8
100 6
100 GPM
4
50 100 GPM
2
0 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
12/17/2014
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 16
Power Section Specification (Imperial Units) 475-4535
475-4535
4.75” 4:5
4.75" 4:5Lobes
Lobes3.5
3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 107.0 in. Overall Length 116.0 in. Flow Range 100-275 GPM
Avg. Diameter 2.420 in. Tube OD 4.75 in. Rev per Unit Volume 1.03 Rev/Gal
Contour Length 101.0 in. Contour Length 100.0 in. Speed Range 102-282 RPM
Eccentricity 0.246 in. Tube ID 3.750 in. No Load Pressure Loss 104 psi
Major Diameter 2.912 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 403 psi 504 psi 605 psi 665 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 1,106 ft-lbs 1,382 ft-lbs 1,659 ft-lbs 1,825 ft-lbs
Weight 147 lbs Weight 238 lbs Stall Pressure 644 psi 806 psi 967 psi 1,063 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,767 ft-lbs 2,212 ft-lbs 2,654 ft-lbs 2,917 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 2.404 0.016 2.390 0.030 2.399 0.021 2.386 0.034
0 S OS 2.425 -0.005 2.432 -0.012 2.417 0.003 2.427 -0.007 2.425 -0.005 2.415 0.005
1
2
3
4
5
6
7 2-OS 3-OS 2.470 -0.050 2.491 -0.071 2.482 -0.062 2.470 -0.050 2.481 -0.061 2.476 -0.056
8
Reline Lengths (in.) Breen: Max 122 Min 108 Willis: Max 122 Min 104 Alternate Stator OD: 5 in.
0.070
2,000
0.060
Fit Increase (in)
Torque (ft-lbs)
0.050
1,500
0.040
1,000
0.030
0.020
500
0.010
0 0.000
0 100 200 300 400 500 600 700 800 0 50 100 150 200 250
90
275 GPM 275 GPM
250
80
Mechanical Power (hp)
70
200
Speed (rpm)
60
185 GPM
150 50
185 GPM
40
100
100 GPM 30
20
50
100 GPM
10
0 0
0 200 400 600 800 1,000 0 100 200 300 400 500 600 700 800 900
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 17
Power Section Specification (Imperial Units) 475-4560
475-4560
4.75”4:5
4.75" 4:5Lobes
Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 179.0 in. Overall Length 187.0 in. Flow Range 100-275 GPM
Avg. Diameter 2.420 in. Tube OD 4.75 in. Rev per Unit Volume 1.03 Rev/Gal
Contour Length 173.0 in. Contour Length 171.0 in. Speed Range 102-282 RPM
Eccentricity 0.246 in. Tube ID 3.750 in. No Load Pressure Loss 87 psi
Major Diameter 2.912 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 780 psi 975 psi 1,170 psi 1,287 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 2,137 ft-lbs 2,671 ft-lbs 3,205 ft-lbs 3,526 ft-lbs
Weight 245 lbs Weight 385 lbs Stall Pressure 1,248 psi 1,560 psi 1,872 psi 2,059 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,419 ft-lbs 4,274 ft-lbs 5,129 ft-lbs 5,641 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 2.403 0.017 2.391 0.029 2.399 0.021 2.384 0.036
0 S OS 2.436 -0.016 2.427 -0.007 2.417 0.003 2.433 -0.013 2.425 -0.005 2.411 0.009
1
2
3
4 OS 2.443 -0.023 2.443 -0.023
5
6
7 2-OS 2-OS 2.467 -0.047 2.459 -0.039 2.450 -0.030 2.465 -0.045 2.452 -0.032 2.445 -0.025
8
Reline Lengths (in.) Breen: Max 187 Min 173 Willis: Max 187 Min 175 Alternate Stator OD: 5 in.
3,500 0.070
3,000 0.060
Fit Increase (in)
Torque (ft-lbs)
2,500 0.050
2,000 0.040
1,500 0.030
1,000 0.020
500 0.010
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 0 50 100 150 200 250
180
275 GPM
250 275 GPM
160
Mechanical Power (hp)
140
200
Speed (rpm)
120
185 GPM
150 100
185 GPM
80
100
100 GPM 60
40
50
100 GPM
20
0 0
0 200 400 600 800 1,000 1,200 1,400 1,600 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 18
Power Section Specification (Imperial Units) 475-4563
475-4563
4.75” 4:5
4.75" 4:5Lobes
Lobes6.3
6.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 188.0 in. Overall Length 207.6 in. Flow Range 100-275 GPM
Avg. Diameter 2.420 in. Tube OD 4.75 in. Rev per Unit Volume 1.03 Rev/Gal
Contour Length 182.0 in. Contour Length 180.0 in. Speed Range 103-284 RPM
Eccentricity 0.246 in. Tube ID 3.750 in. No Load Pressure Loss 87 psi
Major Diameter 2.912 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 11.0 in. Max Pressure 825 psi 1,031 psi 1,238 psi 1,361 psi
Head Length 6.00 in. Side 2: 16.6 in. Max Torque 2,248 ft-lbs 2,811 ft-lbs 3,373 ft-lbs 3,710 ft-lbs
Weight 258 lbs Weight 425 lbs Stall Pressure 1,320 psi 1,650 psi 1,980 psi 2,178 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,598 ft-lbs 4,497 ft-lbs 5,397 ft-lbs 5,936 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 2.394 0.026 2.381 0.039 2.392 0.028 2.379 0.041
0 S OS 2.432 -0.012 2.425 -0.005 2.416 0.004 2.429 -0.009 2.416 0.004 2.410 0.010
1
2
3
4 OS 2-OS 2.450 -0.030 2.457 -0.037 2.445 -0.025 2.447 -0.027 2.448 -0.028 2.437 -0.017
5
6
7 2-OS 3-OS 2.466 -0.046 2.492 -0.072 2.478 -0.058 2.460 -0.040 2.480 -0.060 2.476 -0.056
8
Reline Lengths (in.) Breen: Max 207 Min 193 Willis: Max 207.6 Min 195.6 Alternate Stator OD: 5 in.
4,000 0.070
3,500
0.060
3,000
Fit Increase (in)
Torque (ft-lbs)
0.050
2,500
0.040
2,000
0.030
1,500
0.020
1,000
500 0.010
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 0 50 100 150 200 250
275 GPM
250
200
Mechanical Power (hp)
275 GPM
200
Speed (rpm)
150
185 GPM
150
100
185 GPM
100
100 GPM
50
50
100 GPM
0 0
0 500 1,000 1,500 2,000 0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 19
Power Section Specification (Imperial Units) 475-5630
475-5630
4.75”5:6
4.75" 5:6Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 84.5 in. Overall Length 91.6 in. Flow Range 100-275 GPM
Avg. Diameter 2.612 in. Tube OD 4.75 in. Rev per Unit Volume 1.22 Rev/Gal
Contour Length 78.5 in. Contour Length 75.6 in. Speed Range 121-334 RPM
Eccentricity 0.196 in. Tube ID 3.750 in. No Load Pressure Loss 107 psi
Major Diameter 3.004 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 345 psi 431 psi 518 psi 569 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 782 ft-lbs 978 ft-lbs 1,174 ft-lbs 1,291 ft-lbs
Weight 105 lbs Weight 190 lbs Stall Pressure 552 psi 690 psi 828 psi 910 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,252 ft-lbs 1,565 ft-lbs 1,879 ft-lbs 2,065 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.602 0.010 2.584 0.028 2.590 0.022 2.579 0.033
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 91.6 Min 79.6 Alternate Stator OD: 5 in.
1,400
0.060
1,200
0.050
Fit Increase (in)
Torque (ft-lbs)
1,000
0.040
800
0.030
600
0.020
400
200 0.010
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
350 80
275 GPM
70
Mechanical Power (hp)
60
250
Speed (rpm)
50
200 185 GPM
40
185 GPM
150
30
50 10 100 GPM
0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 20
Power Section Specification (Imperial Units) 475-5645
475-5645
4.75” 5:6
4.75" 5:6Lobes
Lobes4.5
4.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 107.0 in. Overall Length 122.0 in. Flow Range 100-200 GPM
Avg. Diameter 2.504 in. Tube OD 4.75 in. Rev per Unit Volume 1.73 Rev/Gal
Contour Length 101.0 in. Contour Length 106.0 in. Speed Range 173-346 RPM
Eccentricity 0.162 in. Tube ID 3.750 in. No Load Pressure Loss 110 psi
Major Diameter 2.828 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 606 psi - psi 909 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 965 ft-lbs - ft-lbs 1,447 ft-lbs - ft-lbs
Weight 116 lbs Weight 258 lbs Stall Pressure 969 psi - psi 1,454 psi - psi
Thread Form 62C0001 Material Alloy Steel Stall Torque 1,543 ft-lbs - ft-lbs 2,315 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.511 -0.007 2.511 -0.007
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 122 Min 110 Willis: Max - Min - Alternate Stator OD: 5 in.
1,600
0.050
1,400
1,200 0.040
Fit Increase (in)
Torque (ft-lbs)
1,000
0.030
800
600 0.020
400
0.010
200
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
200 GPM
90
350
200 GPM 80
Mechanical Power (hp)
300
70
250
Speed (rpm)
40
150 100 GPM
30 100 GPM
100
20
50
10
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 21
Power Section Specification (Imperial Units) 475-5660
475-5660
4.75”5:6
4.75" 5:6Lobes
Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 178.0 in. Overall Length 187.0 in. Flow Range 100-250 GPM
Avg. Diameter 2.532 in. Tube OD 4.75 in. Rev per Unit Volume 0.80 Rev/Gal
Contour Length 172.0 in. Contour Length 171.0 in. Speed Range 79-199 RPM
Eccentricity 0.211 in. Tube ID 3.750 in. No Load Pressure Loss 89 psi
Major Diameter 2.954 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 757 psi - psi 1,136 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 2,610 ft-lbs - ft-lbs 3,915 ft-lbs - ft-lbs
Weight 260 lbs Weight 385 lbs Stall Pressure 1,211 psi - psi 1,816 psi - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,175 ft-lbs - ft-lbs 6,261 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1
2
3
4
5
6
7 2-OS 2.577 -0.045 2.577 -0.045
8
Reline Lengths (in.) Breen: Max 187 Min 175 Willis: Max - Min - Alternate Stator OD: 5 in.
4,500
0.050
4,000
3,500
0.040
Fit Increase (in)
Torque (ft-lbs)
3,000
2,500 0.030
2,000
0.020
1,500
1,000
0.010
500
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 0 50 100 150 200 250
250 GPM
140
200
Mechanical Power (hp)
120
250 GPM
100
Speed (rpm)
150
100
60
100 GPM 40
50 100 GPM
20
0 0
0 200 400 600 800 1,000 1,200 1,400 1,600 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 22
Power Section Specification (Imperial Units) 475-5683
475-5683
4.75” 5:6
4.75" 5:6Lobes
Lobes8.3
8.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 229.4 in. Overall Length 242.6 in. Flow Range 100-275 GPM
Avg. Diameter 2.503 in. Tube OD 4.75 in. Rev per Unit Volume 0.95 Rev/Gal
Contour Length 222.2 in. Contour Length 223.6 in. Speed Range 95-262 RPM
Eccentricity 0.207 in. Tube ID 3.750 in. No Load Pressure Loss 95 psi
Major Diameter 2.916 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.125 in. Side 1: 8.0 in. Max Pressure 1,141 psi 1,426 psi 1,712 psi 1,883 psi
Head Length 7.25 in. Side 2: 11.0 in. Max Torque 3,294 ft-lbs 4,118 ft-lbs 4,942 ft-lbs 5,436 ft-lbs
Weight 323 lbs Weight 501 lbs Stall Pressure 1,825 psi 2,282 psi 2,738 psi 3,012 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,270 ft-lbs 6,589 ft-lbs 7,906 ft-lbs 8,697 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 2.476 0.027 2.469 0.034 2.473 0.030 2.464 0.039
0 S 2.506 -0.003 2.502 0.001
1
2 OS 2.506 -0.003 2.496 0.006 2.500 0.002 2.493 0.010
3
4 OS 1.5-OS 2.525 -0.023 2.526 -0.023 2.515 -0.013 2.523 -0.021 2.519 -0.017 2.514 -0.011
5
6 2-OS 2.541 -0.039 2.530 -0.027 2.539 -0.037 2.525 -0.023
7 2-OS 2.5-OS 2.556 -0.054 2.558 -0.055 2.543 -0.041 2.551 -0.049 2.554 -0.051 2.544 -0.042
8 3-OS 2.576 -0.074 2.562 -0.059 2.580 -0.078 2.561 -0.059
Reline Lengths (in.) Breen: Max 242.6 Min 230.6 Willis: Max 242.6 Min 230.6 Alternate Stator OD: 5 in.
6,000 0.060
5,000 0.050
Fit Increase (in)
Torque (ft-lbs)
4,000 0.040
3,000 0.030
2,000 0.020
1,000 0.010
0 0.000
0 500 1,000 1,500 2,000 2,500 0 50 100 150 200 250
250 250
275 GPM 275 GPM
Mechanical Power (hp)
200 200
Speed (rpm)
185 GPM
150 150
185 GPM
100 100
100 GPM
50 50
100 GPM
0 0
0 500 1,000 1,500 2,000 2,500 0 500 1,000 1,500 2,000 2,500
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 23
Power Section Specification (Imperial Units) 475-7820 (A)
475-7820 (A)
4.75”7:8
4.75" 7:8Lobes
Lobes22Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 172.5 in. Overall Length 180.0 in. Flow Range 100-250 GPM
Avg. Diameter 2.473 in. Tube OD 4.75 in. Rev per Unit Volume 0.30 Rev/Gal
Contour Length 166.5 in. Contour Length 164.0 in. Speed Range 29-74 RPM
Eccentricity 0.163 in. Tube ID 3.750 in. No Load Pressure Loss 115 psi
Major Diameter 2.798 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.825 in. Side 1: 8.0 in. Max Pressure 212 psi - psi 318 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 1,866 ft-lbs - ft-lbs 2,799 ft-lbs - ft-lbs
Weight 234 lbs Weight 375 lbs Stall Pressure 339 psi - psi 508 psi - psi
Thread Form 62C0001 Material Alloy Steel Stall Torque 2,983 ft-lbs - ft-lbs 4,471 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.500 -0.027 2.496 -0.023
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 180 Min 166 Willis: Max Min Alternate Stator OD: 5 in.
3,000
0.050
2,500
0.040
Fit Increase (in)
Torque (ft-lbs)
2,000
0.030
1,500
0.020
1,000
0.010
500
0 0.000
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250
70 40
250 GPM 250 GPM
35
Mechanical Power (hp)
60
30
50
Speed (rpm)
175 GPM
25
40 175 GPM
20
30
100 GPM 15
20
10
100 GPM
10 5
0 0
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 24
Power Section Specification (Imperial Units) 475-7820 (B)
475-7820 (B)
4.75”7:8
4.75" 7:8Lobes
Lobes22Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 149.0 in. Overall Length 158.0 in. Flow Range 100-275 GPM
Avg. Diameter 2.688 in. Tube OD 4.75 in. Rev per Unit Volume 0.33 Rev/Gal
Contour Length 143.0 in. Contour Length 142.0 in. Speed Range 32-89 RPM
Eccentricity 0.168 in. Tube ID 3.750 in. No Load Pressure Loss 113 psi
Major Diameter 3.024 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 214 psi 268 psi 321 psi 353 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 1,732 ft-lbs 2,165 ft-lbs 2,598 ft-lbs 2,858 ft-lbs
Weight 242 lbs Weight 323 lbs Stall Pressure 342 psi 428 psi 513 psi 564 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,768 ft-lbs 3,464 ft-lbs 4,153 ft-lbs 4,566 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.674 0.014 2.665 0.023 2.670 0.018 2.662 0.026
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max Min Willis: Max 159 Min 147 Alternate Stator OD: 5 in.
3,000
0.050
2,500
0.040
Fit Increase (in)
Torque (ft-lbs)
2,000
0.030
1,500
0.020
1,000
0.010
500
0 0.000
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250
90 45
275 GPM
80 275 GPM
40
Mechanical Power (hp)
70 35
Speed (rpm)
60 30
185 GPM
50 25
185 GPM
40 20
30 15
100 GPM
20 10
100 GPM
10 5
0 0
0 100 200 300 400 500 0 50 100 150 200 250 300 350 400 450
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 25
Power Section Specification (Imperial Units) 475-7820 (C)
475-7820 (C)
4.75”7:8
4.75" 7:8Lobes
Lobes22Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 51.5 in. Overall Length 64.5 in. Flow Range 100-275 GPM
Avg. Diameter 2.729 in. Tube OD 4.75 in. Rev per Unit Volume 1.02 Rev/Gal
Contour Length 46.5 in. Contour Length 46.5 in. Speed Range 102-280 RPM
Eccentricity 0.169 in. Tube ID 3.750 in. No Load Pressure Loss 140 psi
Major Diameter 3.067 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 13.0 in. Max Pressure 188 psi 235 psi 282 psi 310 psi
Head Length 5.00 in. Side 2: 5.0 in. Max Torque 485 ft-lbs 606 ft-lbs 728 ft-lbs 800 ft-lbs
Weight 85 lbs Weight 129 lbs Stall Pressure 300 psi 376 psi 451 psi 496 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 774 ft-lbs 970 ft-lbs 1,164 ft-lbs 1,280 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.703 0.026 2.695 0.034 2.700 0.029 2.688 0.041
1
2
3
4 OS 2.731 -0.002 2.723 0.006 2.724 0.005 2.718 0.011
5
6
7
8
Reline Lengths (in.) Breen: Max Min Willis: Max 64.5 Min 52.5 Alternate Stator OD: 5 in.
800
0.050
700
600 0.040
Fit Increase (in)
Torque (ft-lbs)
500
0.030
400
300 0.020
200
0.010
100
0 0.000
0 50 100 150 200 250 300 350 0 50 100 150 200 250
40
275 GPM
250 275 GPM
35
Mechanical Power (hp)
200 30
Speed (rpm)
185 GPM 25
150
20 185 GPM
100 15
100 GPM
10
50
5 100 GPM
0 0
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 26
Power Section Specification (Imperial Units) 475-7822 (A)
475-7822 (A)
4.75” 7:8
4.75" 7:8Lobes
Lobes2.2
2.2 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 107.0 in. Overall Length 116.0 in. Flow Range 100-275 GPM
Avg. Diameter 2.607 in. Tube OD 4.75 in. Rev per Unit Volume 0.55 Rev/Gal
Contour Length 101.0 in. Contour Length 100.0 in. Speed Range 55-152 RPM
Eccentricity 0.164 in. Tube ID 3.750 in. No Load Pressure Loss 122 psi
Major Diameter 2.936 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 242 psi - psi 363 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 1,151 ft-lbs - ft-lbs 1,727 ft-lbs - ft-lbs
Weight 168 lbs Weight 237 lbs Stall Pressure 387 psi - psi 580 psi - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,841 ft-lbs - ft-lbs 2,760 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.611 -0.004 2.606 0.001
1
2
3
4
5
6
7 2-OS 2.650 -0.043 2.650 -0.043
8
Reline Lengths (in.) Breen: Max 122 Min 108 Willis: Max Min Alternate Stator OD: 5 in.
0.050
2,000
0.040
Fit Increase (in)
Torque (ft-lbs)
1,500
0.030
1,000
0.020
500
0.010
0 0.000
0 50 100 150 200 250 300 350 400 450 0 50 100 150 200 250
120
40
100
Speed (rpm)
185 GPM
80 30
185 GPM
60
20
100 GPM
40
10
20 100 GPM
0 0
0 100 200 300 400 500 0 50 100 150 200 250 300 350 400 450
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 27
Power Section Specification (Imperial Units) 475-7822 (B)
475-7822 (B)
4.75” 7:8
4.75" 7:8Lobes
Lobes2.2
2.2 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 107.0 in. Overall Length 116.0 in. Flow Range 100-275 GPM
Avg. Diameter 2.607 in. Tube OD 4.75 in. Rev per Unit Volume 0.55 Rev/Gal
Contour Length 101.0 in. Contour Length 100.0 in. Speed Range 55-152 RPM
Eccentricity 0.164 in. Tube ID 3.750 in. No Load Pressure Loss 122 psi
Major Diameter 2.936 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 242 psi 303 psi 363 psi 399 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 1,151 ft-lbs 1,439 ft-lbs 1,727 ft-lbs 1,900 ft-lbs
Weight 168 lbs Weight 237 lbs Stall Pressure 387 psi 484 psi 580 psi 638 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,841 ft-lbs 2,303 ft-lbs 2,760 ft-lbs 3,036 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.585 0.022 2.567 0.040 2.581 0.026 2.563 0.044
1
2
3
4 OS 2.598 0.009 2.588 0.019 2.597 0.010 2.588 0.019
5
6
7 2-OS 2.622 -0.015 2.606 0.001 2.619 -0.012 2.604 0.003
8
Reline Lengths (in.) Breen: Max Min Willis: Max 123 Min 105 Alternate Stator OD: 5 in.
0.060
2,000
0.050
Fit Increase (in)
Torque (ft-lbs)
1,500
0.040
0.030
1,000
0.020
500
0.010
0 0.000
0 50 100 150 200 250 300 350 400 450 0 50 100 150 200 250
120
40
100
Speed (rpm)
185 GPM
80 30
185 GPM
60
20
100 GPM
40
10
20 100 GPM
0 0
0 100 200 300 400 500 0 100 200 300 400 500
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 28
Power Section Specification (Imperial Units) 475-7826
475-7826
4.75” 7:8
4.75" 7:8Lobes
Lobes2.6
2.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 220.0 in. Overall Length 229.3 in. Flow Range 100-300 GPM
Avg. Diameter 2.748 in. Tube OD 4.75 in. Rev per Unit Volume 0.25 Rev/Gal
Contour Length 214.3 in. Contour Length 213.3 in. Speed Range 25-76 RPM
Eccentricity 0.175 in. Tube ID 4.000 in. No Load Pressure Loss 110 psi
Major Diameter 3.097 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 324 psi 405 psi 486 psi 535 psi
Head Length 5.70 in. Side 2: 8.0 in. Max Torque 3,359 ft-lbs 4,199 ft-lbs 5,038 ft-lbs 5,542 ft-lbs
Weight 370 lbs Weight 381 lbs Stall Pressure 518 psi 648 psi 777 psi 855 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,370 ft-lbs 6,718 ft-lbs 8,055 ft-lbs 8,864 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 2.756 -0.008 2.753 -0.005 2.740 0.008 2.750 -0.002 2.750 -0.002 2.739 0.009
1
2
3
4 OS OS 2.782 -0.034 2.768 -0.020 2.754 -0.006 2.791 -0.043 2.760 -0.012 2.754 -0.006
5
6
7
8
Reline Lengths (in.) Breen: Max Min Willis: Max 237 Min 217 Alternate Stator OD: 5 in.
6,000 0.060
5,000 0.050
Fit Increase (in)
Torque (ft-lbs)
4,000 0.040
3,000 0.030
2,000 0.020
1,000 0.010
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
80 80
300 GPM
70 70
Mechanical Power (hp)
300 GPM
60 60
Speed (rpm)
50 50
200 GPM
40 40 200 GPM
30 30
20 100 GPM 20
10 10 100 GPM
0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 29
Power Section Specification (Imperial Units) 475-7829
475-7829
4.75” 7:8
4.75" 7:8Lobes
Lobes2.9
2.9 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 242.0 in. Overall Length 250.0 in. Flow Range 100-250 GPM
Avg. Diameter 2.473 in. Tube OD 4.75 in. Rev per Unit Volume 0.31 Rev/Gal
Contour Length 236.5 in. Contour Length 234.0 in. Speed Range 31-77 RPM
Eccentricity 0.163 in. Tube ID 3.750 in. No Load Pressure Loss 119 psi
Major Diameter 2.798 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.000 in. Side 1: 8.0 in. Max Pressure 348 psi - psi 522 psi - psi
Head Length 5.50 in. Side 2: 8.0 in. Max Torque 2,940 ft-lbs - ft-lbs 4,410 ft-lbs - ft-lbs
Weight 329 lbs Weight 524 lbs Stall Pressure 556 psi - psi 835 psi - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,698 ft-lbs - ft-lbs 7,055 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 2.466 0.007 2.461 0.012
0 S OS 2.486 -0.013 2.492 -0.019 2.483 -0.010 2.487 -0.014
1
2
3
4 OS 2.504 -0.031 2.497 -0.024
5
6
7 2-OS 2.516 -0.043 2.513 -0.040
8
Reline Lengths (in.) Breen: Max 250.1 Min 238.1 Willis: Max 250 Min 238 Alternate Stator OD: 5 in.
0.070
5,000
0.060
4,000
Fit Increase (in)
Torque (ft-lbs)
0.050
3,000 0.040
0.030
2,000
0.020
1,000
0.010
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
80 250 GPM
60
70 250 GPM
Mechanical Power (hp)
50
60
Speed (rpm)
50 40
175 GPM
175 GPM
40
30
30
100 GPM 20
20
100 GPM
10
10
0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 30
Power Section Specification (Imperial Units) 475-7830
475-7830
4.75”7:8
4.75" 7:8Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 113.0 in. Overall Length 122.6 in. Flow Range 100-275 GPM
Avg. Diameter 2.672 in. Tube OD 4.75 in. Rev per Unit Volume 0.66 Rev/Gal
Contour Length 107.0 in. Contour Length 105.6 in. Speed Range 65-180 RPM
Eccentricity 0.172 in. Tube ID 3.875 in. No Load Pressure Loss 115 psi
Major Diameter 3.016 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.5 in. Max Pressure 372 psi 465 psi 558 psi 614 psi
Head Length 6.00 in. Side 2: 8.5 in. Max Torque 1,489 ft-lbs 1,862 ft-lbs 2,234 ft-lbs 2,458 ft-lbs
Weight 192 lbs Weight 228 lbs Stall Pressure 595 psi 744 psi 892 psi 982 psi
Thread Form 1 7/8"-4 SA Material Alloy Steel Stall Torque 2,382 ft-lbs 2,979 ft-lbs 3,572 ft-lbs 3,932 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.688 -0.016 2.664 0.008 2.678 -0.006 2.663 0.009
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max Min Willis: Max 123 Min 110.6 Alternate Stator OD: 5 in.
0.060
2,500
0.050
2,000
Fit Increase (in)
Torque (ft-lbs)
0.040
1,500
0.030
1,000
0.020
500
0.010
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
180 80
275 GPM 275 GPM
160
70
Mechanical Power (hp)
140
60
Speed (rpm)
120
185 GPM 50
100
40 185 GPM
80
30
60
100 GPM
40 20
10 100 GPM
20
0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 31
Power Section Specification (Imperial Units) 475-7831
475-7831
4.75” 7:8
4.75" 7:8Lobes
Lobes3.1
3.1 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 229.0 in. Overall Length 238.0 in. Flow Range 100-275 GPM
Avg. Diameter 2.688 in. Tube OD 4.75 in. Rev per Unit Volume 0.33 Rev/Gal
Contour Length 223.0 in. Contour Length 222.0 in. Speed Range 32-89 RPM
Eccentricity 0.168 in. Tube ID 3.750 in. No Load Pressure Loss 113 psi
Major Diameter 3.024 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 399 psi 499 psi 599 psi 658 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 3,230 ft-lbs 4,037 ft-lbs 4,845 ft-lbs 5,329 ft-lbs
Weight 371 lbs Weight 487 lbs Stall Pressure 638 psi 798 psi 957 psi 1,053 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,165 ft-lbs 6,460 ft-lbs 7,747 ft-lbs 8,524 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.676 0.012 2.668 0.020 2.663 0.025 2.665 0.023
1
2
3
4 OS 2.699 -0.011 2.695 -0.007 2.693 -0.005 2.691 -0.003
5
6
7
8
Reline Lengths (in.) Breen: Max Min Willis: Max 238 Min 226 Alternate Stator OD: 5 in.
5,000 0.050
4,000 0.040
Fit Increase (in)
Torque (ft-lbs)
3,000 0.030
2,000 0.020
1,000 0.010
0 0.000
0 100 200 300 400 500 600 700 800 0 50 100 150 200 250
90 90
70 70
Speed (rpm)
60 60
185 GPM
50 50
40 185 GPM
40
30 30
100 GPM
20 20
10 10 100 GPM
0 0
0 200 400 600 800 1,000 0 100 200 300 400 500 600 700 800 900
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 32
Power Section Specification (Imperial Units) 475-7838
475-7838
4.75” 7:8
4.75" 7:8Lobes
Lobes3.8
3.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 178.0 in. Overall Length 187.0 in. Flow Range 100-275 GPM
Avg. Diameter 2.607 in. Tube OD 4.75 in. Rev per Unit Volume 0.55 Rev/Gal
Contour Length 172.0 in. Contour Length 171.0 in. Speed Range 55-152 RPM
Eccentricity 0.164 in. Tube ID 3.750 in. No Load Pressure Loss 147 psi
Major Diameter 2.936 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 476 psi 595 psi 714 psi 785 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 2,260 ft-lbs 2,825 ft-lbs 3,390 ft-lbs 3,729 ft-lbs
Weight 275 lbs Weight 385 lbs Stall Pressure 761 psi 952 psi 1,142 psi 1,256 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,614 ft-lbs 4,521 ft-lbs 5,423 ft-lbs 5,964 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 2.587 0.020 2.577 0.030 2.586 0.021 2.569 0.038
0 S OS 2.615 -0.008 2.615 -0.008 2.607 0.000 2.612 -0.005 2.606 0.001 2.603 0.004
1
2
3
4 OS 2-OS 2.638 -0.031 2.640 -0.033 2.631 -0.024 2.636 -0.029 2.632 -0.025 2.631 -0.024
5
6
7 2-OS 2.649 -0.042 2.650 -0.043
8
Reline Lengths (in.) Breen: Max 198 Min 175 Willis: Max 198 Min 175 Alternate Stator OD: 5 in.
4,000
0.060
3,500
0.050
3,000
Fit Increase (in)
Torque (ft-lbs)
2,500 0.040
2,000 0.030
1,500
0.020
1,000
0.010
500
0 0.000
0 100 200 300 400 500 600 700 800 900 0 50 100 150 200 250
160
100
140 275 GPM
Mechanical Power (hp)
275 GPM
120 80
Speed (rpm)
100
185 GPM 60
80
185 GPM
60 40
100 GPM
40
20
20 100 GPM
0 0
0 200 400 600 800 1,000 0 200 400 600 800 1,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 33
Power Section Specification (Imperial Units) 475-7850 (A)
475-7850 (A)
4.75”7:8
4.75" 7:8Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 186.0 in. Overall Length 194.0 in. Flow Range 100-275 GPM
Avg. Diameter 2.699 in. Tube OD 4.75 in. Rev per Unit Volume 0.62 Rev/Gal
Contour Length 180.0 in. Contour Length 178.0 in. Speed Range 62-170 RPM
Eccentricity 0.171 in. Tube ID 3.750 in. No Load Pressure Loss 110 psi
Major Diameter 3.041 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 701 psi 876 psi 1,052 psi 1,157 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 2,977 ft-lbs 3,721 ft-lbs 4,465 ft-lbs 4,912 ft-lbs
Weight 312 lbs Weight 395 lbs Stall Pressure 1,121 psi 1,402 psi 1,682 psi 1,850 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,761 ft-lbs 5,954 ft-lbs 7,143 ft-lbs 7,857 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.688 0.011 2.678 0.021 2.684 0.015 2.677 0.022
1
2
3
4 OS 2.724 -0.025 2.713 -0.014 2.719 -0.020 2.710 -0.011
5
6
7
8
Reline Lengths (in.) Breen: Max Min Willis: Max 200 Min 182 Alternate Stator OD: 5 in.
5,000 0.050
4,000 0.040
Fit Increase (in)
Torque (ft-lbs)
3,000 0.030
2,000 0.020
1,000 0.010
0 0.000
0 200 400 600 800 1,000 1,200 1,400 0 50 100 150 200 250
140
Mechanical Power (hp)
120
120
100
Speed (rpm)
60
60
100 GPM
40
40
20 100 GPM
20
0 0
0 200 400 600 800 1,000 1,200 1,400 1,600 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 34
Power Section Specification (Imperial Units) 475-34110
475-34110
4.75”3:4
4.75" 3:4Lobes
Lobes11
11Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 202.0 in. Overall Length 208.0 in. Flow Range 100-275 GPM
Avg. Diameter 2.257 in. Tube OD 4.75 in. Rev per Unit Volume 2.02 Rev/Gal
Contour Length 197.0 in. Contour Length 196.0 in. Speed Range 201-554 RPM
Eccentricity 0.279 in. Tube ID 3.750 in. No Load Pressure Loss 82 psi
Major Diameter 2.815 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 6.0 in. Max Pressure 1,437 psi 1,796 psi 2,156 psi 2,371 psi
Head Length 5.00 in. Side 2: 6.0 in. Max Torque 2,052 ft-lbs 2,566 ft-lbs 3,079 ft-lbs 3,387 ft-lbs
Weight 235 lbs Weight 433 lbs Stall Pressure 2,299 psi 2,874 psi 3,448 psi 3,793 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,284 ft-lbs 4,105 ft-lbs 4,925 ft-lbs 5,418 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.229 0.027 2.218 0.039 2.234 0.023 2.211 0.046
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 208 Min 196 Alternate Stator OD: 5 in.
3,500 0.080
0.070
3,000
0.060
Fit Increase (in)
Torque (ft-lbs)
2,500
0.050
2,000
0.040
1,500
0.030
1,000
0.020
500 0.010
0 0.000
0 500 1,000 1,500 2,000 2,500 3,000 0 50 100 150 200 250
350
500 275 GPM
275 GPM
Mechanical Power (hp)
300
400
250
Speed (rpm)
185 GPM
300 200
185 GPM
150
200
100 GPM
100
100
50 100 GPM
0 0
0 500 1,000 1,500 2,000 2,500 3,000 0 500 1,000 1,500 2,000 2,500 3,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 35
Power Section Specification (Imperial Units) 475-34140
475-34140
4.75”3:4
4.75" 3:4Lobes
Lobes14
14Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 229.0 in. Overall Length 238.0 in. Flow Range 80-275 GPM
Avg. Diameter 2.257 in. Tube OD 4.75 in. Rev per Unit Volume 2.26 Rev/Gal
Contour Length 223.0 in. Contour Length 222.0 in. Speed Range 180-620 RPM
Eccentricity 0.279 in. Tube ID 3.750 in. No Load Pressure Loss 82 psi
Major Diameter 2.815 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 1,852 psi 2,315 psi 2,778 psi 3,056 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 2,362 ft-lbs 2,952 ft-lbs 3,543 ft-lbs 3,897 ft-lbs
Weight 266 lbs Weight 495 lbs Stall Pressure 2,963 psi 3,704 psi 4,444 psi 4,889 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,779 ft-lbs 4,724 ft-lbs 5,668 ft-lbs 6,236 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1 S 2.230 0.027 2.222 0.035 2.232 0.024 2.211 0.046
2
3
4
5
6
7 2-OS 2.309 -0.053 2.298 -0.042 2.308 -0.051 2.289 -0.033
8
Reline Lengths (in.) Breen: Max Min Willis: Max 238 Min 226 Alternate Stator OD: 5 in.
4,000 0.080
3,500 0.070
3,000 0.060
Fit Increase (in)
Torque (ft-lbs)
2,500 0.050
2,000 0.040
1,500 0.030
1,000 0.020
500 0.010
0 0.000
0 500 1,000 1,500 2,000 2,500 3,000 3,500 0 50 100 150 200 250
450
600
275 GPM 400 275 GPM
Mechanical Power (hp)
500 350
Speed (rpm)
300
400
185 GPM
250
300 185 GPM
200
200 150
80 GPM 100
100
50
80 GPM
0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 36
Power Section Specification (Imperial Units) 475-91040
475-91040
4.75”9:10
4.75" 9:10Lobes
Lobes44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 151.1 in. Overall Length 159.0 in. Flow Range 100-250 GPM
Avg. Diameter 2.671 in. Tube OD 4.75 in. Rev per Unit Volume 0.56 Rev/Gal
Contour Length 145.1 in. Contour Length 143.0 in. Speed Range 56-140 RPM
Eccentricity 0.137 in. Tube ID 3.750 in. No Load Pressure Loss 148 psi
Major Diameter 2.945 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.900 in. Side 1: 8.0 in. Max Pressure 566 psi 708 psi 849 psi 934 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 2,526 ft-lbs 3,157 ft-lbs 3,789 ft-lbs 4,168 ft-lbs
Weight 236 lbs Weight 327 lbs Stall Pressure 905 psi 1,132 psi 1,358 psi 1,494 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,039 ft-lbs 5,052 ft-lbs 6,060 ft-lbs 6,667 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.690 -0.019 2.682 -0.011 2.688 -0.017 2.678 -0.007
1
2
3
4 OS 2.700 -0.029 2.696 -0.025 2.701 -0.030 2.687 -0.016
5
6
7
8
Reline Lengths (in.) Breen: Max Min Willis: Max 159 Min 147 Alternate Stator OD: 5 in.
4,500
0.050
4,000
3,500
0.040
Fit Increase (in)
Torque (ft-lbs)
3,000
2,500 0.030
2,000
0.020
1,500
1,000
0.010
500
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
140
100 250 GPM
250 GPM
Mechanical Power (hp)
120
80
100
Speed (rpm)
175 GPM
80 60
175 GPM
60
40
100 GPM
40
20 100 GPM
20
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 37
Power Section Specification (Imperial Units) 500-2390
500-2390
5”
5" 2:3 Lobes 99 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 243.0 in. Overall Length 250.0 in. Flow Range 150-350 GPM
Avg. Diameter 2.970 in. Tube OD 5 in. Rev per Unit Volume 3.28 Rev/Gal
Contour Length 237.0 in. Contour Length 234.0 in. Speed Range 492-1148 RPM
Eccentricity 0.128 in. Tube ID 4.000 in. No Load Pressure Loss 181 psi
Major Diameter 3.226 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.880 in. Side 1: 8.0 in. Max Pressure 1,016 psi - psi 1,524 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 910 ft-lbs - ft-lbs 1,365 ft-lbs - ft-lbs
Weight 365 lbs Weight 561 lbs Stall Pressure 1,625 psi - psi 2,438 psi - psi
Thread Form 1 7/8" SA Material Alloy Steel Stall Torque 1,455 ft-lbs - ft-lbs 2,184 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.985 -0.015 2.986 -0.016
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 250 Min 238 Willis: Max - Min - Alternate Stator OD: - in.
1,600
0.100
1,400
1,200 0.080
Fit Increase (in)
Torque (ft-lbs)
1,000
0.060
800
600 0.040
400
0.020
200
0 0.000
0 500 1,000 1,500 2,000 0 50 100 150 200 250
1,200 300
350 GPM
Mechanical Power (hp)
350 GPM
1,000 250
Speed (rpm)
800 200
250 GPM
250 GPM
600 150
150 GPM
200 50
0 0
0 500 1,000 1,500 2,000 0 500 1,000 1,500 2,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 38
Power Section Specification (Imperial Units) 500-5640
500-5640
5”
5" 5:6 Lobes 44 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 135.5 in. Overall Length 140.0 in. Flow Range 100-250 GPM
Avg. Diameter 2.403 in. Tube OD 5 in. Rev per Unit Volume 1.03 Rev/Gal
Contour Length 128.0 in. Contour Length 124.0 in. Speed Range 103-258 RPM
Eccentricity 0.218 in. Tube ID 3.750 in. No Load Pressure Loss 197 psi
Major Diameter 2.838 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.840 in. Side 1: 8.0 in. Max Pressure 414 psi - psi 621 psi - psi
Head Length 7.50 in. Side 2: 8.0 in. Max Torque 1,104 ft-lbs - ft-lbs 1,656 ft-lbs - ft-lbs
Weight 177 lbs Weight 340 lbs Stall Pressure 662 psi - psi 993 psi - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,766 ft-lbs - ft-lbs 2,649 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.397 0.006 2.397 0.006
1
2
3
4
5 OS 2.409 -0.006 2.409 -0.006
6
7
8
Reline Lengths (in.) Breen: Max 140 Min 133 Willis: Max - Min - Alternate Stator OD: 4.75 in.
0.060
2,000
0.050
Fit Increase (in)
Torque (ft-lbs)
1,500
0.040
0.030
1,000
0.020
500
0.010
0 0.000
0 100 200 300 400 500 600 700 800 0 50 100 150 200 250
80 250 GPM
250
250 GPM 70
Mechanical Power (hp)
200 60
Speed (rpm)
175 GPM 50
150 175 GPM
40
100 30
100 GPM
20
50 100 GPM
10
0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 39
Power Section Specification (Imperial Units) 500-6760
500-6760
5”
5" 6:7 Lobes 66 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 179.5 in. Overall Length 185.0 in. Flow Range 200-350 GPM
Avg. Diameter 2.647 in. Tube OD 5 in. Rev per Unit Volume 1.03 Rev/Gal
Contour Length 173.5 in. Contour Length 169.0 in. Speed Range 205-360 RPM
Eccentricity 0.191 in. Tube ID 4.000 in. No Load Pressure Loss 290 psi
Major Diameter 3.029 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 659 psi - psi 989 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 1,727 ft-lbs - ft-lbs 2,590 ft-lbs - ft-lbs
Weight 278 lbs Weight 446 lbs Stall Pressure 1,054 psi - psi 1,581 psi - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,762 ft-lbs - ft-lbs 4,143 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T US 2.630 0.017 2.630 0.017
0 S 2.649 -0.002 2.647 0.000
1
2
3
4
5
6
7 2-OS 2.704 -0.057 2.700 -0.053
8
Reline Lengths (in.) Breen: Max 185 Min 171 Willis: Max - Min - Alternate Stator OD: - in.
3,000
0.100
2,500
0.080
Fit Increase (in)
Torque (ft-lbs)
2,000
0.060
1,500
0.040
1,000
0.020
500
0 0.000
0 200 400 600 800 1,000 1,200 1,400 0 50 100 150 200 250
300
120
250 275 GPM 275 GPM
Speed (rpm)
100
200
200 GPM 80
150 200 GPM
60
100
40
50 20
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 40
Power Section Specification (Imperial Units) 500-6770
500-6770
5”
5" 6:7 Lobes 77 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 205.0 in. Overall Length 212.0 in. Flow Range 200-350 GPM
Avg. Diameter 2.635 in. Tube OD 5 in. Rev per Unit Volume 0.80 Rev/Gal
Contour Length 199.0 in. Contour Length 196.0 in. Speed Range 160-281 RPM
Eccentricity 0.192 in. Tube ID 4.000 in. No Load Pressure Loss 149 psi
Major Diameter 3.018 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.900 in. Side 1: 8.0 in. Max Pressure 950 psi - psi 1,425 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 3,182 ft-lbs - ft-lbs 4,773 ft-lbs - ft-lbs
Weight 319 lbs Weight 471 lbs Stall Pressure 1,520 psi - psi 2,280 psi - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,091 ft-lbs - ft-lbs 7,637 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.651 -0.016 2.646 -0.011
1
2
3
4
5
6 OS 2.673 -0.038 2.673 -0.038
7
8
Reline Lengths (in.) Breen: Max 212 Min 200 Willis: Max Min Alternate Stator OD: 4.75 in.
5,000 0.050
4,000 0.040
Fit Increase (in)
Torque (ft-lbs)
3,000 0.030
2,000 0.020
1,000 0.010
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800 0 50 100 150 200 250
350 GPM
250 250 350 GPM
Mechanical Power (hp)
275 GPM
150 150
200 GPM
50 50
0 0
0 500 1,000 1,500 2,000 0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 41
Power Section Specification (Imperial Units) 500-6780
500-6780
5”
5" 6:7 Lobes 88 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 241.0 in. Overall Length 246.0 in. Flow Range 150-350 GPM
Avg. Diameter 2.635 in. Tube OD 5 in. Rev per Unit Volume 0.81 Rev/Gal
Contour Length 235.0 in. Contour Length 231.0 in. Speed Range 121-282 RPM
Eccentricity 0.192 in. Tube ID 4.000 in. No Load Pressure Loss 133 psi
Major Diameter 3.018 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.900 in. Side 1: 7.5 in. Max Pressure 1,165 psi 1,456 psi 1,748 psi 1,922 psi
Head Length 6.00 in. Side 2: 7.5 in. Max Torque 3,893 ft-lbs 4,866 ft-lbs 5,840 ft-lbs 6,424 ft-lbs
Weight 377 lbs Weight 546 lbs Stall Pressure 1,864 psi 2,330 psi 2,796 psi 3,075 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 6,229 ft-lbs 7,786 ft-lbs 9,344 ft-lbs 10,276 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 2.633 0.002 2.620 0.015 2.621 0.014 2.616 0.019
0 S 2.651 -0.016 2.645 -0.010
1
2
3
4 OS 2-OS 2.662 -0.027 2.667 -0.032 2.656 -0.021 2.658 -0.023 2.658 -0.023 2.655 -0.020
5
6 2-OS 2.679 -0.044 2.673 -0.038
7
8
Reline Lengths (in.) Breen: Max 250.1 Min 237.7 Willis: Max 250 Min 234 Alternate Stator OD: in.
7,000 0.070
6,000 0.060
Fit Increase (in)
Torque (ft-lbs)
5,000 0.050
4,000 0.040
3,000 0.030
2,000 0.020
1,000 0.010
0 0.000
0 500 1,000 1,500 2,000 2,500 0 50 100 150 200 250
250
200
Speed (rpm)
250 GPM
200
150 250 GPM
150
150 GPM
50
50
0 0
0 500 1,000 1,500 2,000 2,500 0 500 1,000 1,500 2,000 2,500
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 42
Power Section Specification (Imperial Units) 500-7850 (B)
500-7850 (B)
5”
5" 7:8 Lobes 55 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 186.0 in. Overall Length 198.0 in. Flow Range 100-300 GPM
Avg. Diameter 2.703 in. Tube OD 5 in. Rev per Unit Volume 0.68 Rev/Gal
Contour Length 180.0 in. Contour Length 182.0 in. Speed Range 68-205 RPM
Eccentricity 0.169 in. Tube ID 3.750 in. No Load Pressure Loss 117 psi
Major Diameter 3.041 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Pressure 843 psi 1,054 psi 1,265 psi 1,391 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 3,248 ft-lbs 4,060 ft-lbs 4,872 ft-lbs 5,359 ft-lbs
Weight 312 lbs Weight 511 lbs Stall Pressure 1,348 psi 1,686 psi 2,023 psi 2,225 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,194 ft-lbs 6,496 ft-lbs 7,795 ft-lbs 8,573 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.714 -0.011 2.702 0.001 2.705 -0.002 2.698 0.005
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 188 Min 198 Alternate Stator OD: 4.75 in.
6,000
0.050
5,000
0.040
Fit Increase (in)
Torque (ft-lbs)
4,000
0.030
3,000
0.020
2,000
0.010
1,000
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 0 50 100 150 200 250
200 200
Mechanical Power (hp)
150 150
200 GPM
50 100 GPM 50
100 GPM
0 0
0 500 1,000 1,500 2,000 0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 43
Power Section Specification (Imperial Units) 625-4543
625-4543
6.25” 4:5
6.25" 4:5Lobes
Lobes4.3
4.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 117.0 in. Overall Length 124.0 in. Flow Range 150-400 GPM
Avg. Diameter 3.220 in. Tube OD 6.25 in. Rev per Unit Volume 0.66 Rev/Gal
Contour Length 110.0 in. Contour Length 108.0 in. Speed Range 98-262 RPM
Eccentricity 0.326 in. Tube ID 5.000 in. No Load Pressure Loss 95 psi
Major Diameter 3.872 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.500 in. Side 1: 8.0 in. Max Pressure 528 psi 660 psi 792 psi 871 psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 2,269 ft-lbs 2,836 ft-lbs 3,404 ft-lbs 3,744 ft-lbs
Weight 282 lbs Weight 423 lbs Stall Pressure 844 psi 1,056 psi 1,267 psi 1,393 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 3,627 ft-lbs 4,538 ft-lbs 5,445 ft-lbs 5,987 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.195 0.025 3.185 0.035 3.198 0.022 3.178 0.042
1
2
3
4 OS 3.234 -0.014 3.235 -0.015 3.235 -0.015 3.227 -0.007
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 124 Min 112 Alternate Stator OD: 6.5 in.
4,000 0.090
0.080
3,500
0.070
3,000
Fit Increase (in)
Torque (ft-lbs)
0.060
2,500
0.050
2,000
0.040
1,500
0.030
1,000
0.020
500 0.010
0 0.000
0 200 400 600 800 1,000 0 50 100 150 200 250
180
250 400 GPM
400 GPM 160
Mechanical Power (hp)
140
200
Speed (rpm)
120
275 GPM
150 100
275 GPM
80
100
60
150 GPM
40
50
150 GPM
20
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 44
Power Section Specification (Imperial Units) 625-4575
625-4575
6.25” 4:5
6.25" 4:5Lobes
Lobes7.5
7.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 196.5 in. Overall Length 203.5 in. Flow Range 150-400 GPM
Avg. Diameter 3.220 in. Tube OD 6.25 in. Rev per Unit Volume 0.66 Rev/Gal
Contour Length 189.5 in. Contour Length 187.5 in. Speed Range 98-263 RPM
Eccentricity 0.326 in. Tube ID 5.000 in. No Load Pressure Loss 96 psi
Major Diameter 3.872 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.500 in. Side 1: 8.0 in. Max Pressure 988 psi 1,235 psi 1,482 psi 1,630 psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 4,232 ft-lbs 5,290 ft-lbs 6,348 ft-lbs 6,983 ft-lbs
Weight 472 lbs Weight 698 lbs Stall Pressure 1,580 psi 1,976 psi 2,371 psi 2,608 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 6,768 ft-lbs 8,465 ft-lbs 10,157 ft-lbs 11,172 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 3.198 0.022 3.185 0.035 3.195 0.025 3.174 0.046
0 S 3.215 0.005 3.210 0.010
1
2
3
4 OS 3.241 -0.021 3.231 -0.011 3.237 -0.017 3.221 -0.001
5
6
7
8
Reline Lengths (in.) Breen: Max 203.5 Min 191.5 Willis: Max 203.5 Min 191.5 Alternate Stator OD: 6.5 in.
0.090
7,000
0.080
6,000
0.070
Fit Increase (in)
Torque (ft-lbs)
5,000
0.060
4,000 0.050
0.040
3,000
0.030
2,000
0.020
1,000
0.010
0 0.000
0 500 1,000 1,500 2,000 0 50 100 150 200 250
250
200
Speed (rpm)
200
275 GPM
150 275 GPM
150
100
150 GPM 100
50 150 GPM
50
0 0
0 500 1,000 1,500 2,000 0 500 1,000 1,500 2,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 45
Power Section Specification (Imperial Units) 625-5645
625-5645
6.25” 5:6
6.25" 5:6Lobes
Lobes4.5
4.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 197.0 in. Overall Length 130.0 in. Flow Range 100-400 GPM
Avg. Diameter 3.329 in. Tube OD 6.25 in. Rev per Unit Volume 0.68 Rev/Gal
Contour Length 189.5 in. Contour Length 114.0 in. Speed Range 68-273 RPM
Eccentricity 0.282 in. Tube ID 5.000 in. No Load Pressure Loss 156 psi
Major Diameter 3.893 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.500 in. Side 1: 8.0 in. Max Pressure 568 psi - psi 852 psi - psi
Head Length 7.50 in. Side 2: 8.0 in. Max Torque 2,287 ft-lbs - ft-lbs 3,431 ft-lbs - ft-lbs
Weight 488 lbs Weight 420 lbs Stall Pressure 908 psi - psi 1,363 psi - psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 3,657 ft-lbs - ft-lbs 5,489 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.331 -0.002 3.332 -0.003
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 130 Min 118 Willis: Max - Min - Alternate Stator OD: 6.5 in.
4,000 0.070
3,500
0.060
3,000
Fit Increase (in)
Torque (ft-lbs)
0.050
2,500
0.040
2,000
0.030
1,500
0.020
1,000
500 0.010
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
180
400 GPM
250 400 GPM
160
Mechanical Power (hp)
140
200
Speed (rpm)
120
80 250 GPM
100
60
40
50 100 GPM
20
0 0 100 GPM
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 46
Power Section Specification (Imperial Units) 625-5655
625-5655
6.25” 5:6
6.25" 5:6Lobes
Lobes5.5
5.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 121.5 in. Overall Length 203.5 in. Flow Range 200-500 GPM
Avg. Diameter 3.410 in. Tube OD 6.25 in. Rev per Unit Volume 0.53 Rev/Gal
Contour Length 115.5 in. Contour Length 187.5 in. Speed Range 106-267 RPM
Eccentricity 0.273 in. Tube ID 5.000 in. No Load Pressure Loss 260 psi
Major Diameter 3.955 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.500 in. Side 1: 8.0 in. Max Pressure 589 psi - psi 884 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 3,037 ft-lbs - ft-lbs 4,556 ft-lbs - ft-lbs
Weight 300 lbs Weight 649 lbs Stall Pressure 942 psi - psi 1,413 psi - psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 4,858 ft-lbs - ft-lbs 7,287 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.398 0.012 3.401 0.009
1
2
3
4
5
6
7 2-OS 3.457 -0.047 3.457 -0.047
8
Reline Lengths (in.) Breen: Max 203.5 Min 191.5 Willis: Max Min Alternate Stator OD: 6.125 in.
0.070
5,000
0.060
4,000
Fit Increase (in)
Torque (ft-lbs)
0.050
3,000 0.040
0.030
2,000
0.020
1,000
0.010
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
500 GPM
250 500 GPM 200
Mechanical Power (hp)
200
Speed (rpm)
150
350 GPM
150 350 GPM
100
100
200 GPM
50 200 GPM
50
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 47
Power Section Specification (Imperial Units) 625-7825
625-7825
6.25” 7:8
6.25" 7:8Lobes
Lobes2.5
2.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 197.5 in. Overall Length 203.2 in. Flow Range 300-500 GPM
Avg. Diameter 3.695 in. Tube OD 6.25 in. Rev per Unit Volume 0.16 Rev/Gal
Contour Length 191.5 in. Contour Length 188.2 in. Speed Range 48-80 RPM
Eccentricity 0.230 in. Tube ID 5.000 in. No Load Pressure Loss 147 psi
Major Diameter 4.155 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.500 in. Side 1: 7.5 in. Max Pressure 264 psi 330 psi 396 psi 436 psi
Head Length 6.00 in. Side 2: 7.5 in. Max Torque 4,326 ft-lbs 5,407 ft-lbs 6,489 ft-lbs 7,138 ft-lbs
Weight 598 lbs Weight 684 lbs Stall Pressure 422 psi 528 psi 633 psi 696 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 6,915 ft-lbs 8,652 ft-lbs 10,373 ft-lbs 11,405 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.676 0.019 3.664 0.031 3.676 0.019 3.661 0.034
1
2
3
4 OS 3.710 -0.015 3.696 -0.001 3.704 -0.009 3.691 0.004
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 203.2 Min 191.2 Alternate Stator OD: 6.5 in.
8,000 0.070
7,000
0.060
6,000
Fit Increase (in)
Torque (ft-lbs)
0.050
5,000
0.040
4,000
0.030
3,000
0.020
2,000
1,000 0.010
0 0.000
0 100 200 300 400 500 0 50 100 150 200 250
80
500 GPM 100
70 500 GPM
Mechanical Power (hp)
60 400 GPM 80
Speed (rpm)
50 400 GPM
60
300 GPM
40
30 40 300 GPM
20
20
10
0 0
0 100 200 300 400 500 600 0 100 200 300 400 500 600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 48
Power Section Specification (Imperial Units) 625-7828
625-7828
6.25” 7:8
6.25" 7:8Lobes
Lobes2.8
2.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 117.0 in. Overall Length 124.0 in. Flow Range 150-400 GPM
Avg. Diameter 3.530 in. Tube OD 6.25 in. Rev per Unit Volume 0.33 Rev/Gal
Contour Length 111.0 in. Contour Length 108.0 in. Speed Range 49-133 RPM
Eccentricity 0.225 in. Tube ID 5.000 in. No Load Pressure Loss 114 psi
Major Diameter 3.980 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.500 in. Side 1: 8.0 in. Max Pressure 340 psi 425 psi 510 psi 561 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 2,692 ft-lbs 3,365 ft-lbs 4,038 ft-lbs 4,442 ft-lbs
Weight 339 lbs Weight 420 lbs Stall Pressure 544 psi 680 psi 816 psi 897 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 4,307 ft-lbs 5,384 ft-lbs 6,461 ft-lbs 7,103 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 3.513 0.017 3.501 0.029 3.506 0.024 3.498 0.032
0 S OS 3.527 0.003 3.534 -0.004 3.519 0.011 3.530 0.000 3.535 -0.005 3.511 0.019
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 130 Min 118 Willis: Max 130 Min 112 Alternate Stator OD: 6.5 in.
4,500 0.080
4,000
0.070
3,500
0.060
Fit Increase (in)
Torque (ft-lbs)
3,000
0.050
2,500
0.040
2,000
0.030
1,500
1,000 0.020
500 0.010
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
100
80
Speed (rpm)
80 275 GPM
60
275 GPM
60
40
40 150 GPM
20
20 150 GPM
0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 49
Power Section Specification (Imperial Units) 625-7829 (A)
625-7829 (A)
6.25” 7:8
6.25" 7:8Lobes
Lobes2.9
2.9 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 221.0 in. Overall Length 228.8 in. Flow Range 200-500 GPM
Avg. Diameter 3.737 in. Tube OD 6.25 in. Rev per Unit Volume 0.16 Rev/Gal
Contour Length 215.0 in. Contour Length 212.8 in. Speed Range 31-79 RPM
Eccentricity 0.233 in. Tube ID 5.000 in. No Load Pressure Loss 126 psi
Major Diameter 4.203 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 8.0 in. Max Pressure 354 psi 443 psi 531 psi 584 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 5,858 ft-lbs 7,322 ft-lbs 8,787 ft-lbs 9,666 ft-lbs
Weight 688 lbs Weight 768 lbs Stall Pressure 566 psi 708 psi 849 psi 934 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 9,366 ft-lbs 11,716 ft-lbs 14,049 ft-lbs 15,456 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 3.727 0.010 3.717 0.020 3.718 0.019 3.709 0.028
0 S 3.737 0.000 3.733 0.004
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 228.8 Min 216.8 Willis: Max 228.8 Min 216.8 Alternate Stator OD: 6.5 in.
0.070
10,000
0.060
8,000
Fit Increase (in)
Torque (ft-lbs)
0.050
6,000 0.040
0.030
4,000
0.020
2,000
0.010
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
80 140
500 GPM 500 GPM
70
Mechanical Power (hp)
120
60
100
Speed (rpm)
50 350 GPM
80
40 350 GPM
60
30
200 GPM
40
20
200 GPM
10 20
0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 50
Power Section Specification (Imperial Units) 625-7830
625-7830
6.25”7:8
6.25" 7:8Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 117.0 in. Overall Length 124.0 in. Flow Range 150-400 GPM
Avg. Diameter 3.515 in. Tube OD 6.25 in. Rev per Unit Volume 0.31 Rev/Gal
Contour Length 111.0 in. Contour Length 108.0 in. Speed Range 46-124 RPM
Eccentricity 0.233 in. Tube ID 5.000 in. No Load Pressure Loss 106 psi
Major Diameter 3.980 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.500 in. Side 1: 8.0 in. Max Pressure 380 psi 475 psi 570 psi 627 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 3,211 ft-lbs 4,014 ft-lbs 4,816 ft-lbs 5,298 ft-lbs
Weight 361 lbs Weight 414 lbs Stall Pressure 608 psi 760 psi 912 psi 1,003 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 5,137 ft-lbs 6,422 ft-lbs 7,706 ft-lbs 8,475 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.509 0.006 3.499 0.016 3.513 0.002 3.493 0.022
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max Min Willis: Max 124 Min 112 Alternate Stator OD: 6.5 in.
0.080
5,000
0.070
4,000 0.060
Fit Increase (in)
Torque (ft-lbs)
0.050
3,000
0.040
2,000 0.030
0.020
1,000
0.010
0 0.000
0 100 200 300 400 500 600 700 800 0 50 100 150 200 250
120 120
400 GPM
400 GPM
Mechanical Power (hp)
100 100
Speed (rpm)
80 80
275 GPM
60 60 275 GPM
40 150 GPM 40
20 20 150 GPM
0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 51
Power Section Specification (Imperial Units) 625-7835
625-7835
6.25” 7:8
6.25" 7:8Lobes
Lobes3.5
3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 222.3 in. Overall Length 231.3 in. Flow Range 150-400 GPM
Avg. Diameter 3.620 in. Tube OD 6.25 in. Rev per Unit Volume 0.21 Rev/Gal
Contour Length 216.3 in. Contour Length 215.3 in. Speed Range 31-83 RPM
Eccentricity 0.225 in. Tube ID 5.000 in. No Load Pressure Loss 113 psi
Major Diameter 4.070 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.500 in. Side 1: 8.0 in. Max Pressure 461 psi 576 psi 692 psi 761 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 5,844 ft-lbs 7,305 ft-lbs 8,766 ft-lbs 9,643 ft-lbs
Weight 645 lbs Weight 784 lbs Stall Pressure 737 psi 922 psi 1,106 psi 1,217 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 9,343 ft-lbs 11,689 ft-lbs 14,021 ft-lbs 15,429 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.595 0.025 3.584 0.036 3.596 0.024 3.580 0.040
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max Min Willis: Max 231.3 Min 219.3 Alternate Stator OD: 6.5 in.
0.070
10,000
0.060
8,000
Fit Increase (in)
Torque (ft-lbs)
0.050
6,000 0.040
0.030
4,000
0.020
2,000
0.010
0 0.000
0 100 200 300 400 500 600 700 800 900 0 50 100 150 200 250
80 140
400 GPM 400 GPM
70
Mechanical Power (hp)
120
60
100
Speed (rpm)
50 275 GPM
80
40 275 GPM
60
30
150 GPM
40
20
20 150 GPM
10
0 0
0 200 400 600 800 1,000 0 200 400 600 800 1,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 52
Power Section Specification (Imperial Units) 625-7848
625-7848
6.25” 7:8
6.25" 7:8Lobes
Lobes4.8
4.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 195.0 in. Overall Length 203.2 in. Flow Range 200-500 GPM
Avg. Diameter 3.530 in. Tube OD 6.25 in. Rev per Unit Volume 0.34 Rev/Gal
Contour Length 188.5 in. Contour Length 187.2 in. Speed Range 67-168 RPM
Eccentricity 0.225 in. Tube ID 5.000 in. No Load Pressure Loss 140 psi
Major Diameter 3.980 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.500 in. Side 1: 8.0 in. Max Pressure 647 psi 809 psi 971 psi 1,068 psi
Head Length 6.50 in. Side 2: 8.0 in. Max Torque 5,061 ft-lbs 6,327 ft-lbs 7,592 ft-lbs 8,352 ft-lbs
Weight 565 lbs Weight 690 lbs Stall Pressure 1,035 psi 1,294 psi 1,552 psi 1,708 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 8,097 ft-lbs 10,123 ft-lbs 12,142 ft-lbs 13,362 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 3.506 0.024 3.496 0.034 3.506 0.024 3.489 0.041
0 S OS 3.536 -0.006 3.541 -0.011 3.531 -0.001 3.532 -0.002 3.528 0.002 3.522 0.008
1
2
3
4 OS 3.559 -0.029 3.557 -0.027
5
6
7
8
Reline Lengths (in.) Breen: Max 203.5 Min 189.5 Willis: Max 203.2 Min 191.2 Alternate Stator OD: 6.5 in.
9,000 0.080
8,000
0.070
7,000
0.060
Fit Increase (in)
Torque (ft-lbs)
6,000
0.050
5,000
0.040
4,000
0.030
3,000
2,000 0.020
1,000 0.010
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
160
500 GPM
250
140 500 GPM
Mechanical Power (hp)
120 200
Speed (rpm)
350 GPM
100
150
80 350 GPM
60 100
200 GPM
40
50 200 GPM
20
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 53
Power Section Specification (Imperial Units) 650-5635
650-5635
6.5” 5:6 Lobes 3.5
6.5" 3.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 112.0 in. Overall Length 121.9 in. Flow Range 300-600 GPM
Avg. Diameter 3.660 in. Tube OD 6.5 in. Rev per Unit Volume 0.53 Rev/Gal
Contour Length 104.7 in. Contour Length 101.9 in. Speed Range 157-315 RPM
Eccentricity 0.280 in. Tube ID 5.250 in. No Load Pressure Loss 151 psi
Major Diameter 4.220 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.220 in. Side 1: 10.0 in. Max Pressure 383 psi 479 psi 575 psi 632 psi
Head Length 7.29 in. Side 2: 10.0 in. Max Torque 2,006 ft-lbs 2,507 ft-lbs 3,009 ft-lbs 3,310 ft-lbs
Weight 284 lbs Weight 443 lbs Stall Pressure 612 psi 766 psi 919 psi 1,011 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 3,206 ft-lbs 4,012 ft-lbs 4,814 ft-lbs 5,296 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.662 -0.002 3.640 0.020 3.653 0.007 3.634 0.026
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 121.9 Min 109.9 Alternate Stator OD: - in.
3,500 0.080
0.070
3,000
0.060
Fit Increase (in)
Torque (ft-lbs)
2,500
0.050
2,000
0.040
1,500
0.030
1,000
0.020
500 0.010
0 0.000
0 100 200 300 400 500 600 700 800 0 50 100 150 200 250
180
300 600 GPM
600 GPM
160
Mechanical Power (hp)
250 140
Speed (rpm)
40
50
20
0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 54
Power Section Specification (Imperial Units) 650-8930
650-8930
6.5”8:9
6.5" 8:9Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 118.5 in. Overall Length 125.0 in. Flow Range 200-400 GPM
Avg. Diameter 4.113 in. Tube OD 6.5 in. Rev per Unit Volume 0.24 Rev/Gal
Contour Length 111.1 in. Contour Length 110.5 in. Speed Range 48-96 RPM
Eccentricity 0.244 in. Tube ID 5.500 in. No Load Pressure Loss 106 psi
Major Diameter 4.600 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 7.3 in. Max Pressure 417 psi 521 psi 626 psi 688 psi
Head Length 7.40 in. Side 2: 7.3 in. Max Torque 4,437 ft-lbs 5,546 ft-lbs 6,655 ft-lbs 7,321 ft-lbs
Weight 503 lbs Weight 355 lbs Stall Pressure 667 psi 834 psi 1,000 psi 1,100 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 7,097 ft-lbs 8,874 ft-lbs 10,640 ft-lbs 11,704 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 4.066 0.047 4.066 0.047 4.055 0.058 4.065 0.048 4.068 0.045 4.050 0.063
1
2
3
4 OS OS 4.110 0.003 4.106 0.007 4.093 0.020 4.110 0.003 4.111 0.002 4.095 0.018
5
6
7
8
Reline Lengths (in.) Breen: Max 131.1 Min 117 Willis: Max 131 Min 113 Alternate Stator OD: 6.75 in.
8,000 0.070
7,000
0.060
6,000
Fit Increase (in)
Torque (ft-lbs)
0.050
5,000
0.040
4,000
0.030
3,000
0.020
2,000
1,000 0.010
0 0.000
0 100 200 300 400 500 600 700 800 0 50 100 150 200 250
80
300 GPM 300 GPM
60
60
40 200 GPM
40 200 GPM
20
20
0 0
0 200 400 600 800 1,000 0 100 200 300 400 500 600 700 800 900
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 55
Power Section Specification (Imperial Units) 650-8940
650-8940
6.5”8:9
6.5" 8:9Lobes
Lobes44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 152.0 in. Overall Length 170.0 in. Flow Range 200-500 GPM
Avg. Diameter 3.888 in. Tube OD 6.5 in. Rev per Unit Volume 0.17 Rev/Gal
Contour Length 146.0 in. Contour Length 154.0 in. Speed Range 34-86 RPM
Eccentricity 0.216 in. Tube ID 5.250 in. No Load Pressure Loss 139 psi
Major Diameter 4.320 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.800 in. Side 1: 8.0 in. Max Pressure 579 psi 724 psi 869 psi 955 psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 8,607 ft-lbs 10,759 ft-lbs 12,911 ft-lbs 14,202 ft-lbs
Weight 518 lbs Weight 547 lbs Stall Pressure 926 psi 1,158 psi 1,389 psi 1,528 psi
Thread Form 62C0005 Material Alloy Steel Stall Torque 13,766 ft-lbs 17,215 ft-lbs 20,649 ft-lbs 22,715 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1
2
3 S S 3.880 0.008 3.875 0.013 3.860 0.028 3.876 0.012 3.873 0.015 3.855 0.033
4
5
6
7
8
Reline Lengths (in.) Breen: Max 170.1 Min 156.1 Willis: Max Min Alternate Stator OD: in.
14,000 0.070
12,000 0.060
Fit Increase (in)
Torque (ft-lbs)
10,000 0.050
8,000 0.040
6,000 0.030
4,000 0.020
2,000 0.010
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
90
80 500 GPM
500 GPM 200
Mechanical Power (hp)
70
Speed (rpm)
60 150
350 GPM
50
350 GPM
40 100
30 200 GPM
20 50
200 GPM
10
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 56
Power Section Specification (Imperial Units) 650-91037
650-91037
6.5”
6.5" 9:10
9:10Lobes
Lobes3.7
3.7Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 208.5 in. Overall Length 214.5 in. Flow Range 200-500 GPM
Avg. Diameter 3.644 in. Tube OD 6.5 in. Rev per Unit Volume 0.18 Rev/Gal
Contour Length 201.0 in. Contour Length 198.5 in. Speed Range 35-88 RPM
Eccentricity 0.182 in. Tube ID 5.500 in. No Load Pressure Loss 201 psi
Major Diameter 4.008 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.100 in. Side 1: 8.0 in. Max Pressure 327 psi 409 psi 491 psi 540 psi
Head Length 7.50 in. Side 2: 8.0 in. Max Torque 4,625 ft-lbs 5,782 ft-lbs 6,938 ft-lbs 7,632 ft-lbs
Weight 599 lbs Weight 672 lbs Stall Pressure 523 psi 654 psi 784 psi 863 psi
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 7,398 ft-lbs 9,251 ft-lbs 11,090 ft-lbs 12,208 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.650 -0.006 3.638 0.006 3.652 -0.009 3.630 0.014
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 214.5 Min 202.5 Alternate Stator OD: - in.
8,000
0.100
7,000
6,000 0.080
Fit Increase (in)
Torque (ft-lbs)
5,000
0.060
4,000
3,000 0.040
2,000
0.020
1,000
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
90
120
80 500 GPM 500 GPM
Mechanical Power (hp)
70 100
Speed (rpm)
60
350 GPM 80
50
350 GPM
60
40
30 200 GPM 40
20
20 200 GPM
10
0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 57
Power Section Specification (Imperial Units) 650-91040
650-91040
6.5” 9:10
6.5" 9:10 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 146.5 in. Overall Length 152.0 in. Flow Range 200-500 GPM
Avg. Diameter 3.654 in. Tube OD 6.5 in. Rev per Unit Volume 0.35 Rev/Gal
Contour Length 139.0 in. Contour Length 136.0 in. Speed Range 70-175 RPM
Eccentricity 0.179 in. Tube ID 5.500 in. No Load Pressure Loss 199 psi
Major Diameter 4.012 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.100 in. Side 1: 8.0 in. Max Pressure 528 psi 660 psi 792 psi 871 psi
Head Length 7.50 in. Side 2: 8.0 in. Max Torque 3,773 ft-lbs 4,716 ft-lbs 5,660 ft-lbs 6,226 ft-lbs
Weight 430 lbs Weight 472 lbs Stall Pressure 844 psi 1,056 psi 1,267 psi 1,393 psi
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 6,031 ft-lbs 7,546 ft-lbs 9,054 ft-lbs 9,955 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.664 -0.011 3.652 0.001 3.661 -0.008 3.643 0.011
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 152 Min 140 Alternate Stator OD: - in.
7,000
0.100
6,000
0.080
Fit Increase (in)
Torque (ft-lbs)
5,000
4,000 0.060
3,000
0.040
2,000
0.020
1,000
0 0.000
0 200 400 600 800 1,000 0 50 100 150 200 250
180
500 GPM
140
Speed (rpm)
120 150
350 GPM
100
60 200 GPM
40 50
200 GPM
20
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 58
Power Section Specification (Imperial Units) 675-2370
675-2370
6.75”2:3
6.75" 2:3Lobes
Lobes77Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 194.0 in. Overall Length 200.0 in. Flow Range 300-600 GPM
Avg. Diameter 2.945 in. Tube OD 6.75 in. Rev per Unit Volume 0.76 Rev/Gal
Contour Length 188.0 in. Contour Length 184.0 in. Speed Range 228-457 RPM
Eccentricity 0.487 in. Tube ID 5.500 in. No Load Pressure Loss 127 psi
Major Diameter 3.919 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.920 in. Side 1: 8.0 in. Max Pressure 801 psi - psi 1,202 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 3,088 ft-lbs - ft-lbs 4,632 ft-lbs - ft-lbs
Weight 384 lbs Weight 770 lbs Stall Pressure 1,281 psi - psi 1,922 psi - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 4,938 ft-lbs - ft-lbs 7,410 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1
2
3
4 OS 2.993 -0.048 3.001 -0.056
5
6
7
8
Reline Lengths (in.) Breen: Max 200 Min 188 Willis: Max - Min - Alternate Stator OD: - in.
5,000 0.100
4,000 0.080
Fit Increase (in)
Torque (ft-lbs)
3,000 0.060
2,000 0.040
1,000 0.020
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 0 50 100 150 200 250
450 400
600 GPM
600 GPM
400
350
Mechanical Power (hp)
350
300
450 GPM
Speed (rpm)
300
250 450 GPM
250
200
200 300 GPM
150
150
300 GPM
100 100
50 50
0 0
0 200 400 600 800 1,000 1,200 1,400 1,600 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 59
Power Section Specification (Imperial Units) 675-2380
675-2380
6.75”2:3
6.75" 2:3Lobes
Lobes88Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 202.5 in. Overall Length 210.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.020 in. Tube OD 6.75 in. Rev per Unit Volume 0.88 Rev/Gal
Contour Length 195.5 in. Contour Length 195.0 in. Speed Range 262-525 RPM
Eccentricity 0.500 in. Tube ID 5.500 in. No Load Pressure Loss 105 psi
Major Diameter 4.020 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 3.500 in. Side 1: 7.5 in. Max Pressure 947 psi 1,184 psi 1,421 psi 1,563 psi
Head Length 7.00 in. Side 2: 7.5 in. Max Torque 3,179 ft-lbs 3,973 ft-lbs 4,768 ft-lbs 5,245 ft-lbs
Weight 414 lbs Weight 807 lbs Stall Pressure 1,515 psi 1,894 psi 2,272 psi 2,500 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 5,086 ft-lbs 6,358 ft-lbs 7,627 ft-lbs 8,392 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 2.981 0.039 2.954 0.066 2.974 0.046 2.949 0.071
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 210 Min 198 Alternate Stator OD: - in.
0.120
5,000
0.100
4,000
Fit Increase (in)
Torque (ft-lbs)
0.080
3,000
0.060
2,000
0.040
1,000
0.020
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800 0 50 100 150 200 250
500 500
600 GPM
Mechanical Power (hp)
600 GPM
400 400
Speed (rpm)
450 GPM
300 300
450 GPM
300 GPM
200 200
300 GPM
100 100
0 0
0 500 1,000 1,500 2,000 0 500 1,000 1,500 2,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 60
Power Section Specification (Imperial Units) 675-4548
675-4548
6.75” 4:5
6.75" 4:5Lobes
Lobes4.8
4.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 141.5 in. Overall Length 148.5 in. Flow Range 300-600 GPM
Avg. Diameter 3.510 in. Tube OD 6.75 in. Rev per Unit Volume 0.50 Rev/Gal
Contour Length 134.3 in. Contour Length 133.5 in. Speed Range 148-297 RPM
Eccentricity 0.355 in. Tube ID 5.500 in. No Load Pressure Loss 120 psi
Major Diameter 4.220 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 7.5 in. Max Pressure 573 psi 716 psi 860 psi 945 psi
Head Length 7.16 in. Side 2: 7.5 in. Max Torque 3,256 ft-lbs 4,070 ft-lbs 4,884 ft-lbs 5,372 ft-lbs
Weight 406 lbs Weight 560 lbs Stall Pressure 916 psi 1,146 psi 1,375 psi 1,512 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 5,205 ft-lbs 6,512 ft-lbs 7,813 ft-lbs 8,592 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 3.486 0.024 3.470 0.040 3.489 0.021 3.461 0.049
0 S OS 3.516 -0.006 3.529 -0.019 3.511 -0.001 3.521 -0.011 3.529 -0.019 3.493 0.017
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 153.5 Min 139.5 Willis: Max 153 Min 136.5 Alternate Stator OD: 6.50 / 7.00 in.
6,000
0.100
5,000
0.080
Fit Increase (in)
Torque (ft-lbs)
4,000
0.060
3,000
0.040
2,000
0.020
1,000
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
300 300
600 GPM
Mechanical Power (hp)
600 GPM
250 250
Speed (rpm)
450 GPM
150 150
300 GPM
100 100
300 GPM
50 50
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 61
Power Section Specification (Imperial Units) 675-4550
675-4550
6.75”4:5
6.75" 4:5Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 136.5 in. Overall Length 146.0 in. Flow Range 200-500 GPM
Avg. Diameter 3.597 in. Tube OD 6.75 in. Rev per Unit Volume 0.53 Rev/Gal
Contour Length 128.7 in. Contour Length 130.0 in. Speed Range 105-264 RPM
Eccentricity 0.362 in. Tube ID 5.500 in. No Load Pressure Loss 106 psi
Major Diameter 4.321 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.125 in. Side 1: 8.0 in. Max Pressure 616 psi 770 psi 924 psi 1,016 psi
Head Length 7.81 in. Side 2: 8.0 in. Max Torque 3,284 ft-lbs 4,105 ft-lbs 4,926 ft-lbs 5,419 ft-lbs
Weight 409 lbs Weight 547 lbs Stall Pressure 985 psi 1,232 psi 1,478 psi 1,626 psi
Thread Form 2 3/8" API IF Material Alloy Steel Stall Torque 5,252 ft-lbs 6,569 ft-lbs 7,880 ft-lbs 8,670 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.552 0.045 3.534 0.063 3.549 0.048 3.526 0.071
1
2
3
4 OS 3.614 -0.017 3.598 -0.001 3.612 -0.015 3.591 0.006
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 146 Min 134 Alternate Stator OD: - in.
6,000
0.100
5,000
0.080
Fit Increase (in)
Torque (ft-lbs)
4,000
0.060
3,000
0.040
2,000
0.020
1,000
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
250 250
500 GPM 500 GPM
Mechanical Power (hp)
200 200
Speed (rpm)
350 GPM
150 150
350 GPM
100 100
200 GPM
50 50 200 GPM
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 62
Power Section Specification (Imperial Units) 675-4570
675-4570
6.75”4:5
6.75" 4:5Lobes
Lobes77Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 202.5 in. Overall Length 210.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.510 in. Tube OD 6.75 in. Rev per Unit Volume 0.50 Rev/Gal
Contour Length 195.5 in. Contour Length 195.0 in. Speed Range 149-298 RPM
Eccentricity 0.355 in. Tube ID 5.500 in. No Load Pressure Loss 120 psi
Major Diameter 4.220 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 7.5 in. Max Pressure 893 psi 1,116 psi 1,340 psi 1,473 psi
Head Length 7.00 in. Side 2: 7.5 in. Max Torque 5,066 ft-lbs 6,333 ft-lbs 7,600 ft-lbs 8,360 ft-lbs
Weight 579 lbs Weight 794 lbs Stall Pressure 1,428 psi 1,786 psi 2,143 psi 2,357 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 8,102 ft-lbs 10,133 ft-lbs 12,159 ft-lbs 13,373 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T U/S S 3.486 0.024 3.486 0.024 3.468 0.042 3.487 0.023 3.473 0.037 3.467 0.043
0 S OS 3.519 -0.009 3.530 -0.020 3.517 -0.007 3.516 -0.006 3.519 -0.009 3.512 -0.002
1
2 0.5-OS 1.5-OS 3.523 -0.013 3.522 -0.012 3.530 -0.020 3.535 -0.025 3.520 -0.010
3
4 OS 2-OS 3.552 -0.042 3.560 -0.050 3.536 -0.026 3.549 -0.039 3.552 -0.042 3.530 -0.020
5
6
7
8
Reline Lengths (in.) Breen: Max 214.6 Min 200.6 Willis: Max 214 Min 198 Alternate Stator OD: 6.50 / 7.00 in.
9,000
0.100
8,000
7,000
0.080
Fit Increase (in)
Torque (ft-lbs)
6,000
5,000 0.060
4,000
0.040
3,000
2,000
0.020
1,000
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800 0 50 100 150 200 250
450
300
600 GPM
400
600 GPM
Mechanical Power (hp)
250 350
Speed (rpm)
300
200 450 GPM
250 450 GPM
150
200
300 GPM
100 150
300 GPM
100
50
50
0 0
0 500 1,000 1,500 2,000 0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 63
Power Section Specification (Imperial Units) 675-5650 (A)
675-5650 (A)
6.75”5:6
6.75" 5:6Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 175.5 in. Overall Length 181.5 in. Flow Range 300-600 GPM
Avg. Diameter 3.572 in. Tube OD 6.75 in. Rev per Unit Volume 0.38 Rev/Gal
Contour Length 168.0 in. Contour Length 164.3 in. Speed Range 114-228 RPM
Eccentricity 0.307 in. Tube ID 5.450 in. No Load Pressure Loss 133 psi
Major Diameter 4.185 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.285 in. Side 1: 8.6 in. Max Pressure 617 psi 771 psi 926 psi 1,018 psi
Head Length 7.50 in. Side 2: 8.6 in. Max Torque 4,459 ft-lbs 5,573 ft-lbs 6,688 ft-lbs 7,357 ft-lbs
Weight 487 lbs Weight 711 lbs Stall Pressure 987 psi 1,234 psi 1,480 psi 1,628 psi
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 7,133 ft-lbs 8,918 ft-lbs 10,695 ft-lbs 11,765 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.572 -0.001 3.551 0.020 3.571 0.000 3.543 0.028
1
2
3
4
5
6
7 2-OS 3.613 -0.042 3.594 -0.023 3.613 -0.042 3.587 -0.016
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 181.5 Min 169.5 Alternate Stator OD: - in.
8,000
0.100
7,000
6,000 0.080
Fit Increase (in)
Torque (ft-lbs)
5,000
0.060
4,000
3,000 0.040
2,000
0.020
1,000
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
250
450 GPM
Speed (rpm)
150
200
450 GPM
150
100 300 GPM
100
300 GPM
50
50
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 64
Power Section Specification (Imperial Units) 675-5650 (B)
675-5650 (B)
6.75”5:6
6.75" 5:6Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 190.0 in. Overall Length 196.5 in. Flow Range 300-600 GPM
Avg. Diameter 3.379 in. Tube OD 6.75 in. Rev per Unit Volume 0.19 Rev/Gal
Contour Length 184.0 in. Contour Length 180.5 in. Speed Range 58-116 RPM
Eccentricity 0.294 in. Tube ID 5.500 in. No Load Pressure Loss 107 psi
Major Diameter 3.966 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 8.0 in. Max Pressure 578 psi - psi 867 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 8,240 ft-lbs - ft-lbs 12,360 ft-lbs - ft-lbs
Weight 516 lbs Weight 637 lbs Stall Pressure 924 psi - psi 1,387 psi - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,173 ft-lbs - ft-lbs 19,774 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.391 -0.012 3.394 -0.015
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 196.5 Min 186 Willis: Max - Min - Alternate Stator OD: - in.
0.090
14,000
0.080
12,000
0.070
Fit Increase (in)
Torque (ft-lbs)
10,000
0.060
8,000 0.050
0.040
6,000
0.030
4,000
0.020
2,000
0.010
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
600 GPM
100
200
Speed (rpm)
50
20
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 65
Power Section Specification (Imperial Units) 675-5668
675-5668
6.75” 5:6
6.75" 5:6Lobes
Lobes6.8
6.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 222.0 in. Overall Length 227.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.690 in. Tube OD 6.75 in. Rev per Unit Volume 0.32 Rev/Gal
Contour Length 213.4 in. Contour Length 211.0 in. Speed Range 97-194 RPM
Eccentricity 0.313 in. Tube ID 5.500 in. No Load Pressure Loss 232 psi
Major Diameter 4.316 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.130 in. Side 1: 8.0 in. Max Pressure 784 psi - psi 1,176 psi - psi
Head Length 8.60 in. Side 2: 8.0 in. Max Torque 6,668 ft-lbs - ft-lbs 10,002 ft-lbs - ft-lbs
Weight 696 lbs Weight 887 lbs Stall Pressure 1,254 psi - psi 1,881 psi - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 10,666 ft-lbs - ft-lbs 15,999 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.679 0.011 3.672 0.018
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 227 Min 216 Willis: Max - Min - Alternate Stator OD: 6.5 in.
0.080
12,000
0.070
10,000
0.060
Fit Increase (in)
Torque (ft-lbs)
8,000 0.050
6,000 0.040
0.030
4,000
0.020
2,000
0.010
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 0 50 100 150 200 250
200
Mechanical Power (hp)
300
600 GPM
250
Speed (rpm)
150
450 GPM
450 GPM 200
100
150
300 GPM
300 GPM
100
50
50
0 0
0 200 400 600 800 1,000 1,200 1,400 1,600 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 66
Power Section Specification (Imperial Units) 675-6750
675-6750
6.75”6:7
6.75" 6:7Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 194.0 in. Overall Length 200.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.739 in. Tube OD 6.75 in. Rev per Unit Volume 0.28 Rev/Gal
Contour Length 188.0 in. Contour Length 185.5 in. Speed Range 85-170 RPM
Eccentricity 0.288 in. Tube ID 5.500 in. No Load Pressure Loss 131 psi
Major Diameter 4.316 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 7.3 in. Max Pressure 670 psi 838 psi 1,005 psi 1,106 psi
Head Length 6.00 in. Side 2: 7.3 in. Max Torque 6,366 ft-lbs 7,958 ft-lbs 9,550 ft-lbs 10,505 ft-lbs
Weight 601 lbs Weight 746 lbs Stall Pressure 1,072 psi 1,340 psi 1,608 psi 1,768 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 10,187 ft-lbs 12,733 ft-lbs 15,280 ft-lbs 16,801 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T US S 3.739 0.000 3.735 0.004 3.722 0.017 3.730 0.009 3.728 0.011 3.720 0.019
0 S 3.750 -0.011 3.744 -0.005
1
2
3 OS 3.759 -0.020 3.746 -0.007 3.755 -0.016 3.736 0.003
4 OS 3.773 -0.034 3.767 -0.028
5
6 2-OS 3.794 -0.055 3.778 -0.039 3.779 -0.040 3.770 -0.031
7 2-OS 3.787 -0.048 3.792 -0.053
8
Reline Lengths (in.) Breen: Max 200 Min 186 Willis: Max 206 Min 188 Alternate Stator OD: 6.50 / 7.00 in.
0.090
10,000
0.080
0.070
8,000
Fit Increase (in)
Torque (ft-lbs)
0.060
6,000 0.050
0.040
4,000
0.030
0.020
2,000
0.010
0 0.000
0 200 400 600 800 1,000 1,200 1,400 0 50 100 150 200 250
160
600 GPM 300 600 GPM
140
Mechanical Power (hp)
250
120
450 GPM
Speed (rpm)
100 200
450 GPM
80 150
300 GPM
60
100 300 GPM
40
50
20
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 67
Power Section Specification (Imperial Units) 675-6760
675-6760
6.75”6:7
6.75" 6:7Lobes
Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 242.0 in. Overall Length 250.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.739 in. Tube OD 6.75 in. Rev per Unit Volume 0.24 Rev/Gal
Contour Length 236.0 in. Contour Length 234.0 in. Speed Range 70-141 RPM
Eccentricity 0.288 in. Tube ID 5.500 in. No Load Pressure Loss 236 psi
Major Diameter 4.316 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 8.0 in. Max Pressure 770 psi - psi 1,155 psi - psi
Head Length 6.00 in. Side 2: 8.0 in. Max Torque 8,774 ft-lbs - ft-lbs 13,161 ft-lbs - ft-lbs
Weight 740 lbs Weight 973 lbs Stall Pressure 1,232 psi - psi 1,848 psi - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 14,038 ft-lbs - ft-lbs 21,058 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.750 -0.011 3.739 0.000
1
2
3
4 OS 3.770 -0.031 3.765 -0.026
5
6
7
8
Reline Lengths (in.) Breen: Max 250 Min 236 Willis: Max - Min - Alternate Stator OD: 6.5 in.
16,000 0.070
14,000
0.060
12,000
Fit Increase (in)
Torque (ft-lbs)
0.050
10,000
0.040
8,000
0.030
6,000
0.020
4,000
2,000 0.010
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 0 50 100 150 200 250
120 300
100 250
Speed (rpm)
450 GPM
450 GPM
80 200
300 GPM
40 100
20 50
0 0
0 200 400 600 800 1,000 1,200 1,400 1,600 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 68
Power Section Specification (Imperial Units) 675-7820 (A)
675-7820 (A)
6.75”7:8
6.75" 7:8Lobes
Lobes22Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 147.0 in. Overall Length 153.5 in. Flow Range 300-600 GPM
Avg. Diameter 3.990 in. Tube OD 6.75 in. Rev per Unit Volume 0.14 Rev/Gal
Contour Length 139.6 in. Contour Length 137.5 in. Speed Range 42-85 RPM
Eccentricity 0.255 in. Tube ID 5.500 in. No Load Pressure Loss 140 psi
Major Diameter 4.500 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 8.0 in. Max Pressure 187 psi 234 psi 281 psi 309 psi
Head Length 7.40 in. Side 2: 8.0 in. Max Torque 3,477 ft-lbs 4,346 ft-lbs 5,215 ft-lbs 5,737 ft-lbs
Weight 547 lbs Weight 565 lbs Stall Pressure 299 psi 374 psi 448 psi 493 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 5,560 ft-lbs 6,954 ft-lbs 8,330 ft-lbs 9,167 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.978 0.012 3.966 0.024 3.983 0.007 3.959 0.031
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max Min Willis: Max 153.5 Min 141.5 Alternate Stator OD: 6.5 in.
0.080
6,000
0.070
5,000
0.060
Fit Increase (in)
Torque (ft-lbs)
4,000 0.050
3,000 0.040
0.030
2,000
0.020
1,000
0.010
0 0.000
0 50 100 150 200 250 300 350 0 50 100 150 200 250
80 90
600 GPM
80 600 GPM
70
Mechanical Power (hp)
70
60
450 GPM
Speed (rpm)
60
50
50 450 GPM
40
300 GPM 40
30
30
300 GPM
20
20
10 10
0 0
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 69
Power Section Specification (Imperial Units) 675-7820 (B)
675-7820 (B)
6.75”7:8
6.75" 7:8Lobes
Lobes22Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 147.0 in. Overall Length 153.5 in. Flow Range 200-500 GPM
Avg. Diameter 3.808 in. Tube OD 6.75 in. Rev per Unit Volume 0.11 Rev/Gal
Contour Length 140.3 in. Contour Length 137.5 in. Speed Range 21-53 RPM
Eccentricity 0.244 in. Tube ID 5.500 in. No Load Pressure Loss 228 psi
Major Diameter 4.295 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 8.0 in. Max Pressure 103 psi - psi 155 psi - psi
Head Length 6.70 in. Side 2: 8.0 in. Max Torque 2,549 ft-lbs - ft-lbs 3,823 ft-lbs - ft-lbs
Weight 452 lbs Weight 578 lbs Stall Pressure 164 psi - psi 247 psi - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 4,058 ft-lbs - ft-lbs 6,113 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T US 3.771 0.037 3.771 0.037
0 S 3.802 0.006 3.793 0.015
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 153.5 Min 139.5 Willis: Max Min Alternate Stator OD: 6.5 in.
4,500
0.070
4,000
0.060
3,500
Fit Increase (in)
Torque (ft-lbs)
0.050
3,000
2,500 0.040
2,000
0.030
1,500
0.020
1,000
0.010
500
0 0.000
0 50 100 150 200 0 50 100 150 200 250
30
40
25
Speed (rpm)
15
20
200 GPM
10
200 GPM
10
5
0 0
0 50 100 150 200 0 50 100 150 200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 70
Power Section Specification (Imperial Units) 675-7821
675-7821
6.75” 7:8
6.75" 7:8Lobes
Lobes2.1
2.1 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 221.0 in. Overall Length 230.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.818 in. Tube OD 6.75 in. Rev per Unit Volume 0.12 Rev/Gal
Contour Length 213.0 in. Contour Length 212.0 in. Speed Range 35-70 RPM
Eccentricity 0.224 in. Tube ID 5.310 in. No Load Pressure Loss 170 psi
Major Diameter 4.265 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 9.0 in. Max Pressure 177 psi 221 psi 266 psi 292 psi
Head Length 8.00 in. Side 2: 9.0 in. Max Torque 3,953 ft-lbs 4,942 ft-lbs 5,930 ft-lbs 6,523 ft-lbs
Weight 672 lbs Weight 967 lbs Stall Pressure 283 psi 354 psi 424 psi 467 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 6,321 ft-lbs 7,907 ft-lbs 9,470 ft-lbs 10,431 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.823 -0.005 3.813 0.005 3.820 -0.002 3.808 0.010
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 230 Min 218 Alternate Stator OD: 7 in.
7,000 0.080
0.070
6,000
0.060
Fit Increase (in)
Torque (ft-lbs)
5,000
0.050
4,000
0.040
3,000
0.030
2,000
0.020
1,000 0.010
0 0.000
0 50 100 150 200 250 300 350 0 50 100 150 200 250
70 80
600 GPM
600 GPM
70
Mechanical Power (hp)
60
60
50
Speed (rpm)
450 GPM
50 450 GPM
40
40
30 300 GPM
30
300 GPM
20
20
10 10
0 0
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 71
Power Section Specification (Imperial Units) 675-7829 (B)
675-7829 (B)
6.75” 7:8
6.75" 7:8Lobes
Lobes2.9
2.9 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 213.5 in. Overall Length 220.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.808 in. Tube OD 6.75 in. Rev per Unit Volume 0.17 Rev/Gal
Contour Length 206.5 in. Contour Length 204.0 in. Speed Range 50-100 RPM
Eccentricity 0.244 in. Tube ID 5.500 in. No Load Pressure Loss 161 psi
Major Diameter 4.296 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 8.0 in. Max Pressure 331 psi 414 psi 497 psi 546 psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 5,231 ft-lbs 6,538 ft-lbs 7,846 ft-lbs 8,631 ft-lbs
Weight 653 lbs Weight 836 lbs Stall Pressure 529 psi 662 psi 794 psi 873 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 8,360 ft-lbs 10,462 ft-lbs 12,548 ft-lbs 13,796 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 3.791 0.017 3.777 0.031 3.779 0.029 3.766 0.042
0 S 3.801 0.007 3.796 0.012
1
2 0.5-OS OS 3.815 -0.007 3.822 -0.014 3.811 -0.003 3.821 -0.013 3.820 -0.012 3.810 -0.002
3
4
5 OS 3.855 -0.047 3.848 -0.040
6
7
8
Reline Lengths (in.) Breen: Max 220 Min 206 Willis: Max 220 Min 208 Alternate Stator OD: 6.5 in.
9,000 0.090
8,000 0.080
7,000 0.070
Fit Increase (in)
Torque (ft-lbs)
6,000 0.060
5,000 0.050
4,000 0.040
3,000 0.030
2,000 0.020
1,000 0.010
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
160
100
600 GPM
140
Mechanical Power (hp)
600 GPM
80 120
Speed (rpm)
300 GPM
40 60
300 GPM
40
20
20
0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 72
Power Section Specification (Imperial Units) 675-7830 (A)
675-7830 (A)
6.75”7:8
6.75" 7:8Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 118.5 in. Overall Length 125.0 in. Flow Range 300-600 GPM
Avg. Diameter 4.009 in. Tube OD 6.75 in. Rev per Unit Volume 0.28 Rev/Gal
Contour Length 111.3 in. Contour Length 110.5 in. Speed Range 84-169 RPM
Eccentricity 0.256 in. Tube ID 5.500 in. No Load Pressure Loss 145 psi
Major Diameter 4.520 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 7.3 in. Max Pressure 357 psi 446 psi 536 psi 589 psi
Head Length 7.16 in. Side 2: 7.3 in. Max Torque 3,337 ft-lbs 4,172 ft-lbs 5,006 ft-lbs 5,507 ft-lbs
Weight 443 lbs Weight 459 lbs Stall Pressure 571 psi 714 psi 856 psi 942 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 5,338 ft-lbs 6,675 ft-lbs 8,003 ft-lbs 8,807 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 3.979 0.029 3.967 0.041 3.980 0.028 3.959 0.049
0 S OS 4.012 -0.003 4.016 -0.008 4.004 0.005 4.007 0.002 4.010 -0.002 3.995 0.013
1
2
3
4 OS 2-OS 4.043 -0.035 4.034 -0.026 4.023 -0.015 4.043 -0.035 4.030 -0.022 4.016 -0.008
5
6
7
8
Reline Lengths (in.) Breen: Max 131.1 Min 117 Willis: Max 131 Min 113 Alternate Stator OD: 6.5 in.
0.080
6,000
0.070
5,000
0.060
Fit Increase (in)
Torque (ft-lbs)
4,000 0.050
3,000 0.040
0.030
2,000
0.020
1,000
0.010
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
160 160
600 GPM 600 GPM
140 140
Mechanical Power (hp)
120 120
450 GPM
Speed (rpm)
80 80
300 GPM
60 60
300 GPM
40 40
20 20
0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 73
Power Section Specification (Imperial Units) 675-7830 (B)
675-7830 (B)
6.75”7:8
6.75" 7:8Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 197.5 in. Overall Length 204.0 in. Flow Range 300-600 GPM
Avg. Diameter 4.062 in. Tube OD 6.75 in. Rev per Unit Volume 0.15 Rev/Gal
Contour Length 190.1 in. Contour Length 189.0 in. Speed Range 45-91 RPM
Eccentricity 0.254 in. Tube ID 5.500 in. No Load Pressure Loss 138 psi
Major Diameter 4.569 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 7.5 in. Max Pressure 357 psi 446 psi 536 psi 589 psi
Head Length 7.40 in. Side 2: 7.5 in. Max Torque 6,190 ft-lbs 7,738 ft-lbs 9,285 ft-lbs 10,214 ft-lbs
Weight 757 lbs Weight 748 lbs Stall Pressure 571 psi 714 psi 856 psi 942 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 9,901 ft-lbs 12,380 ft-lbs 14,843 ft-lbs 16,334 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.049 0.012 4.035 0.026 4.045 0.016 4.032 0.029
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 204 Min 192 Alternate Stator OD: 6.5 in.
0.070
10,000
0.060
8,000
Fit Increase (in)
Torque (ft-lbs)
0.050
6,000 0.040
0.030
4,000
0.020
2,000
0.010
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
90 160
600 GPM
600 GPM
80
140
Mechanical Power (hp)
70
120
450 GPM
Speed (rpm)
60
100 450 GPM
50
80
40 300 GPM
60
30
300 GPM
20 40
10 20
0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 74
Power Section Specification (Imperial Units) 675-7833
675-7833
6.75” 7:8
6.75" 7:8Lobes
Lobes3.3
3.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 238.5 in. Overall Length 245.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.990 in. Tube OD 6.75 in. Rev per Unit Volume 0.14 Rev/Gal
Contour Length 231.1 in. Contour Length 229.0 in. Speed Range 42-85 RPM
Eccentricity 0.255 in. Tube ID 5.500 in. No Load Pressure Loss 140 psi
Major Diameter 4.500 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 8.0 in. Max Pressure 405 psi 506 psi 608 psi 668 psi
Head Length 7.40 in. Side 2: 8.0 in. Max Torque 7,531 ft-lbs 9,413 ft-lbs 11,296 ft-lbs 12,426 ft-lbs
Weight 889 lbs Weight 905 lbs Stall Pressure 648 psi 810 psi 972 psi 1,069 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 12,049 ft-lbs 15,062 ft-lbs 18,074 ft-lbs 19,878 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 3.986 0.004 3.978 0.012 3.966 0.024 3.980 0.010 3.974 0.016 3.976 0.014
1
2
3
4 OS OS 4.023 -0.033 4.016 -0.026 4.002 -0.012 4.018 -0.028 4.015 -0.025 3.996 -0.006
5
6
7
8
Reline Lengths (in.) Breen: Max 245 Min 230.6 Willis: Max 245 Min 233 Alternate Stator OD: 6.50 / 7.00 in.
0.080
12,000
0.070
10,000
0.060
Fit Increase (in)
Torque (ft-lbs)
8,000 0.050
6,000 0.040
0.030
4,000
0.020
2,000
0.010
0 0.000
0 100 200 300 400 500 600 700 800 0 50 100 150 200 250
80
600 GPM
70 200
Mechanical Power (hp)
600 GPM
60
450 GPM
Speed (rpm)
150
50
40 450 GPM
300 GPM 100
30
20 300 GPM
50
10
0 0
0 200 400 600 800 1,000 0 100 200 300 400 500 600 700 800 900
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 75
Power Section Specification (Imperial Units) 675-7835
675-7835
6.75” 7:8
6.75" 7:8Lobes
Lobes3.5
3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 252.0 in. Overall Length 260.0 in. Flow Range 300-600 GPM
Avg. Diameter 4.145 in. Tube OD 6.75 in. Rev per Unit Volume 0.14 Rev/Gal
Contour Length 245.0 in. Contour Length 245.0 in. Speed Range 42-85 RPM
Eccentricity 0.247 in. Tube ID 5.500 in. No Load Pressure Loss 142 psi
Major Diameter 4.639 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 8.0 in. Max Pressure 449 psi 561 psi 674 psi 741 psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 8,158 ft-lbs 10,198 ft-lbs 12,238 ft-lbs 13,461 ft-lbs
Weight 899 lbs Weight 971 lbs Stall Pressure 718 psi 898 psi 1,077 psi 1,185 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,046 ft-lbs 16,317 ft-lbs 19,569 ft-lbs 21,532 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.149 -0.004 4.146 -0.001 4.147 -0.002 4.137 0.008
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 260 Min 248 Alternate Stator OD: 6.5 in.
14,000 0.070
12,000 0.060
Fit Increase (in)
Torque (ft-lbs)
10,000 0.050
8,000 0.040
6,000 0.030
4,000 0.020
2,000 0.010
0 0.000
0 100 200 300 400 500 600 700 800 900 0 50 100 150 200 250
90
70
Speed (rpm)
50 450 GPM
30
300 GPM
20 50
10
0 0
0 200 400 600 800 1,000 0 100 200 300 400 500 600 700 800 900
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 76
Power Section Specification (Imperial Units) 675-7850
675-7850
6.75”7:8
6.75" 7:8Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 188.0 in. Overall Length 194.5 in. Flow Range 300-600 GPM
Avg. Diameter 4.009 in. Tube OD 6.75 in. Rev per Unit Volume 0.28 Rev/Gal
Contour Length 181.0 in. Contour Length 180.0 in. Speed Range 83-167 RPM
Eccentricity 0.256 in. Tube ID 5.500 in. No Load Pressure Loss 144 psi
Major Diameter 4.520 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 7.3 in. Max Pressure 675 psi 844 psi 1,013 psi 1,114 psi
Head Length 7.00 in. Side 2: 7.3 in. Max Torque 6,359 ft-lbs 7,949 ft-lbs 9,539 ft-lbs 10,493 ft-lbs
Weight 703 lbs Weight 718 lbs Stall Pressure 1,080 psi 1,350 psi 1,620 psi 1,782 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 10,175 ft-lbs 12,718 ft-lbs 15,262 ft-lbs 16,788 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T US S 3.994 0.014 3.982 0.026 3.971 0.037 3.987 0.021 3.978 0.030 3.966 0.042
0 S OS 4.006 0.002 4.014 -0.006 4.002 0.006 4.001 0.007 4.001 0.007 3.994 0.014
1
2
3
4 OS 2-OS 4.037 -0.029 4.041 -0.033 4.028 -0.019 4.032 -0.024 4.025 -0.017 4.024 -0.016
5
6
7 2-OS 4.068 -0.059 4.060 -0.051
8
Reline Lengths (in.) Breen: Max 194.1 Min 182 Willis: Max 204 Min 182.5 Alternate Stator OD: 6.50 / 7.00 in.
0.080
10,000
0.070
8,000 0.060
Fit Increase (in)
Torque (ft-lbs)
0.050
6,000
0.040
4,000 0.030
0.020
2,000
0.010
0 0.000
0 200 400 600 800 1,000 1,200 1,400 0 50 100 150 200 250
160
600 GPM 300 600 GPM
140
Mechanical Power (hp)
250
120
450 GPM
Speed (rpm)
100 200
450 GPM
80
150
300 GPM
60
100 300 GPM
40
50
20
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 77
Power Section Specification (Imperial Units) 675-7857
675-7857
6.75” 7:8
6.75" 7:8Lobes
Lobes5.7
5.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 251.8 in. Overall Length 260.0 in. Flow Range 300-600 GPM
Avg. Diameter 4.151 in. Tube OD 6.75 in. Rev per Unit Volume 0.23 Rev/Gal
Contour Length 244.8 in. Contour Length 244.0 in. Speed Range 70-140 RPM
Eccentricity 0.246 in. Tube ID 5.500 in. No Load Pressure Loss 143 psi
Major Diameter 4.643 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.500 in. Side 1: 8.0 in. Max Pressure 810 psi 1,013 psi 1,215 psi 1,337 psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 9,136 ft-lbs 11,420 ft-lbs 13,704 ft-lbs 15,075 ft-lbs
Weight 920 lbs Weight 964 lbs Stall Pressure 1,296 psi 1,620 psi 1,944 psi 2,138 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 14,618 ft-lbs 18,272 ft-lbs 21,927 ft-lbs 24,115 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 4.143 0.008 4.146 0.005 4.136 0.015 4.136 0.015 4.137 0.014 4.141 0.010
1
2
3
4 OS 4.158 -0.007 4.156 -0.005
5
6
7
8
Reline Lengths (in.) Breen: Max 260.1 Min 248 Willis: Max 260 Min 248 Alternate Stator OD: 7 in.
16,000 0.070
14,000
0.060
12,000
Fit Increase (in)
Torque (ft-lbs)
0.050
10,000
0.040
8,000
0.030
6,000
0.020
4,000
2,000 0.010
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 0 50 100 150 200 250
140 400
120
300
100
Speed (rpm)
450 GPM
250
80 450 GPM
200
60 300 GPM
150
40 300 GPM
100
20 50
0 0
0 500 1,000 1,500 2,000 0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 78
Power Section Specification (Imperial Units) 675-7864 (A)
675-7864 (A)
6.75” 7:8
6.75" 7:8Lobes
Lobes6.4
6.4 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 238.5 in. Overall Length 245.0 in. Flow Range 300-600 GPM
Avg. Diameter 4.009 in. Tube OD 6.75 in. Rev per Unit Volume 0.28 Rev/Gal
Contour Length 231.5 in. Contour Length 230.5 in. Speed Range 83-166 RPM
Eccentricity 0.256 in. Tube ID 5.500 in. No Load Pressure Loss 143 psi
Major Diameter 4.520 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 7.3 in. Max Pressure 906 psi 1,133 psi 1,359 psi 1,495 psi
Head Length 7.00 in. Side 2: 7.3 in. Max Torque 8,579 ft-lbs 10,724 ft-lbs 12,869 ft-lbs 14,156 ft-lbs
Weight 892 lbs Weight 908 lbs Stall Pressure 1,449 psi 1,812 psi 2,174 psi 2,391 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,721 ft-lbs 17,159 ft-lbs 20,587 ft-lbs 22,642 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.997 0.011 3.981 0.027 3.998 0.010 3.976 0.032
1
2
3
4 OS 4.028 -0.019 4.014 -0.006 4.012 -0.003 4.008 0.000
5
6
7 2-OS 4.049 -0.041 4.035 -0.027 4.048 -0.040 4.034 -0.026
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 245 Min 233 Alternate Stator OD: 6.50 / 7.00 in.
14,000 0.080
0.070
12,000
0.060
Fit Increase (in)
Torque (ft-lbs)
10,000
0.050
8,000
0.040
6,000
0.030
4,000
0.020
2,000 0.010
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800 0 50 100 150 200 250
120 300
450 GPM
Speed (rpm)
80 200
300 GPM
60 150
300 GPM
40 100
20 50
0 0
0 500 1,000 1,500 2,000 0 500 1,000 1,500 2,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 79
Power Section Specification (Imperial Units) 675-7864 (B)
675-7864 (B)
6.75” 7:8
6.75" 7:8Lobes
Lobes6.4
6.4 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 232.5 in. Overall Length 250.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.940 in. Tube OD 6.75 in. Rev per Unit Volume 0.25 Rev/Gal
Contour Length 225.5 in. Contour Length 234.0 in. Speed Range 75-151 RPM
Eccentricity 0.243 in. Tube ID 5.500 in. No Load Pressure Loss 157 psi
Major Diameter 4.425 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 8.0 in. Max Pressure 958 psi - psi 1,437 psi - psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 9,975 ft-lbs - ft-lbs 14,962 ft-lbs - ft-lbs
Weight 782 lbs Weight 932 lbs Stall Pressure 1,532 psi - psi 2,299 psi - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 15,951 ft-lbs - ft-lbs 23,937 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.949 -0.009 3.942 -0.002
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 250.1 Min 238 Willis: Max - Min - Alternate Stator OD: 7 in.
18,000
0.060
16,000
14,000 0.050
Fit Increase (in)
Torque (ft-lbs)
12,000
0.040
10,000
0.030
8,000
6,000 0.020
4,000
0.010
2,000
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800 0 50 100 150 200 250
350
Mechanical Power (hp)
120
450 GPM
250
80
200
300 GPM
60
150
300 GPM
40
100
20 50
0 0
0 500 1,000 1,500 2,000 0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 80
Power Section Specification (Imperial Units) 675-91035
675-91035
6.75” 9:10 Lobes 3.5
6.75" 3.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 204.8 in. Overall Length 210.0 in. Flow Range 250-550 GPM
Avg. Diameter 3.984 in. Tube OD 6.75 in. Rev per Unit Volume 0.18 Rev/Gal
Contour Length 196.8 in. Contour Length 194.0 in. Speed Range 45-99 RPM
Eccentricity 0.198 in. Tube ID 5.500 in. No Load Pressure Loss 167 psi
Major Diameter 4.380 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.250 in. Side 1: 8.0 in. Max Pressure 448 psi 560 psi 672 psi 739 psi
Head Length 8.00 in. Side 2: 8.0 in. Max Torque 6,206 ft-lbs 7,758 ft-lbs 9,309 ft-lbs 10,240 ft-lbs
Weight 678 lbs Weight 796 lbs Stall Pressure 716 psi 896 psi 1,075 psi 1,182 psi
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 9,919 ft-lbs 12,413 ft-lbs 14,892 ft-lbs 16,375 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 3.982 0.002 3.971 0.013 3.987 -0.003 3.966 0.018
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 210 Min 198 Alternate Stator OD: - in.
0.080
10,000
0.070
8,000 0.060
Fit Increase (in)
Torque (ft-lbs)
0.050
6,000
0.040
4,000 0.030
0.020
2,000
0.010
0 0.000
0 100 200 300 400 500 600 700 800 900 0 50 100 150 200 250
180
100 550 GPM
160
Mechanical Power (hp)
550 GPM
140
80
Speed (rpm)
120
400 GPM
60 100 400 GPM
80
40 250 GPM 60
250 GPM
40
20
20
0 0
0 200 400 600 800 1,000 0 100 200 300 400 500 600 700 800 900
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 81
Power Section Specification (Imperial Units) 675-91040
675-91040
6.75”9:10
6.75" 9:10Lobes
Lobes44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 144.0 in. Overall Length 148.8 in. Flow Range 300-600 GPM
Avg. Diameter 4.035 in. Tube OD 6.75 in. Rev per Unit Volume 0.20 Rev/Gal
Contour Length 139.0 in. Contour Length 132.8 in. Speed Range 60-120 RPM
Eccentricity 0.201 in. Tube ID 5.500 in. No Load Pressure Loss 149 psi
Major Diameter 4.438 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.170 in. Side 1: 8.0 in. Max Pressure 553 psi - psi 830 psi - psi
Head Length 5.00 in. Side 2: 8.0 in. Max Torque 6,900 ft-lbs - ft-lbs 10,351 ft-lbs - ft-lbs
Weight 523 lbs Weight 517 lbs Stall Pressure 884 psi - psi 1,327 psi - psi
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 11,031 ft-lbs - ft-lbs 16,559 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1
2 S 4.058 -0.023 4.060 -0.025
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 148.9 Min 142 Willis: Max - Min - Alternate Stator OD: - in.
12,000 0.060
10,000 0.050
Fit Increase (in)
Torque (ft-lbs)
8,000 0.040
6,000 0.030
4,000 0.020
2,000 0.010
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
600 GPM
120
600 GPM 200
Mechanical Power (hp)
100
Speed (rpm)
60
100
300 GPM
40 300 GPM
50
20
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 82
Power Section Specification (Imperial Units) 700-7860
700-7860
7”
7" 7:8 Lobes 66 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 191.0 in. Overall Length 200.0 in. Flow Range 300-600 GPM
Avg. Diameter 4.090 in. Tube OD 7 in. Rev per Unit Volume 0.42 Rev/Gal
Contour Length 184.0 in. Contour Length 184.0 in. Speed Range 126-252 RPM
Eccentricity 0.258 in. Tube ID 5.750 in. No Load Pressure Loss 219 psi
Major Diameter 4.606 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.380 in. Side 1: 8.0 in. Max Pressure 780 psi - psi 1,170 psi - psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 4,892 ft-lbs - ft-lbs 7,339 ft-lbs - ft-lbs
Weight 705 lbs Weight 790 lbs Stall Pressure 1,248 psi - psi 1,872 psi - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 7,828 ft-lbs - ft-lbs 11,742 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.103 -0.013 4.105 -0.015
1
2
3
4 OS 4.120 -0.030 4.121 -0.031
5 1.5-OS 4.153 -0.063 4.153 -0.063
6
7
8
Reline Lengths (in.) Breen: Max 200 Min 186 Willis: Max - Min - Alternate Stator OD: - in.
9,000
0.070
8,000
0.060
7,000
Fit Increase (in)
Torque (ft-lbs)
0.050
6,000
5,000 0.040
4,000
0.030
3,000
0.020
2,000
0.010
1,000
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 0 50 100 150 200 250
350
250 600 GPM
Mechanical Power (hp)
200
250
Speed (rpm)
450 GPM
450 GPM
150 200
50
50
0 0
0 200 400 600 800 1,000 1,200 1,400 1,600 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 83
Power Section Specification (Imperial Units) 700-7875
700-7875
7”
7" 7:8
7:8Lobes
Lobes7.5
7.5Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 241.0 in. Overall Length 246.0 in. Flow Range 300-600 GPM
Avg. Diameter 4.090 in. Tube OD 7 in. Rev per Unit Volume 0.31 Rev/Gal
Contour Length 234.0 in. Contour Length 227.5 in. Speed Range 92-184 RPM
Eccentricity 0.258 in. Tube ID 5.750 in. No Load Pressure Loss 141 psi
Major Diameter 4.606 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.380 in. Side 1: 9.3 in. Max Pressure 1,093 psi 1,366 psi 1,640 psi 1,803 psi
Head Length 7.00 in. Side 2: 9.3 in. Max Torque 9,347 ft-lbs 11,684 ft-lbs 14,021 ft-lbs 15,424 ft-lbs
Weight 897 lbs Weight 966 lbs Stall Pressure 1,748 psi 2,186 psi 2,623 psi 2,885 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 14,949 ft-lbs 18,695 ft-lbs 22,433 ft-lbs 24,674 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S OS 4.096 -0.006 4.105 -0.015 4.096 -0.006 4.089 0.001 4.108 -0.018 4.090 0.000
1
2
3
4 OS 4.120 -0.030 4.110 -0.020
5
6
7
8
Reline Lengths (in.) Breen: Max 250 Min 236 Willis: Max 246 Min 234 Alternate Stator OD: - in.
16,000 0.090
0.080
14,000
0.070
12,000
Fit Increase (in)
Torque (ft-lbs)
0.060
10,000
0.050
8,000
0.040
6,000
0.030
4,000
0.020
2,000 0.010
0 0.000
0 500 1,000 1,500 2,000 2,500 0 50 100 150 200 250
180
600 GPM 500
160 600 GPM
Mechanical Power (hp)
140
400
450 GPM
Speed (rpm)
120
80 300 GPM
200
60
300 GPM
40
100
20
0 0
0 500 1,000 1,500 2,000 2,500 0 500 1,000 1,500 2,000 2,500
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 84
Power Section Specification (Imperial Units) 725-5650
725-5650
7.25”5:6
7.25" 5:6Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 171.0 in. Overall Length 178.0 in. Flow Range 300-600 GPM
Avg. Diameter 4.070 in. Tube OD 7.25 in. Rev per Unit Volume 0.32 Rev/Gal
Contour Length 164.0 in. Contour Length 163.0 in. Speed Range 95-191 RPM
Eccentricity 0.338 in. Tube ID 6.000 in. No Load Pressure Loss 121 psi
Major Diameter 4.745 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.000 in. Side 1: 7.5 in. Max Pressure 635 psi 794 psi 953 psi 1,048 psi
Head Length 7.00 in. Side 2: 7.5 in. Max Torque 5,481 ft-lbs 6,851 ft-lbs 8,222 ft-lbs 9,044 ft-lbs
Weight 629 lbs Weight 731 lbs Stall Pressure 1,016 psi 1,270 psi 1,524 psi 1,676 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 8,770 ft-lbs 10,963 ft-lbs 13,155 ft-lbs 14,467 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.050 0.020 4.024 0.046 4.035 0.035 4.016 0.054
1
2
3
4 OS 4.082 -0.012 4.077 -0.007 4.087 -0.017 4.069 0.001
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 178 Min 166 Alternate Stator OD: - in.
10,000 0.100
8,000 0.080
Fit Increase (in)
Torque (ft-lbs)
6,000 0.060
4,000 0.040
2,000 0.020
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
300
600 GPM
200
Mechanical Power (hp)
150
200
450 GPM 450 GPM
150
100
300 GPM
100
300 GPM
50
50
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 85
Power Section Specification (Imperial Units) 725-7877
725-7877
7.25” 7:8
7.25" 7:8Lobes
Lobes7.7
7.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 238.6 in. Overall Length 245.0 in. Flow Range 300-600 GPM
Avg. Diameter 4.325 in. Tube OD 7.25 in. Rev per Unit Volume 0.30 Rev/Gal
Contour Length 231.0 in. Contour Length 229.0 in. Speed Range 91-182 RPM
Eccentricity 0.269 in. Tube ID 5.875 in. No Load Pressure Loss 138 psi
Major Diameter 4.862 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.500 in. Side 1: 7.5 in. Max Pressure 1,124 psi 1,405 psi 1,686 psi 1,855 psi
Head Length 7.64 in. Side 2: 7.5 in. Max Torque 9,758 ft-lbs 12,198 ft-lbs 14,638 ft-lbs 16,102 ft-lbs
Weight 980 lbs Weight 1069 lbs Stall Pressure 1,798 psi 2,248 psi 2,697 psi 2,967 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 15,610 ft-lbs 19,517 ft-lbs 23,416 ft-lbs 25,760 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.293 0.032 4.281 0.044 4.294 0.031 4.275 0.050
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 245 Min 233 Alternate Stator OD: - in.
18,000 0.080
16,000
0.070
14,000
0.060
Fit Increase (in)
Torque (ft-lbs)
12,000
0.050
10,000
0.040
8,000
0.030
6,000
4,000 0.020
2,000 0.010
0 0.000
0 500 1,000 1,500 2,000 2,500 0 50 100 150 200 250
180
600 GPM 500
160 600 GPM
Mechanical Power (hp)
140
400
450 GPM
Speed (rpm)
120
80 300 GPM
200
60
300 GPM
40
100
20
0 0
0 500 1,000 1,500 2,000 2,500 0 500 1,000 1,500 2,000 2,500
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 86
Power Section Specification (Imperial Units) 775-6740 (A)
775-6740 (A)
7.75”6:7
7.75" 6:7Lobes
Lobes44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 130.0 in. Overall Length 138.0 in. Flow Range 300-900 GPM
Avg. Diameter 4.455 in. Tube OD 7.75 in. Rev per Unit Volume 0.28 Rev/Gal
Contour Length 122.9 in. Contour Length 122.0 in. Speed Range 84-252 RPM
Eccentricity 0.327 in. Tube ID 6.250 in. No Load Pressure Loss 156 psi
Major Diameter 5.108 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.500 in. Side 1: 8.0 in. Max Pressure 474 psi 593 psi 711 psi 782 psi
Head Length 7.10 in. Side 2: 8.0 in. Max Torque 4,556 ft-lbs 5,696 ft-lbs 6,835 ft-lbs 7,518 ft-lbs
Weight 608 lbs Weight 696 lbs Stall Pressure 758 psi 948 psi 1,137 psi 1,251 psi
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 7,287 ft-lbs 9,113 ft-lbs 10,930 ft-lbs 12,026 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.423 0.032 4.400 0.055 4.424 0.031 4.394 0.061
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 138 Min 126 Alternate Stator OD: 8 in.
8,000
0.100
7,000
6,000 0.080
Fit Increase (in)
Torque (ft-lbs)
5,000
0.060
4,000
3,000 0.040
2,000
0.020
1,000
0 0.000
0 100 200 300 400 500 600 700 800 900 0 50 100 150 200 250
350
250
900 GPM
Mechanical Power (hp)
200
250
Speed (rpm)
600 GPM
150
100
100
300 GPM
50
50
300 GPM
0 0
0 200 400 600 800 1,000 0 200 400 600 800 1,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 87
Power Section Specification (Imperial Units) 775-91030
775-91030
7.75”9:10
7.75" 9:10Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 106.0 in. Overall Length 112.0 in. Flow Range 300-600 GPM
Avg. Diameter 4.590 in. Tube OD 7.75 in. Rev per Unit Volume 0.23 Rev/Gal
Contour Length 99.3 in. Contour Length 96.0 in. Speed Range 69-138 RPM
Eccentricity 0.234 in. Tube ID 6.250 in. No Load Pressure Loss 153 psi
Major Diameter 5.058 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.750 in. Side 1: 8.0 in. Max Pressure 362 psi 453 psi 543 psi 597 psi
Head Length 6.70 in. Side 2: 8.0 in. Max Torque 3,945 ft-lbs 4,931 ft-lbs 5,917 ft-lbs 6,509 ft-lbs
Weight 521 lbs Weight 566 lbs Stall Pressure 579 psi 724 psi 868 psi 955 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 6,310 ft-lbs 7,890 ft-lbs 9,459 ft-lbs 10,408 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.570 0.020 4.553 0.037 4.562 0.028 4.549 0.041
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 112 Min 100 Alternate Stator OD: 8 in.
0.090
7,000
0.080
6,000
0.070
Fit Increase (in)
Torque (ft-lbs)
5,000
0.060
4,000 0.050
0.040
3,000
0.030
2,000
0.020
1,000
0.010
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
140 160
600 GPM
600 GPM 140
Mechanical Power (hp)
120
120
100
Speed (rpm)
450 GPM
100
80 450 GPM
80
60 300 GPM
60
40 300 GPM
40
20 20
0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 88
Power Section Specification (Imperial Units) 800-4533
800-4533
8”
8" 4:5
4:5Lobes
Lobes3.3
3.3Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 146.0 in. Overall Length 150.0 in. Flow Range 300-900 GPM
Avg. Diameter 4.040 in. Tube OD 8 in. Rev per Unit Volume 0.26 Rev/Gal
Contour Length 132.1 in. Contour Length 133.0 in. Speed Range 77-231 RPM
Eccentricity 0.408 in. Tube ID 6.140 in. No Load Pressure Loss 134 psi
Major Diameter 4.856 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.550 in. Side 1: 8.5 in. Max Pressure 346 psi 433 psi 519 psi 571 psi
Head Length 13.93 in. Side 2: 8.5 in. Max Torque 3,787 ft-lbs 4,733 ft-lbs 5,680 ft-lbs 6,248 ft-lbs
Weight 558 lbs Weight 939 lbs Stall Pressure 553 psi 692 psi 830 psi 913 psi
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 6,052 ft-lbs 7,574 ft-lbs 9,084 ft-lbs 9,993 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.019 0.021 4.001 0.039 4.017 0.023 3.992 0.048
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 228 Min 216 Alternate Stator OD: - in.
7,000
0.100
6,000
0.080
Fit Increase (in)
Torque (ft-lbs)
5,000
4,000 0.060
3,000
0.040
2,000
0.020
1,000
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
200
Speed (rpm)
150
600 GPM
150
100
300 GPM
50
50
300 GPM
0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 89
Power Section Specification (Imperial Units) 800-4536
800-4536
8”
8" 4:5
4:5Lobes
Lobes3.6
3.6Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 153.6 in. Overall Length 160.0 in. Flow Range 300-900 GPM
Avg. Diameter 4.109 in. Tube OD 8 in. Rev per Unit Volume 0.25 Rev/Gal
Contour Length 146.6 in. Contour Length 144.0 in. Speed Range 75-226 RPM
Eccentricity 0.415 in. Tube ID 6.250 in. No Load Pressure Loss 133 psi
Major Diameter 4.940 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.750 in. Side 1: 8.0 in. Max Pressure 387 psi 484 psi 581 psi 639 psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 4,339 ft-lbs 5,424 ft-lbs 6,509 ft-lbs 7,160 ft-lbs
Weight 603 lbs Weight 957 lbs Stall Pressure 619 psi 774 psi 928 psi 1,021 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 6,941 ft-lbs 8,679 ft-lbs 10,406 ft-lbs 11,449 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 4.087 0.022 4.060 0.049 4.079 0.030 4.051 0.058
0 S OS 4.108 0.001 4.127 -0.018 4.110 -0.001 4.104 0.005 4.122 -0.013 4.096 0.013
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 168 Min 154 Willis: Max 168 Min 148 Alternate Stator OD: 7.75 / 8.25 in.
8,000
0.100
7,000
6,000 0.080
Fit Increase (in)
Torque (ft-lbs)
5,000
0.060
4,000
3,000 0.040
2,000
0.020
1,000
0 0.000
0 100 200 300 400 500 600 700 800 0 50 100 150 200 250
300
900 GPM
200
Mechanical Power (hp)
900 GPM
250
Speed (rpm)
150
200
600 GPM
150
100 600 GPM
100
300 GPM
50
50
300 GPM
0 0
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 90
Power Section Specification (Imperial Units) 800-4553
800-4553
8”
8" 4:5
4:5Lobes
Lobes5.3
5.3Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 221.0 in. Overall Length 228.0 in. Flow Range 300-900 GPM
Avg. Diameter 4.109 in. Tube OD 8 in. Rev per Unit Volume 0.25 Rev/Gal
Contour Length 214.0 in. Contour Length 212.0 in. Speed Range 75-226 RPM
Eccentricity 0.415 in. Tube ID 6.250 in. No Load Pressure Loss 133 psi
Major Diameter 4.940 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.750 in. Side 1: 8.0 in. Max Pressure 633 psi 791 psi 950 psi 1,044 psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 7,094 ft-lbs 8,868 ft-lbs 10,642 ft-lbs 11,706 ft-lbs
Weight 864 lbs Weight 1366 lbs Stall Pressure 1,012 psi 1,266 psi 1,519 psi 1,671 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 11,342 ft-lbs 14,189 ft-lbs 17,025 ft-lbs 18,729 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 4.081 0.028 4.065 0.044 4.070 0.039 4.057 0.052
0 S 4.091 0.018 4.087 0.022
1
2
3
4 OS 4.130 -0.021 4.113 -0.004 4.128 -0.019 4.109 0.000
5
6
7 2-OS 4.179 -0.070 4.179 -0.070
8
Reline Lengths (in.) Breen: Max 228 Min 216 Willis: Max 228 Min 216 Alternate Stator OD: 7.75 / 8.25 in.
12,000
0.100
10,000
0.080
Fit Increase (in)
Torque (ft-lbs)
8,000
0.060
6,000
0.040
4,000
0.020
2,000
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
900 GPM
400
Speed (rpm)
150
600 GPM
300
100
600 GPM
200
300 GPM
50
100
300 GPM
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 91
Power Section Specification (Imperial Units) 800-5630
800-5630
8”
8" 5:6 Lobes 33 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 105.0 in. Overall Length 111.6 in. Flow Range 500-900 GPM
Avg. Diameter 4.102 in. Tube OD 8 in. Rev per Unit Volume 0.19 Rev/Gal
Contour Length 98.0 in. Contour Length 96.6 in. Speed Range 96-174 RPM
Eccentricity 0.382 in. Tube ID 6.250 in. No Load Pressure Loss 196 psi
Major Diameter 4.865 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.750 in. Side 1: 8.0 in. Max Pressure 287 psi - psi 431 psi - psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 4,082 ft-lbs - ft-lbs 6,123 ft-lbs - ft-lbs
Weight 387 lbs Weight 634 lbs Stall Pressure 459 psi - psi 688 psi - psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 6,528 ft-lbs - ft-lbs 9,786 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.102 0.000 4.096 0.006
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 111.6 Min 99.6 Willis: Max - Min - Alternate Stator OD: - in.
0.090
7,000
0.080
6,000
0.070
Fit Increase (in)
Torque (ft-lbs)
5,000
0.060
4,000 0.050
0.040
3,000
0.030
2,000
0.020
1,000
0.010
0 0.000
0 100 200 300 400 500 600 0 50 100 150 200 250
180
140
700 GPM
Speed (rpm)
120 150
500 GPM
80 100
60 500 GPM
40 50
20
0 0
0 100 200 300 400 500 600 0 100 200 300 400 500 600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 92
Power Section Specification (Imperial Units) 800-5650
800-5650
8”
8" 5:6 Lobes 55 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 162.0 in. Overall Length 168.0 in. Flow Range 500-900 GPM
Avg. Diameter 4.102 in. Tube OD 8 in. Rev per Unit Volume 0.19 Rev/Gal
Contour Length 155.0 in. Contour Length 152.0 in. Speed Range 96-174 RPM
Eccentricity 0.382 in. Tube ID 6.250 in. No Load Pressure Loss 196 psi
Major Diameter 4.865 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.750 in. Side 1: 8.0 in. Max Pressure 563 psi - psi 845 psi - psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 8,008 ft-lbs - ft-lbs 12,012 ft-lbs - ft-lbs
Weight 592 lbs Weight 956 lbs Stall Pressure 900 psi - psi 1,351 psi - psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 12,801 ft-lbs - ft-lbs 19,217 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.102 0.000 4.096 0.006
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 168 Min 156 Willis: Max - Min - Alternate Stator OD: 7.75 in.
0.090
14,000
0.080
12,000
0.070
Fit Increase (in)
Torque (ft-lbs)
10,000
0.060
8,000 0.050
0.040
6,000
0.030
4,000
0.020
2,000
0.010
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
180 400
900 GPM
160 900 GPM 350
Mechanical Power (hp)
140
300
700 GPM
Speed (rpm)
120
250 700 GPM
100
500 GPM 200
80
150 500 GPM
60
40 100
20 50
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 93
Power Section Specification (Imperial Units) 800-6740 (B)
800-6740 (B)
8”
8" 6:7 Lobes 44 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 199.0 in. Overall Length 206.0 in. Flow Range 300-900 GPM
Avg. Diameter 4.286 in. Tube OD 8 in. Rev per Unit Volume 0.15 Rev/Gal
Contour Length 192.0 in. Contour Length 190.0 in. Speed Range 45-137 RPM
Eccentricity 0.336 in. Tube ID 6.250 in. No Load Pressure Loss 140 psi
Major Diameter 4.958 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.750 in. Side 1: 8.0 in. Max Pressure 494 psi 618 psi 741 psi 815 psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 8,742 ft-lbs 10,928 ft-lbs 13,114 ft-lbs 14,425 ft-lbs
Weight 989 lbs Weight 1206 lbs Stall Pressure 790 psi 988 psi 1,185 psi 1,304 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 13,981 ft-lbs 17,485 ft-lbs 20,972 ft-lbs 23,078 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T US 4.268 0.018 4.268 0.018
0 S OS 4.290 -0.005 4.284 0.002 4.269 0.016 4.288 -0.003 4.278 0.008 4.265 0.021
1
2
3
4 OS 4.317 -0.032 4.318 -0.032
5
6
7
8
Reline Lengths (in.) Breen: Max 206.1 Min 191.9 Willis: Max 206 Min 194 Alternate Stator OD: 7.75 in.
16,000
0.100
14,000
12,000 0.080
Fit Increase (in)
Torque (ft-lbs)
10,000
0.060
8,000
6,000 0.040
4,000
0.020
2,000
0 0.000
0 200 400 600 800 1,000 0 50 100 150 200 250
140 350
900 GPM
900 GPM
Mechanical Power (hp)
120 300
100 250
Speed (rpm)
40 100
300 GPM
20 50
300 GPM
0 0
0 200 400 600 800 1,000 0 200 400 600 800 1,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 94
Power Section Specification (Imperial Units) 800-6750
800-6750
8”
8" 6:7 Lobes 55 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 244.0 in. Overall Length 250.0 in. Flow Range 300-900 GPM
Avg. Diameter 4.285 in. Tube OD 8 in. Rev per Unit Volume 0.11 Rev/Gal
Contour Length 237.0 in. Contour Length 234.0 in. Speed Range 31-95 RPM
Eccentricity 0.336 in. Tube ID 6.250 in. No Load Pressure Loss 239 psi
Major Diameter 4.958 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.750 in. Side 1: 8.0 in. Max Pressure 543 psi - psi 815 psi - psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 13,760 ft-lbs - ft-lbs 20,640 ft-lbs - ft-lbs
Weight 971 lbs Weight 1418 lbs Stall Pressure 868 psi - psi 1,303 psi - psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 21,996 ft-lbs - ft-lbs 33,019 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.289 -0.004 4.286 -0.001
1
2
3
4
5
6
7 2-OS 4.359 -0.074 4.359 -0.074
8
Reline Lengths (in.) Breen: Max 250.1 Min 236.3 Willis: Max - Min - Alternate Stator OD: - in.
0.180
25,000
0.160
0.140
20,000
Fit Increase (in)
Torque (ft-lbs)
0.120
15,000 0.100
0.080
10,000
0.060
0.040
5,000
0.020
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
900 GPM
350
100
Mechanical Power (hp)
300
900 GPM
80
250
Speed (rpm)
60 200
600 GPM 600 GPM
150
40
100
300 GPM
20
50 300 GPM
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 95
Power Section Specification (Imperial Units) 800-7820
800-7820
8”
8" 7:8 Lobes 22 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 153.6 in. Overall Length 168.0 in. Flow Range 300-900 GPM
Avg. Diameter 4.345 in. Tube OD 8 in. Rev per Unit Volume 0.06 Rev/Gal
Contour Length 146.6 in. Contour Length 152.0 in. Speed Range 16-50 RPM
Eccentricity 0.286 in. Tube ID 6.250 in. No Load Pressure Loss 144 psi
Major Diameter 4.918 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.750 in. Side 1: 8.0 in. Max Pressure 204 psi - psi 306 psi - psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 9,516 ft-lbs - ft-lbs 14,274 ft-lbs - ft-lbs
Weight 646 lbs Weight 828 lbs Stall Pressure 326 psi - psi 489 psi - psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 15,207 ft-lbs - ft-lbs 22,811 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 4.355 -0.010 4.348 -0.003
1
2
3
4 OS 4.376 -0.031 4.376 -0.031
5
6
7
8
Reline Lengths (in.) Breen: Max 168 Min 154 Willis: Max Min Alternate Stator OD: 7.75 in.
16,000 0.080
14,000 0.070
12,000 0.060
Fit Increase (in)
Torque (ft-lbs)
10,000 0.050
8,000 0.040
6,000 0.030
4,000 0.020
2,000 0.010
0 0.000
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250
140
50 900 GPM
Mechanical Power (hp)
900 GPM
120
40
100
Speed (rpm)
30 600 GPM 80
600 GPM
60
20
40
300 GPM
10
20
300 GPM
0 0
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 96
Power Section Specification (Imperial Units) 800-7830
800-7830
8”
8" 7:8 Lobes 33 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 153.6 in. Overall Length 160.0 in. Flow Range 300-900 GPM
Avg. Diameter 4.609 in. Tube OD 8 in. Rev per Unit Volume 0.16 Rev/Gal
Contour Length 146.6 in. Contour Length 144.0 in. Speed Range 48-146 RPM
Eccentricity 0.288 in. Tube ID 6.250 in. No Load Pressure Loss 164 psi
Major Diameter 5.186 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.750 in. Side 1: 8.0 in. Max Pressure 327 psi 409 psi 491 psi 540 psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 5,285 ft-lbs 6,607 ft-lbs 7,928 ft-lbs 8,721 ft-lbs
Weight 740 lbs Weight 943 lbs Stall Pressure 523 psi 654 psi 784 psi 863 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 8,454 ft-lbs 10,571 ft-lbs 12,673 ft-lbs 13,950 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 4.574 0.035 4.562 0.047 4.565 0.044 4.552 0.057
0 S OS 4.592 0.017 4.609 0.000 4.596 0.013 4.587 0.022 4.605 0.004 4.589 0.020
1
2
3
4 OS 4.646 -0.037 4.637 -0.028
5
6
7
8
Reline Lengths (in.) Breen: Max 168 Min 154 Willis: Max 168 Min 148 Alternate Stator OD: 7.75 / 8.25 in.
9,000 0.090
8,000 0.080
7,000 0.070
Fit Increase (in)
Torque (ft-lbs)
6,000 0.060
5,000 0.050
4,000 0.040
3,000 0.030
2,000 0.020
1,000 0.010
0 0.000
0 100 200 300 400 500 600 700 0 50 100 150 200 250
140
900 GPM 900 GPM
200
Mechanical Power (hp)
120
100
Speed (rpm)
150
600 GPM
80
600 GPM
100
60
40 300 GPM
50
20
300 GPM
0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 97
Power Section Specification (Imperial Units) 800-7840
800-7840
8”
8" 7:8 Lobes 44 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 196.5 in. Overall Length 203.2 in. Flow Range 300-900 GPM
Avg. Diameter 4.609 in. Tube OD 8 in. Rev per Unit Volume 0.16 Rev/Gal
Contour Length 189.5 in. Contour Length 187.2 in. Speed Range 48-146 RPM
Eccentricity 0.288 in. Tube ID 6.250 in. No Load Pressure Loss 164 psi
Major Diameter 5.186 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.750 in. Side 1: 8.0 in. Max Pressure 475 psi 594 psi 713 psi 784 psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 7,693 ft-lbs 9,616 ft-lbs 11,539 ft-lbs 12,693 ft-lbs
Weight 947 lbs Weight 1200 lbs Stall Pressure 760 psi 950 psi 1,140 psi 1,254 psi
Thread Form 3 1/2" API IF / Reg Material Alloy Steel Stall Torque 12,308 ft-lbs 15,386 ft-lbs 18,463 ft-lbs 20,309 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 4.574 0.035 4.562 0.047 4.568 0.041 4.554 0.055
0 S 4.586 0.023 4.581 0.028
1
2 0.5-OS OS 4.626 -0.017 4.609 0.000 4.597 0.012 4.610 -0.001 4.602 0.007 4.595 0.014
3
4 OS 4.638 -0.029 4.633 -0.024
5
6
7
8
Reline Lengths (in.) Breen: Max 206 Min 194 Willis: Max 209 Min 191.2 Alternate Stator OD: 7.75 in.
0.090
14,000
0.080
12,000
0.070
Fit Increase (in)
Torque (ft-lbs)
10,000
0.060
8,000 0.050
0.040
6,000
0.030
4,000
0.020
2,000
0.010
0 0.000
0 100 200 300 400 500 600 700 800 900 0 50 100 150 200 250
140 350
900 GPM
Mechanical Power (hp)
900 GPM
120 300
100 250
Speed (rpm)
600 GPM
80 200
600 GPM
60 150
20 50
300 GPM
0 0
0 200 400 600 800 1,000 0 200 400 600 800 1,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 98
Power Section Specification (Imperial Units) 800-91027
800-91027
8”8"9:10
9:10Lobes
Lobes2.7 Stages
2.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 262.0 in. Overall Length 270.0 in. Flow Range 300-900 GPM
Avg. Diameter 4.786 in. Tube OD 8 in. Rev per Unit Volume 0.04 Rev/Gal
Contour Length 254.5 in. Contour Length 254.0 in. Speed Range 13-40 RPM
Eccentricity 0.240 in. Tube ID 6.250 in. No Load Pressure Loss 336 psi
Major Diameter 5.265 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 4.850 in. Side 1: 8.0 in. Max Pressure 144 psi - psi 216 psi - psi
Head Length 7.50 in. Side 2: 8.0 in. Max Torque 8,121 ft-lbs - ft-lbs 12,182 ft-lbs - ft-lbs
Weight 1350 lbs Weight 1575 lbs Stall Pressure 230 psi - psi 345 psi - psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 12,971 ft-lbs - ft-lbs 19,457 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T US 4.756 0.029 4.756 0.029
0 S 4.776 0.010 4.775 0.010
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 270 Min 260 Willis: Max - Min - Alternate Stator OD: - in.
14,000
0.060
12,000
0.050
Fit Increase (in)
Torque (ft-lbs)
10,000
0.040
8,000
0.030
6,000
0.020
4,000
2,000 0.010
0 0.000
0 50 100 150 200 250 300 0 50 100 150 200 250
40 90 900 GPM
900 GPM 80
35
Mechanical Power (hp)
70
30
Speed (rpm)
60
25
600 GPM
50
600 GPM
20
40
15
30
10 300 GPM
20
5 10 300 GPM
0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 99
Power Section Specification (Imperial Units) 962-2375
962-2375
9.62” 2:3
9.62" 2:3Lobes
Lobes7.5
7.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 202.0 in. Overall Length 208.0 in. Flow Range 600-1200 GPM
Avg. Diameter 5.295 in. Tube OD 9.62 in. Rev per Unit Volume 0.48 Rev/Gal
Contour Length 193.0 in. Contour Length 190.0 in. Speed Range 287-574 RPM
Eccentricity 0.486 in. Tube ID 7.880 in. No Load Pressure Loss 205 psi
Major Diameter 6.268 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 5.500 in. Side 1: 9.0 in. Max Pressure 773 psi - psi 1,160 psi - psi
Head Length 9.00 in. Side 2: 9.0 in. Max Torque 4,748 ft-lbs - ft-lbs 7,122 ft-lbs - ft-lbs
Weight 1321 lbs Weight 1512 lbs Stall Pressure 1,236 psi - psi 1,855 psi - psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 7,592 ft-lbs - ft-lbs 11,395 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1
2 S 5.295 0.000 5.306 -0.011
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 208 Min 194 Willis: Max - Min - Alternate Stator OD: - in.
8,000
0.100
7,000
6,000 0.080
Fit Increase (in)
Torque (ft-lbs)
5,000
0.060
4,000
3,000 0.040
2,000
0.020
1,000
0 0.000
0 200 400 600 800 1,000 1,200 1,400 1,600 0 50 100 150 200 250
500
Speed (rpm)
900 GPM
400
900 GPM
400
300
300
600 GPM
200 600 GPM
200
100
100
0 0
0 200 400 600 800 1,000 1,200 1,400 1,600 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 100
Power Section Specification (Imperial Units) 962-3445
962-3445
9.62” 3:4
9.62" 3:4Lobes
Lobes4.5
4.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 167.0 in. Overall Length 178.0 in. Flow Range 600-1200 GPM
Avg. Diameter 4.779 in. Tube OD 9.62 in. Rev per Unit Volume 0.23 Rev/Gal
Contour Length 160.0 in. Contour Length 158.0 in. Speed Range 135-270 RPM
Eccentricity 0.599 in. Tube ID 7.875 in. No Load Pressure Loss 145 psi
Major Diameter 5.978 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 5.500 in. Side 1: 10.0 in. Max Pressure 478 psi 598 psi 717 psi 789 psi
Head Length 7.00 in. Side 2: 10.0 in. Max Torque 6,107 ft-lbs 7,634 ft-lbs 9,161 ft-lbs 10,077 ft-lbs
Weight 874 lbs Weight 1351 lbs Stall Pressure 764 psi 956 psi 1,147 psi 1,261 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 9,761 ft-lbs 12,214 ft-lbs 14,655 ft-lbs 16,111 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 4.769 0.010 4.740 0.039 4.770 0.009 4.729 0.050
0 OS 4.800 -0.021 4.772 0.007 4.796 -0.017 4.761 0.018
1
2
3
4 OS 2-OS 4.822 -0.043 4.809 -0.030 4.797 -0.018 4.822 -0.043 4.822 -0.043 4.786 -0.007
5
6
7
8
Reline Lengths (in.) Breen: Max 178 Min 166 Willis: Max 178 Min 166 Alternate Stator OD: 9.5 in.
0.160
10,000
0.140
8,000 0.120
Fit Increase (in)
Torque (ft-lbs)
0.100
6,000
0.080
4,000 0.060
0.040
2,000
0.020
0 0.000
0 100 200 300 400 500 600 700 800 900 0 50 100 150 200 250
1200 GPM
200 400
Speed (rpm)
900 GPM
150 300
900 GPM
600 GPM
100 200
600 GPM
50 100
0 0
0 200 400 600 800 1,000 0 200 400 600 800 1,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 101
Power Section Specification (Imperial Units) 962-3460
962-3460
9.62”3:4
9.62" 3:4Lobes
Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 219.0 in. Overall Length 228.0 in. Flow Range 600-1200 GPM
Avg. Diameter 4.779 in. Tube OD 9.62 in. Rev per Unit Volume 0.23 Rev/Gal
Contour Length 212.0 in. Contour Length 210.0 in. Speed Range 135-271 RPM
Eccentricity 0.599 in. Tube ID 7.850 in. No Load Pressure Loss 146 psi
Major Diameter 5.978 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 5.500 in. Side 1: 9.0 in. Max Pressure 682 psi 853 psi 1,023 psi 1,125 psi
Head Length 7.00 in. Side 2: 9.0 in. Max Torque 8,676 ft-lbs 10,845 ft-lbs 13,015 ft-lbs 14,316 ft-lbs
Weight 1142 lbs Weight 1754 lbs Stall Pressure 1,091 psi 1,364 psi 1,636 psi 1,800 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 13,880 ft-lbs 17,353 ft-lbs 20,813 ft-lbs 22,900 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 4.766 0.013 4.758 0.021 4.737 0.042 4.755 0.024 4.757 0.022 4.721 0.058
1
2
3
4 OS OS 4.821 -0.042 4.815 -0.036 4.795 -0.016 4.808 -0.029 4.821 -0.042 4.786 -0.007
5
6
7
8
Reline Lengths (in.) Breen: Max 228 Min 214 Willis: Max 228 Min 216 Alternate Stator OD: - in.
16,000 0.160
14,000 0.140
12,000 0.120
Fit Increase (in)
Torque (ft-lbs)
10,000 0.100
8,000 0.080
6,000 0.060
4,000 0.040
2,000 0.020
0 0.000
0 200 400 600 800 1,000 1,200 1,400 0 50 100 150 200 250
700
250 1200 GPM
1200 GPM
Mechanical Power (hp)
600
200
900 GPM 500
Speed (rpm)
50
100
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 102
Power Section Specification (Imperial Units) 962-4556
962-4556
9.62” 4:5
9.62" 4:5Lobes
Lobes5.6
5.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 143.5 in. Overall Length 154.0 in. Flow Range 500-1100 GPM
Avg. Diameter 5.277 in. Tube OD 9.62 in. Rev per Unit Volume 0.25 Rev/Gal
Contour Length 134.3 in. Contour Length 134.0 in. Speed Range 123-272 RPM
Eccentricity 0.532 in. Tube ID 7.875 in. No Load Pressure Loss 141 psi
Major Diameter 6.341 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 5.500 in. Side 1: 10.0 in. Max Pressure 682 psi 853 psi 1,023 psi 1,125 psi
Head Length 9.19 in. Side 2: 10.0 in. Max Torque 7,752 ft-lbs 9,691 ft-lbs 11,629 ft-lbs 12,792 ft-lbs
Weight 917 lbs Weight 1142 lbs Stall Pressure 1,091 psi 1,364 psi 1,636 psi 1,800 psi
Thread Form 3 1/2" API FH Material Alloy Steel Stall Torque 12,402 ft-lbs 15,505 ft-lbs 18,597 ft-lbs 20,462 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 5.305 -0.028 5.278 -0.001 5.307 -0.031 5.270 0.007
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 154 Min 142 Alternate Stator OD: - in.
14,000 0.140
12,000 0.120
Fit Increase (in)
Torque (ft-lbs)
10,000 0.100
8,000 0.080
6,000 0.060
4,000 0.040
2,000 0.020
0 0.000
0 200 400 600 800 1,000 1,200 1,400 0 50 100 150 200 250
600
250 1100 GPM 1100 GPM
Mechanical Power (hp)
500
200
Speed (rpm)
800 GPM
400
150 800 GPM
300
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 103
Power Section Specification (Imperial Units) 962-5630
962-5630
9.62”5:6
9.62" 5:6Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 167.0 in. Overall Length 178.0 in. Flow Range 600-1200 GPM
Avg. Diameter 5.341 in. Tube OD 9.62 in. Rev per Unit Volume 0.11 Rev/Gal
Contour Length 158.6 in. Contour Length 158.0 in. Speed Range 66-133 RPM
Eccentricity 0.448 in. Tube ID 7.875 in. No Load Pressure Loss 159 psi
Major Diameter 6.236 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 5.500 in. Side 1: 10.0 in. Max Pressure 295 psi 369 psi 443 psi 487 psi
Head Length 8.40 in. Side 2: 10.0 in. Max Torque 7,329 ft-lbs 9,161 ft-lbs 10,993 ft-lbs 12,093 ft-lbs
Weight 1087 lbs Weight 1328 lbs Stall Pressure 472 psi 590 psi 708 psi 778 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 11,726 ft-lbs 14,658 ft-lbs 17,590 ft-lbs 19,329 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 5.309 0.032 5.289 0.052 5.305 0.036 5.277 0.064
0 S OS 5.331 0.010 5.358 -0.017 5.331 0.010 5.324 0.017 5.374 -0.033 5.324 0.017
1
2
3
4 OS 5.358 -0.017 5.358 -0.017
5
6
7
8
Reline Lengths (in.) Breen: Max 178 Min 164 Willis: Max 178 Min 166 Alternate Stator OD: 9.50 / 11.25 in.
12,000 0.120
10,000 0.100
Fit Increase (in)
Torque (ft-lbs)
8,000 0.080
6,000 0.060
4,000 0.040
2,000 0.020
0 0.000
0 100 200 300 400 500 600 0 50 100 150 200 250
1200 GPM
100 250
900 GPM
Speed (rpm)
80 200
900 GPM
60 600 GPM 150
40 100
600 GPM
20 50
0 0
0 100 200 300 400 500 600 0 100 200 300 400 500 600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 104
Power Section Specification (Imperial Units) 962-5640
962-5640
9.62”5:6
9.62" 5:6Lobes
Lobes44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 219.5 in. Overall Length 228.0 in. Flow Range 600-1200 GPM
Avg. Diameter 5.276 in. Tube OD 9.62 in. Rev per Unit Volume 0.10 Rev/Gal
Contour Length 212.5 in. Contour Length 210.0 in. Speed Range 61-123 RPM
Eccentricity 0.450 in. Tube ID 7.875 in. No Load Pressure Loss 161 psi
Major Diameter 6.176 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 5.500 in. Side 1: 9.0 in. Max Pressure 443 psi 554 psi 665 psi 731 psi
Head Length 7.00 in. Side 2: 9.0 in. Max Torque 11,847 ft-lbs 14,809 ft-lbs 17,771 ft-lbs 19,548 ft-lbs
Weight 1436 lbs Weight 1706 lbs Stall Pressure 708 psi 886 psi 1,063 psi 1,169 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 18,934 ft-lbs 23,694 ft-lbs 28,428 ft-lbs 31,263 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 5.263 0.013 5.255 0.021
1
2 S 5.304 -0.028 5.281 -0.005 5.306 -0.030 5.271 0.005
3
4 OS 5.360 -0.084 5.344 -0.068 5.374 -0.098 5.328 -0.052
5
6
7 2-OS 5.394 -0.118 5.365 -0.089 5.394 -0.118 5.357 -0.081
8
Reline Lengths (in.) Breen: Max 228.1 Min 214.1 Willis: Max 228 Min 216 Alternate Stator OD: 11.25 in.
0.120
20,000
0.100
Fit Increase (in)
Torque (ft-lbs)
15,000
0.080
0.060
10,000
0.040
5,000
0.020
0 0.000
0 100 200 300 400 500 600 700 800 900 0 50 100 150 200 250
450
120
1200 GPM 400 1200 GPM
Mechanical Power (hp)
100 350
Speed (rpm)
40 150
600 GPM
100
20
50
0 0
0 200 400 600 800 1,000 0 100 200 300 400 500 600 700 800 900
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 105
Power Section Specification (Imperial Units) 962-6730
962-6730
9.62”6:7
9.62" 6:7Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 148.0 in. Overall Length 155.5 in. Flow Range 600-1200 GPM
Avg. Diameter 5.659 in. Tube OD 9.62 in. Rev per Unit Volume 0.16 Rev/Gal
Contour Length 141.0 in. Contour Length 139.5 in. Speed Range 98-197 RPM
Eccentricity 0.404 in. Tube ID 7.880 in. No Load Pressure Loss 213 psi
Major Diameter 6.466 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 5.500 in. Side 1: 8.0 in. Max Pressure 322 psi - psi 483 psi - psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 5,272 ft-lbs - ft-lbs 7,908 ft-lbs - ft-lbs
Weight 1034 lbs Weight 1242 lbs Stall Pressure 515 psi - psi 772 psi - psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 8,432 ft-lbs - ft-lbs 12,639 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 5.655 0.004 5.655 0.004
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 155.5 Min 147.7 Willis: Max - Min - Alternate Stator OD: - in.
9,000 0.090
8,000 0.080
7,000 0.070
Fit Increase (in)
Torque (ft-lbs)
6,000 0.060
5,000 0.050
4,000 0.040
3,000 0.030
2,000 0.020
1,000 0.010
0 0.000
0 100 200 300 400 500 600 0 50 100 150 200 250
300
200 1200 GPM
Mechanical Power (hp)
150
200
900 GPM 900 GPM
150
100
600 GPM
100
600 GPM
50
50
0 0
0 100 200 300 400 500 600 0 100 200 300 400 500 600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 106
Power Section Specification (Imperial Units) 962-6750
962-6750
9.62”6:7
9.62" 6:7Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 202.0 in. Overall Length 218.0 in. Flow Range 600-1200 GPM
Avg. Diameter 5.548 in. Tube OD 9.62 in. Rev per Unit Volume 0.13 Rev/Gal
Contour Length 195.0 in. Contour Length 202.0 in. Speed Range 76-153 RPM
Eccentricity 0.428 in. Tube ID 7.852 in. No Load Pressure Loss 160 psi
Major Diameter 6.403 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 5.750 in. Side 1: 8.0 in. Max Pressure 675 psi 844 psi 1,013 psi 1,114 psi
Head Length 7.00 in. Side 2: 8.0 in. Max Torque 14,251 ft-lbs 17,814 ft-lbs 21,377 ft-lbs 23,515 ft-lbs
Weight 1369 lbs Weight 1642 lbs Stall Pressure 1,080 psi 1,350 psi 1,620 psi 1,782 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 22,802 ft-lbs 28,503 ft-lbs 34,204 ft-lbs 37,624 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 5.552 -0.004 5.543 0.005 5.524 0.024 5.544 0.004 5.544 0.004 5.514 0.034
1
2
3
4 OS 5.580 -0.032 5.575 -0.027
5
6
7
8
Reline Lengths (in.) Breen: Max 208 Min 194 Willis: Max 218 Min 206 Alternate Stator OD: 11.25 in.
0.120
25,000
0.100
20,000
Fit Increase (in)
Torque (ft-lbs)
0.080
15,000
0.060
10,000
0.040
5,000
0.020
0 0.000
0 200 400 600 800 1,000 1,200 1,400 0 50 100 150 200 250
160
600 1200 GPM
140 1200 GPM
Mechanical Power (hp)
500
120
Speed (rpm)
80
300
600 GPM
60
200 600 GPM
40
100
20
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 107
Power Section Specification (Imperial Units) 962-6760
962-6760
9.62”6:7
9.62" 6:7Lobes
Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 240.0 in. Overall Length 250.0 in. Flow Range 600-1200 GPM
Avg. Diameter 5.548 in. Tube OD 9.62 in. Rev per Unit Volume 0.16 Rev/Gal
Contour Length 233.0 in. Contour Length 232.0 in. Speed Range 97-195 RPM
Eccentricity 0.428 in. Tube ID 7.880 in. No Load Pressure Loss 249 psi
Major Diameter 6.403 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 5.500 in. Side 1: 9.0 in. Max Pressure 709 psi - psi 1,064 psi - psi
Head Length 7.00 in. Side 2: 9.0 in. Max Torque 11,721 ft-lbs - ft-lbs 17,581 ft-lbs - ft-lbs
Weight 1612 lbs Weight 2030 lbs Stall Pressure 1,134 psi - psi 1,701 psi - psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 18,747 ft-lbs - ft-lbs 28,121 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 5.548 0.000 5.539 0.009
1
2
3
4 OS 5.592 -0.044 5.592 -0.044
5
6
7
8
Reline Lengths (in.) Breen: Max 250 Min 236 Willis: Max - Min - Alternate Stator OD: 11.25 in.
0.100
20,000
0.080
Fit Increase (in)
Torque (ft-lbs)
15,000
0.060
10,000
0.040
5,000
0.020
0 0.000
0 200 400 600 800 1,000 1,200 1,400 0 50 100 150 200 250
1200 GPM
600
200
Mechanical Power (hp)
150
400 900 GPM
900 GPM
300
100
600 GPM
200 600 GPM
50
100
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 108
Power Section Specification (Imperial Units) 962-7848 (B)
962-7848 (B)
9.62” 7:8
9.62" 7:8Lobes
Lobes4.8
4.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 233.5 in. Overall Length 246.5 in. Flow Range 600-1200 GPM
Avg. Diameter 5.692 in. Tube OD 9.62 in. Rev per Unit Volume 0.12 Rev/Gal
Contour Length 225.6 in. Contour Length 226.5 in. Speed Range 69-139 RPM
Eccentricity 0.353 in. Tube ID 7.852 in. No Load Pressure Loss 194 psi
Major Diameter 6.397 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 6.000 in. Side 1: 10.0 in. Max Pressure 601 psi 751 psi 902 psi 992 psi
Head Length 7.93 in. Side 2: 10.0 in. Max Torque 13,651 ft-lbs 17,063 ft-lbs 20,476 ft-lbs 22,524 ft-lbs
Weight 1662 lbs Weight 1853 lbs Stall Pressure 961 psi 1,202 psi 1,442 psi 1,586 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 21,828 ft-lbs 27,302 ft-lbs 32,753 ft-lbs 36,024 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 5.636 0.055 5.619 0.072 5.635 0.056 5.610 0.081
1
2
3
4 OS 5.658 0.033 5.641 0.050 5.656 0.035 5.639 0.052
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 246.5 Min 234.5 Alternate Stator OD: 11.25 in.
0.120
25,000
0.100
20,000
Fit Increase (in)
Torque (ft-lbs)
0.080
15,000
0.060
10,000
0.040
5,000
0.020
0 0.000
0 200 400 600 800 1,000 1,200 0 50 100 150 200 250
120
400
100
Speed (rpm)
900 GPM
900 GPM
80 300
60 600 GPM
200
600 GPM
40
100
20
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 109
Power Section Specification (Imperial Units) 962-7857
962-7857
9.62” 7:8
9.62" 7:8Lobes
Lobes5.7
5.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 230.9 in. Overall Length 240.0 in. Flow Range 600-1200 GPM
Avg. Diameter 5.665 in. Tube OD 9.62 in. Rev per Unit Volume 0.12 Rev/Gal
Contour Length 222.0 in. Contour Length 220.0 in. Speed Range 74-149 RPM
Eccentricity 0.354 in. Tube ID 7.852 in. No Load Pressure Loss 177 psi
Major Diameter 6.373 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 5.500 in. Side 1: 10.0 in. Max Pressure 736 psi 920 psi 1,104 psi 1,214 psi
Head Length 8.88 in. Side 2: 10.0 in. Max Torque 15,551 ft-lbs 19,439 ft-lbs 23,327 ft-lbs 25,660 ft-lbs
Weight 1656 lbs Weight 1800 lbs Stall Pressure 1,177 psi 1,472 psi 1,766 psi 1,943 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 24,870 ft-lbs 31,103 ft-lbs 37,315 ft-lbs 41,056 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 5.656 0.009 5.640 0.025 5.656 0.009 5.633 0.032
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 240 Min 228 Alternate Stator OD: 11.25 in.
0.120
25,000
0.100
20,000
Fit Increase (in)
Torque (ft-lbs)
0.080
15,000
0.060
10,000
0.040
5,000
0.020
0 0.000
0 200 400 600 800 1,000 1,200 1,400 0 50 100 150 200 250
120 600
600 GPM
60 300
20 100
0 0
0 200 400 600 800 1,000 1,200 1,400 1,600 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 110
Power Section Specification (Imperial Units) 1125-3436
1125-3436
11.25”3:4
11.25" 3:4Lobes
Lobes3.6
3.6Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 192.5 in. Overall Length 201.0 in. Flow Range 1000-1500 GPM
Avg. Diameter 5.574 in. Tube OD 11.25 in. Rev per Unit Volume 0.12 Rev/Gal
Contour Length 182.6 in. Contour Length 180.0 in. Speed Range 117-175 RPM
Eccentricity 0.697 in. Tube ID 9.250 in. No Load Pressure Loss 173 psi
Major Diameter 6.968 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 6.500 in. Side 1: 10.5 in. Max Pressure 323 psi 404 psi 485 psi 533 psi
Head Length 9.90 in. Side 2: 10.5 in. Max Torque 7,942 ft-lbs 9,928 ft-lbs 11,914 ft-lbs 13,105 ft-lbs
Weight 1374 lbs Weight 2056 lbs Stall Pressure 516 psi 646 psi 775 psi 852 psi
Thread Form 4 1/2" API Reg Material Alloy Steel Stall Torque 12,688 ft-lbs 15,885 ft-lbs 19,057 ft-lbs 20,951 ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 5.517 0.056 5.489 0.085 5.525 0.048 5.468 0.106
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max - Min - Willis: Max 201 Min 189 Alternate Stator OD: 11.5 in.
14,000
0.200
12,000
Fit Increase (in)
Torque (ft-lbs)
10,000
0.150
8,000
0.100
6,000
4,000
0.050
2,000
0 0.000
0 100 200 300 400 500 600 0 50 100 150 200 250
180 400
1500 GPM
160 1500 GPM
350
Mechanical Power (hp)
140
1250 GPM 300
1250 GPM
Speed (rpm)
120
250
1000 GPM
100
200 1000 GPM
80
150
60
40 100
20 50
0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 111
Power Section Specification (Imperial Units) 1125-6755
1125-3436
11.25”6:7
11.25" 6:7Lobes
Lobes5.5
5.5Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 240.0 in. Overall Length 250.0 in. Flow Range 900-1800 GPM
Avg. Diameter 6.709 in. Tube OD 11.25 in. Rev per Unit Volume 0.06 Rev/Gal
Contour Length 230.0 in. Contour Length 229.0 in. Speed Range 56-112 RPM
Eccentricity 0.487 in. Tube ID 9.250 in. No Load Pressure Loss 619 psi
Major Diameter 7.683 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 6.500 in. Side 1: 10.5 in. Max Pressure 275 psi - psi 413 psi - psi
Head Length 10.00 in. Side 2: 10.5 in. Max Torque 11,862 ft-lbs - ft-lbs 17,793 ft-lbs - ft-lbs
Weight 2386 lbs Weight 2468 lbs Stall Pressure 440 psi - psi 660 psi - psi
Thread Form 62C0013 Material Alloy Steel Stall Torque 18,979 ft-lbs - ft-lbs 28,469 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 6.689 0.020 6.685 0.024
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 250 Min 238 Willis: Max - Min - Alternate Stator OD: - in.
0.400
20,000
0.350
0.300
Fit Increase (in)
Torque (ft-lbs)
15,000
0.250
0.200
10,000
0.150
0.100
5,000
0.050
0 0.000
0 100 200 300 400 500 600 0 50 100 150 200 250
1800 GPM
1800 GPM 350
100
Mechanical Power (hp)
300
80
1350 GPM 250
Speed (rpm)
1350 GPM
60 200
900 GPM
150
40
900 GPM
100
20
50
0 0
0 100 200 300 400 500 600 0 100 200 300 400 500 600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 112
Power Section Specification (Imperial Units) 1125-6756
1125-6756
11.25”6:7
11.25" 6:7Lobes
Lobes5.6
5.6Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 242.0 in. Overall Length 250.0 in. Flow Range 1000-1800 GPM
Avg. Diameter 6.599 in. Tube OD 11.25 in. Rev per Unit Volume 0.06 Rev/Gal
Contour Length 232.5 in. Contour Length 229.0 in. Speed Range 60-109 RPM
Eccentricity 0.506 in. Tube ID 9.250 in. No Load Pressure Loss 834 psi
Major Diameter 7.612 in. Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 6.500 in. Side 1: 10.5 in. Max Pressure 63 psi - psi 95 psi - psi
Head Length 9.53 in. Side 2: 10.5 in. Max Torque 2,785 ft-lbs - ft-lbs 4,178 ft-lbs - ft-lbs
Weight 2243 lbs Weight 2517 lbs Stall Pressure 100 psi - psi 151 psi - psi
Thread Form 62C0013 Material Alloy Steel Stall Torque 4,421 ft-lbs - ft-lbs 6,676 ft-lbs - ft-lbs
o
Stator Minors and Fit (in.) at 70 F
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 6.589 0.010 6.587 0.012
1
2
3
4
5
6
7
8
Reline Lengths (in.) Breen: Max 250 Min 238 Willis: Max - Min - Alternate Stator OD: - in.
0.400
5,000
0.350
4,000 0.300
Fit Increase (in)
Torque (ft-lbs)
0.250
3,000
0.200
2,000 0.150
0.100
1,000
0.050
0 0.000
0 20 40 60 80 100 120 0 50 100 150 200 250
80 60
1400 GPM 1400 GPM
Speed (rpm)
50
60
1000 GPM 40
1000 GPM
40 30
20
20
10
0 0
0 20 40 60 80 100 120 0 20 40 60 80 100 120
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 113
Power Section Specification (Metric Units) 475-2380
475-2380
4.75”2:3
4.75" 2:3Lobes
Lobes88Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6172 mm Overall Length 6477 mm Flow Range 379-984 LPM
Avg. Diameter 57.33 mm Tube OD 120.7 mm Rev per Unit Volume 0.66 Rev/L
Contour Length 6020 mm Contour Length 6071 mm Speed Range 248-646 RPM
Eccentricity 6.11 mm Tube ID 95.25 mm No Load Pressure Loss 707 kPa
Major Diameter 69.55 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 6,640 kPa 8,300 kPa 9,960 kPa 10,956 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 1,543 N-m 1,929 N-m 2,315 N-m 2,547 N-m
Weight 79 kg Weight 252 kg Stall Pressure 10,624 kPa 13,280 kPa 15,936 kPa 17,529 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,470 N-m 3,087 N-m 3,705 N-m 4,075 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1
2 S 58.22 -0.89 58.14 -0.82
3
4 OS 58.17 -0.84 58.24 -0.92
5
6 2-OS 59.26 -1.93 59.26 -1.93
7
8
Reline Lengths (mm) Breen: Max 6477 Min 6121 Willis: Max - Min - Alternate Stator OD: 127.0 mm
1.600
2,500
1.400
2,000
Fit Increase (mm)
1.200
Torque (Nm)
1.000
1,500
0.800
1,000 0.600
0.400
500
0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 20 40 60 80 100 120 140
120
500
100
Speed (rpm)
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 114
Power Section Specification (Metric Units) 475-4511
475-4511
4.75” 4:5
4.75" 4:5 Lobes
Lobes 1.1 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 1006 mm Overall Length 1041 mm Flow Range 379-1041 LPM
Avg. Diameter 61.47 mm Tube OD 120.7 mm Rev per Unit Volume 0.27 Rev/L
Contour Length 848 mm Contour Length 826 mm Speed Range 102-281 RPM
Eccentricity 6.25 mm Tube ID 95.3 mm No Load Pressure Loss 594 kPa
Major Diameter 73.96 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 108.0 mm Max Pressure 538 kPa 673 kPa 807 kPa 888 kPa
Head Length 158.5 mm Side 2: 108.0 mm Max Torque 291 N-m 364 N-m 437 N-m 481 N-m
Weight 25 kg Weight 38 kg Stall Pressure 860 kPa 1,076 kPa 1,291 kPa 1,420 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 466 N-m 583 N-m 699 N-m 769 N-m
Fit Details (mm) at 21 C
o
Torque (N-m) versus Differential Pressure Fit Increase (mm) versus Change in Temperature
600 4.500
4.000
500
3.500
400 3.000
2.500
300
2.000
200 1.500
1.000
100
0.500
0 0.000
0 200 400 600 800 1,000 1,200 0 20 40 60 80 100 120 140
RPM (Rev/Min) versus Differential Pressure Mechanical Horsepower (HP) versus Differential Pressure
300 18
1041 LPM
1041 LPM 16
250
14
200 12
700 LPM 10
150 700 LPM
8
100 6
379 LPM
4
50 379 LPM
2
0 0
0 200 400 600 800 1,000 1,200 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
12/17/2014
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 115
Power Section Specification (Metric Units) 475-4535
475-4535
4.75” 4:5
4.75" 4:5 Lobes
Lobes 3.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2718 mm Overall Length 2946 mm Flow Range 379-1041 LPM
Avg. Diameter 61.47 mm Tube OD 120.7 mm Rev per Unit Volume 0.27 Rev/L
Contour Length 2565 mm Contour Length 2540 mm Speed Range 102-282 RPM
Eccentricity 6.25 mm Tube ID 95.25 mm No Load Pressure Loss 715 kPa
Major Diameter 73.96 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 2,779 kPa 3,474 kPa 4,169 kPa 4,585 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 1,499 N-m 1,874 N-m 2,249 N-m 2,474 N-m
Weight 67 kg Weight 108 kg Stall Pressure 4,446 kPa 5,558 kPa 6,669 kPa 7,336 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,399 N-m 2,999 N-m 3,599 N-m 3,959 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 61.06 0.41 60.71 0.76 60.93 0.53 60.60 0.86
0 S OS 61.60 -0.13 61.77 -0.30 61.39 0.08 61.65 -0.18 61.60 -0.13 61.34 0.13
1
2
3
4
5
6
7 2-OS 3-OS 62.74 -1.27 63.27 -1.80 63.04 -1.57 62.74 -1.27 63.02 -1.55 62.89 -1.42
8
Reline Lengths (mm) Breen: Max 3099 Min 2743 Willis: Max 3099 Min 2642 Alternate Stator OD: 127.0 mm
1.800
2,500
1.600
1.400
2,000
Fit Increase (mm)
Torque (Nm)
1.200
1,500 1.000
0.800
1,000
0.600
0.400
500
0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 0 20 40 60 80 100 120 140
1041 LPM 70
250
1041 LPM
Mechanical Power (Kw)
60
200
50
Speed (rpm)
700 LPM
150 40
700 LPM
30
100
379 LPM
20
50
10 379 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 116
Power Section Specification (Metric Units) 475-4560
475-4560
4.75”4:5
4.75" 4:5Lobes
Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4547 mm Overall Length 4750 mm Flow Range 379-1041 LPM
Avg. Diameter 61.47 mm Tube OD 120.7 mm Rev per Unit Volume 0.27 Rev/L
Contour Length 4394 mm Contour Length 4343 mm Speed Range 102-282 RPM
Eccentricity 6.25 mm Tube ID 95.25 mm No Load Pressure Loss 597 kPa
Major Diameter 73.96 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 5,378 kPa 6,723 kPa 8,067 kPa 8,874 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 2,897 N-m 3,622 N-m 4,346 N-m 4,781 N-m
Weight 111 kg Weight 175 kg Stall Pressure 8,604 kPa 10,756 kPa 12,907 kPa 14,197 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,636 N-m 5,795 N-m 6,954 N-m 7,649 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 61.04 0.43 60.73 0.74 60.93 0.53 60.55 0.91
0 S OS 61.87 -0.41 61.65 -0.18 61.39 0.08 61.80 -0.33 61.60 -0.13 61.24 0.23
1
2
3
4 OS 62.05 -0.58 62.05 -0.58
5
6
7 2-OS 2-OS 62.66 -1.19 62.46 -0.99 62.23 -0.76 62.61 -1.14 62.28 -0.81 62.10 -0.63
8
Reline Lengths (mm) Breen: Max 4750 Min 4394 Willis: Max 4750 Min 4445 Alternate Stator OD: 127.0 mm
1.800
5,000
1.600
1.400
4,000
Fit Increase (mm)
Torque (Nm)
1.200
3,000 1.000
0.800
2,000
0.600
0.400
1,000
0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
120
200
100
Speed (rpm)
700 LPM
150 80
700 LPM
60
100
379 LPM
40
50
20 379 LPM
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 117
Power Section Specification (Metric Units) 475-4563
475-4563
4.75” 4:5
4.75" 4:5 Lobes
Lobes 6.3 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4775 mm Overall Length 5274 mm Flow Range 379-1041 LPM
Avg. Diameter 61.47 mm Tube OD 120.7 mm Rev per Unit Volume 0.27 Rev/L
Contour Length 4623 mm Contour Length 4572 mm Speed Range 103-284 RPM
Eccentricity 6.25 mm Tube ID 95.25 mm No Load Pressure Loss 599 kPa
Major Diameter 73.96 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 279.4 mm Max Pressure 5,688 kPa 7,110 kPa 8,532 kPa 9,385 kPa
Head Length 152.4 mm Side 2: 422.1 mm Max Torque 3,048 N-m 3,811 N-m 4,573 N-m 5,030 N-m
Weight 117 kg Weight 193 kg Stall Pressure 9,100 kPa 11,376 kPa 13,651 kPa 15,016 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,877 N-m 6,097 N-m 7,317 N-m 8,049 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 60.81 0.66 60.48 0.99 60.76 0.71 60.43 1.04
0 S OS 61.77 -0.30 61.60 -0.13 61.37 0.10 61.70 -0.23 61.37 0.10 61.21 0.25
1
2
3
4 OS 2-OS 62.23 -0.76 62.41 -0.94 62.10 -0.63 62.15 -0.69 62.18 -0.71 61.90 -0.43
5
6
7 2-OS 3-OS 62.64 -1.17 63.30 -1.83 62.94 -1.47 62.48 -1.02 62.99 -1.52 62.89 -1.42
8
Reline Lengths (mm) Breen: Max 5258 Min 4902 Willis: Max 5273 Min 4968 Alternate Stator OD: 127.0 mm
1.800
5,000
1.600
1.400
4,000
Fit Increase (mm)
Torque (Nm)
1.200
3,000 1.000
0.800
2,000
0.600
0.400
1,000
0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 0 20 40 60 80 100 120 140
120
200
100
Speed (rpm)
700 LPM
150 80
700 LPM
60
100
379 LPM
40
50
20 379 LPM
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 118
Power Section Specification (Metric Units) 475-5630
475-5630
4.75”5:6
4.75" 5:6Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2146 mm Overall Length 2326 mm Flow Range 379-1041 LPM
Avg. Diameter 66.34 mm Tube OD 120.7 mm Rev per Unit Volume 0.32 Rev/L
Contour Length 1994 mm Contour Length 1920 mm Speed Range 121-334 RPM
Eccentricity 4.98 mm Tube ID 95.25 mm No Load Pressure Loss 740 kPa
Major Diameter 76.30 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 2,379 kPa 2,974 kPa 3,569 kPa 3,925 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 1,061 N-m 1,327 N-m 1,592 N-m 1,751 N-m
Weight 48 kg Weight 86 kg Stall Pressure 3,806 kPa 4,758 kPa 5,709 kPa 6,280 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,698 N-m 2,123 N-m 2,547 N-m 2,802 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 66.09 0.25 65.63 0.71 65.79 0.56 65.51 0.84
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 2327 Min 2022 Alternate Stator OD: 127.0 mm
1,800 1.600
1,600
1.400
1,400
Fit Increase (mm)
1.200
Torque (Nm)
1,200
1.000
1,000
0.800
800
0.600
600
0.400
400
200 0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
350 60
300
50
250
Speed (rpm)
40
200 700 LPM
30
700 LPM
150
20
100 379 LPM
10
50 379 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 119
Power Section Specification (Metric Units) 475-5645
475-5645
4.75” 5:6
4.75" 5:6 Lobes
Lobes 4.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2718 mm Overall Length 3099 mm Flow Range 379-757 LPM
Avg. Diameter 63.60 mm Tube OD 120.7 mm Rev per Unit Volume 0.46 Rev/L
Contour Length 2565 mm Contour Length 2692 mm Speed Range 173-346 RPM
Eccentricity 4.11 mm Tube ID 95.25 mm No Load Pressure Loss 762 kPa
Major Diameter 71.83 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 4,178 kPa 5,223 kPa 6,267 kPa 6,894 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 1,308 N-m 1,635 N-m 1,962 N-m 2,158 N-m
Weight 53 kg Weight 117 kg Stall Pressure 6,684 kPa 8,356 kPa 10,027 kPa 11,029 kPa
Thread Form 62C0001 Material Alloy Steel Stall Torque 2,093 N-m 2,616 N-m 3,140 N-m 3,453 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 63.78 -0.18 63.78 -0.18
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 3099 Min 2794 Willis: Max - Min - Alternate Stator OD: 127.0 mm
1.400
2,000
1.200
Fit Increase (mm)
1.000
Torque (Nm)
1,500
0.800
1,000
0.600
0.400
500
0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
300 60
250 50
Speed (rpm)
568 LPM
568 LPM
200 40
379 LPM
100 20
50 10
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 120
Power Section Specification (Metric Units) 475-5660
475-5660
4.75”5:6
4.75" 5:6Lobes
Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4521 mm Overall Length 4750 mm Flow Range 379-946 LPM
Avg. Diameter 64.32 mm Tube OD 120.7 mm Rev per Unit Volume 0.21 Rev/L
Contour Length 4369 mm Contour Length 4343 mm Speed Range 79-199 RPM
Eccentricity 5.36 mm Tube ID 95.25 mm No Load Pressure Loss 615 kPa
Major Diameter 75.04 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 5,219 kPa 6,524 kPa 7,829 kPa 8,611 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 3,538 N-m 4,423 N-m 5,308 N-m 5,839 N-m
Weight 118 kg Weight 175 kg Stall Pressure 8,350 kPa 10,438 kPa 12,525 kPa 13,778 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,661 N-m 7,077 N-m 8,492 N-m 9,342 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1
2
3
4
5
6
7 2-OS 65.46 -1.14 65.46 -1.14
8
Reline Lengths (mm) Breen: Max 4750 Min 4445 Willis: Max - Min - Alternate Stator OD: 127.0 mm
6,000 1.200
5,000 1.000
Fit Increase (mm)
Torque (Nm)
4,000 0.800
3,000 0.600
2,000 0.400
1,000 0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
946 LPM
100
200
Mechanical Power (Kw)
946 LPM
80
Speed (rpm)
150
100
40
379 LPM
50 379 LPM
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 121
Power Section Specification (Metric Units) 475-5683
475-5683
4.75” 5:6
4.75" 5:6 Lobes
Lobes 8.3 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5827 mm Overall Length 6162 mm Flow Range 379-1041 LPM
Avg. Diameter 63.56 mm Tube OD 120.7 mm Rev per Unit Volume 0.25 Rev/L
Contour Length 5643 mm Contour Length 5679 mm Speed Range 95-262 RPM
Eccentricity 5.25 mm Tube ID 95.25 mm No Load Pressure Loss 654 kPa
Major Diameter 74.07 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 79.38 mm Side 1: 203.2 mm Max Pressure 7,867 kPa 9,834 kPa 11,801 kPa 12,981 kPa
Head Length 184.2 mm Side 2: 279.4 mm Max Torque 4,467 N-m 5,584 N-m 6,701 N-m 7,371 N-m
Weight 147 kg Weight 227 kg Stall Pressure 12,587 kPa 15,734 kPa 18,880 kPa 20,768 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 7,147 N-m 8,934 N-m 10,721 N-m 11,793 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 62.89 0.67 62.71 0.85 62.81 0.75 62.59 0.98
0 S 63.65 -0.09 63.55 0.01
1
2 OS 63.65 -0.09 63.40 0.17 63.50 0.06 63.32 0.24
3
4 OS 1.5-OS 64.14 -0.57 64.16 -0.60 63.88 -0.32 64.08 -0.52 63.98 -0.42 63.86 -0.29
5
6 2-OS 64.54 -0.98 64.26 -0.70 64.49 -0.93 64.14 -0.57
7 2-OS 2.5-OS 64.92 -1.36 64.97 -1.41 64.59 -1.03 64.80 -1.23
64.87 -1.31 64.62 -1.05
8 3-OS 65.43 -1.87 65.07 -1.51 65.53 -1.97 65.05 -1.49
Reline Lengths (mm) Breen: Max 6162 Min 5857 Willis: Max 6162 Min 5857 Alternate Stator OD: 127.0 mm
8,000 1.600
7,000 1.400
6,000
Fit Increase (mm)
1.200
Torque (Nm)
5,000 1.000
4,000 0.800
3,000 0.600
2,000 0.400
1,000 0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 0 20 40 60 80 100 120 140
250
1041 LPM 200
Mechanical Power (Kw)
1041 LPM
200
Speed (rpm)
150
700 LPM
150
100
700 LPM
100
379 LPM
50
50
379 LPM
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 122
Power Section Specification (Metric Units) 475-7820 (A)
475-7820 (A)
4.75”7:8
4.75" 7:8Lobes
Lobes22Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4382 mm Overall Length 4572 mm Flow Range 379-946 LPM
Avg. Diameter 62.82 mm Tube OD 120.7 mm Rev per Unit Volume 0.08 Rev/L
Contour Length 4229 mm Contour Length 4166 mm Speed Range 29-74 RPM
Eccentricity 4.13 mm Tube ID 95.25 mm No Load Pressure Loss 793 kPa
Major Diameter 71.08 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 71.75 mm Side 1: 203.2 mm Max Pressure 1,462 kPa 1,828 kPa 2,193 kPa 2,412 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 2,530 N-m 3,163 N-m 3,795 N-m 4,175 N-m
Weight 106 kg Weight 170 kg Stall Pressure 2,339 kPa 2,924 kPa 3,508 kPa 3,859 kPa
Thread Form 62C0001 Material Alloy Steel Stall Torque 4,048 N-m 5,061 N-m 6,071 N-m 6,679 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 63.50 -0.69 63.40 -0.58
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 4572 Min 4216 Willis: Max Min Alternate Stator OD: 127.0 mm
4,500
1.400
4,000
1.200
3,500
Fit Increase (mm)
1.000
Torque (Nm)
3,000
2,500 0.800
2,000
0.600
1,500
0.400
1,000
0.200
500
0 0.000
0 500 1,000 1,500 2,000 2,500 3,000 0 20 40 60 80 100 120 140
70 946 LPM 30
946 LPM
Mechanical Power (Kw)
60
25
50
Speed (rpm)
662 LPM 20
40
662 LPM
15
30
379 LPM 10
20
5 379 LPM
10
0 0
0 500 1,000 1,500 2,000 2,500 3,000 0 500 1,000 1,500 2,000 2,500 3,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 123
Power Section Specification (Metric Units) 475-7820 (B)
475-7820 (B)
4.75”7:8
4.75" 7:8Lobes
Lobes22Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3785 mm Overall Length 4013 mm Flow Range 379-1041 LPM
Avg. Diameter 68.28 mm Tube OD 120.7 mm Rev per Unit Volume 0.09 Rev/L
Contour Length 3632 mm Contour Length 3607 mm Speed Range 32-89 RPM
Eccentricity 4.27 mm Tube ID 95.25 mm No Load Pressure Loss 781 kPa
Major Diameter 76.81 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 1,475 kPa 1,844 kPa 2,213 kPa 2,434 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 2,348 N-m 2,935 N-m 3,522 N-m 3,874 N-m
Weight 110 kg Weight 146 kg Stall Pressure 2,360 kPa 2,950 kPa 3,540 kPa 3,894 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,757 N-m 4,696 N-m 5,635 N-m 6,199 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 67.92 0.36 67.69 0.58 67.82 0.46 67.61 0.66
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max Min Willis: Max 4039 Min 3734 Alternate Stator OD: 127.0 mm
4,000 1.400
3,500
1.200
3,000
Fit Increase (mm)
1.000
Torque (Nm)
2,500
0.800
2,000
0.600
1,500
0.400
1,000
500 0.200
0 0.000
0 500 1,000 1,500 2,000 2,500 3,000 0 20 40 60 80 100 120 140
90
35
1041 LPM
80 1041 LPM
Mechanical Power (Kw)
30
70
25
Speed (rpm)
60
700 LPM
50 20
700 LPM
40
15
30
379 LPM 10
20
5 379 LPM
10
0 0
0 500 1,000 1,500 2,000 2,500 3,000 0 500 1,000 1,500 2,000 2,500 3,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 124
Power Section Specification (Metric Units) 475-7820 (C)
475-7820 (C)
4.75”7:8
4.75" 7:8Lobes
Lobes22Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 1308 mm Overall Length 1638 mm Flow Range 379-1041 LPM
Avg. Diameter 69.30 mm Tube OD 120.7 mm Rev per Unit Volume 0.27 Rev/L
Contour Length 1181 mm Contour Length 1181 mm Speed Range 102-280 RPM
Eccentricity 4.30 mm Tube ID 95.25 mm No Load Pressure Loss 963 kPa
Major Diameter 77.90 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 330.2 mm Max Pressure 1,296 kPa 1,620 kPa 1,944 kPa 2,138 kPa
Head Length 127.0 mm Side 2: 127.0 mm Max Torque 657 N-m 822 N-m 986 N-m 1,085 N-m
Weight 39 kg Weight 59 kg Stall Pressure 2,073 kPa 2,592 kPa 3,110 kPa 3,421 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,052 N-m 1,315 N-m 1,578 N-m 1,736 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 68.66 0.65 68.45 0.85 68.58 0.72 68.28 1.03
1
2
3
4 OS 69.37 -0.06 69.16 0.14 69.19 0.11 69.04 0.27
5
6
7
8
Reline Lengths (mm) Breen: Max Min Willis: Max 1638 Min 1334 Alternate Stator OD: 127.0 mm
1,200 1.400
1.200
1,000
Fit Increase (mm)
1.000
Torque (Nm)
800
0.800
600
0.600
400
0.400
200
0.200
0 0.000
0 500 1,000 1,500 2,000 2,500 0 20 40 60 80 100 120 140
1041 LPM 30
250
1041 LPM
Mechanical Power (Kw)
25
200
Speed (rpm)
700 LPM 20
150
15 700 LPM
100
379 LPM 10
50
5
379 LPM
0 0
0 500 1,000 1,500 2,000 2,500 3,000 0 500 1,000 1,500 2,000 2,500 3,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 125
Power Section Specification (Metric Units) 475-7822 (A)
475-7822 (A)
4.75” 7:8
4.75" 7:8 Lobes
Lobes 2.2 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2718 mm Overall Length 2946 mm Flow Range 379-1041 LPM
Avg. Diameter 66.23 mm Tube OD 120.7 mm Rev per Unit Volume 0.15 Rev/L
Contour Length 2565 mm Contour Length 2540 mm Speed Range 55-152 RPM
Eccentricity 4.17 mm Tube ID 95.25 mm No Load Pressure Loss 844 kPa
Major Diameter 74.58 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 1,669 kPa 2,086 kPa 2,504 kPa 2,754 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 1,561 N-m 1,952 N-m 2,342 N-m 2,577 N-m
Weight 76 kg Weight 107 kg Stall Pressure 2,670 kPa 3,338 kPa 4,005 kPa 4,406 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,498 N-m 3,123 N-m 3,747 N-m 4,123 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 66.32 -0.09 66.19 0.04
1
2
3
4
5
6
7 2-OS 67.31 -1.08 67.31 -1.08
8
Reline Lengths (mm) Breen: Max 3099 Min 2743 Willis: Max Min Alternate Stator OD: 127.0 mm
1.200
2,500
1.000
2,000
Fit Increase (mm)
Torque (Nm)
0.800
1,500
0.600
1,000
0.400
500
0.200
0 0.000
0 500 1,000 1,500 2,000 2,500 3,000 3,500 0 20 40 60 80 100 120 140
120 30
100 25
Speed (rpm)
700 LPM
80 20 700 LPM
60 15
379 LPM
40 10
5 379 LPM
20
0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 0 500 1,000 1,500 2,000 2,500 3,000 3,500
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 126
Power Section Specification (Metric Units) 475-7822
475-7822
475-4511(B)
(B)
4.75” 7:8
4.75" 4:5 Lobes
7:8 Lobes 2.2
1.1 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2718 mm Overall Length 2946 mm Flow Range 379-1041 LPM
Avg. Diameter 66.23 mm Tube OD 120.7 mm Rev per Unit Volume 0.15 Rev/L
Contour Length 2565 mm Contour Length 2540 mm Speed Range 55-152 RPM
Eccentricity 4.17 mm Tube ID 95.25 mm No Load Pressure Loss 844 kPa
Major Diameter 74.58 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 1,669 kPa 2,086 kPa 2,504 kPa 2,754 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 1,561 N-m 1,952 N-m 2,342 N-m 2,577 N-m
Weight 76 kg Weight 107 kg Stall Pressure 2,670 kPa 3,338 kPa 4,005 kPa 4,406 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,498 N-m 3,123 N-m 3,747 N-m 4,123 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 65.66 0.57 65.20 1.03 65.56 0.67 65.10 1.13
1
2
3
4 OS 65.99 0.24 65.74 0.49 65.96 0.27 65.74 0.49
5
6
7 2-OS 66.60 -0.37 66.19 0.04 66.52 -0.29 66.14 0.09
8
Reline Lengths (mm) Breen: Max Min Willis: Max 3124 Min 2667 Alternate Stator OD: 127.0 mm
1.600
2,500
1.400
2,000
Fit Increase (mm)
1.200
Torque (Nm)
1.000
1,500
0.800
1,000 0.600
0.400
500
0.200
0 0.000
0 500 1,000 1,500 2,000 2,500 3,000 3,500 0 20 40 60 80 100 120 140
1041 LPM
35
Mechanical Power (Kw)
120
30
100
Speed (rpm)
700 LPM 25
80
20
700 LPM
60
15
379 LPM
40
10
20 5 379 LPM
0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 0 500 1,000 1,500 2,000 2,500 3,000 3,500
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 127
Power Section Specification (Metric Units) 475-7826
475-7826
4.75” 7:8
4.75" 7:8 Lobes
Lobes 2.6 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5588 mm Overall Length 5824 mm Flow Range 379-1136 LPM
Avg. Diameter 69.80 mm Tube OD 120.7 mm Rev per Unit Volume 0.07 Rev/L
Contour Length 5443 mm Contour Length 5418 mm Speed Range 25-76 RPM
Eccentricity 4.43 mm Tube ID 101.60 mm No Load Pressure Loss 758 kPa
Major Diameter 78.66 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 2,234 kPa 2,793 kPa 3,351 kPa 3,686 kPa
Head Length 144.8 mm Side 2: 203.2 mm Max Torque 4,554 N-m 5,693 N-m 6,832 N-m 7,515 N-m
Weight 168 kg Weight 173 kg Stall Pressure 3,574 kPa 4,468 kPa 5,361 kPa 5,897 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 7,286 N-m 9,109 N-m 10,930 N-m 12,022 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 70.00 -0.20 69.93 -0.13 69.60 0.20 69.85 -0.05 69.85 -0.05 69.57 0.23
1
2
3
4 OS OS 70.66 -0.86 70.31 -0.51 69.95 -0.15 70.89 -1.09 70.10 -0.30 69.95 -0.15
5
6
7
8
Reline Lengths (mm) Breen: Max Min Willis: Max 6020 Min 5512 Alternate Stator OD: 127.0 mm
9,000 1.600
8,000
1.400
7,000
Fit Increase (mm)
1.200
Torque (Nm)
6,000
1.000
5,000
0.800
4,000
0.600
3,000
0.400
2,000
1,000 0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
80
60
1136 LPM
70 1136 LPM
Mechanical Power (Kw)
50
60
Speed (rpm)
50 40
757 LPM
40 30 757 LPM
30
20
20 379 LPM
10
10 379 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 128
Power Section Specification (Metric Units) 475-7829
475-7829
4.75” 7:8
4.75" 7:8 Lobes
Lobes 2.9 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6147 mm Overall Length 6350 mm Flow Range 379-946 LPM
Avg. Diameter 62.82 mm Tube OD 120.7 mm Rev per Unit Volume 0.08 Rev/L
Contour Length 6007 mm Contour Length 5944 mm Speed Range 31-77 RPM
Eccentricity 4.13 mm Tube ID 95.25 mm No Load Pressure Loss 821 kPa
Major Diameter 71.08 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 76.20 mm Side 1: 203.2 mm Max Pressure 2,399 kPa 2,999 kPa 3,599 kPa 3,958 kPa
Head Length 139.7 mm Side 2: 203.2 mm Max Torque 3,986 N-m 4,982 N-m 5,979 N-m 6,577 N-m
Weight 149 kg Weight 237 kg Stall Pressure 3,838 kPa 4,798 kPa 5,757 kPa 6,333 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 6,377 N-m 7,972 N-m 9,566 N-m 10,523 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 62.64 0.18 62.51 0.31
0 S OS 63.14 -0.33 63.30 -0.48 63.07 -0.25 63.17 -0.35
1
2
3
4 OS 63.60 -0.79 63.42 -0.61
5
6
7 2-OS 63.91 -1.09 63.83 -1.02
8
Reline Lengths (mm) Breen: Max 6353 Min 6048 Willis: Max 6350 Min 6045 Alternate Stator OD: 127.0 mm
7,000 1.600
1.400
6,000
Fit Increase (mm)
1.200
5,000
Torque (Nm)
1.000
4,000
0.800
3,000
0.600
2,000
0.400
1,000 0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
946 LPM 40
70
Mechanical Power (Kw)
35
60
Speed (rpm)
30
50 662 LPM 662 LPM
25
40
20
30
15
379 LPM
20 10 379 LPM
10 5
0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 129
Power Section Specification (Metric Units) 475-7830
475-7830
4.75”7:8
4.75" 7:8Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2870 mm Overall Length 3115 mm Flow Range 379-1041 LPM
Avg. Diameter 67.87 mm Tube OD 120.7 mm Rev per Unit Volume 0.17 Rev/L
Contour Length 2718 mm Contour Length 2683 mm Speed Range 65-180 RPM
Eccentricity 4.37 mm Tube ID 98.43 mm No Load Pressure Loss 790 kPa
Major Diameter 76.61 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 215.9 mm Max Pressure 2,565 kPa 3,206 kPa 3,848 kPa 4,232 kPa
Head Length 152.4 mm Side 2: 215.9 mm Max Torque 2,019 N-m 2,524 N-m 3,029 N-m 3,332 N-m
Weight 87 kg Weight 104 kg Stall Pressure 4,104 kPa 5,130 kPa 6,156 kPa 6,771 kPa
Thread Form 1 7/8"-4 SA Material Alloy Steel Stall Torque 3,231 N-m 4,039 N-m 4,847 N-m 5,332 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 68.28 -0.41 67.67 0.20 68.02 -0.15 67.64 0.23
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max Min Willis: Max 3124 Min 2809 Alternate Stator OD: 127.0 mm
3,500 1.600
1.400
3,000
Fit Increase (mm)
1.200
2,500
Torque (Nm)
1.000
2,000
0.800
1,500
0.600
1,000
0.400
500 0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
180
60
1041 LPM
160 1041 LPM
Mechanical Power (Kw)
140 50
Speed (rpm)
120
40
700 LPM
100
30 700 LPM
80
60 20
379 LPM
40
10
379 LPM
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 130
Power Section Specification (Metric Units) 475-7831
475-7831
4.75” 7:8
4.75" 7:8 Lobes
Lobes 3.1 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5817 mm Overall Length 6045 mm Flow Range 379-1041 LPM
Avg. Diameter 68.28 mm Tube OD 120.7 mm Rev per Unit Volume 0.09 Rev/L
Contour Length 5664 mm Contour Length 5639 mm Speed Range 32-89 RPM
Eccentricity 4.27 mm Tube ID 95.25 mm No Load Pressure Loss 781 kPa
Major Diameter 76.81 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 2,751 kPa 3,439 kPa 4,127 kPa 4,539 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 4,379 N-m 5,474 N-m 6,569 N-m 7,226 N-m
Weight 168 kg Weight 221 kg Stall Pressure 4,401 kPa 5,502 kPa 6,602 kPa 7,262 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 7,006 N-m 8,759 N-m 10,510 N-m 11,561 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 67.97 0.30 67.77 0.51 67.64 0.63 67.69 0.58
1
2
3
4 OS 68.55 -0.28 68.45 -0.18 68.40 -0.13 68.35 -0.08
5
6
7
8
Reline Lengths (mm) Breen: Max Min Willis: Max 6045 Min 5740 Alternate Stator OD: 127.0 mm
8,000 1.400
7,000
1.200
6,000
Fit Increase (mm)
1.000
Torque (Nm)
5,000
0.800
4,000
0.600
3,000
0.400
2,000
1,000 0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 0 20 40 60 80 100 120 140
90
60 1041 LPM
1041 LPM
80
Mechanical Power (Kw)
70 50
Speed (rpm)
60
40
700 LPM
50
700 LPM
30
40
30 20
379 LPM
20
10 379 LPM
10
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 131
Power Section Specification (Metric Units) 475-7838
475-7838
4.75” 7:8
4.75" 7:8 Lobes
Lobes 3.8 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4521 mm Overall Length 4750 mm Flow Range 379-1041 LPM
Avg. Diameter 66.23 mm Tube OD 120.7 mm Rev per Unit Volume 0.15 Rev/L
Contour Length 4369 mm Contour Length 4343 mm Speed Range 55-152 RPM
Eccentricity 4.17 mm Tube ID 95.25 mm No Load Pressure Loss 1014 kPa
Major Diameter 74.58 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 3,282 kPa 4,103 kPa 4,923 kPa 5,415 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 3,065 N-m 3,831 N-m 4,597 N-m 5,057 N-m
Weight 125 kg Weight 175 kg Stall Pressure 5,251 kPa 6,564 kPa 7,876 kPa 8,664 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,903 N-m 6,130 N-m 7,355 N-m 8,091 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 65.71 0.52 65.46 0.77 65.68 0.55 65.25 0.98
0 S OS 66.42 -0.19 66.42 -0.19 66.22 0.01 66.34 -0.11 66.19 0.04 66.12 0.11
1
2
3
4 OS 2-OS 67.01 -0.78 67.06 -0.83 66.83 -0.60 66.95 -0.72 66.85 -0.62 66.83 -0.60
5
6
7 2-OS 67.28 -1.05 67.31 -1.08
8
Reline Lengths (mm) Breen: Max 5029 Min 4445 Willis: Max 5029 Min 4445 Alternate Stator OD: 127.0 mm
1.400
5,000
1.200
4,000
Fit Increase (mm)
1.000
Torque (Nm)
3,000 0.800
0.600
2,000
0.400
1,000
0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 20 40 60 80 100 120 140
160 80
120 60
Speed (rpm)
100 50
700 LPM
80 40
700 LPM
60 30
379 LPM 20
40
20 10 379 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 132
Power Section Specification (Metric Units) 475-7850 (A)
475-7850 (A)
4.75”7:8
4.75" 7:8Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4724 mm Overall Length 4928 mm Flow Range 379-1041 LPM
Avg. Diameter 68.55 mm Tube OD 120.7 mm Rev per Unit Volume 0.16 Rev/L
Contour Length 4572 mm Contour Length 4521 mm Speed Range 62-170 RPM
Eccentricity 4.34 mm Tube ID 95.25 mm No Load Pressure Loss 755 kPa
Major Diameter 77.24 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 4,833 kPa 6,041 kPa 7,250 kPa 7,974 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 4,036 N-m 5,045 N-m 6,054 N-m 6,660 N-m
Weight 142 kg Weight 179 kg Stall Pressure 7,732 kPa 9,666 kPa 11,599 kPa 12,759 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 6,457 N-m 8,072 N-m 9,687 N-m 10,656 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 68.28 0.28 68.02 0.53 68.17 0.38 68.00 0.56
1
2
3
4 OS 69.19 -0.64 68.91 -0.36 69.06 -0.51 68.83 -0.28
5
6
7
8
Reline Lengths (mm) Breen: Max Min Willis: Max 5080 Min 4623 Alternate Stator OD: 127.0 mm
7,000 1.400
6,000 1.200
Fit Increase (mm)
5,000 1.000
Torque (Nm)
4,000 0.800
3,000 0.600
2,000 0.400
1,000 0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
120 80
Speed (rpm)
60 40
379 LPM
40
20
379 LPM
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 133
Power Section Specification (Metric Units) 475-34110
475-34110
4.75”3:4
4.75" 3:4Lobes
Lobes 11
11 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5131 mm Overall Length 5283 mm Flow Range 379-1041 LPM
Avg. Diameter 57.32 mm Tube OD 120.7 mm Rev per Unit Volume 0.53 Rev/L
Contour Length 5004 mm Contour Length 4978 mm Speed Range 201-554 RPM
Eccentricity 7.09 mm Tube ID 95.25 mm No Load Pressure Loss 565 kPa
Major Diameter 71.50 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 152.4 mm Max Pressure 9,908 kPa 12,385 kPa 14,862 kPa 16,348 kPa
Head Length 127.0 mm Side 2: 152.4 mm Max Torque 2,783 N-m 3,479 N-m 4,175 N-m 4,592 N-m
Weight 106 kg Weight 197 kg Stall Pressure 15,852 kPa 19,816 kPa 23,779 kPa 26,157 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,453 N-m 5,566 N-m 6,680 N-m 7,348 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 56.62 0.70 56.34 0.98 56.74 0.57 56.16 1.16
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 5283 Min 4978 Alternate Stator OD: 127.0 mm
5,000
2.000
4,000
Fit Increase (mm)
Torque (Nm)
1.500
3,000
1.000
2,000
0.500
1,000
0 0.000
0 5,000 10,000 15,000 20,000 0 20 40 60 80 100 120 140
1041 LPM
500 250
1041 LPM
Mechanical Power (Kw)
400 200
Speed (rpm)
700 LPM
300 150
700 LPM
200 100
379 LPM
100 50
379 LPM
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 18,000 20,000 0 5,000 10,000 15,000 20,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 134
Power Section Specification (Metric Units) 475-34140
475-34140
4.75”3:4
4.75" 3:4Lobes
Lobes 14
14 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5817 mm Overall Length 6045 mm Flow Range 303-1041 LPM
Avg. Diameter 57.32 mm Tube OD 120.7 mm Rev per Unit Volume 0.60 Rev/L
Contour Length 5664 mm Contour Length 5639 mm Speed Range 180-620 RPM
Eccentricity 7.09 mm Tube ID 95.25 mm No Load Pressure Loss 563 kPa
Major Diameter 71.50 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 12,769 kPa 15,961 kPa 19,154 kPa 21,069 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 3,202 N-m 4,003 N-m 4,804 N-m 5,284 N-m
Weight 121 kg Weight 225 kg Stall Pressure 20,430 kPa 25,538 kPa 30,645 kPa 33,710 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,124 N-m 6,405 N-m 7,686 N-m 8,455 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1 S 56.64 0.67 56.44 0.88 56.69 0.62 56.16 1.16
2
3
4
5
6
7 2-OS 58.65 -1.33 58.37 -1.05 58.62 -1.31 58.14 -0.83
8
Reline Lengths (mm) Breen: Max Min Willis: Max 6045 Min 5740 Alternate Stator OD: 127.0 mm
5,000
2.000
4,000
Fit Increase (mm)
Torque (Nm)
1.500
3,000
1.000
2,000
0.500
1,000
0 0.000
0 5,000 10,000 15,000 20,000 25,000 0 20 40 60 80 100 120 140
500 250
Speed (rpm)
400 200
700 LPM
700 LPM
300 150
200 100
303 LPM
100 50
303 LPM
0 0
0 5,000 10,000 15,000 20,000 25,000 30,000 0 5,000 10,000 15,000 20,000 25,000 30,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 135
Power Section Specification (Metric Units) 475-91040
475-91040
4.75”9:10
4.75" 9:10Lobes
Lobes 44 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3839 mm Overall Length 4039 mm Flow Range 379-946 LPM
Avg. Diameter 67.84 mm Tube OD 120.7 mm Rev per Unit Volume 0.15 Rev/L
Contour Length 3686 mm Contour Length 3632 mm Speed Range 56-140 RPM
Eccentricity 3.48 mm Tube ID 95.25 mm No Load Pressure Loss 1018 kPa
Major Diameter 74.80 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 73.66 mm Side 1: 203.2 mm Max Pressure 3,902 kPa 4,878 kPa 5,853 kPa 6,438 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 3,424 N-m 4,280 N-m 5,136 N-m 5,650 N-m
Weight 107 kg Weight 148 kg Stall Pressure 6,243 kPa 7,804 kPa 9,364 kPa 10,301 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,479 N-m 6,849 N-m 8,218 N-m 9,040 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 68.33 -0.48 68.12 -0.28 68.28 -0.43 68.02 -0.18
1
2
3
4 OS 68.58 -0.74 68.48 -0.63 68.61 -0.76 68.25 -0.41
5
6
7
8
Reline Lengths (mm) Breen: Max Min Willis: Max 4039 Min 3734 Alternate Stator OD: 127.0 mm
6,000 1.400
1.200
5,000
Fit Increase (mm)
1.000
Torque (Nm)
4,000
0.800
3,000
0.600
2,000
0.400
1,000
0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
140 80
946 LPM 946 LPM
70
Mechanical Power (Kw)
120
60
100
Speed (rpm)
662 LPM 50
80
40 662 LPM
60
30
379 LPM
40
20
379 LPM
20 10
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 136
Power Section Specification (Metric Units) 500-2390
500-2390
5” 2:3 Lobes
5" Lobes99Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6172 mm Overall Length 6350 mm Flow Range 568-1325 LPM
Avg. Diameter 75.44 mm Tube OD 127 mm Rev per Unit Volume 0.87 Rev/L
Contour Length 6020 mm Contour Length 5944 mm Speed Range 492-1148 RPM
Eccentricity 3.25 mm Tube ID 101.60 mm No Load Pressure Loss 1245 kPa
Major Diameter 81.94 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 73.15 mm Side 1: 203.2 mm Max Pressure 7,005 kPa 8,756 kPa 10,508 kPa 11,558 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 1,234 N-m 1,542 N-m 1,851 N-m 2,036 N-m
Weight 166 kg Weight 254 kg Stall Pressure 11,208 kPa 14,010 kPa 16,812 kPa 18,493 kPa
Thread Form 1 7/8" SA Material Alloy Steel Stall Torque 1,974 N-m 2,468 N-m 2,961 N-m 3,258 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 75.82 -0.37 75.84 -0.40
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 6350 Min 6045 Willis: Max - Min - Alternate Stator OD: - mm
2.500
2,000
Fit Increase (mm)
2.000
Torque (Nm)
1,500
1.500
1,000
1.000
500
0.500
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 20 40 60 80 100 120 140
1325 LPM
1,000
Speed (rpm)
150
800
946 LPM 946 LPM
600
100
50 568 LPM
200
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 137
Power Section Specification (Metric Units) 500-5640
500-5640
5” 5:6 Lobes
5" Lobes44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3442 mm Overall Length 3556 mm Flow Range 379-946 LPM
Avg. Diameter 61.03 mm Tube OD 127 mm Rev per Unit Volume 0.27 Rev/L
Contour Length 3251 mm Contour Length 3151 mm Speed Range 103-258 RPM
Eccentricity 5.53 mm Tube ID 95.25 mm No Load Pressure Loss 1357 kPa
Major Diameter 72.09 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 72.14 mm Side 1: 203.2 mm Max Pressure 2,854 kPa 3,568 kPa 4,281 kPa 4,709 kPa
Head Length 190.5 mm Side 2: 203.2 mm Max Torque 1,497 N-m 1,871 N-m 2,245 N-m 2,470 N-m
Weight 80 kg Weight 154 kg Stall Pressure 4,566 kPa 5,708 kPa 6,849 kPa 7,534 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,395 N-m 2,994 N-m 3,593 N-m 3,952 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 60.88 0.15 60.88 0.15
1
2
3
4
5 OS 61.19 -0.16 61.19 -0.16
6
7
8
Reline Lengths (mm) Breen: Max 3556 Min 3378 Willis: Max - Min - Alternate Stator OD: 120.7 mm
1.400
2,500
1.200
2,000
Fit Increase (mm)
1.000
Torque (Nm)
1,500 0.800
0.600
1,000
0.400
500
0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 0 20 40 60 80 100 120 140
60
250 946 LPM
946 LPM
Mechanical Power (Kw)
50
200
Speed (rpm)
40
662 LPM
150
662 LPM
30
100
379 LPM 20
50 379 LPM
10
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 138
Power Section Specification (Metric Units) 500-6760
500-6760
5” 6:7 Lobes
5" Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4559 mm Overall Length 4699 mm Flow Range 757-1325 LPM
Avg. Diameter 67.23 mm Tube OD 127 mm Rev per Unit Volume 0.27 Rev/L
Contour Length 4407 mm Contour Length 4294 mm Speed Range 205-360 RPM
Eccentricity 4.86 mm Tube ID 101.60 mm No Load Pressure Loss 1998 kPa
Major Diameter 76.95 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 4,544 kPa 5,680 kPa 6,816 kPa 7,498 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 2,341 N-m 2,927 N-m 3,512 N-m 3,864 N-m
Weight 126 kg Weight 202 kg Stall Pressure 7,270 kPa 9,088 kPa 10,905 kPa 11,996 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,746 N-m 4,683 N-m 5,620 N-m 6,182 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T US 66.80 0.42 66.80 0.42
0 S 67.28 -0.06 67.23 -0.01
1
2
3
4
5
6
7 2-OS 68.68 -1.46 68.58 -1.35
8
Reline Lengths (mm) Breen: Max 4699 Min 4343 Willis: Max - Min - Alternate Stator OD: - mm
4,000
3.000
3,500
2.500
3,000
Fit Increase (mm)
Torque (Nm)
2,500 2.000
2,000 1.500
1,500
1.000
1,000
0.500
500
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
1325 LPM
350 120
1325 LPM
Mechanical Power (Kw)
300
100
80
200
757 LPM 60
150 757 LPM
40
100
20
50
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 139
Power Section Specification (Metric Units) 500-6770
500-6770
5” 6:7 Lobes
5" Lobes77Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5207 mm Overall Length 5385 mm Flow Range 757-1325 LPM
Avg. Diameter 66.94 mm Tube OD 127 mm Rev per Unit Volume 0.21 Rev/L
Contour Length 5055 mm Contour Length 4979 mm Speed Range 160-281 RPM
Eccentricity 4.87 mm Tube ID 101.60 mm No Load Pressure Loss 1029 kPa
Major Diameter 76.67 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 73.66 mm Side 1: 203.2 mm Max Pressure 6,550 kPa 8,188 kPa 9,825 kPa 10,808 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 4,314 N-m 5,393 N-m 6,471 N-m 7,118 N-m
Weight 145 kg Weight 214 kg Stall Pressure 10,480 kPa 13,100 kPa 15,720 kPa 17,292 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 6,903 N-m 8,628 N-m 10,354 N-m 11,390 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 67.34 -0.40 67.21 -0.27
1
2
3
4
5
6 OS 67.89 -0.96 67.89 -0.96
7
8
Reline Lengths (mm) Breen: Max 5385 Min 5080 Willis: Max Min Alternate Stator OD: 120.7 mm
8,000 1.400
7,000
1.200
6,000
Fit Increase (mm)
1.000
Torque (Nm)
5,000
0.800
4,000
0.600
3,000
0.400
2,000
1,000 0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 20 40 60 80 100 120 140
140
200 1041 LPM
1041 LPM
Speed (rpm)
120
150 100
757 LPM
80 757 LPM
100
60
40
50
20
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 140
Power Section Specification (Metric Units) 500-6780
500-6780
5” 6:7 Lobes
5" Lobes88Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6121 mm Overall Length 6248 mm Flow Range 568-1325 LPM
Avg. Diameter 66.94 mm Tube OD 127 mm Rev per Unit Volume 0.21 Rev/L
Contour Length 5969 mm Contour Length 5867 mm Speed Range 121-282 RPM
Eccentricity 4.87 mm Tube ID 101.60 mm No Load Pressure Loss 919 kPa
Major Diameter 76.67 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 73.66 mm Side 1: 190.5 mm Max Pressure 8,032 kPa 10,040 kPa 12,048 kPa 13,253 kPa
Head Length 152.4 mm Side 2: 190.5 mm Max Torque 5,278 N-m 6,598 N-m 7,917 N-m 8,709 N-m
Weight 171 kg Weight 247 kg Stall Pressure 12,851 kPa 16,064 kPa 19,276 kPa 21,204 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 8,445 N-m 10,557 N-m 12,668 N-m 13,935 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 66.88 0.06 66.55 0.39 66.57 0.36 66.45 0.49
0 S 67.34 -0.40 67.18 -0.25
1
2
3
4 OS 2-OS 67.61 -0.68 67.74 -0.81 67.46 -0.53 67.51 -0.58 67.51 -0.58 67.44 -0.50
5
6 2-OS 68.05 -1.11 67.89 -0.96
7
8
Reline Lengths (mm) Breen: Max 6353 Min 6038 Willis: Max 6350 Min 5944 Alternate Stator OD: mm
9,000 1.800
8,000 1.600
7,000 1.400
Fit Increase (mm)
Torque (Nm)
6,000 1.200
5,000 1.000
4,000 0.800
3,000 0.600
2,000 0.400
1,000 0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 0 20 40 60 80 100 120 140
1325 LPM
250 250
Mechanical Power (Kw)
1325 LPM
200 200
Speed (rpm)
946 LPM
150 150
946 LPM
50 50 568 LPM
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 18,000 0 5,000 10,000 15,000 20,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 141
Power Section Specification (Metric Units) 500-7850 (B)
500-7850 (B)
5” 7:8 Lobes
5" Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4724 mm Overall Length 5029 mm Flow Range 379-1136 LPM
Avg. Diameter 68.66 mm Tube OD 127 mm Rev per Unit Volume 0.18 Rev/L
Contour Length 4572 mm Contour Length 4623 mm Speed Range 68-205 RPM
Eccentricity 4.29 mm Tube ID 95.25 mm No Load Pressure Loss 808 kPa
Major Diameter 77.24 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 69.85 mm Side 1: 203.2 mm Max Pressure 5,812 kPa 7,265 kPa 8,718 kPa 9,590 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 4,403 N-m 5,504 N-m 6,605 N-m 7,266 N-m
Weight 142 kg Weight 232 kg Stall Pressure 9,299 kPa 11,624 kPa 13,948 kPa 15,343 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 7,046 N-m 8,807 N-m 10,568 N-m 11,625 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 68.94 -0.28 68.63 0.03 68.71 -0.05 68.53 0.13
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 4775 Min 5029 Alternate Stator OD: 120.7 mm
8,000 1.400
7,000
1.200
6,000
Fit Increase (mm)
1.000
Torque (Nm)
5,000
0.800
4,000
0.600
3,000
0.400
2,000
1,000 0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 0 20 40 60 80 100 120 140
100
Speed (rpm)
150
80
757 LPM 757 LPM
100
60
40
50 379 LPM
20 379 LPM
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 142
Power Section Specification (Metric Units) 625-4543
625-4543
6.25” 4:5
6.25" 4:5 Lobes
Lobes 4.3 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2972 mm Overall Length 3150 mm Flow Range 568-1514 LPM
Avg. Diameter 81.79 mm Tube OD 158.8 mm Rev per Unit Volume 0.17 Rev/L
Contour Length 2794 mm Contour Length 2743 mm Speed Range 98-262 RPM
Eccentricity 8.28 mm Tube ID 127.00 mm No Load Pressure Loss 658 kPa
Major Diameter 98.35 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 88.90 mm Side 1: 203.2 mm Max Pressure 3,640 kPa 4,550 kPa 5,460 kPa 6,006 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 3,076 N-m 3,845 N-m 4,614 N-m 5,076 N-m
Weight 128 kg Weight 192 kg Stall Pressure 5,824 kPa 7,280 kPa 8,736 kPa 9,609 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 4,922 N-m 6,153 N-m 7,383 N-m 8,121 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 81.15 0.63 80.90 0.89 81.23 0.56 80.72 1.07
1
2
3
4 OS 82.14 -0.36 82.17 -0.38 82.17 -0.38 81.97 -0.18
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 3150 Min 2845 Alternate Stator OD: 165.1 mm
5,000
2.000
4,000
Fit Increase (mm)
Torque (Nm)
1.500
3,000
1.000
2,000
0.500
1,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 20 40 60 80 100 120 140
100
200
Speed (rpm)
80
1041 LPM
150 1041 LPM
60
100
40
568 LPM
50 568 LPM
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 143
Power Section Specification (Metric Units) 625-4575
625-4575
6.25” 4:5
6.25" 4:5 Lobes
Lobes 7.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4991 mm Overall Length 5169 mm Flow Range 568-1514 LPM
Avg. Diameter 81.79 mm Tube OD 158.8 mm Rev per Unit Volume 0.17 Rev/L
Contour Length 4813 mm Contour Length 4763 mm Speed Range 98-263 RPM
Eccentricity 8.28 mm Tube ID 127.00 mm No Load Pressure Loss 659 kPa
Major Diameter 98.35 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 88.90 mm Side 1: 203.2 mm Max Pressure 6,812 kPa 8,515 kPa 10,218 kPa 11,240 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 5,738 N-m 7,173 N-m 8,607 N-m 9,468 N-m
Weight 214 kg Weight 317 kg Stall Pressure 10,899 kPa 13,624 kPa 16,348 kPa 17,983 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 9,181 N-m 11,477 N-m 13,772 N-m 15,149 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 81.23 0.56 80.90 0.89 81.15 0.63 80.62 1.17
0 S 81.66 0.13 81.53 0.25
1
2
3
4 OS 82.32 -0.53 82.07 -0.28 82.22 -0.43 81.81 -0.03
5
6
7
8
Reline Lengths (mm) Breen: Max 5169 Min 4864 Willis: Max 5169 Min 4864 Alternate Stator OD: 165.1 mm
10,000
2.000
8,000
Fit Increase (mm)
Torque (Nm)
1.500
6,000
1.000
4,000
0.500
2,000
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 20 40 60 80 100 120 140
250 250
1514 LPM
1514 LPM
Mechanical Power (Kw)
200 200
Speed (rpm)
1041 LPM
150 150
1041 LPM
100 100
568 LPM
50 50
568 LPM
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 144
Power Section Specification (Metric Units) 625-5645
625-5645
6.25” 5:6
6.25" 5:6 Lobes
Lobes 4.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5004 mm Overall Length 3302 mm Flow Range 379-1514 LPM
Avg. Diameter 84.56 mm Tube OD 158.8 mm Rev per Unit Volume 0.18 Rev/L
Contour Length 4813 mm Contour Length 2896 mm Speed Range 68-273 RPM
Eccentricity 7.16 mm Tube ID 127.00 mm No Load Pressure Loss 1075 kPa
Major Diameter 98.88 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 88.90 mm Side 1: 203.2 mm Max Pressure 3,916 kPa 4,895 kPa 5,874 kPa 6,461 kPa
Head Length 190.5 mm Side 2: 203.2 mm Max Torque 3,101 N-m 3,877 N-m 4,652 N-m 5,117 N-m
Weight 221 kg Weight 190 kg Stall Pressure 6,265 kPa 7,832 kPa 9,398 kPa 10,338 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 4,962 N-m 6,203 N-m 7,443 N-m 8,188 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 84.61 -0.05 84.63 -0.08
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 3302 Min 2997 Willis: Max - Min - Alternate Stator OD: 165.1 mm
1.800
5,000
1.600
1.400
4,000
Fit Increase (mm)
Torque (Nm)
1.200
3,000 1.000
0.800
2,000
0.600
0.400
1,000
0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
1514 LPM
1514 LPM 120
250
Mechanical Power (Kw)
100
200
Speed (rpm)
80
150 946 LPM
60 946 LPM
100
40
50 379 LPM 20
0 379 LPM
0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 145
Power Section Specification (Metric Units) 625-5655
625-5655
6.25” 5:6
6.25" 5:6 Lobes
Lobes 5.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3086 mm Overall Length 5169 mm Flow Range 757-1893 LPM
Avg. Diameter 86.62 mm Tube OD 158.8 mm Rev per Unit Volume 0.14 Rev/L
Contour Length 2934 mm Contour Length 4763 mm Speed Range 106-267 RPM
Eccentricity 6.92 mm Tube ID 127.00 mm No Load Pressure Loss 1794 kPa
Major Diameter 100.47 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 88.90 mm Side 1: 203.2 mm Max Pressure 4,061 kPa 5,076 kPa 6,092 kPa 6,701 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 4,118 N-m 5,148 N-m 6,178 N-m 6,795 N-m
Weight 136 kg Weight 294 kg Stall Pressure 6,497 kPa 8,122 kPa 9,746 kPa 10,721 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 6,589 N-m 8,237 N-m 9,884 N-m 10,873 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 86.31 0.31 86.39 0.23
1
2
3
4
5
6
7 2-OS 87.81 -1.19 87.81 -1.19
8
Reline Lengths (mm) Breen: Max 5169 Min 4864 Willis: Max Min Alternate Stator OD: 155.6 mm
1.800
7,000
1.600
6,000
1.400
Fit Increase (mm)
5,000
Torque (Nm)
1.200
4,000 1.000
0.800
3,000
0.600
2,000
0.400
1,000
0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
200 120
Speed (rpm)
100 60
757 LPM
40
757 LPM
50
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 146
Power Section Specification (Metric Units) 625-7825
625-7825
6.25” 7:8
6.25" 7:8 Lobes
Lobes 2.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5017 mm Overall Length 5161 mm Flow Range 1136-1893 LPM
Avg. Diameter 93.85 mm Tube OD 158.8 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 4864 mm Contour Length 4780 mm Speed Range 48-80 RPM
Eccentricity 5.84 mm Tube ID 127.00 mm No Load Pressure Loss 1011 kPa
Major Diameter 105.54 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 88.90 mm Side 1: 190.5 mm Max Pressure 1,820 kPa 2,275 kPa 2,730 kPa 3,003 kPa
Head Length 152.4 mm Side 2: 190.5 mm Max Torque 5,865 N-m 7,331 N-m 8,797 N-m 9,677 N-m
Weight 271 kg Weight 310 kg Stall Pressure 2,912 kPa 3,640 kPa 4,368 kPa 4,804 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 9,384 N-m 11,730 N-m 14,076 N-m 15,481 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 93.37 0.48 93.07 0.79 93.37 0.48 92.99 0.86
1
2
3
4 OS 94.23 -0.38 93.88 -0.03 94.08 -0.23 93.75 0.10
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 5161 Min 4856 Alternate Stator OD: 165.1 mm
1.800
10,000
1.600
1.400
8,000
Fit Increase (mm)
Torque (Nm)
1.200
6,000 1.000
0.800
4,000
0.600
0.400
2,000
0.200
0 0.000
0 500 1,000 1,500 2,000 2,500 3,000 3,500 0 20 40 60 80 100 120 140
80 80
1893 LPM
70 70 1893 LPM
Mechanical Power (Kw)
60 60
1514 LPM
Speed (rpm)
50 50 1514 LPM
1136 LPM
40 40
30 30 1136 LPM
20 20
10 10
0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 147
Power Section Specification (Metric Units) 625-7828
625-7828
6.25” 7:8
6.25" 7:8 Lobes
Lobes 2.8 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2972 mm Overall Length 3150 mm Flow Range 568-1514 LPM
Avg. Diameter 89.67 mm Tube OD 158.8 mm Rev per Unit Volume 0.09 Rev/L
Contour Length 2819 mm Contour Length 2743 mm Speed Range 49-133 RPM
Eccentricity 5.72 mm Tube ID 127.00 mm No Load Pressure Loss 787 kPa
Major Diameter 101.10 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 88.90 mm Side 1: 203.2 mm Max Pressure 2,344 kPa 2,930 kPa 3,516 kPa 3,868 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 3,650 N-m 4,562 N-m 5,475 N-m 6,022 N-m
Weight 154 kg Weight 191 kg Stall Pressure 3,750 kPa 4,688 kPa 5,625 kPa 6,188 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 5,839 N-m 7,300 N-m 8,759 N-m 9,636 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 89.23 0.43 88.93 0.74 89.05 0.61 88.85 0.82
0 S OS 89.59 0.08 89.76 -0.10 89.38 0.28 89.66 0.00 89.79 -0.12 89.18 0.49
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 3302 Min 2997 Willis: Max 3302 Min 2845 Alternate Stator OD: 165.1 mm
6,000
2.000
5,000
Fit Increase (mm)
Torque (Nm)
1.500
4,000
3,000
1.000
2,000
0.500
1,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
1514 LPM 80
120
1514 LPM
70
Mechanical Power (Kw)
100
60
Speed (rpm)
80 1041 LPM
50
40 1041 LPM
60
30
40 568 LPM
20
20 568 LPM
10
0 0
0 1,000 2,000 3,000 4,000 5,000 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 148
Power Section Specification (Metric Units) 625-7829 (A)
625-7829 (A)
6.25” 7:8
6.25" 7:8 Lobes
Lobes 2.9 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5613 mm Overall Length 5812 mm Flow Range 757-1893 LPM
Avg. Diameter 94.92 mm Tube OD 158.8 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 5461 mm Contour Length 5405 mm Speed Range 31-79 RPM
Eccentricity 5.92 mm Tube ID 127.00 mm No Load Pressure Loss 867 kPa
Major Diameter 106.76 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 203.2 mm Max Pressure 2,441 kPa 3,051 kPa 3,662 kPa 4,028 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 7,943 N-m 9,929 N-m 11,915 N-m 13,106 N-m
Weight 312 kg Weight 348 kg Stall Pressure 3,905 kPa 4,882 kPa 5,858 kPa 6,444 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 12,707 N-m 15,887 N-m 19,063 N-m 20,970 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 94.67 0.25 94.41 0.51 94.44 0.48 94.21 0.71
0 S 94.92 0.00 94.82 0.10
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 5810 Min 5505 Willis: Max 5812 Min 5507 Alternate Stator OD: 165.1 mm
14,000 1.600
1.400
12,000
Fit Increase (mm)
1.200
10,000
Torque (Nm)
1.000
8,000
0.800
6,000
0.600
4,000
0.400
2,000 0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
80
1893 LPM 100
1893 LPM
70
Mechanical Power (Kw)
60 80
Speed (rpm)
50 1325 LPM
60
40 1325 LPM
30 40
757 LPM
20
20 757 LPM
10
0 0
0 1,000 2,000 3,000 4,000 5,000 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 149
Power Section Specification (Metric Units) 625-7830
625-7830
6.25”7:8
6.25" 7:8Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2972 mm Overall Length 3150 mm Flow Range 568-1514 LPM
Avg. Diameter 89.28 mm Tube OD 158.8 mm Rev per Unit Volume 0.08 Rev/L
Contour Length 2819 mm Contour Length 2743 mm Speed Range 46-124 RPM
Eccentricity 5.91 mm Tube ID 127.00 mm No Load Pressure Loss 731 kPa
Major Diameter 101.09 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 88.90 mm Side 1: 203.2 mm Max Pressure 2,620 kPa 3,275 kPa 3,930 kPa 4,323 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 4,353 N-m 5,442 N-m 6,530 N-m 7,183 N-m
Weight 164 kg Weight 188 kg Stall Pressure 4,192 kPa 5,240 kPa 6,288 kPa 6,916 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 6,966 N-m 8,707 N-m 10,449 N-m 11,492 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 89.13 0.15 88.87 0.41 89.23 0.05 88.72 0.56
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max Min Willis: Max 3150 Min 2845 Alternate Stator OD: 165.1 mm
8,000
2.000
7,000
6,000
Fit Increase (mm)
Torque (Nm)
1.500
5,000
4,000
1.000
3,000
2,000
0.500
1,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
90
120
1514 LPM 1514 LPM
80
Mechanical Power (Kw)
100 70
Speed (rpm)
60
80
1041 LPM
50
1041 LPM
60
40
40 30
568 LPM
20
20 568 LPM
10
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 150
Power Section Specification (Metric Units) 625-7835
625-7835
6.25” 7:8
6.25" 7:8 Lobes
Lobes 3.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5645 mm Overall Length 5874 mm Flow Range 568-1514 LPM
Avg. Diameter 91.95 mm Tube OD 158.8 mm Rev per Unit Volume 0.05 Rev/L
Contour Length 5493 mm Contour Length 5467 mm Speed Range 31-83 RPM
Eccentricity 5.72 mm Tube ID 127.00 mm No Load Pressure Loss 779 kPa
Major Diameter 103.38 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 88.90 mm Side 1: 203.2 mm Max Pressure 3,178 kPa 3,973 kPa 4,767 kPa 5,244 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 7,923 N-m 9,903 N-m 11,884 N-m 13,072 N-m
Weight 292 kg Weight 356 kg Stall Pressure 5,084 kPa 6,356 kPa 7,627 kPa 8,389 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 12,674 N-m 15,846 N-m 19,014 N-m 20,914 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 91.31 0.63 91.03 0.91 91.34 0.61 90.93 1.02
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max Min Willis: Max 5875 Min 5570 Alternate Stator OD: 165.1 mm
1.800
14,000
1.600
12,000
1.400
Fit Increase (mm)
10,000
Torque (Nm)
1.200
8,000 1.000
0.800
6,000
0.600
4,000
0.400
2,000
0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 0 20 40 60 80 100 120 140
80
1514 LPM
100 1514 LPM
70
Mechanical Power (Kw)
60 80
Speed (rpm)
50 1041 LPM
60
40 1041 LPM
30 40
568 LPM
20
20
568 LPM
10
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 151
Power Section Specification (Metric Units) 625-7848
625-7848
6.25” 7:8
6.25" 7:8 Lobes
Lobes 4.8 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4953 mm Overall Length 5161 mm Flow Range 757-1893 LPM
Avg. Diameter 89.67 mm Tube OD 158.8 mm Rev per Unit Volume 0.09 Rev/L
Contour Length 4788 mm Contour Length 4755 mm Speed Range 67-168 RPM
Eccentricity 5.72 mm Tube ID 127.00 mm No Load Pressure Loss 966 kPa
Major Diameter 101.10 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 88.90 mm Side 1: 203.2 mm Max Pressure 4,461 kPa 5,576 kPa 6,692 kPa 7,361 kPa
Head Length 165.1 mm Side 2: 203.2 mm Max Torque 6,863 N-m 8,579 N-m 10,294 N-m 11,324 N-m
Weight 256 kg Weight 313 kg Stall Pressure 7,137 kPa 8,922 kPa 10,706 kPa 11,777 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 10,980 N-m 13,726 N-m 16,471 N-m 18,118 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 89.05 0.61 88.80 0.87 89.05 0.61 88.62 1.04
0 S OS 89.81 -0.15 89.94 -0.28 89.69 -0.02 89.71 -0.05 89.61 0.05 89.46 0.21
1
2
3
4 OS 90.40 -0.73 90.35 -0.68
5
6
7
8
Reline Lengths (mm) Breen: Max 5169 Min 4813 Willis: Max 5161 Min 4856 Alternate Stator OD: 165.1 mm
12,000
2.000
10,000
Fit Increase (mm)
Torque (Nm)
1.500
8,000
6,000
1.000
4,000
0.500
2,000
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
160 180
1893 LPM 1893 LPM
160
140
Mechanical Power (Kw)
140
120
Speed (rpm)
40 40
757 LPM
20 20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 152
Power Section Specification (Metric Units) 650-5635
650-5635
6.5” 5:6 Lobes
6.5" Lobes3.5
3.5Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2845 mm Overall Length 3097 mm Flow Range 1136-2271 LPM
Avg. Diameter 92.96 mm Tube OD 165.1 mm Rev per Unit Volume 0.14 Rev/L
Contour Length 2660 mm Contour Length 2589 mm Speed Range 157-315 RPM
Eccentricity 7.11 mm Tube ID 133.35 mm No Load Pressure Loss 1042 kPa
Major Diameter 107.19 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 107.19 mm Side 1: 254.0 mm Max Pressure 2,641 kPa 3,301 kPa 3,962 kPa 4,358 kPa
Head Length 185.1 mm Side 2: 254.0 mm Max Torque 2,720 N-m 3,400 N-m 4,080 N-m 4,488 N-m
Weight 129 kg Weight 201 kg Stall Pressure 4,225 kPa 5,282 kPa 6,338 kPa 6,972 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 4,352 N-m 5,441 N-m 6,529 N-m 7,182 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 93.01 -0.05 92.46 0.51 92.79 0.18 92.30 0.66
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 3096 Min 2791 Alternate Stator OD: - mm
5,000
2.000
4,000
Fit Increase (mm)
Torque (Nm)
1.500
3,000
1.000
2,000
0.500
1,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
140
300
2271 LPM 2271 LPM
Mechanical Power (Kw)
120
250
200
80 1703 LPM
150
1136 LPM 60
100
40 1136 LPM
50 20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 153
Power Section Specification (Metric Units) 650-8930
650-8930
6.5”8:9
6.5" 8:9Lobes
Lobes 33 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3010 mm Overall Length 3175 mm Flow Range 757-1514 LPM
Avg. Diameter 104.47 mm Tube OD 165.1 mm Rev per Unit Volume 0.06 Rev/L
Contour Length 2822 mm Contour Length 2807 mm Speed Range 48-96 RPM
Eccentricity 6.18 mm Tube ID 139.70 mm No Load Pressure Loss 730 kPa
Major Diameter 116.84 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 184.2 mm Max Pressure 2,875 kPa 3,594 kPa 4,313 kPa 4,744 kPa
Head Length 188.0 mm Side 2: 184.2 mm Max Torque 6,015 N-m 7,519 N-m 9,023 N-m 9,926 N-m
Weight 228 kg Weight 161 kg Stall Pressure 4,600 kPa 5,750 kPa 6,900 kPa 7,590 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 9,625 N-m 12,031 N-m 14,438 N-m 15,881 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 103.28 1.19 103.28 1.19 103.00 1.47 103.25 1.22 103.33 1.14 102.87 1.60
1
2
3
4 OS OS 104.39 0.08 104.29 0.18 103.96 0.51 104.39 0.08 104.42 0.05 104.01 0.46
5
6
7
8
Reline Lengths (mm) Breen: Max 3330 Min 2972 Willis: Max 3327 Min 2870 Alternate Stator OD: 171.5 mm
1.800
10,000
1.600
1.400
8,000
Fit Increase (mm)
Torque (Nm)
1.200
6,000 1.000
0.800
4,000
0.600
0.400
2,000
0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 0 20 40 60 80 100 120 140
100 100
Mechanical Power (Kw)
1136 LPM
60 60
1136 LPM
40 757 LPM 40
757 LPM
20 20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 154
Power Section Specification (Metric Units) 650-8940
650-8940
6.5”8:9
6.5" 8:9Lobes
Lobes 44 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3861 mm Overall Length 4318 mm Flow Range 757-1893 LPM
Avg. Diameter 98.76 mm Tube OD 165.1 mm Rev per Unit Volume 0.05 Rev/L
Contour Length 3708 mm Contour Length 3913 mm Speed Range 34-86 RPM
Eccentricity 5.49 mm Tube ID 133.35 mm No Load Pressure Loss 958 kPa
Major Diameter 109.73 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 96.52 mm Side 1: 203.2 mm Max Pressure 3,992 kPa 4,990 kPa 5,988 kPa 6,587 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 11,670 N-m 14,587 N-m 17,505 N-m 19,255 N-m
Weight 235 kg Weight 248 kg Stall Pressure 6,387 kPa 7,984 kPa 9,580 kPa 10,538 kPa
Thread Form 62C0005 Material Alloy Steel Stall Torque 18,671 N-m 23,340 N-m 28,005 N-m 30,806 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1
2
3 S S 98.55 0.20 98.43 0.33 98.04 0.71 98.45 0.30 98.37 0.38 97.92 0.84
4
5
6
7
8
Reline Lengths (mm) Breen: Max 4321 Min 3965 Willis: Max Min Alternate Stator OD: 0 mm
1.800
20,000 1.600
1.400
Fit Increase (mm)
Torque (Nm)
15,000 1.200
1.000
10,000 0.800
0.600
5,000 0.400
0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
90 160
1893 LPM
80 1893 LPM 140
Mechanical Power (Kw)
70
120
Speed (rpm)
60
1325 LPM 100
50 1325 LPM
80
40
60
30 757 LPM
40
20
757 LPM
10 20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 155
Power Section Specification (Metric Units) 650-91037
650-91037
6.5”
6.5" 9:10
9:10Lobes
Lobes3.7
3.7Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5296 mm Overall Length 5448 mm Flow Range 757-1893 LPM
Avg. Diameter 92.54 mm Tube OD 165.1 mm Rev per Unit Volume 0.05 Rev/L
Contour Length 5105 mm Contour Length 5042 mm Speed Range 35-88 RPM
Eccentricity 4.63 mm Tube ID 139.70 mm No Load Pressure Loss 1386 kPa
Major Diameter 101.80 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 104.14 mm Side 1: 203.2 mm Max Pressure 2,255 kPa 2,819 kPa 3,383 kPa 3,721 kPa
Head Length 190.5 mm Side 2: 203.2 mm Max Torque 6,273 N-m 7,841 N-m 9,409 N-m 10,350 N-m
Weight 272 kg Weight 305 kg Stall Pressure 3,608 kPa 4,510 kPa 5,412 kPa 5,953 kPa
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 10,036 N-m 12,546 N-m 15,055 N-m 16,560 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 92.71 -0.17 92.41 0.14 92.76 -0.22 92.20 0.34
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 5448 Min 5144 Alternate Stator OD: - mm
10,000 2.500
8,000
Fit Increase (mm)
2.000
Torque (Nm)
6,000 1.500
4,000 1.000
2,000 0.500
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
90 90
1893 LPM
1893 LPM 80
80
Mechanical Power (Kw)
70 70
Speed (rpm)
60 60
1325 LPM
50 50
1325 LPM
40 40
30 757 LPM 30
20 20
757 LPM
10 10
0 0
0 1,000 2,000 3,000 4,000 5,000 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 156
Power Section Specification (Metric Units) 650-91040
650-91040
6.5” 9:10
6.5" 9:10 Lobes 44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3721 mm Overall Length 3861 mm Flow Range 757-1893 LPM
Avg. Diameter 92.80 mm Tube OD 165.1 mm Rev per Unit Volume 0.09 Rev/L
Contour Length 3531 mm Contour Length 3454 mm Speed Range 70-175 RPM
Eccentricity 4.55 mm Tube ID 139.70 mm No Load Pressure Loss 1372 kPa
Major Diameter 101.90 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 104.14 mm Side 1: 203.2 mm Max Pressure 3,640 kPa 4,550 kPa 5,460 kPa 6,006 kPa
Head Length 190.5 mm Side 2: 203.2 mm Max Torque 5,115 N-m 6,394 N-m 7,673 N-m 8,440 N-m
Weight 195 kg Weight 214 kg Stall Pressure 5,824 kPa 7,280 kPa 8,736 kPa 9,609 kPa
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 8,184 N-m 10,230 N-m 12,277 N-m 13,504 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 93.07 -0.27 92.76 0.04 92.99 -0.19 92.53 0.27
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 3861 Min 3556 Alternate Stator OD: - mm
9,000
2.500
8,000
7,000
Fit Increase (mm)
2.000
Torque (Nm)
6,000
5,000 1.500
4,000
1.000
3,000
2,000
0.500
1,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 20 40 60 80 100 120 140
180
140
1893 LPM
160 1893 LPM
Mechanical Power (Kw)
120
140
100
Speed (rpm)
120
1325 LPM
100 80 1325 LPM
80
60
60 757 LPM
40
40
757 LPM
20
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 157
Power Section Specification (Metric Units) 675-2370
675-2370
6.75”2:3
6.75" 2:3Lobes
Lobes77Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4928 mm Overall Length 5080 mm Flow Range 1136-2271 LPM
Avg. Diameter 74.80 mm Tube OD 171.5 mm Rev per Unit Volume 0.20 Rev/L
Contour Length 4775 mm Contour Length 4675 mm Speed Range 228-457 RPM
Eccentricity 12.37 mm Tube ID 139.70 mm No Load Pressure Loss 876 kPa
Major Diameter 99.54 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 99.57 mm Side 1: 203.2 mm Max Pressure 5,523 kPa 6,904 kPa 8,285 kPa 9,113 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 4,187 N-m 5,234 N-m 6,281 N-m 6,909 N-m
Weight 174 kg Weight 349 kg Stall Pressure 8,836 kPa 11,046 kPa 13,255 kPa 14,580 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 6,699 N-m 8,374 N-m 10,049 N-m 11,054 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1
2
3
4 OS 76.02 -1.23 76.23 -1.43
5
6
7
8
Reline Lengths (mm) Breen: Max 5080 Min 4775 Willis: Max - Min - Alternate Stator OD: - mm
7,000
2.500
6,000
Fit Increase (mm)
2.000
5,000
Torque (Nm)
4,000 1.500
3,000
1.000
2,000
0.500
1,000
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 0 20 40 60 80 100 120 140
450
2271 LPM 300
2271 LPM
400
Mechanical Power (Kw)
350 250
1703 LPM
Speed (rpm)
300
200
1703 LPM
250
150
200 1136 LPM
150 100
1136 LPM
100
50
50
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 158
Power Section Specification (Metric Units) 675-2380
675-2380
6.75”2:3
6.75" 2:3Lobes
Lobes88Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5144 mm Overall Length 5334 mm Flow Range 1136-2271 LPM
Avg. Diameter 76.71 mm Tube OD 171.5 mm Rev per Unit Volume 0.23 Rev/L
Contour Length 4966 mm Contour Length 4953 mm Speed Range 262-525 RPM
Eccentricity 12.70 mm Tube ID 139.70 mm No Load Pressure Loss 721 kPa
Major Diameter 102.11 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 88.90 mm Side 1: 190.5 mm Max Pressure 6,529 kPa 8,161 kPa 9,794 kPa 10,773 kPa
Head Length 177.8 mm Side 2: 190.5 mm Max Torque 4,310 N-m 5,387 N-m 6,465 N-m 7,111 N-m
Weight 188 kg Weight 366 kg Stall Pressure 10,446 kPa 13,058 kPa 15,669 kPa 17,236 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 6,896 N-m 8,620 N-m 10,344 N-m 11,378 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 75.72 0.99 75.03 1.68 75.54 1.17 74.90 1.80
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 5334 Min 5029 Alternate Stator OD: - mm
7,000 3.500
6,000 3.000
Fit Increase (mm)
5,000 2.500
Torque (Nm)
4,000 2.000
3,000 1.500
2,000 1.000
1,000 0.500
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 20 40 60 80 100 120 140
300
400
250
Speed (rpm)
1703 LPM
1703 LPM
300 200
100
50
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 159
Power Section Specification (Metric Units) 675-4548
675-4548
6.75” 4:5
6.75" 4:5 Lobes
Lobes 4.8 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3594 mm Overall Length 3772 mm Flow Range 1136-2271 LPM
Avg. Diameter 89.15 mm Tube OD 171.5 mm Rev per Unit Volume 0.13 Rev/L
Contour Length 3412 mm Contour Length 3391 mm Speed Range 148-297 RPM
Eccentricity 9.02 mm Tube ID 139.70 mm No Load Pressure Loss 827 kPa
Major Diameter 107.19 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 190.5 mm Max Pressure 3,951 kPa 4,939 kPa 5,927 kPa 6,519 kPa
Head Length 181.9 mm Side 2: 190.5 mm Max Torque 4,415 N-m 5,518 N-m 6,622 N-m 7,284 N-m
Weight 184 kg Weight 254 kg Stall Pressure 6,321 kPa 7,902 kPa 9,482 kPa 10,430 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 7,063 N-m 8,830 N-m 10,595 N-m 11,655 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 88.54 0.61 88.14 1.02 88.62 0.53 87.91 1.24
0 S OS 89.31 -0.15 89.64 -0.48 89.18 -0.03 89.43 -0.28 89.64 -0.48 88.72 0.43
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 3899 Min 3543 Willis: Max 3886 Min 3467 Alternate Stator OD: 165.1/177.8 mm
8,000
2.500
7,000
6,000
Fit Increase (mm)
2.000
Torque (Nm)
5,000
1.500
4,000
3,000 1.000
2,000
0.500
1,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
300
2271 LPM 200 2271 LPM
Mechanical Power (Kw)
250
Speed (rpm)
150
200 1703 LPM
1703 LPM
150
100
1136 LPM
100
1136 LPM
50
50
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 160
Power Section Specification (Metric Units) 675-4550
675-4550
6.75”4:5
6.75" 4:5Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3467 mm Overall Length 3708 mm Flow Range 757-1893 LPM
Avg. Diameter 91.36 mm Tube OD 171.5 mm Rev per Unit Volume 0.14 Rev/L
Contour Length 3269 mm Contour Length 3302 mm Speed Range 105-264 RPM
Eccentricity 9.19 mm Tube ID 139.70 mm No Load Pressure Loss 733 kPa
Major Diameter 109.75 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 104.78 mm Side 1: 203.2 mm Max Pressure 4,247 kPa 5,309 kPa 6,371 kPa 7,008 kPa
Head Length 198.4 mm Side 2: 203.2 mm Max Torque 4,453 N-m 5,566 N-m 6,679 N-m 7,347 N-m
Weight 185 kg Weight 248 kg Stall Pressure 6,795 kPa 8,494 kPa 10,192 kPa 11,212 kPa
Thread Form 2 3/8" API IF Material Alloy Steel Stall Torque 7,124 N-m 8,906 N-m 10,686 N-m 11,756 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 90.22 1.14 89.76 1.60 90.14 1.22 89.56 1.80
1
2
3
4 OS 91.80 -0.43 91.39 -0.03 91.74 -0.38 91.21 0.15
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 3708 Min 3404 Alternate Stator OD: - mm
8,000
2.500
7,000
6,000
Fit Increase (mm)
2.000
Torque (Nm)
5,000
1.500
4,000
3,000 1.000
2,000
0.500
1,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
1893 LPM
200
Speed (rpm)
150
1325 LPM
150
50
50
757 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 161
Power Section Specification (Metric Units) 675-4570
675-4570
6.75”4:5
6.75" 4:5Lobes
Lobes77Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5144 mm Overall Length 5334 mm Flow Range 1136-2271 LPM
Avg. Diameter 89.15 mm Tube OD 171.5 mm Rev per Unit Volume 0.13 Rev/L
Contour Length 4966 mm Contour Length 4953 mm Speed Range 149-298 RPM
Eccentricity 9.02 mm Tube ID 139.70 mm No Load Pressure Loss 828 kPa
Major Diameter 107.19 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 190.5 mm Max Pressure 6,157 kPa 7,696 kPa 9,236 kPa 10,159 kPa
Head Length 177.8 mm Side 2: 190.5 mm Max Torque 6,869 N-m 8,586 N-m 10,304 N-m 11,334 N-m
Weight 262 kg Weight 360 kg Stall Pressure 9,851 kPa 12,314 kPa 14,776 kPa 16,254 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 10,991 N-m 13,739 N-m 16,486 N-m 18,135 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T U/S S 88.54 0.61 88.54 0.61 88.09 1.07 88.57 0.58 88.21 0.94 88.06 1.09
0 S OS 89.38 -0.23 89.66 -0.51 89.33 -0.18 89.31 -0.15 89.38 -0.23 89.20 -0.05
1
2 0.5-OS 1.5-OS 89.48 -0.33 89.46 -0.30 89.66 -0.51 89.79 -0.64 89.41 -0.25
3
4 OS 2-OS 90.22 -1.07 90.42 -1.27 89.81 -0.66 90.14 -0.99 90.22 -1.07 89.66 -0.51
5
6
7
8
Reline Lengths (mm) Breen: Max 5451 Min 5095 Willis: Max 5436 Min 5029 Alternate Stator OD: 165.1/177.8 mm
12,000
2.500
10,000
Fit Increase (mm)
2.000
Torque (Nm)
8,000
1.500
6,000
1.000
4,000
0.500
2,000
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 0 20 40 60 80 100 120 140
350
300
2271 LPM 2271 LPM
Mechanical Power (Kw)
300
250
250
Speed (rpm)
100
100 1136 LPM
50 50
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 162
Power Section Specification (Metric Units) 675-5650 (A)
675-5650 (A)
6.75”5:6
6.75" 5:6Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4458 mm Overall Length 4610 mm Flow Range 1136-2271 LPM
Avg. Diameter 90.72 mm Tube OD 171.5 mm Rev per Unit Volume 0.10 Rev/L
Contour Length 4267 mm Contour Length 4172 mm Speed Range 114-228 RPM
Eccentricity 7.79 mm Tube ID 138.43 mm No Load Pressure Loss 916 kPa
Major Diameter 106.30 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 108.84 mm Side 1: 219.1 mm Max Pressure 4,254 kPa 5,318 kPa 6,381 kPa 7,019 kPa
Head Length 190.5 mm Side 2: 219.1 mm Max Torque 6,045 N-m 7,556 N-m 9,068 N-m 9,975 N-m
Weight 221 kg Weight 322 kg Stall Pressure 6,806 kPa 8,508 kPa 10,209 kPa 11,230 kPa
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 9,672 N-m 12,091 N-m 14,508 N-m 15,959 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 90.73 -0.01 90.20 0.52 90.70 0.01 89.99 0.72
1
2
3
4
5
6
7 2-OS 91.77 -1.05 91.29 -0.57 91.77 -1.05 91.11 -0.39
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 4610 Min 4305 Alternate Stator OD: - mm
10,000 2.500
8,000
Fit Increase (mm)
2.000
Torque (Nm)
6,000 1.500
4,000 1.000
2,000 0.500
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
1703 LPM
Speed (rpm)
150 150
1703 LPM
1136 LPM
50 50
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 163
Power Section Specification (Metric Units) 675-5650 (B)
675-5650 (B)
6.75”5:6
6.75" 5:6Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4826 mm Overall Length 4991 mm Flow Range 1136-2271 LPM
Avg. Diameter 85.82 mm Tube OD 171.5 mm Rev per Unit Volume 0.05 Rev/L
Contour Length 4674 mm Contour Length 4585 mm Speed Range 58-116 RPM
Eccentricity 7.46 mm Tube ID 139.70 mm No Load Pressure Loss 738 kPa
Major Diameter 100.74 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 203.2 mm Max Pressure 3,985 kPa 4,981 kPa 5,978 kPa 6,575 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 11,172 N-m 13,965 N-m 16,758 N-m 18,433 N-m
Weight 234 kg Weight 289 kg Stall Pressure 6,376 kPa 7,970 kPa 9,564 kPa 10,520 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 17,875 N-m 22,344 N-m 26,813 N-m 29,493 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 86.13 -0.32 86.21 -0.39
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 4991 Min 4724 Willis: Max - Min - Alternate Stator OD: - mm
20,000 2.000
Fit Increase (mm)
Torque (Nm)
15,000 1.500
10,000 1.000
5,000 0.500
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
120
200 2271 LPM
2271 LPM
Mechanical Power (Kw)
100
Speed (rpm)
150
80 1703 LPM
1703 LPM
60
100
1136 LPM
40
1136 LPM
50
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 164
Power Section Specification (Metric Units) 675-5668
675-5668
6.75” 5:6
6.75" 5:6 Lobes
Lobes 6.8 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5639 mm Overall Length 5766 mm Flow Range 1136-2271 LPM
Avg. Diameter 93.73 mm Tube OD 171.5 mm Rev per Unit Volume 0.09 Rev/L
Contour Length 5420 mm Contour Length 5359 mm Speed Range 97-194 RPM
Eccentricity 7.96 mm Tube ID 139.70 mm No Load Pressure Loss 1598 kPa
Major Diameter 109.64 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 104.90 mm Side 1: 203.2 mm Max Pressure 5,405 kPa 6,756 kPa 8,108 kPa 8,918 kPa
Head Length 218.4 mm Side 2: 203.2 mm Max Torque 9,040 N-m 11,300 N-m 13,560 N-m 14,916 N-m
Weight 316 kg Weight 402 kg Stall Pressure 8,648 kPa 10,810 kPa 12,972 kPa 14,269 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 14,464 N-m 18,081 N-m 21,697 N-m 23,866 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 93.45 0.28 93.27 0.46
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 5766 Min 5486 Willis: Max - Min - Alternate Stator OD: 165.1 mm
16,000
2.000
14,000
12,000
Fit Increase (mm)
Torque (Nm)
1.500
10,000
8,000
1.000
6,000
4,000
0.500
2,000
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 0 20 40 60 80 100 120 140
2271 LPM
250
200
Mechanical Power (Kw)
2271 LPM
200
Speed (rpm)
150
1703 LPM
1703 LPM 150
100
1136 LPM 100
1136 LPM
50
50
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 165
Power Section Specification (Metric Units) 675-6750
675-6750
6.75”6:7
6.75" 6:7Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4928 mm Overall Length 5080 mm Flow Range 1136-2271 LPM
Avg. Diameter 94.98 mm Tube OD 171.5 mm Rev per Unit Volume 0.07 Rev/L
Contour Length 4775 mm Contour Length 4712 mm Speed Range 85-170 RPM
Eccentricity 7.32 mm Tube ID 139.70 mm No Load Pressure Loss 901 kPa
Major Diameter 109.62 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 184.2 mm Max Pressure 4,619 kPa 5,774 kPa 6,929 kPa 7,621 kPa
Head Length 152.4 mm Side 2: 184.2 mm Max Torque 8,631 N-m 10,789 N-m 12,947 N-m 14,241 N-m
Weight 273 kg Weight 339 kg Stall Pressure 7,390 kPa 9,238 kPa 11,085 kPa 12,194 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,809 N-m 17,262 N-m 20,714 N-m 22,786 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T US S 94.97 0.00 94.87 0.11 94.54 0.44 94.74 0.23 94.69 0.28 94.49 0.49
0 S 95.25 -0.27 95.10 -0.12
1
2
3 OS 95.48 -0.50 95.15 -0.17 95.38 -0.40 94.89 0.08
4 OS 95.83 -0.86 95.68 -0.71
5
6 2-OS 96.37 -1.39 95.96 -0.99 95.99 -1.01 95.76 -0.78
7 2-OS 96.19 -1.21 96.32 -1.34
8
Reline Lengths (mm) Breen: Max 5080 Min 4724 Willis: Max 5232 Min 4775 Alternate Stator OD: 165.1/177.8 mm
16,000
2.000
14,000
12,000
Fit Increase (mm)
Torque (Nm)
1.500
10,000
8,000
1.000
6,000
4,000
0.500
2,000
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
2271 LPM
120 200
1703 LPM
Speed (rpm)
100
150
80 1703 LPM
1136 LPM
60 100
40 1136 LPM
50
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 166
Power Section Specification (Metric Units) 675-6760
675-6760
6.75”6:7
6.75" 6:7Lobes
Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6147 mm Overall Length 6350 mm Flow Range 1136-2271 LPM
Avg. Diameter 94.98 mm Tube OD 171.5 mm Rev per Unit Volume 0.06 Rev/L
Contour Length 5994 mm Contour Length 5944 mm Speed Range 70-141 RPM
Eccentricity 7.32 mm Tube ID 139.70 mm No Load Pressure Loss 1626 kPa
Major Diameter 109.62 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 203.2 mm Max Pressure 5,309 kPa 6,636 kPa 7,964 kPa 8,760 kPa
Head Length 152.4 mm Side 2: 203.2 mm Max Torque 11,896 N-m 14,870 N-m 17,844 N-m 19,628 N-m
Weight 336 kg Weight 441 kg Stall Pressure 8,494 kPa 10,618 kPa 12,741 kPa 14,015 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 19,033 N-m 23,792 N-m 28,549 N-m 31,404 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 95.25 -0.27 94.97 0.00
1
2
3
4 OS 95.76 -0.78 95.63 -0.66
5
6
7
8
Reline Lengths (mm) Breen: Max 6350 Min 5994 Willis: Max - Min - Alternate Stator OD: 165.1 mm
1.800
20,000 1.600
1.400
Fit Increase (mm)
Torque (Nm)
15,000 1.200
1.000
10,000 0.800
0.600
5,000 0.400
0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
140
250 2271 LPM
2271 LPM
Mechanical Power (Kw)
120
200
100
Speed (rpm)
1703 LPM
1703 LPM
80 150
60 1136 LPM
100
1136 LPM
40
50
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 167
Power Section Specification (Metric Units) 675-7820 (A)
675-7820 (A)
6.75”7:8
6.75" 7:8Lobes
Lobes22Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3734 mm Overall Length 3899 mm Flow Range 1136-2271 LPM
Avg. Diameter 101.35 mm Tube OD 171.5 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 3546 mm Contour Length 3493 mm Speed Range 42-85 RPM
Eccentricity 6.48 mm Tube ID 139.70 mm No Load Pressure Loss 967 kPa
Major Diameter 114.30 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 203.2 mm Max Pressure 1,289 kPa 1,611 kPa 1,934 kPa 2,127 kPa
Head Length 188.0 mm Side 2: 203.2 mm Max Torque 4,713 N-m 5,891 N-m 7,070 N-m 7,777 N-m
Weight 248 kg Weight 256 kg Stall Pressure 2,062 kPa 2,578 kPa 3,093 kPa 3,402 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 7,540 N-m 9,426 N-m 11,310 N-m 12,440 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 101.04 0.30 100.74 0.61 101.17 0.18 100.56 0.79
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max Min Willis: Max 3899 Min 3594 Alternate Stator OD: 165.1 mm
8,000
2.000
7,000
6,000
Fit Increase (mm)
Torque (Nm)
1.500
5,000
4,000
1.000
3,000
2,000
0.500
1,000
0 0.000
0 500 1,000 1,500 2,000 2,500 0 20 40 60 80 100 120 140
70
Mechanical Power (Kw)
50
60
1703 LPM
Speed (rpm)
50 40
1703 LPM
40 30
1136 LPM
30
20 1136 LPM
20
10
10
0 0
0 500 1,000 1,500 2,000 2,500 3,000 0 500 1,000 1,500 2,000 2,500 3,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 168
Power Section Specification (Metric Units) 675-7820 (B)
675-7820 (B)
6.75”7:8
6.75" 7:8Lobes
Lobes22Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3734 mm Overall Length 3899 mm Flow Range 757-1893 LPM
Avg. Diameter 96.72 mm Tube OD 171.5 mm Rev per Unit Volume 0.03 Rev/L
Contour Length 3564 mm Contour Length 3493 mm Speed Range 21-53 RPM
Eccentricity 6.20 mm Tube ID 139.70 mm No Load Pressure Loss 1570 kPa
Major Diameter 109.11 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 203.2 mm Max Pressure 710 kPa 888 kPa 1,065 kPa 1,172 kPa
Head Length 170.2 mm Side 2: 203.2 mm Max Torque 3,455 N-m 4,319 N-m 5,183 N-m 5,701 N-m
Weight 205 kg Weight 262 kg Stall Pressure 1,136 kPa 1,420 kPa 1,704 kPa 1,874 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 5,528 N-m 6,910 N-m 8,293 N-m 9,120 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T US 95.78 0.93 95.78 0.93
0 S 96.57 0.14 96.34 0.37
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 3899 Min 3543 Willis: Max Min Alternate Stator OD: 165.1 mm
1.800
6,000
1.600
5,000 1.400
Fit Increase (mm)
Torque (Nm)
1.200
4,000
1.000
3,000
0.800
2,000 0.600
0.400
1,000
0.200
0 0.000
0 200 400 600 800 1,000 1,200 1,400 0 20 40 60 80 100 120 140
50 1893 LPM 25
Mechanical Power (Kw)
40 20
Speed (rpm)
20 10
757 LPM
757 LPM
10 5
0 0
0 200 400 600 800 1,000 1,200 1,400 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 169
Power Section Specification (Metric Units) 675-7821
675-7821
6.75” 7:8
6.75" 7:8 Lobes
Lobes 2.1 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5613 mm Overall Length 5842 mm Flow Range 1136-2271 LPM
Avg. Diameter 96.98 mm Tube OD 171.5 mm Rev per Unit Volume 0.03 Rev/L
Contour Length 5410 mm Contour Length 5385 mm Speed Range 35-70 RPM
Eccentricity 5.68 mm Tube ID 134.87 mm No Load Pressure Loss 1174 kPa
Major Diameter 108.33 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 228.6 mm Max Pressure 1,220 kPa 1,525 kPa 1,830 kPa 2,013 kPa
Head Length 203.2 mm Side 2: 228.6 mm Max Torque 5,358 N-m 6,698 N-m 8,038 N-m 8,842 N-m
Weight 305 kg Weight 439 kg Stall Pressure 1,952 kPa 2,440 kPa 2,928 kPa 3,220 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 8,574 N-m 10,717 N-m 12,861 N-m 14,143 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 97.10 -0.13 96.85 0.13 97.03 -0.05 96.72 0.25
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 5842 Min 5537 Alternate Stator OD: 177.8 mm
9,000
8,000 2.000
7,000
Fit Increase (mm)
Torque (Nm)
6,000 1.500
5,000
4,000 1.000
3,000
2,000 0.500
1,000
0 0.000
0 500 1,000 1,500 2,000 2,500 0 20 40 60 80 100 120 140
70 60
2271 LPM 2271 LPM
Mechanical Power (Kw)
60
50
50
Speed (rpm)
1703 LPM
40
40 1703 LPM
30
30 1136 LPM
20
20 1136 LPM
10
10
0 0
0 500 1,000 1,500 2,000 2,500 0 500 1,000 1,500 2,000 2,500
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 170
Power Section Specification (Metric Units) 675-7829 (B)
675-7829 (B)
6.75” 7:8
6.75" 7:8 Lobes
Lobes 2.9 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5423 mm Overall Length 5588 mm Flow Range 1136-2271 LPM
Avg. Diameter 96.72 mm Tube OD 171.5 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 5245 mm Contour Length 5182 mm Speed Range 50-100 RPM
Eccentricity 6.20 mm Tube ID 139.70 mm No Load Pressure Loss 1109 kPa
Major Diameter 109.11 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 203.2 mm Max Pressure 2,282 kPa 2,853 kPa 3,423 kPa 3,765 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 7,091 N-m 8,864 N-m 10,637 N-m 11,701 N-m
Weight 296 kg Weight 379 kg Stall Pressure 3,651 kPa 4,564 kPa 5,476 kPa 6,024 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 11,346 N-m 14,183 N-m 17,017 N-m 18,720 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 96.29 0.43 95.94 0.78 95.99 0.73 95.66 1.06
0 S 96.55 0.17 96.42 0.30
1
2 0.5-OS OS 96.90 -0.18 97.08 -0.36 96.80 -0.08 97.05 -0.33 97.03 -0.31 96.77 -0.05
3
4
5 OS 97.92 -1.20 97.74 -1.02
6
7
8
Reline Lengths (mm) Breen: Max 5588 Min 5232 Willis: Max 5588 Min 5283 Alternate Stator OD: 165.1 mm
12,000
2.000
10,000
Fit Increase (mm)
Torque (Nm)
1.500
8,000
6,000
1.000
4,000
0.500
2,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
120
100
2271 LPM 2271 LPM
Mechanical Power (Kw)
100
80
Speed (rpm)
1703 LPM 80
60
1703 LPM
60
40 1136 LPM
40
1136 LPM
20
20
0 0
0 1,000 2,000 3,000 4,000 5,000 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 171
Power Section Specification (Metric Units) 675-7830 (A)
675-7830 (A)
6.75”7:8
6.75" 7:8Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3010 mm Overall Length 3175 mm Flow Range 1136-2271 LPM
Avg. Diameter 101.82 mm Tube OD 171.5 mm Rev per Unit Volume 0.07 Rev/L
Contour Length 2828 mm Contour Length 2807 mm Speed Range 84-169 RPM
Eccentricity 6.50 mm Tube ID 139.70 mm No Load Pressure Loss 1003 kPa
Major Diameter 114.81 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 184.2 mm Max Pressure 2,461 kPa 3,076 kPa 3,692 kPa 4,061 kPa
Head Length 181.9 mm Side 2: 184.2 mm Max Torque 4,524 N-m 5,655 N-m 6,786 N-m 7,465 N-m
Weight 201 kg Weight 208 kg Stall Pressure 3,937 kPa 4,922 kPa 5,906 kPa 6,497 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 7,238 N-m 9,049 N-m 10,858 N-m 11,945 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 101.07 0.75 100.76 1.05 101.09 0.72 100.56 1.26
0 S OS 101.90 -0.09 102.01 -0.19 101.70 0.11 101.78 0.04 101.85 -0.04 101.47 0.34
1
2
3
4 OS 2-OS 102.69 -0.88 102.46 -0.65 102.18 -0.37 102.69 -0.88 102.36 -0.55 102.01 -0.19
5
6
7
8
Reline Lengths (mm) Breen: Max 3330 Min 2972 Willis: Max 3327 Min 2870 Alternate Stator OD: 165.1 mm
8,000
2.000
7,000
6,000
Fit Increase (mm)
Torque (Nm)
1.500
5,000
4,000
1.000
3,000
2,000
0.500
1,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
100
120
1703 LPM
Speed (rpm)
100 80
1703 LPM
80 60
1136 LPM
60
40
1136 LPM
40
20
20
0 0
0 1,000 2,000 3,000 4,000 5,000 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 172
Power Section Specification (Metric Units) 675-7830 (B)
675-7830 (B)
6.75”7:8
6.75" 7:8Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5017 mm Overall Length 5182 mm Flow Range 1136-2271 LPM
Avg. Diameter 103.16 mm Tube OD 171.5 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 4829 mm Contour Length 4801 mm Speed Range 45-91 RPM
Eccentricity 6.45 mm Tube ID 139.70 mm No Load Pressure Loss 949 kPa
Major Diameter 116.05 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 190.5 mm Max Pressure 2,461 kPa 3,076 kPa 3,692 kPa 4,061 kPa
Head Length 188.0 mm Side 2: 190.5 mm Max Torque 8,391 N-m 10,489 N-m 12,587 N-m 13,846 N-m
Weight 343 kg Weight 339 kg Stall Pressure 3,937 kPa 4,922 kPa 5,906 kPa 6,497 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,424 N-m 16,783 N-m 20,138 N-m 22,153 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 102.84 0.32 102.49 0.67 102.74 0.42 102.41 0.75
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 5182 Min 4877 Alternate Stator OD: 165.1 mm
14,000
2.000
12,000
Fit Increase (mm)
10,000
Torque (Nm)
1.500
8,000
1.000
6,000
4,000
0.500
2,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
90
2271 LPM 120
2271 LPM
80
Mechanical Power (Kw)
70 100
1703 LPM
Speed (rpm)
60
80
1703 LPM
50
60
40 1136 LPM
30 40
1136 LPM
20
20
10
0 0
0 1,000 2,000 3,000 4,000 5,000 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 173
Power Section Specification (Metric Units) 675-7833
675-7833
6.75” 7:8
6.75" 7:8 Lobes
Lobes 3.3 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6058 mm Overall Length 6223 mm Flow Range 1136-2271 LPM
Avg. Diameter 101.35 mm Tube OD 171.5 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 5870 mm Contour Length 5817 mm Speed Range 42-85 RPM
Eccentricity 6.48 mm Tube ID 139.70 mm No Load Pressure Loss 967 kPa
Major Diameter 114.30 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 203.2 mm Max Pressure 2,792 kPa 3,490 kPa 4,188 kPa 4,607 kPa
Head Length 188.0 mm Side 2: 203.2 mm Max Torque 10,209 N-m 12,761 N-m 15,314 N-m 16,845 N-m
Weight 403 kg Weight 411 kg Stall Pressure 4,467 kPa 5,584 kPa 6,700 kPa 7,370 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 16,334 N-m 20,418 N-m 24,499 N-m 26,949 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 101.24 0.10 101.04 0.30 100.74 0.61 101.09 0.25 100.94 0.41 100.99 0.36
1
2
3
4 OS OS 102.18 -0.84 102.01 -0.66 101.65 -0.30 102.06 -0.71 101.98 -0.63 101.50 -0.15
5
6
7
8
Reline Lengths (mm) Breen: Max 6223 Min 5857 Willis: Max 6223 Min 5918 Alternate Stator OD: 165.1/177.8 mm
18,000
16,000 2.000
14,000
Fit Increase (mm)
Torque (Nm)
12,000 1.500
10,000
8,000 1.000
6,000
4,000 0.500
2,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 0 20 40 60 80 100 120 140
120
60
1703 LPM 100
Speed (rpm)
50
80 1703 LPM
40
1136 LPM
60
30
40 1136 LPM
20
10 20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 174
Power Section Specification (Metric Units) 675-7835
675-7835
6.75” 7:8
6.75" 7:8 Lobes
Lobes 3.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6401 mm Overall Length 6604 mm Flow Range 1136-2271 LPM
Avg. Diameter 105.28 mm Tube OD 171.5 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 6223 mm Contour Length 6223 mm Speed Range 42-85 RPM
Eccentricity 6.27 mm Tube ID 139.70 mm No Load Pressure Loss 979 kPa
Major Diameter 117.83 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 203.2 mm Max Pressure 3,096 kPa 3,870 kPa 4,644 kPa 5,108 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 11,062 N-m 13,828 N-m 16,593 N-m 18,253 N-m
Weight 408 kg Weight 440 kg Stall Pressure 4,953 kPa 6,192 kPa 7,430 kPa 8,173 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 17,698 N-m 22,125 N-m 26,548 N-m 29,203 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 105.38 -0.10 105.31 -0.03 105.33 -0.05 105.08 0.20
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 6604 Min 6299 Alternate Stator OD: 165.1 mm
1.800
20,000 1.600
1.400
Fit Increase (mm)
Torque (Nm)
15,000 1.200
1.000
10,000 0.800
0.600
5,000 0.400
0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 0 20 40 60 80 100 120 140
90 160
2271 LPM 2271 LPM
80 140
Mechanical Power (Kw)
70
120
Speed (rpm)
60 1703 LPM
100
50 1703 LPM
80
40
1136 LPM
60
30
1136 LPM
40
20
10 20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 175
Power Section Specification (Metric Units) 675-7850
675-7850
6.75”7:8
6.75" 7:8Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4775 mm Overall Length 4940 mm Flow Range 1136-2271 LPM
Avg. Diameter 101.82 mm Tube OD 171.5 mm Rev per Unit Volume 0.07 Rev/L
Contour Length 4597 mm Contour Length 4572 mm Speed Range 83-167 RPM
Eccentricity 6.50 mm Tube ID 139.70 mm No Load Pressure Loss 994 kPa
Major Diameter 114.81 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 184.2 mm Max Pressure 4,654 kPa 5,818 kPa 6,981 kPa 7,679 kPa
Head Length 177.8 mm Side 2: 184.2 mm Max Torque 8,622 N-m 10,777 N-m 12,933 N-m 14,226 N-m
Weight 319 kg Weight 326 kg Stall Pressure 7,446 kPa 9,308 kPa 11,169 kPa 12,286 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,794 N-m 17,244 N-m 20,692 N-m 22,761 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T US S 101.45 0.37 101.14 0.67 100.86 0.95 101.27 0.55 101.04 0.77 100.74 1.08
0 S OS 101.75 0.06 101.96 -0.14 101.65 0.17 101.63 0.19 101.63 0.19 101.45 0.37
1
2
3
4 OS 2-OS 102.54 -0.72 102.64 -0.83 102.31 -0.50 102.41 -0.60 102.24 -0.42 102.21 -0.39
5
6
7 2-OS 103.33 -1.51 103.12 -1.31
8
Reline Lengths (mm) Breen: Max 4930 Min 4623 Willis: Max 5182 Min 4636 Alternate Stator OD: 165.1/177.8 mm
14,000
2.000
12,000
Fit Increase (mm)
10,000
Torque (Nm)
1.500
8,000
1.000
6,000
4,000
0.500
2,000
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
120
1703 LPM
Speed (rpm)
150
100 1703 LPM
80
1136 LPM 100
60
1136 LPM
40 50
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 176
Power Section Specification (Metric Units) 675-7857
675-7857
6.75” 7:8
6.75" 7:8 Lobes
Lobes 5.7 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6396 mm Overall Length 6604 mm Flow Range 1136-2271 LPM
Avg. Diameter 105.43 mm Tube OD 171.5 mm Rev per Unit Volume 0.06 Rev/L
Contour Length 6218 mm Contour Length 6198 mm Speed Range 70-140 RPM
Eccentricity 6.25 mm Tube ID 139.70 mm No Load Pressure Loss 985 kPa
Major Diameter 117.93 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 114.30 mm Side 1: 203.2 mm Max Pressure 5,585 kPa 6,981 kPa 8,378 kPa 9,215 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 12,387 N-m 15,484 N-m 18,581 N-m 20,440 N-m
Weight 417 kg Weight 437 kg Stall Pressure 8,936 kPa 11,170 kPa 13,404 kPa 14,744 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 19,820 N-m 24,775 N-m 29,730 N-m 32,703 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 105.23 0.19 105.31 0.12 105.05 0.37 105.05 0.37 105.08 0.35 105.18 0.24
1
2
3
4 OS 105.61 -0.19 105.56 -0.14
5
6
7
8
Reline Lengths (mm) Breen: Max 6607 Min 6299 Willis: Max 6604 Min 6299 Alternate Stator OD: 177.8 mm
1.800
20,000 1.600
1.400
Fit Increase (mm)
Torque (Nm)
15,000 1.200
1.000
10,000 0.800
0.600
5,000 0.400
0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 0 20 40 60 80 100 120 140
120
200
100
Speed (rpm)
1703 LPM
1703 LPM
80 150
60 1136 LPM
100
1136 LPM
40
50
20
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 177
Power Section Specification (Metric Units) 675-7864 (A)
675-7864 (A)
6.75” 7:8
6.75" 7:8 Lobes
Lobes 6.4 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6058 mm Overall Length 6223 mm Flow Range 1136-2271 LPM
Avg. Diameter 101.82 mm Tube OD 171.5 mm Rev per Unit Volume 0.07 Rev/L
Contour Length 5880 mm Contour Length 5855 mm Speed Range 83-166 RPM
Eccentricity 6.50 mm Tube ID 139.70 mm No Load Pressure Loss 989 kPa
Major Diameter 114.81 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 184.2 mm Max Pressure 6,247 kPa 7,809 kPa 9,371 kPa 10,308 kPa
Head Length 177.8 mm Side 2: 184.2 mm Max Torque 11,632 N-m 14,541 N-m 17,449 N-m 19,194 N-m
Weight 405 kg Weight 412 kg Stall Pressure 9,995 kPa 12,494 kPa 14,992 kPa 16,492 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 18,612 N-m 23,265 N-m 27,917 N-m 30,710 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 101.52 0.29 101.12 0.70 101.55 0.27 100.99 0.83
1
2
3
4 OS 102.31 -0.50 101.96 -0.14 101.90 -0.09 101.80 0.01
5
6
7 2-OS 102.84 -1.03 102.49 -0.67 102.82 -1.00 102.46 -0.65
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 6223 Min 5918 Alternate Stator OD: 165.1/177.8 mm
20,000 2.000
Fit Increase (mm)
Torque (Nm)
15,000 1.500
10,000 1.000
5,000 0.500
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 0 20 40 60 80 100 120 140
160
2271 LPM 300 2271 LPM
140
Mechanical Power (Kw)
250
120
1703 LPM
Speed (rpm)
100 200
1703 LPM
80 150
1136 LPM
60
100 1136 LPM
40
50
20
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 178
Power Section Specification (Metric Units) 675-7864 (B)
675-7864 (B)
6.75” 7:8
6.75" 7:8 Lobes
Lobes 6.4 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5906 mm Overall Length 6350 mm Flow Range 1136-2271 LPM
Avg. Diameter 100.07 mm Tube OD 171.5 mm Rev per Unit Volume 0.07 Rev/L
Contour Length 5728 mm Contour Length 5944 mm Speed Range 75-151 RPM
Eccentricity 6.16 mm Tube ID 139.70 mm No Load Pressure Loss 1083 kPa
Major Diameter 112.40 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 203.2 mm Max Pressure 6,605 kPa 8,256 kPa 9,908 kPa 10,898 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 13,523 N-m 16,904 N-m 20,285 N-m 22,314 N-m
Weight 355 kg Weight 423 kg Stall Pressure 10,568 kPa 13,210 kPa 15,852 kPa 17,437 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 21,638 N-m 27,047 N-m 32,457 N-m 35,702 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 100.30 -0.24 100.13 -0.06
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 6353 Min 6045 Willis: Max - Min - Alternate Stator OD: 177.8 mm
1.600
25,000
1.400
20,000
Fit Increase (mm)
1.200
Torque (Nm)
1.000
15,000
0.800
10,000 0.600
0.400
5,000
0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 20 40 60 80 100 120 140
120
250
1703 LPM
100
Speed (rpm)
50
20
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 179
Power Section Specification (Metric Units) 675-91035
675-91035
6.75” 9:10
6.75" 9:10 Lobes
Lobes3.5
3.5Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5201 mm Overall Length 5334 mm Flow Range 946-2082 LPM
Avg. Diameter 101.18 mm Tube OD 171.5 mm Rev per Unit Volume 0.05 Rev/L
Contour Length 4997 mm Contour Length 4928 mm Speed Range 45-99 RPM
Eccentricity 5.04 mm Tube ID 139.70 mm No Load Pressure Loss 1149 kPa
Major Diameter 111.25 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 107.95 mm Side 1: 203.2 mm Max Pressure 3,089 kPa 3,861 kPa 4,634 kPa 5,097 kPa
Head Length 203.2 mm Side 2: 203.2 mm Max Torque 8,415 N-m 10,519 N-m 12,622 N-m 13,885 N-m
Weight 307 kg Weight 361 kg Stall Pressure 4,942 kPa 6,178 kPa 7,413 kPa 8,154 kPa
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 13,463 N-m 16,830 N-m 20,195 N-m 22,213 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 101.14 0.04 100.86 0.32 101.27 -0.09 100.74 0.44
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 5334 Min 5029 Alternate Stator OD: - mm
14,000
2.000
12,000
Fit Increase (mm)
10,000
Torque (Nm)
1.500
8,000
1.000
6,000
4,000
0.500
2,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 0 20 40 60 80 100 120 140
140
100
2082 LPM
2082 LPM
Mechanical Power (Kw)
120
80
100
Speed (rpm)
1514 LPM
60 80
1514 LPM
60
40
946 LPM
40
946 LPM
20
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 180
Power Section Specification (Metric Units) 675-91040
675-91040
6.75”9:10
6.75" 9:10Lobes
Lobes 44 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3658 mm Overall Length 3780 mm Flow Range 1136-2271 LPM
Avg. Diameter 102.49 mm Tube OD 171.5 mm Rev per Unit Volume 0.05 Rev/L
Contour Length 3531 mm Contour Length 3373 mm Speed Range 60-120 RPM
Eccentricity 5.12 mm Tube ID 139.70 mm No Load Pressure Loss 1028 kPa
Major Diameter 112.73 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 105.92 mm Side 1: 203.2 mm Max Pressure 3,813 kPa 4,766 kPa 5,720 kPa 6,291 kPa
Head Length 127.0 mm Side 2: 203.2 mm Max Torque 9,356 N-m 11,695 N-m 14,034 N-m 15,438 N-m
Weight 237 kg Weight 235 kg Stall Pressure 6,100 kPa 7,626 kPa 9,151 kPa 10,066 kPa
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 14,968 N-m 18,713 N-m 22,455 N-m 24,700 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1
2 S 103.07 -0.58 103.12 -0.63
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 3782 Min 3607 Willis: Max - Min - Alternate Stator OD: - mm
16,000 1.600
14,000 1.400
12,000
Fit Increase (mm)
1.200
Torque (Nm)
10,000 1.000
8,000 0.800
6,000 0.600
4,000 0.400
2,000 0.200
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
180
120 2271 LPM
2271 LPM 160
Mechanical Power (Kw)
100 140
Speed (rpm)
120
80 1703 LPM
1703 LPM
100
60
80
1136 LPM
40 60
1136 LPM
40
20
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 181
Power Section Specification (Metric Units) 700-7860
700-7860
7” 7:8 Lobes
7" Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4851 mm Overall Length 5080 mm Flow Range 1136-2271 LPM
Avg. Diameter 103.88 mm Tube OD 177.8 mm Rev per Unit Volume 0.11 Rev/L
Contour Length 4674 mm Contour Length 4674 mm Speed Range 126-252 RPM
Eccentricity 6.56 mm Tube ID 146.05 mm No Load Pressure Loss 1507 kPa
Major Diameter 117.01 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 111.25 mm Side 1: 203.2 mm Max Pressure 5,378 kPa 6,723 kPa 8,067 kPa 8,874 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 6,633 N-m 8,292 N-m 9,950 N-m 10,945 N-m
Weight 320 kg Weight 358 kg Stall Pressure 8,604 kPa 10,756 kPa 12,907 kPa 14,197 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 10,613 N-m 13,267 N-m 15,921 N-m 17,512 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 104.22 -0.34 104.27 -0.39
1
2
3
4 OS 104.65 -0.77 104.67 -0.79
5 1.5-OS 105.49 -1.61 105.49 -1.61
6
7
8
Reline Lengths (mm) Breen: Max 5080 Min 4724 Willis: Max - Min - Alternate Stator OD: - mm
1.800
12,000
1.600
10,000 1.400
Fit Increase (mm)
Torque (Nm)
1.200
8,000
1.000
6,000
0.800
4,000 0.600
0.400
2,000
0.200
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
200 200
Speed (rpm)
1703 LPM
1703 LPM
150 150
50 50
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 182
Power Section Specification (Metric Units) 700-7875
700-7875
7”
7"7:8
7:8Lobes
Lobes7.5
7.5Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6121 mm Overall Length 6248 mm Flow Range 1136-2271 LPM
Avg. Diameter 103.88 mm Tube OD 177.8 mm Rev per Unit Volume 0.08 Rev/L
Contour Length 5944 mm Contour Length 5779 mm Speed Range 92-184 RPM
Eccentricity 6.56 mm Tube ID 146.05 mm No Load Pressure Loss 970 kPa
Major Diameter 117.01 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 111.25 mm Side 1: 235.0 mm Max Pressure 7,536 kPa 9,420 kPa 11,304 kPa 12,434 kPa
Head Length 177.8 mm Side 2: 235.0 mm Max Torque 12,674 N-m 15,842 N-m 19,011 N-m 20,912 N-m
Weight 407 kg Weight 438 kg Stall Pressure 12,057 kPa 15,072 kPa 18,086 kPa 19,895 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 20,277 N-m 25,348 N-m 30,417 N-m 33,459 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S OS 104.04 -0.16 104.27 -0.39 104.04 -0.16 103.86 0.02 104.34 -0.46 103.89 -0.01
1
2
3
4 OS 104.65 -0.77 104.39 -0.51
5
6
7
8
Reline Lengths (mm) Breen: Max 6350 Min 5994 Willis: Max 6248 Min 5944 Alternate Stator OD: - mm
20,000 2.000
Fit Increase (mm)
Torque (Nm)
15,000 1.500
10,000 1.000
5,000 0.500
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 0 20 40 60 80 100 120 140
180 400
2271 LPM
160 350 2271 LPM
Mechanical Power (Kw)
140
300
1703 LPM
Speed (rpm)
120
250
100 1703 LPM
200
80 1136 LPM
150
60
1136 LPM
100
40
20 50
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 183
Power Section Specification (Metric Units) 725-5650
725-5650
7.25”5:6
7.25" 5:6Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4343 mm Overall Length 4521 mm Flow Range 1136-2271 LPM
Avg. Diameter 103.38 mm Tube OD 184.2 mm Rev per Unit Volume 0.08 Rev/L
Contour Length 4166 mm Contour Length 4140 mm Speed Range 95-191 RPM
Eccentricity 8.57 mm Tube ID 152.40 mm No Load Pressure Loss 837 kPa
Major Diameter 120.52 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 101.60 mm Side 1: 190.5 mm Max Pressure 4,378 kPa 5,473 kPa 6,567 kPa 7,224 kPa
Head Length 177.8 mm Side 2: 190.5 mm Max Torque 7,431 N-m 9,289 N-m 11,147 N-m 12,262 N-m
Weight 285 kg Weight 332 kg Stall Pressure 7,004 kPa 8,756 kPa 10,507 kPa 11,557 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 11,889 N-m 14,863 N-m 17,835 N-m 19,618 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 102.87 0.51 102.21 1.17 102.49 0.89 102.01 1.37
1
2
3
4 OS 103.68 -0.30 103.56 -0.18 103.81 -0.43 103.35 0.03
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 4521 Min 4216 Alternate Stator OD: - mm
12,000
2.500
10,000
Fit Increase (mm)
2.000
Torque (Nm)
8,000
1.500
6,000
1.000
4,000
0.500
2,000
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
2271 LPM
200 200
Mechanical Power (Kw)
2271 LPM
Speed (rpm)
150 150
1703 LPM
1703 LPM
100 100
1136 LPM
1136 LPM
50 50
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 184
Power Section Specification (Metric Units) 725-7877
725-7877
7.25” 7:8
7.25" 7:8 Lobes
Lobes 7.7 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6061 mm Overall Length 6223 mm Flow Range 1136-2271 LPM
Avg. Diameter 109.84 mm Tube OD 184.2 mm Rev per Unit Volume 0.08 Rev/L
Contour Length 5867 mm Contour Length 5817 mm Speed Range 91-182 RPM
Eccentricity 6.83 mm Tube ID 149.23 mm No Load Pressure Loss 950 kPa
Major Diameter 123.49 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 114.30 mm Side 1: 190.5 mm Max Pressure 7,750 kPa 9,688 kPa 11,625 kPa 12,788 kPa
Head Length 194.1 mm Side 2: 190.5 mm Max Torque 13,231 N-m 16,539 N-m 19,847 N-m 21,832 N-m
Weight 444 kg Weight 485 kg Stall Pressure 12,400 kPa 15,500 kPa 18,600 kPa 20,460 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 21,171 N-m 26,463 N-m 31,756 N-m 34,932 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 109.04 0.80 108.74 1.10 109.07 0.77 108.59 1.26
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 6223 Min 5918 Alternate Stator OD: - mm
20,000 2.000
Fit Increase (mm)
Torque (Nm)
15,000 1.500
10,000 1.000
5,000 0.500
0 0.000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 0 20 40 60 80 100 120 140
180 400
2271 LPM
160 2271 LPM
350
Mechanical Power (Kw)
140
300
1703 LPM
Speed (rpm)
120
250
100 1703 LPM
200
80 1136 LPM
150
60
1136 LPM
100
40
20 50
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 185
Power Section Specification (Metric Units) 775-6740 (A)
775-6740 (A)
7.75”6:7
7.75" 6:7Lobes
Lobes44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3302 mm Overall Length 3505 mm Flow Range 1136-3407 LPM
Avg. Diameter 113.16 mm Tube OD 196.9 mm Rev per Unit Volume 0.07 Rev/L
Contour Length 3122 mm Contour Length 3099 mm Speed Range 84-252 RPM
Eccentricity 8.29 mm Tube ID 158.75 mm No Load Pressure Loss 1077 kPa
Major Diameter 129.74 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 114.30 mm Side 1: 203.2 mm Max Pressure 3,268 kPa 4,085 kPa 4,902 kPa 5,392 kPa
Head Length 180.3 mm Side 2: 203.2 mm Max Torque 6,178 N-m 7,722 N-m 9,267 N-m 10,193 N-m
Weight 276 kg Weight 315 kg Stall Pressure 5,228 kPa 6,536 kPa 7,843 kPa 8,627 kPa
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 9,883 N-m 12,356 N-m 14,827 N-m 16,309 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 112.34 0.81 111.76 1.40 112.37 0.79 111.61 1.55
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 3505 Min 3200 Alternate Stator OD: 203.2 mm
10,000 2.500
8,000
Fit Increase (mm)
2.000
Torque (Nm)
6,000 1.500
4,000 1.000
2,000 0.500
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 20 40 60 80 100 120 140
250 250
3407 LPM 3407 LPM
Mechanical Power (Kw)
200 200
Speed (rpm)
2271 LPM
100 100
1136 LPM
50 50
1136 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 186
Power Section Specification (Metric Units) 775-91030
775-91030
7.75”9:10
7.75" 9:10Lobes
Lobes 33 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2692 mm Overall Length 2845 mm Flow Range 1136-2271 LPM
Avg. Diameter 116.59 mm Tube OD 196.9 mm Rev per Unit Volume 0.06 Rev/L
Contour Length 2522 mm Contour Length 2438 mm Speed Range 69-138 RPM
Eccentricity 5.94 mm Tube ID 158.75 mm No Load Pressure Loss 1051 kPa
Major Diameter 128.47 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 120.65 mm Side 1: 203.2 mm Max Pressure 2,496 kPa 3,120 kPa 3,744 kPa 4,118 kPa
Head Length 170.2 mm Side 2: 203.2 mm Max Torque 5,349 N-m 6,686 N-m 8,023 N-m 8,826 N-m
Weight 236 kg Weight 257 kg Stall Pressure 3,993 kPa 4,992 kPa 5,990 kPa 6,589 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 8,557 N-m 10,698 N-m 12,837 N-m 14,121 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 116.08 0.51 115.65 0.94 115.87 0.71 115.54 1.04
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 2845 Min 2540 Alternate Stator OD: 203.2 mm
9,000
8,000 2.000
7,000
Fit Increase (mm)
Torque (Nm)
6,000 1.500
5,000
4,000 1.000
3,000
2,000 0.500
1,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
140 120
2271 LPM 2271 LPM
Mechanical Power (Kw)
120
100
100
Speed (rpm)
1703 LPM 80
80 1703 LPM
60
60 1136 LPM
40
40 1136 LPM
20
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 187
Power Section Specification (Metric Units) 800-4533
800-4533
8”
8"4:5
4:5Lobes
Lobes3.3
3.3Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3708 mm Overall Length 3810 mm Flow Range 1136-3407 LPM
Avg. Diameter 102.62 mm Tube OD 203.2 mm Rev per Unit Volume 0.07 Rev/L
Contour Length 3355 mm Contour Length 3378 mm Speed Range 77-231 RPM
Eccentricity 10.36 mm Tube ID 155.96 mm No Load Pressure Loss 926 kPa
Major Diameter 123.34 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 115.57 mm Side 1: 215.9 mm Max Pressure 2,386 kPa 2,983 kPa 3,579 kPa 3,937 kPa
Head Length 353.8 mm Side 2: 215.9 mm Max Torque 5,135 N-m 6,419 N-m 7,703 N-m 8,473 N-m
Weight 253 kg Weight 426 kg Stall Pressure 3,817 kPa 4,772 kPa 5,726 kPa 6,299 kPa
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 8,215 N-m 10,270 N-m 12,324 N-m 13,557 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 102.08 0.53 101.63 0.99 102.03 0.58 101.40 1.22
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 5791 Min 5486 Alternate Stator OD: - mm
9,000
2.500
8,000
7,000
Fit Increase (mm)
2.000
Torque (Nm)
6,000
5,000 1.500
4,000
1.000
3,000
2,000
0.500
1,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
3407 LPM
200 200
Mechanical Power (Kw)
3407 LPM
Speed (rpm)
150 150
2271 LPM
100 100
2271 LPM
1136 LPM
50 50
1136 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 188
Power Section Specification (Metric Units) 800-4536
800-4536
8”
8"4:5
4:5Lobes
Lobes3.6
3.6Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3901 mm Overall Length 4064 mm Flow Range 1136-3407 LPM
Avg. Diameter 104.38 mm Tube OD 203.2 mm Rev per Unit Volume 0.07 Rev/L
Contour Length 3724 mm Contour Length 3658 mm Speed Range 75-226 RPM
Eccentricity 10.55 mm Tube ID 158.75 mm No Load Pressure Loss 915 kPa
Major Diameter 125.49 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 120.65 mm Side 1: 203.2 mm Max Pressure 2,668 kPa 3,335 kPa 4,002 kPa 4,402 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 5,883 N-m 7,353 N-m 8,824 N-m 9,707 N-m
Weight 274 kg Weight 434 kg Stall Pressure 4,268 kPa 5,336 kPa 6,403 kPa 7,043 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 9,411 N-m 11,766 N-m 14,119 N-m 15,530 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 103.81 0.57 103.12 1.26 103.61 0.77 102.90 1.48
0 S OS 104.34 0.04 104.83 -0.45 104.39 -0.01 104.24 0.14 104.70 -0.32 104.04 0.34
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 4267 Min 3912 Willis: Max 4267 Min 3759 Alternate Stator OD: 196.9/209.6 mm
10,000 2.500
8,000
Fit Increase (mm)
2.000
Torque (Nm)
6,000 1.500
4,000 1.000
2,000 0.500
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
3407 LPM
200 200 3407 LPM
Mechanical Power (Kw)
Speed (rpm)
150 150
2271 LPM
2271 LPM
100 100
1136 LPM
50 50
1136 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 189
Power Section Specification (Metric Units) 800-4553
800-4553
8”
8"4:5
4:5Lobes
Lobes5.3
5.3Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5613 mm Overall Length 5791 mm Flow Range 1136-3407 LPM
Avg. Diameter 104.38 mm Tube OD 203.2 mm Rev per Unit Volume 0.07 Rev/L
Contour Length 5436 mm Contour Length 5385 mm Speed Range 75-226 RPM
Eccentricity 10.55 mm Tube ID 158.75 mm No Load Pressure Loss 916 kPa
Major Diameter 125.49 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 120.65 mm Side 1: 203.2 mm Max Pressure 4,364 kPa 5,455 kPa 6,546 kPa 7,201 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 9,618 N-m 12,023 N-m 14,427 N-m 15,870 N-m
Weight 392 kg Weight 620 kg Stall Pressure 6,982 kPa 8,728 kPa 10,473 kPa 11,520 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 15,388 N-m 19,237 N-m 23,083 N-m 25,391 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 103.66 0.72 103.25 1.13 103.38 1.00 103.05 1.33
0 S 103.91 0.47 103.81 0.57
1
2
3
4 OS 104.90 -0.52 104.47 -0.09 104.85 -0.47 104.37 0.01
5
6
7 2-OS 106.15 -1.77 106.15 -1.77
8
Reline Lengths (mm) Breen: Max 5791 Min 5486 Willis: Max 5791 Min 5486 Alternate Stator OD: 196.9/209.6 mm
16,000
2.500
14,000
12,000
Fit Increase (mm)
2.000
Torque (Nm)
10,000
1.500
8,000
6,000 1.000
4,000
0.500
2,000
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
350
3407 LPM 3407 LPM
200
Mechanical Power (Kw)
300
250
Speed (rpm)
150
2271 LPM
200
2271 LPM
100
150
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 190
Power Section Specification (Metric Units) 800-5630
800-5630
8” 5:6
8" 5.6 Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2667 mm Overall Length 2835 mm Flow Range 1893-3407 LPM
Avg. Diameter 104.18 mm Tube OD 203.2 mm Rev per Unit Volume 0.05 Rev/L
Contour Length 2489 mm Contour Length 2454 mm Speed Range 96-174 RPM
Eccentricity 9.69 mm Tube ID 158.75 mm No Load Pressure Loss 1351 kPa
Major Diameter 123.57 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 120.65 mm Side 1: 203.2 mm Max Pressure 1,979 kPa 2,474 kPa 2,969 kPa 3,265 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 5,535 N-m 6,919 N-m 8,303 N-m 9,133 N-m
Weight 176 kg Weight 288 kg Stall Pressure 3,166 kPa 3,958 kPa 4,749 kPa 5,224 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 8,855 N-m 11,071 N-m 13,283 N-m 14,612 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 104.19 -0.01 104.04 0.14
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 2835 Min 2530 Willis: Max - Min - Alternate Stator OD: - mm
10,000
2.000
8,000
Fit Increase (mm)
Torque (Nm)
1.500
6,000
1.000
4,000
0.500
2,000
0 0.000
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 0 20 40 60 80 100 120 140
120
140
120
100 80
80 1893 LPM
60 1893 LPM
60
40
40
20
20
0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 191
Power Section Specification (Metric Units) 800-5650
800-5650
8” 5:6 Lobes
8" Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4115 mm Overall Length 4267 mm Flow Range 1893-3407 LPM
Avg. Diameter 104.18 mm Tube OD 203.2 mm Rev per Unit Volume 0.05 Rev/L
Contour Length 3937 mm Contour Length 3861 mm Speed Range 96-174 RPM
Eccentricity 9.69 mm Tube ID 158.75 mm No Load Pressure Loss 1351 kPa
Major Diameter 123.57 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 120.65 mm Side 1: 203.2 mm Max Pressure 3,882 kPa 4,853 kPa 5,823 kPa 6,405 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 10,858 N-m 13,573 N-m 16,287 N-m 17,916 N-m
Weight 268 kg Weight 433 kg Stall Pressure 6,211 kPa 7,764 kPa 9,316 kPa 10,248 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 17,373 N-m 21,717 N-m 26,058 N-m 28,665 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 104.19 -0.01 104.04 0.14
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 4267 Min 3962 Willis: Max - Min - Alternate Stator OD: 196.9 mm
20,000 2.000
Fit Increase (mm)
Torque (Nm)
15,000 1.500
10,000 1.000
5,000 0.500
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
180
300
3407 LPM 3407 LPM
160
Mechanical Power (Kw)
140 250
2650 LPM
Speed (rpm)
120
200
2650 LPM
100
40
50
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 192
Power Section Specification (Metric Units) 800-6740 (B)
800-6740 (B)
8” 6:7 Lobes
8" Lobes44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5055 mm Overall Length 5232 mm Flow Range 1136-3407 LPM
Avg. Diameter 108.85 mm Tube OD 203.2 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 4877 mm Contour Length 4826 mm Speed Range 45-137 RPM
Eccentricity 8.54 mm Tube ID 158.75 mm No Load Pressure Loss 962 kPa
Major Diameter 125.93 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 120.65 mm Side 1: 203.2 mm Max Pressure 3,406 kPa 4,258 kPa 5,109 kPa 5,620 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 11,853 N-m 14,817 N-m 17,780 N-m 19,558 N-m
Weight 449 kg Weight 547 kg Stall Pressure 5,449 kPa 6,812 kPa 8,174 kPa 8,991 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 18,963 N-m 23,707 N-m 28,447 N-m 31,290 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 POB-PRR UF114
280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Breen Fit Fit
Willis Willis
Fit Fit
Willis Fit
T US 108.41 0.44 108.41 0.44
0 S OS 108.97 -0.11 108.81 0.04 108.43 0.42 108.92 -0.06 108.66 0.19 108.33 0.52
1
2
3
4 OS 109.65 -0.80 109.68 -0.83
5
6
7
8
Reline Lengths (mm) Breen: Max 5235 Min 4874 Willis: Max 5232 Min 4928 Alternate Stator OD: 196.9 mm
2.500
20,000
Fit Increase (mm)
2.000
Torque (Nm)
15,000
1.500
10,000
1.000
5,000
0.500
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 20 40 60 80 100 120 140
140
250 3407 LPM
3407 LPM
Mechanical Power (Kw)
120
200
100
Speed (rpm)
40
1136 LPM
50
20
1136 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 193
Power Section Specification (Metric Units) 800-6750
800-6750
8” 6:7 Lobes
8" Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6198 mm Overall Length 6350 mm Flow Range 1136-3407 LPM
Avg. Diameter 108.85 mm Tube OD 203.2 mm Rev per Unit Volume 0.03 Rev/L
Contour Length 6020 mm Contour Length 5944 mm Speed Range 31-95 RPM
Eccentricity 8.54 mm Tube ID 158.75 mm No Load Pressure Loss 1645 kPa
Major Diameter 125.94 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 120.65 mm Side 1: 203.2 mm Max Pressure 3,744 kPa 4,680 kPa 5,616 kPa 6,178 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 18,657 N-m 23,321 N-m 27,985 N-m 30,784 N-m
Weight 441 kg Weight 643 kg Stall Pressure 5,990 kPa 7,488 kPa 8,985 kPa 9,884 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 29,849 N-m 37,314 N-m 44,774 N-m 49,254 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 108.94 -0.09 108.86 -0.01
1
2
3
4
5
6
7 2-OS 110.72 -1.87 110.72 -1.87
8
Reline Lengths (mm) Breen: Max 6353 Min 6002 Willis: Max - Min - Alternate Stator OD: - mm
4.500
30,000
4.000
25,000 3.500
Fit Increase (mm)
Torque (Nm)
3.000
20,000
2.500
15,000
2.000
10,000 1.500
1.000
5,000
0.500
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 20 40 60 80 100 120 140
3407 LPM
100 250
Mechanical Power (Kw)
3407 LPM
80 200
Speed (rpm)
60 150
2271 LPM 2271 LPM
40 100
1136 LPM
20 50
1136 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 194
Power Section Specification (Metric Units) 800-7820
800-7820
8” 7:8 Lobes
8" Lobes22Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3901 mm Overall Length 4267 mm Flow Range 1136-3407 LPM
Avg. Diameter 110.36 mm Tube OD 203.2 mm Rev per Unit Volume 0.01 Rev/L
Contour Length 3724 mm Contour Length 3861 mm Speed Range 16-50 RPM
Eccentricity 7.27 mm Tube ID 158.75 mm No Load Pressure Loss 993 kPa
Major Diameter 124.91 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 120.65 mm Side 1: 203.2 mm Max Pressure 1,407 kPa 1,759 kPa 2,111 kPa 2,322 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 12,907 N-m 16,133 N-m 19,360 N-m 21,296 N-m
Weight 293 kg Weight 375 kg Stall Pressure 2,251 kPa 2,814 kPa 3,376 kPa 3,714 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 20,649 N-m 25,814 N-m 30,969 N-m 34,070 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 110.62 -0.26 110.44 -0.08
1
2
3
4 OS 111.15 -0.79 111.15 -0.79
5
6
7
8
Reline Lengths (mm) Breen: Max 4267 Min 3912 Willis: Max Min Alternate Stator OD: 196.9 mm
20,000 2.000
Fit Increase (mm)
Torque (Nm)
15,000 1.500
10,000 1.000
5,000 0.500
0 0.000
0 500 1,000 1,500 2,000 2,500 3,000 0 20 40 60 80 100 120 140
40 80
Speed (rpm)
30 2271 LPM 60
2271 LPM
20 40
1136 LPM
10 20
1136 LPM
0 0
0 500 1,000 1,500 2,000 2,500 3,000 0 500 1,000 1,500 2,000 2,500 3,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 195
Power Section Specification (Metric Units) 800-7830
800-7830
8” 7:8 Lobes
8" Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3901 mm Overall Length 4064 mm Flow Range 1136-3407 LPM
Avg. Diameter 117.08 mm Tube OD 203.2 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 3724 mm Contour Length 3658 mm Speed Range 48-146 RPM
Eccentricity 7.33 mm Tube ID 158.75 mm No Load Pressure Loss 1132 kPa
Major Diameter 131.73 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 120.65 mm Side 1: 203.2 mm Max Pressure 2,255 kPa 2,819 kPa 3,383 kPa 3,721 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 7,167 N-m 8,959 N-m 10,751 N-m 11,827 N-m
Weight 336 kg Weight 428 kg Stall Pressure 3,608 kPa 4,510 kPa 5,412 kPa 5,953 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 11,468 N-m 14,335 N-m 17,203 N-m 18,922 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 116.18 0.90 115.87 1.20 115.95 1.12 115.62 1.45
0 S OS 116.64 0.44 117.07 0.01 116.74 0.34 116.51 0.57 116.97 0.11 116.56 0.51
1
2
3
4 OS 118.01 -0.93 117.78 -0.70
5
6
7
8
Reline Lengths (mm) Breen: Max 4267 Min 3912 Willis: Max 4267 Min 3759 Alternate Stator OD: 196.9/209.6 mm
12,000
2.000
10,000
Fit Increase (mm)
Torque (Nm)
1.500
8,000
6,000
1.000
4,000
0.500
2,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
180
140
3407 LPM
160 3407 LPM
Mechanical Power (Kw)
120
140
100
Speed (rpm)
120
2271 LPM
80 100
80 2271 LPM
60
60
40 1136 LPM
40
20
20 1136 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 196
Power Section Specification (Metric Units) 800-7840
800-7840
8” 7:8 Lobes
8" Lobes44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4991 mm Overall Length 5161 mm Flow Range 1136-3407 LPM
Avg. Diameter 117.08 mm Tube OD 203.2 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 4813 mm Contour Length 4755 mm Speed Range 48-146 RPM
Eccentricity 7.33 mm Tube ID 158.75 mm No Load Pressure Loss 1130 kPa
Major Diameter 131.73 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 120.65 mm Side 1: 203.2 mm Max Pressure 3,275 kPa 4,094 kPa 4,913 kPa 5,404 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 10,430 N-m 13,037 N-m 15,645 N-m 17,210 N-m
Weight 430 kg Weight 544 kg Stall Pressure 5,240 kPa 6,550 kPa 7,860 kPa 8,646 kPa
Thread Form 3 1/2" API IF / Reg Material Alloy Steel Stall Torque 16,688 N-m 20,860 N-m 25,032 N-m 27,536 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 116.18 0.90 115.87 1.20 116.03 1.05 115.67 1.40
0 S 116.48 0.59 116.36 0.72
1
2 0.5-OS OS 117.50 -0.43 117.07 0.01 116.76 0.31 117.09 -0.02 116.89 0.18 116.71 0.36
3
4 OS 117.81 -0.73 117.68 -0.60
5
6
7
8
Reline Lengths (mm) Breen: Max 5232 Min 4928 Willis: Max 5309 Min 4856 Alternate Stator OD: 196.9 mm
18,000
16,000 2.000
14,000
Fit Increase (mm)
Torque (Nm)
12,000 1.500
10,000
8,000 1.000
6,000
4,000 0.500
2,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 20 40 60 80 100 120 140
140
3407 LPM 250
3407 LPM
Mechanical Power (Kw)
120
200
100
Speed (rpm)
2271 LPM
80 150
2271 LPM
60
100
40 1136 LPM
50
20
1136 LPM
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 197
Power Section Specification (Metric Units) 800-91027
800-91027
8”8"9:10
9:10Lobes 2.72.7
Lobes Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6655 mm Overall Length 6858 mm Flow Range 1136-3407 LPM
Avg. Diameter 121.55 mm Tube OD 203.2 mm Rev per Unit Volume 0.01 Rev/L
Contour Length 6464 mm Contour Length 6452 mm Speed Range 13-40 RPM
Eccentricity 6.09 mm Tube ID 158.75 mm No Load Pressure Loss 2314 kPa
Major Diameter 133.73 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 123.19 mm Side 1: 203.2 mm Max Pressure 993 kPa 1,241 kPa 1,490 kPa 1,638 kPa
Head Length 190.5 mm Side 2: 203.2 mm Max Torque 11,012 N-m 13,766 N-m 16,519 N-m 18,171 N-m
Weight 612 kg Weight 714 kg Stall Pressure 1,588 kPa 1,986 kPa 2,383 kPa 2,621 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 17,611 N-m 22,025 N-m 26,428 N-m 29,068 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T US 120.80 0.75 120.80 0.75
0 S 121.31 0.24 121.29 0.27
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 6858 Min 6604 Willis: Max - Min - Alternate Stator OD: - mm
1.600
20,000
1.400
Fit Increase (mm)
1.200
Torque (Nm)
15,000
1.000
0.800
10,000
0.600
0.400
5,000
0.200
0 0.000
0 500 1,000 1,500 2,000 0 20 40 60 80 100 120 140
40 70
3407 LPM 3407 LPM
35
Mechanical Power (Kw)
60
30
50
Speed (rpm)
25
2271 LPM
40
20 2271 LPM
30
15
20
10 1136 LPM
5 10
1136 LPM
0 0
0 500 1,000 1,500 2,000 0 500 1,000 1,500 2,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 198
Power Section Specification (Metric Units) 962-2375
962-2375
9.62” 2:3
9.62" 2:3 Lobes
Lobes 7.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5131 mm Overall Length 5283 mm Flow Range 2271-4542 LPM
Avg. Diameter 134.51 mm Tube OD 244.3 mm Rev per Unit Volume 0.13 Rev/L
Contour Length 4902 mm Contour Length 4826 mm Speed Range 287-574 RPM
Eccentricity 12.35 mm Tube ID 200.15 mm No Load Pressure Loss 1416 kPa
Major Diameter 159.21 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 139.70 mm Side 1: 228.6 mm Max Pressure 5,330 kPa 6,663 kPa 7,995 kPa 8,795 kPa
Head Length 228.6 mm Side 2: 228.6 mm Max Torque 6,438 N-m 8,048 N-m 9,657 N-m 10,623 N-m
Weight 599 kg Weight 686 kg Stall Pressure 8,528 kPa 10,660 kPa 12,792 kPa 14,071 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 10,301 N-m 12,877 N-m 15,452 N-m 16,997 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0
1
2 S 134.49 0.01 134.77 -0.27
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 5283 Min 4928 Willis: Max - Min - Alternate Stator OD: - mm
10,000 2.500
8,000
Fit Increase (mm)
2.000
Torque (Nm)
6,000 1.500
4,000 1.000
2,000 0.500
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
4542 LPM
500
400
Speed (rpm)
3407 LPM
400
3407 LPM
300
300
100
100
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 199
Power Section Specification (Metric Units) 962-3445
962-3445
9.62” 3:4
9.62" 3:4 Lobes
Lobes 4.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4242 mm Overall Length 4521 mm Flow Range 2271-4542 LPM
Avg. Diameter 121.40 mm Tube OD 244.3 mm Rev per Unit Volume 0.06 Rev/L
Contour Length 4064 mm Contour Length 4013 mm Speed Range 135-270 RPM
Eccentricity 15.23 mm Tube ID 200.03 mm No Load Pressure Loss 997 kPa
Major Diameter 151.85 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 139.70 mm Side 1: 254.0 mm Max Pressure 3,296 kPa 4,120 kPa 4,944 kPa 5,438 kPa
Head Length 177.8 mm Side 2: 254.0 mm Max Torque 8,281 N-m 10,351 N-m 12,421 N-m 13,664 N-m
Weight 396 kg Weight 613 kg Stall Pressure 5,273 kPa 6,592 kPa 7,910 kPa 8,701 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 13,248 N-m 16,562 N-m 19,874 N-m 21,861 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 121.13 0.26 120.40 1.00 121.16 0.24 120.12 1.28
0 OS 121.92 -0.53 121.21 0.19 121.82 -0.42 120.93 0.47
1
2
3
4 OS 2-OS 122.48 -1.08 122.15 -0.75 121.84 -0.45 122.48 -1.08 122.48 -1.08 121.56 -0.17
5
6
7
8
Reline Lengths (mm) Breen: Max 4521 Min 4216 Willis: Max 4521 Min 4216 Alternate Stator OD: 241.3 mm
14,000 4.000
3.500
12,000
Fit Increase (mm)
3.000
10,000
Torque (Nm)
2.500
8,000
2.000
6,000
1.500
4,000
1.000
2,000 0.500
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 20 40 60 80 100 120 140
350
250 4542 LPM 4542 LPM
Mechanical Power (Kw)
300
200
250
Speed (rpm)
3407 LPM
3407 LPM
150 200
50
50
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 200
Power Section Specification (Metric Units) 962-3460
962-3460
9.62”3:4
9.62" 3:4Lobes
Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5563 mm Overall Length 5791 mm Flow Range 2271-4542 LPM
Avg. Diameter 121.40 mm Tube OD 244.3 mm Rev per Unit Volume 0.06 Rev/L
Contour Length 5385 mm Contour Length 5334 mm Speed Range 135-271 RPM
Eccentricity 15.23 mm Tube ID 199.39 mm No Load Pressure Loss 1003 kPa
Major Diameter 151.85 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 139.70 mm Side 1: 228.6 mm Max Pressure 4,702 kPa 5,878 kPa 7,053 kPa 7,758 kPa
Head Length 177.8 mm Side 2: 228.6 mm Max Torque 11,763 N-m 14,704 N-m 17,645 N-m 19,409 N-m
Weight 518 kg Weight 796 kg Stall Pressure 7,523 kPa 9,404 kPa 11,284 kPa 12,413 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 18,821 N-m 23,527 N-m 28,230 N-m 31,054 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 121.06 0.34 120.85 0.54 120.32 1.08 120.78 0.62 120.83 0.57 119.91 1.48
1
2
3
4 OS OS 122.45 -1.06 122.30 -0.91 121.79 -0.40 122.12 -0.73 122.45 -1.06 121.56 -0.17
5
6
7
8
Reline Lengths (mm) Breen: Max 5791 Min 5436 Willis: Max 5791 Min 5486 Alternate Stator OD: - mm
4.000
20,000
3.500
Fit Increase (mm)
3.000
Torque (Nm)
15,000
2.500
2.000
10,000
1.500
1.000
5,000
0.500
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
200 400
3407 LPM
Speed (rpm)
2271 LPM
100 200
2271 LPM
50 100
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 201
Power Section Specification (Metric Units) 962-4556
962-4556
9.62” 4:5
9.62" 4:5 Lobes
Lobes 5.6 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3645 mm Overall Length 3912 mm Flow Range 1893-4164 LPM
Avg. Diameter 134.02 mm Tube OD 244.3 mm Rev per Unit Volume 0.07 Rev/L
Contour Length 3411 mm Contour Length 3404 mm Speed Range 123-272 RPM
Eccentricity 13.52 mm Tube ID 200.03 mm No Load Pressure Loss 974 kPa
Major Diameter 161.06 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 139.70 mm Side 1: 254.0 mm Max Pressure 4,702 kPa 5,878 kPa 7,053 kPa 7,758 kPa
Head Length 233.4 mm Side 2: 254.0 mm Max Torque 10,510 N-m 13,138 N-m 15,766 N-m 17,343 N-m
Weight 416 kg Weight 518 kg Stall Pressure 7,523 kPa 9,404 kPa 11,284 kPa 12,413 kPa
Thread Form 3 1/2" API FH Material Alloy Steel Stall Torque 16,817 N-m 21,021 N-m 25,224 N-m 27,748 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 134.75 -0.72 134.06 -0.04 134.80 -0.77 133.86 0.17
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 3912 Min 3607 Alternate Stator OD: - mm
18,000
3.500
16,000
3.000
14,000
Fit Increase (mm)
2.500
Torque (Nm)
12,000
10,000 2.000
8,000
1.500
6,000
1.000
4,000
0.500
2,000
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
450
4164 LPM
250 4164 LPM
400
Mechanical Power (Kw)
350
200
Speed (rpm)
200
100 1893 LPM
150
1893 LPM
100
50
50
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 202
Power Section Specification (Metric Units) 962-5630
962-5630
9.62”5:6
9.62" 5:6Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4242 mm Overall Length 4521 mm Flow Range 2271-4542 LPM
Avg. Diameter 135.65 mm Tube OD 244.3 mm Rev per Unit Volume 0.03 Rev/L
Contour Length 4028 mm Contour Length 4013 mm Speed Range 66-133 RPM
Eccentricity 11.37 mm Tube ID 200.03 mm No Load Pressure Loss 1096 kPa
Major Diameter 158.40 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 139.70 mm Side 1: 254.0 mm Max Pressure 2,034 kPa 2,543 kPa 3,051 kPa 3,356 kPa
Head Length 213.4 mm Side 2: 254.0 mm Max Torque 9,937 N-m 12,421 N-m 14,905 N-m 16,396 N-m
Weight 493 kg Weight 602 kg Stall Pressure 3,254 kPa 4,068 kPa 4,881 kPa 5,369 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 15,897 N-m 19,874 N-m 23,846 N-m 26,230 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T S 134.85 0.80 134.34 1.31 134.75 0.90 134.04 1.61
0 S OS 135.41 0.24 136.09 -0.44 135.41 0.24 135.23 0.42 136.50 -0.85 135.23 0.42
1
2
3
4 OS 136.09 -0.44 136.09 -0.44
5
6
7
8
Reline Lengths (mm) Breen: Max 4521 Min 4166 Willis: Max 4521 Min 4216 Alternate Stator OD: 241.3/31.8 mm
18,000
3.500
16,000
3.000
14,000
Fit Increase (mm)
2.500
Torque (Nm)
12,000
10,000 2.000
8,000
1.500
6,000
1.000
4,000
0.500
2,000
0 0.000
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 0 20 40 60 80 100 120 140
4542 LPM
120
200 4542 LPM
Mechanical Power (Kw)
100
3407 LPM
Speed (rpm)
150
80
3407 LPM
60 2271 LPM 100
40
2271 LPM
50
20
0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 203
Power Section Specification (Metric Units) 962-5640
962-5640
9.62”5:6
9.62" 5:6Lobes
Lobes44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5575 mm Overall Length 5791 mm Flow Range 2271-4542 LPM
Avg. Diameter 134.01 mm Tube OD 244.3 mm Rev per Unit Volume 0.03 Rev/L
Contour Length 5398 mm Contour Length 5334 mm Speed Range 61-123 RPM
Eccentricity 11.43 mm Tube ID 200.03 mm No Load Pressure Loss 1107 kPa
Major Diameter 156.87 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 139.70 mm Side 1: 228.6 mm Max Pressure 3,054 kPa 3,818 kPa 4,581 kPa 5,039 kPa
Head Length 177.8 mm Side 2: 228.6 mm Max Torque 16,061 N-m 20,076 N-m 24,091 N-m 26,500 N-m
Weight 651 kg Weight 774 kg Stall Pressure 4,886 kPa 6,108 kPa 7,329 kPa 8,062 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 25,695 N-m 32,122 N-m 38,543 N-m 42,398 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 133.68 0.33 133.48 0.53
1
2 S 134.72 -0.71 134.14 -0.13 134.77 -0.76 133.88 0.13
3
4 OS 136.14 -2.13 135.74 -1.73 136.50 -2.49 135.33 -1.32
5
6
7 2-OS 137.01 -3.00 136.27 -2.26 137.01 -3.00 136.07 -2.06
8
Reline Lengths (mm) Breen: Max 5794 Min 5438 Willis: Max 5791 Min 5486 Alternate Stator OD: 284.5/31.8 mm
3.500
25,000
3.000
20,000
Fit Increase (mm)
2.500
Torque (Nm)
15,000 2.000
1.500
10,000
1.000
5,000
0.500
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 0 20 40 60 80 100 120 140
100 250
Speed (rpm)
3407 LPM
80 200
3407 LPM
60 150
2271 LPM
20 50
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 204
Power Section Specification (Metric Units) 962-6730
962-6730
9.62”6:7
9.62" 6:7Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3759 mm Overall Length 3950 mm Flow Range 2271-4542 LPM
Avg. Diameter 143.74 mm Tube OD 244.3 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 3581 mm Contour Length 3543 mm Speed Range 98-197 RPM
Eccentricity 10.25 mm Tube ID 200.15 mm No Load Pressure Loss 1471 kPa
Major Diameter 164.24 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 139.70 mm Side 1: 203.2 mm Max Pressure 2,220 kPa 2,775 kPa 3,330 kPa 3,663 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 7,147 N-m 8,934 N-m 10,721 N-m 11,793 N-m
Weight 469 kg Weight 563 kg Stall Pressure 3,552 kPa 4,440 kPa 5,328 kPa 5,860 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 11,436 N-m 14,295 N-m 17,154 N-m 18,867 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 143.64 0.10 143.64 0.10
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 3950 Min 3752 Willis: Max - Min - Alternate Stator OD: - mm
12,000
2.500
10,000
Fit Increase (mm)
2.000
Torque (Nm)
8,000
1.500
6,000
1.000
4,000
0.500
2,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
4542 LPM
200 200
Mechanical Power (Kw)
4542 LPM
Speed (rpm)
150 150
3407 LPM 3407 LPM
100 100
2271 LPM
2271 LPM
50 50
0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 205
Power Section Specification (Metric Units) 962-6750
962-6750
9.62”6:7
9.62" 6:7Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5131 mm Overall Length 5537 mm Flow Range 2271-4542 LPM
Avg. Diameter 140.92 mm Tube OD 244.3 mm Rev per Unit Volume 0.03 Rev/L
Contour Length 4953 mm Contour Length 5131 mm Speed Range 76-153 RPM
Eccentricity 10.87 mm Tube ID 199.44 mm No Load Pressure Loss 1102 kPa
Major Diameter 162.65 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 146.05 mm Side 1: 203.2 mm Max Pressure 4,654 kPa 5,818 kPa 6,981 kPa 7,679 kPa
Head Length 177.8 mm Side 2: 203.2 mm Max Torque 19,323 N-m 24,153 N-m 28,984 N-m 31,883 N-m
Weight 621 kg Weight 745 kg Stall Pressure 7,446 kPa 9,308 kPa 11,169 kPa 12,286 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 30,915 N-m 38,646 N-m 46,372 N-m 51,010 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S S 141.02 -0.11 140.79 0.12 140.31 0.61 140.82 0.10 140.82 0.10 140.06 0.86
1
2
3
4 OS 141.73 -0.82 141.61 -0.69
5
6
7
8
Reline Lengths (mm) Breen: Max 5283 Min 4928 Willis: Max 5537 Min 5232 Alternate Stator OD: 284.5/31.8 mm
35,000
3.000
30,000
2.500
Fit Increase (mm)
25,000
Torque (Nm)
2.000
20,000
1.500
15,000
1.000
10,000
5,000 0.500
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
160
500
140 4542 LPM
Mechanical Power (Kw)
4542 LPM
120 400
Speed (rpm)
2271 LPM
60 200
40 2271 LPM
100
20
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 206
Power Section Specification (Metric Units) 962-6760
962-6760
9.62”6:7
9.62" 6:7Lobes
Lobes66Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6096 mm Overall Length 6350 mm Flow Range 2271-4542 LPM
Avg. Diameter 140.92 mm Tube OD 244.3 mm Rev per Unit Volume 0.04 Rev/L
Contour Length 5918 mm Contour Length 5893 mm Speed Range 97-195 RPM
Eccentricity 10.87 mm Tube ID 200.15 mm No Load Pressure Loss 1720 kPa
Major Diameter 162.65 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 139.70 mm Side 1: 228.6 mm Max Pressure 4,888 kPa 6,110 kPa 7,332 kPa 8,065 kPa
Head Length 177.8 mm Side 2: 228.6 mm Max Torque 15,890 N-m 19,863 N-m 23,836 N-m 26,219 N-m
Weight 731 kg Weight 921 kg Stall Pressure 7,820 kPa 9,776 kPa 11,731 kPa 12,904 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 25,422 N-m 31,781 N-m 38,136 N-m 41,950 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 140.92 0.00 140.69 0.22
1
2
3
4 OS 142.04 -1.12 142.04 -1.12
5
6
7
8
Reline Lengths (mm) Breen: Max 6350 Min 5994 Willis: Max - Min - Alternate Stator OD: 284.5/31.8 mm
25,000 2.500
20,000
Fit Increase (mm)
2.000
Torque (Nm)
15,000 1.500
10,000 1.000
5,000 0.500
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
200 400
Mechanical Power (Kw)
100 200
2271 LPM 2271 LPM
150
50 100
50
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 207
Power Section Specification (Metric Units) 962-7848 (B)
962-7848 (B)
9.62” 7:8
9.62" 7:8 Lobes
Lobes 4.8 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5931 mm Overall Length 6261 mm Flow Range 2271-4542 LPM
Avg. Diameter 144.56 mm Tube OD 244.3 mm Rev per Unit Volume 0.03 Rev/L
Contour Length 5729 mm Contour Length 5753 mm Speed Range 69-139 RPM
Eccentricity 8.96 mm Tube ID 199.44 mm No Load Pressure Loss 1339 kPa
Major Diameter 162.48 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 152.40 mm Side 1: 254.0 mm Max Pressure 4,144 kPa 5,180 kPa 6,216 kPa 6,838 kPa
Head Length 201.4 mm Side 2: 254.0 mm Max Torque 18,509 N-m 23,137 N-m 27,764 N-m 30,540 N-m
Weight 754 kg Weight 841 kg Stall Pressure 6,630 kPa 8,288 kPa 9,945 kPa 10,940 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 29,613 N-m 37,019 N-m 44,420 N-m 48,864 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 143.15 1.41 142.72 1.84 143.13 1.44 142.49 2.07
1
2
3
4 OS 143.71 0.85 143.28 1.28 143.66 0.90 143.23 1.33
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 6261 Min 5956 Alternate Stator OD: 284.5/31.8 mm
30,000 3.000
25,000 2.500
Fit Increase (mm)
Torque (Nm)
20,000 2.000
15,000 1.500
10,000 1.000
5,000 0.500
0 0.000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 20 40 60 80 100 120 140
140 400
4542 LPM
4542 LPM
350
Mechanical Power (Kw)
120
300
100
Speed (rpm)
3407 LPM
250 3407 LPM
80
200
60 2271 LPM
150
2271 LPM
40
100
20 50
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 0 2,000 4,000 6,000 8,000 10,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 208
Power Section Specification (Metric Units) 962-7857
962-7857
9.62” 7:8
9.62" 7:8 Lobes
Lobes 5.7 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5864 mm Overall Length 6096 mm Flow Range 2271-4542 LPM
Avg. Diameter 143.89 mm Tube OD 244.3 mm Rev per Unit Volume 0.03 Rev/L
Contour Length 5639 mm Contour Length 5588 mm Speed Range 74-149 RPM
Eccentricity 8.99 mm Tube ID 199.44 mm No Load Pressure Loss 1219 kPa
Major Diameter 161.87 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 139.70 mm Side 1: 254.0 mm Max Pressure 5,075 kPa 6,344 kPa 7,613 kPa 8,374 kPa
Head Length 225.6 mm Side 2: 254.0 mm Max Torque 21,087 N-m 26,359 N-m 31,631 N-m 34,794 N-m
Weight 751 kg Weight 816 kg Stall Pressure 8,120 kPa 10,150 kPa 12,180 kPa 13,398 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 33,739 N-m 42,174 N-m 50,609 N-m 55,670 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 143.66 0.23 143.26 0.63 143.66 0.23 143.08 0.81
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 6096 Min 5791 Alternate Stator OD: 284.5/31.8 mm
35,000
3.000
30,000
2.500
Fit Increase (mm)
25,000
Torque (Nm)
2.000
20,000
1.500
15,000
1.000
10,000
5,000 0.500
0 0.000
0 2,000 4,000 6,000 8,000 10,000 0 20 40 60 80 100 120 140
120
400
100 3407 LPM
Speed (rpm)
2271 LPM
60
200
40 2271 LPM
100
20
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 209
Power Section Specification (Metric Units) 1125-3436
1125-3436
11.25”3:4
11.25" 3:4Lobes
Lobes3.6
3.6 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4890 mm Overall Length 5105 mm Flow Range 3785-5678 LPM
Avg. Diameter 141.57 mm Tube OD 285.8 mm Rev per Unit Volume 0.03 Rev/L
Contour Length 4638 mm Contour Length 4572 mm Speed Range 117-175 RPM
Eccentricity 17.71 mm Tube ID 234.95 mm No Load Pressure Loss 1195 kPa
Major Diameter 176.99 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 165.10 mm Side 1: 266.7 mm Max Pressure 2,227 kPa 2,784 kPa 3,341 kPa 3,675 kPa
Head Length 251.5 mm Side 2: 266.7 mm Max Torque 10,768 N-m 13,461 N-m 16,153 N-m 17,768 N-m
Weight 623 kg Weight 933 kg Stall Pressure 3,563 kPa 4,454 kPa 5,344 kPa 5,879 kPa
Thread Form 4 1/2" API Reg Material Alloy Steel Stall Torque 17,229 N-m 21,537 N-m 25,841 N-m 28,428 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 140.13 1.44 139.42 2.15 140.34 1.23 138.89 2.68
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max - Min - Willis: Max 5105 Min 4801 Alternate Stator OD: 292.1 mm
18,000
5.000
16,000
14,000
Fit Increase (mm)
4.000
Torque (Nm)
12,000
10,000 3.000
8,000
2.000
6,000
4,000
1.000
2,000
0 0.000
0 1,000 2,000 3,000 4,000 5,000 0 20 40 60 80 100 120 140
180
300
5678 LPM 5678 LPM
160
Mechanical Power (Kw)
140 250
4732 LPM
Speed (rpm)
60 100
40
50
20
0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 0 1,000 2,000 3,000 4,000 5,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 210
Power Section Specification (Metric Units) 1125-6755
1125-6755
11.25”6:7
11.25" 6:7Lobes
Lobes5.5
5.5 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6096 mm Overall Length 6350 mm Flow Range 3407-6814 LPM
Avg. Diameter 170.40 mm Tube OD 285.8 mm Rev per Unit Volume 0.02 Rev/L
Contour Length 5842 mm Contour Length 5817 mm Speed Range 56-112 RPM
Eccentricity 12.37 mm Tube ID 234.95 mm No Load Pressure Loss 4271 kPa
Major Diameter 195.14 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 165.10 mm Side 1: 266.7 mm Max Pressure 1,896 kPa 2,370 kPa 2,844 kPa 3,128 kPa
Head Length 254.0 mm Side 2: 266.7 mm Max Torque 16,082 N-m 20,103 N-m 24,124 N-m 26,536 N-m
Weight 1082 kg Weight 1119 kg Stall Pressure 3,033 kPa 3,792 kPa 4,550 kPa 5,005 kPa
Thread Form 62C0013 Material Alloy Steel Stall Torque 25,727 N-m 32,165 N-m 38,595 N-m 42,454 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 169.90 0.50 169.80 0.60
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 6350 Min 6045 Willis: Max - Min - Alternate Stator OD: - mm
25,000 10.000
20,000
Fit Increase (mm)
8.000
Torque (Nm)
15,000 6.000
10,000 4.000
5,000 2.000
0 0.000
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 0 20 40 60 80 100 120 140
6814 LPM
6814 LPM
100 250
Mechanical Power (Kw)
80 200
5110 LPM
Speed (rpm)
5110 LPM
60 150
3407 LPM
40 100
3407 LPM
20 50
0 0
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 211
Power Section Specification (Metric Units) 1125-6756
1125-6756
11.25”6:7
11.25" 6:7Lobes
Lobes5.6
5.6 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 6147 mm Overall Length 6350 mm Flow Range 3785-6814 LPM
Avg. Diameter 167.61 mm Tube OD 285.8 mm Rev per Unit Volume 0.02 Rev/L
Contour Length 5905 mm Contour Length 5817 mm Speed Range 60-109 RPM
Eccentricity 12.87 mm Tube ID 234.95 mm No Load Pressure Loss 5753 kPa
Major Diameter 193.34 mm Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR 280XT
Head Diameter 165.10 mm Side 1: 266.7 mm Max Pressure 434 kPa 543 kPa 651 kPa 716 kPa
Head Length 242.0 mm Side 2: 266.7 mm Max Torque 3,773 N-m 4,717 N-m 5,660 N-m 6,226 N-m
Weight 1017 kg Weight 1142 kg Stall Pressure 694 kPa 868 kPa 1,041 kPa 1,145 kPa
Thread Form 62C0013 Material Alloy Steel Stall Torque 6,034 N-m 7,547 N-m 9,051 N-m 9,955 N-m
o
Stator Minors and Fit (mm) at 21 C
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Size Breen Willis Breen Fit Willis Fit Breen Fit Willis Fit Willis Fit Breen Fit Willis Fit Willis Fit
T
0 S 167.36 0.25 167.31 0.30
1
2
3
4
5
6
7
8
Reline Lengths (mm) Breen: Max 6350 Min 6045 Willis: Max - Min - Alternate Stator OD: - mm
7,000
10.000
6,000
Fit Increase (mm)
8.000
5,000
Torque (Nm)
4,000 6.000
3,000
4.000
2,000
2.000
1,000
0 0.000
0 200 400 600 800 1,000 0 20 40 60 80 100 120 140
6814 LPM
6814 LPM 60
100
Mechanical Power (Kw)
50
80
5300 LPM
Speed (rpm)
5300 LPM
40
60
3785 LPM 30
3785 LPM
40
20
20
10
0 0
0 100 200 300 400 500 600 700 800 900 0 200 400 600 800 1,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
2/24/2015
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 212
ERT Power Sections
www.nov.com/PowerSections
ERT OPERATIONAL GUIDELINES
NOV Power Sections Catalog
REV. 00
This section provides information that will allow the user to make informed decisions as to how to adjust ERT loading conditions
to ensure ROP and service life objectives are achieved. Specific recommendations for fit, differential pressure and flow rate are
provided, as well as the means to adjust loading conditions for different operational temperatures.
Sizing the power section entails reducing the power section’s shop fit to compensate for the elastomer’s expected thermal growth
during operation, thereby reducing the stress created due to elastomer compression.
Odd Lobe Rotors : Fit = (Rotor “Valley” to “Crest” Diameter) - Stator Minor Diameter
To normalize the measured “shop fit”, simply add the numbers in the graph to the measured shop fit based on the temperature of
the stator’s elastomer when its minor diameter was measured. For example, referencing this table, 0.004” should be added to the
shop fit measurement if the stator was 40oF when measured. This sum will be used to determine the recommended operational
temperature for the fit.
Depending upon the storage conditions of the stator, the shop temperature may not be the same as the stator’s temperature. This
can occur when storing the stator outside at extreme temperatures and then measuring the stator inside without allowing the
stator’s temperature to normalize. In situations like this, a direct measurement of stator’s elastomer temperature should be taken
or the stator temperature should be allowed to reach equilibrium with the shop’s temperature before the stator’s minor diameter is
measured.
Color coded areas are used to highlight acceptable fit and temperature range combinations. The two green zones represent
the recommended temperature ranges for each fit and produce compressions of 0% to 2%. The dark green area produces
compressions of 0.5% to 1.5% and provides the optimal combination of power, torque and operational life.
The yellow zones represent temperature ranges in which ERTs can be run, but at the risk of shorter run times and decreased power
output at lower compression levels. These ranges, from -0.5%–0.0% and 2.0–2.5%, are considered acceptable, but performance
and/or life may be inferior to that obtained when running in the green zones.
Example
An ERT user intends to run their ERT at 175°F (79°C). What range of fits would be recommended for this application?
Dark Green Zone - Moving upward from 175°F to the dark green zone and then to the right axis indicates that the “green zone” shop
fit for this application will be between -0.015” and -0.003” (-0.38 and -0.08 mm).
Light Green Zones - Run life when operated at tighter fits of between -0.003” and 0.001” (0.08 and 0.02mm) may be less than that
obtained from reduced fits, but power output will be higher.
Power output will be reduced when operated at looser fits of between -0.015” and -0.018” (-0.38 and -0.46 mm). This may decrease
drilling rates and contribute to greater fluctuations in torque output and therefore bit speed. The power section may see higher
dynamic loading.
Example
Continuing the above example, if the user expects the drilling fluid to “swell” the elastomer by about 0.005” (0.13 mm), what shop fit
is recommended for an operation at 175°F (79°C)?
Recommended fit with no elastomer swell = -0.015” and -0.003” (-0.38 and -0.08 mm)
Recommended fit with elastomer swell = -0.020” to -0.008” (-0.51 to -0.20 mm)
The minor diameters of ERT stators can also increase during use, due to wear, compression set or sometimes fluid interaction. If
minor diameter growth is expected in a particular application the user should add the expected growth to the shop fit to correct for
this change.
Given the multitude of factors that affect power section loading and elastomer strength, it is not possible to provide a universal
differential pressure recommendation that will be suitable for all applications. It is possible, however, to provide a baseline
differential pressure loading level that the ERT user can adjust based on their experience and the specific operational
conditions to which the ERT will be exposed.
The differential pressure loading levels in the table below represent the maximum that would be recommended at 200°F (93°C).
Multiplying the number of stages by the differential pressure/stage will provide the total baseline differential pressure that is recom-
mended. The “Flow/Speed Line” categories refer to the corresponding curves on each ERT’s speed graph.
Note that the loading levels decrease at high flow rates due to the higher centrifugal loading and cycle rates produced. These load-
ing levels should also be reduced at higher temperatures, or when running in fluids that tend to weaken the elastomer. Conversely,
higher loading levels may be possible at lower temperatures, lower flow rates or benign drilling fluids.
Recommendations regarding how to adjust these loading levels are presented in Adjusting ERT Differential Pressure for
Operational Temperature.
The example below explains how to adjust differential pressures for different operational temperatures.
Example
An ERT user has obtained excellent runs with their 675ERTcr7850 at 250°F (121°C) and would like to know how they should adjust
the loading conditions used at 250°F to obtain similar reliability at both 200°F (93°C) and 300°F (149°C). The fit has already been
adjusted for operation at these temperatures.
Referencing the figure below, the ERT Load Factors are 0.6 at 250°F and about 0.78 at 200°F. The ratio of these factors suggests that
the ERT can safely handle a 30% greater load at 200°F than at 250°F. This calculation is depicted below:
Based on the above fit, if the user was running the ERT at 100 psi/stage at 250oF, they could potentially raise the loading level to 130
psi/stage at 200oF and obtain the same power section run life.
Typically, only modest changes in flow rate are possible due to the need to ensure adequate hole cleaning and a sufficient supply
of hydraulic energy to the power section. This is especially true with ERT power sections due to their typically exceptional ROPs. A
1% increase in speed is recommended for every 10°F decrease in operational temperature, and a 2% decrease in speed for every
10°F increase in temperature. Consequently, most of the change in power section loading will be provided by changes in differential
pressure.
The following describes in detail a method to determine recommended differential pressures and flow rates. For this example, the
“baseline” loading conditions at 250°F are: 400 psi and 550 gpm. For clarity, only English units are used.
This indicates that the ERT can be loaded approximately 30% higher at 200°F than at 250°F.
• Adjust the flow rate up by 1% (for lower operational temperatures) or down 2% (for higher operational temperatures)
for every 10°F of temperature change from the flow rate that formed the baseline operational condition.
• Repeating the exercise for 300°F operation produces the following numbers:
-0.006
0.015 POB Shop Fit Correction
-0.002
0.005
0.000
0.000
0.002
-0.005
0.004
-0.010
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
475ERT4536 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.006
UF114 Shop Fit Correction
0.010
0.005 -0.002
0.000 0.000
-0.005 0.002
-0.010 0.004
Shop Fit (IN)
0.006
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
475ERT4536 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.008
0.015 POB Shop Fit Correction
-0.006
0.005 -0.002
0.000
0.000
0.002
-0.005 0.004
0.006
-0.010
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
475ERT4554 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.005
UF114 Shop Fit Correction
-0.004
0.010
0.005 -0.002
-0.001
0.000 0.000
0.001
-0.005 0.002
0.003
-0.010
Shop Fit (IN)
0.004
0.005
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
475ERT4554 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.005
0.015 POB Shop Fit Correction
-0.004
0.000
0.000
0.001
0.002
-0.005
0.003
-0.010 0.004
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
475ERT6725 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.005
UF114 Shop Fit Correction
-0.004
0.010
0.005 -0.002
-0.001
0.000 0.000
0.001
-0.005 0.002
0.003
-0.010
Shop Fit (IN)
0.004
0.005
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
475ERT6725 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.005
0.015 POB Shop Fit Correction
-0.004
0.000
0.000
0.001
0.002
-0.005
0.003
-0.010 0.004
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
475ERTcr7838 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.005
UF114 Shop Fit Correction
-0.004
0.005 -0.002
-0.001
0.000 0.000
0.001
-0.005 0.002
0.003
-0.010
Shop Fit (IN)
0.004
0.005
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
475ERTcr7838 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.008
0.015 POB Shop Fit Correction
-0.006
0.005 -0.002
0.000
0.000
0.002
-0.005 0.004
0.006
-0.010
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
500ERTcr6780 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.008
UF114 Shop Fit Correction
-0.004
0.005
-0.002
0.000 0.000
0.002
-0.005
0.004
-0.010 0.006
Shop Fit (IN)
0.008
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
500ERTcr6780 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
0.015
-0.005
0.010 POB Shop Fit Correction
-0.004
-0.005 0.001
0.002
-0.010 0.003
-0.025
-0.030
-0.035
-0.040
-0.045
500ERTcr7850 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.005
UF114 Shop Fit Correction
-0.004
0.005 -0.002
-0.001
0.000 0.000
0.001
-0.005 0.002
0.003
-0.010
Shop Fit (IN)
0.004
0.005
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
500ERTcr7850 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.008
0.015 POB Shop Fit Correction
-0.006
0.005 -0.002
0.000
0.000
0.002
-0.005 0.004
0.006
-0.010
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
650ERT6722 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.008
UF114 Shop Fit Correction
0.010 -0.006
0.000 0.000
0.002
-0.005
0.004
-0.010 0.006
Shop Fit (IN)
0.008
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
650ERT6722 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.008
0.015 POB Shop Fit Correction
-0.006
0.005 -0.002
0.000
0.000
0.002
-0.005 0.004
0.006
-0.010
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
650ERT6727 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.008
UF114 Shop Fit Correction
0.010 -0.006
0.000 0.000
0.002
-0.005
0.004
-0.010 0.006
Shop Fit (IN)
0.008
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
650ERT6727 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.008
0.015 POB Shop Fit Correction
-0.006
0.005 -0.002
0.000
0.000
0.002
-0.005 0.004
0.006
-0.010
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERT6729 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.008
UF114 Shop Fit Correction
0.010 -0.006
0.000 0.000
0.002
-0.005
0.004
-0.010 0.006
Shop Fit (IN)
0.008
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERT6729 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.010
0.015 POB Shop Fit Correction
-0.008
0.000
0.000
0.002
0.004
-0.005
0.006
-0.010 0.008
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERT6731 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.008
UF114 Shop Fit Correction
0.010 -0.006
0.000 0.000
0.002
-0.005
0.004
-0.010 0.006
Shop Fit (IN)
0.008
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERT6731 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.010
0.015 POB Shop Fit Correction
-0.008
0.000
0.000
0.002
0.004
-0.005
0.006
-0.010 0.008
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERT6748 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.008
UF114 Shop Fit Correction
0.010 -0.006
0.000 0.000
0.002
-0.005
0.004
-0.010 0.006
Shop Fit (IN)
0.008
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERT6748 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.006
0.015 POB Shop Fit Correction
-0.002
0.005
0.000
0.000
0.002
-0.005
0.004
-0.010
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERTcr4570 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.005
UF114 Shop Fit Correction
-0.004
0.005 -0.002
-0.001
0.000 0.000
0.001
-0.005 0.002
0.003
-0.010
Shop Fit (IN)
0.004
0.005
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERTcr4570 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.008
0.015 POB Shop Fit Correction
-0.006
0.005 -0.002
0.000
0.000
0.002
-0.005 0.004
0.006
-0.010
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERTcr6750 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.005
UF114 Shop Fit Correction
-0.004
0.005 -0.002
-0.001
0.000 0.000
0.001
-0.005 0.002
0.003
-0.010
Shop Fit (IN)
0.004
0.005
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERTcr6750 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.004
0.015 POB Shop Fit Correction
-0.003
0.005 -0.001
0.000
0.000
0.001
-0.005 0.002
0.003
-0.010
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERTcr7830 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.004
UF114 Shop Fit Correction
-0.002
0.005
-0.001
0.000 0.000
0.001
-0.005
0.002
-0.010 0.003
Shop Fit (IN)
0.004
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERTcr7830 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.004
0.015 POB Shop Fit Correction
-0.003
0.005 -0.001
0.000
0.000
0.001
-0.005 0.002
0.003
-0.010
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERTcr7850 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.005
UF114 Shop Fit Correction
-0.004
0.005 -0.002
-0.001
0.000 0.000
0.001
-0.005 0.002
0.003
-0.010
Shop Fit (IN)
0.004
0.005
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
675ERTcr7850 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.010
0.015 POB Shop Fit Correction
-0.008
0.000
0.000
0.002
0.004
-0.005
0.006
-0.010 0.008
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
800ERT5652 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.008
UF114 Shop Fit Correction
0.010 -0.006
0.000 0.000
0.002
-0.005
0.004
-0.010 0.006
Shop Fit (IN)
0.008
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
800ERT5652 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.008
0.015 POB Shop Fit Correction
-0.006
0.005 -0.002
0.000
0.000
0.002
-0.005 0.004
0.006
-0.010
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
825ERTcr7840 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.006
UF114 Shop Fit Correction
0.005 -0.002
0.000 0.000
-0.005 0.002
-0.010 0.004
Shop Fit (IN)
0.006
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
825ERTcr7840 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
0.020
-0.010
0.015 POB Shop Fit Correction
-0.008
0.000
0.000
0.002
0.004
-0.005
0.006
-0.010 0.008
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
965ERT6735 lined with POB
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
0.020
0.015
-0.008
UF114 Shop Fit Correction
0.010 -0.006
0.000 0.000
0.002
-0.005
0.004
-0.010 0.006
Shop Fit (IN)
0.008
-0.015
0 20 40 60 80 100 120
Shop Temperature (DegF)
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
965ERT6735 lined with UF114
-0.050
75 100 125 150 175 200 225 250 275 300 325 350 375
Temperature (DegF)
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field
performance may vary with field operational conditions.
2-OS
0.005
Reline Lengths (in.) Max 128.0 Min 122.0
Alt. Stator OD (in.) 5.000 0
Alt. Rotor Diameter (in.) 2.246 0 50 100 150 200 250
Change in Temperature (F)
180
160
Mechanical Power (hp)
80
40
225 GPM 20
0
200 0 200 400 600 800 1,000 1,200
Speed (rpm)
Torque
3,500
150 150 GPM
Max DP for reliable operation will vary based
3,000 on operational conditions. Refer to ERT
Operational Guidelines for guidance.
2,500
100
Torque (ft-lbs)
2,000
1,500
50
1,000
500
0 0
0 250 500 750 1,000 1,250 0 200 400 600 800 1,000 1,200
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 238
Power Section ERT Spec (Imperial Units) 475ERT4554
475ERT4554
4.75” 4:5
4.75" 4:5 Lobes 5.4
5.4Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 176.5 in. Overall Length 200.0 in. Flow Range 150-300 GPM
Avg. Diameter 2.260 in. Tube OD 4.75 in. Rev per Unit Volume 1.07 Rev/Gal
Contour Length 170.5 in. Contour Length 168.0 in. Speed Range 160-320 RPM
Eccentricity 0.250 in. Tube ID 3.750 in. No Load Pressure Loss 175 psi
Major Diameter 2.760 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 3.150 in. Side 1: 8.0 in. Max Recommended Pressure 1,080 psi 1,231 psi
Head Length 6.00 in. Side 2: 24.0 in. Torque at Max Rec Pressure 3,131 ft-lbs 3,645 ft-lbs
Weight 204 lbs Weight 500 lbs Stall Pressure 3,400 psi 3,850 psi
Thread Form 2 7/8" API PAC Material Alloy Steel Stall Torque 7,130 ft-lbs 9,050 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.025
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit
0.02
2-US
2-OS
0.005
Reline Lengths (in.) Max 200.0 Min 194.0
Alt. Stator OD (in.) 5.000 0
Alt. Rotor Diameter (in.) 2.250 2.245 0 50 100 150 200 250
Change in Temperature (F)
250
Mechanical Power (hp)
100
250 150 GPM
50
225 GPM
0
200 0 500 1,000 1,500 2,000
Speed (rpm)
Torque
5,000
150 150 GPM
4,500 Max DP for reliable operation will vary based
on operational conditions. Refer to ERT
4,000 Operational Guidelines for guidance.
3,500
100
Torque (ft-lbs)
3,000
2,500
2,000
50
1,500
1,000
500
0 0
0 250 500 750 1,000 1,250 1,500 1,750 0 500 1,000 1,500 2,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 239
Power Section ERT Spec (Imperial Units) 475ERT6725
475ERT6725
4.75” 6:7
4.75" 6:7 Lobes 2.5
2.5Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 158.0 in. Overall Length 182.0 in. Flow Range 125-325 GPM
Avg. Diameter 2.537 in. Tube OD 4.75 in. Rev per Unit Volume 0.45 Rev/Gal
Contour Length 152.0 in. Contour Length 150.0 in. Speed Range 55-145 RPM
Eccentricity 0.181 in. Tube ID 3.750 in. No Load Pressure Loss 190 psi
Major Diameter 2.899 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 3.150 in. Side 1: 8.0 in. Max Recommended Pressure 500 psi 570 psi
Head Length 6.00 in. Side 2: 24.0 in. Torque at Max Rec Pressure 2,789 ft-lbs 3,244 ft-lbs
Weight 191 lbs Weight 379 lbs Stall Pressure 2,100 psi 2,400 psi
Thread Form 2 3/8" PAC Material Alloy Steel Stall Torque 7,850 ft-lbs 10,300 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.025
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit
0.02
2-US
2-OS
0.005
Reline Lengths (in.) Max 182.0 Min 176.0
Alt. Stator OD (in.) 5.000 0
Alt. Rotor Diameter (in.) 2.533 0 50 100 150 200 250
Change in Temperature (F)
100
Mechanical Power (hp)
325 GPM
140 325 GPM
80
60 225 GPM
120
40
125 GPM
20
100
0
225 GPM
0 100 200 300 400 500 600 700 800
Speed (rpm)
80
Torque
4,500
40 2,500
2,000
1,500
20
1,000
500
0 0
0 250 500 750 1,000 0 100 200 300 400 500 600 700 800
Differential Pressure (psi) Differential Pressure (psi)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 240
Power Section ERT Spec (Imperial Units) 475ERTcr7838
475ERTcr7838
4.75” 7:8
4.75" 7:8 Lobes 3.8
3.8Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 178.0 in. Overall Length 187.0 in. Flow Range 150-300 GPM
Avg. Diameter 2.619 in. Tube OD 4.75 in. Rev per Unit Volume 0.58 Rev/Gal
Contour Length 172.0 in. Contour Length 164.0 in. Speed Range 87-174 RPM
Eccentricity 0.163 in. Tube ID 3.750 in. No Load Pressure Loss 145 psi
Major Diameter 2.945 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 2.750 in. Side 1: 8.0 in. Max Recommended Pressure 760 psi 866 psi
Head Length 6.00 in. Side 2: 8.0 in. Torque at Max Rec Pressure 3,367 ft-lbs 3,915 ft-lbs
Weight 388 lbs Weight 387 lbs Stall Pressure 3,020 psi 3,500 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 9,380 ft-lbs 12,240 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.025
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit
0.02
2-US
2-OS
0.005
Reline Lengths (in.) Max 187.0 Min 181.0
Alt. Stator OD (in.) 5.000 0
Alt. Rotor Diameter (in.) 2.605 2.600 0 50 100 150 200 250
Change in Temperature (F)
160
140
180
Mechanical Power (hp)
300 GPM
120
300 GPM
100
160 225 GPM
80
60
150 GPM
140
40
20
225 GPM
120 0
0 200 400 600 800 1,000 1,200 1,400
Speed (rpm)
100
Torque
6,000
60 4,000
Torque (ft-lbs)
3,000
40
2,000
20
1,000
0 0
0 250 500 750 1,000 1,250 0 200 400 600 800 1,000 1,200 1,400
Differential Pressure (psi) Differential Pressure (psi)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 241
Power Section ERT Spec (Imperial Units) 500ERTcr6780
500ERTcr6780
5”
5" 6:7
6:7 Lobes
Lobes88Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 233.5 in. Overall Length 246.0 in. Flow Range 150-350 GPM
Avg. Diameter 2.634 in. Tube OD 5 in. Rev per Unit Volume 0.80 Rev/Gal
Contour Length 226.7 in. Contour Length 227.5 in. Speed Range 120-280 RPM
Eccentricity 0.192 in. Tube ID 4.000 in. No Load Pressure Loss 135 psi
Major Diameter 3.018 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 2.850 in. Side 1: 7.5 in. Max Recommended Pressure 1,600 psi 1,824 psi
Head Length 6.80 in. Side 2: 11.0 in. Torque at Max Rec Pressure 4,924 ft-lbs 5,713 ft-lbs
Weight 365 lbs Weight 546 lbs Stall Pressure 5,750 psi 6,640 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 13,790 ft-lbs 17,220 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.03
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit 0.025
2-US
350
350 GPM
250
250
200 250 GPM
150
150
Torque
8,000
5,000
4,000
50 3,000
2,000
1,000
0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500 2,750 0 500 1,000 1,500 2,000 2,500 3,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 242
Power Section ERT Spec (Imperial Units) 500ERTcr7850
500ERTcr7850
5”
5" 7:8
7:8 Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 186.0 in. Overall Length 194.0 in. Flow Range 150-300 GPM
Avg. Diameter 2.699 in. Tube OD 5 in. Rev per Unit Volume 0.62 Rev/Gal
Contour Length 180.0 in. Contour Length 164.0 in. Speed Range 93-186 RPM
Eccentricity 0.171 in. Tube ID 3.900 in. No Load Pressure Loss 155 psi
Major Diameter 3.041 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 2.750 in. Side 1: 15.0 in. Max Recommended Pressure 1,000 psi 1,140 psi
Head Length 6.00 in. Side 2: 15.0 in. Torque at Max Rec Pressure 3,886 ft-lbs 4,516 ft-lbs
Weight 312 lbs Weight 350 lbs Stall Pressure 4,000 psi 4,850 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 11,240 ft-lbs 14,660 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.025
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit
0.02
2-US
2-OS
0.005
Reline Lengths (in.) Max 194.0 Min 188.0
Alt. Stator OD (in.) 0
Alt. Rotor Diameter (in.) 0 50 100 150 200 250
Change in Temperature (F)
180
300 GPM
140
120
225 GPM
160 100
80
150 GPM
60
140
40
225 GPM
20
120 0
0 200 400 600 800 1,000 1,200 1,400 1,600
Speed (rpm)
100
Torque
7,000
150 GPM
80 Max DP for reliable operation will vary based
6,000 on operational conditions. Refer to ERT
Operational Guidelines for guidance.
5,000
60
Torque (ft-lbs)
4,000
40
3,000
2,000
20
1,000
0 0
0 250 500 750 1,000 1,250 1,500 1,750 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 243
Power Section ERT Spec (Imperial Units) 650ERT6722
650ERT6722
6.5” 6:7
6.5" 6:7 Lobes
Lobes2.2
2.2Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 172.5 in. Overall Length 197.0 in. Flow Range 250-500 GPM
Avg. Diameter 3.265 in. Tube OD 6.5 in. Rev per Unit Volume 0.22 Rev/Gal
Contour Length 164.5 in. Contour Length 161.5 in. Speed Range 55-110 RPM
Eccentricity 0.250 in. Tube ID 5.000 in. No Load Pressure Loss 140 psi
Major Diameter 3.765 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 4.500 in. Side 1: 10.5 in. Max Recommended Pressure 440 psi 502 psi
Head Length 8.00 in. Side 2: 25.0 in. Torque at Max Rec Pressure 5,454 ft-lbs 6,417 ft-lbs
Weight 408 lbs Weight 905 lbs Stall Pressure 1,800 psi 2,225 psi
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 11,650 ft-lbs 16,950 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.035
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit 0.03
2-US
160
140
Mechanical Power (hp)
60 250 GPM
40
80
375 GPM 20
0
0 100 200 300 400 500 600 700
Speed (rpm)
60
Torque
9,000
250 GPM
Max DP for reliable operation will vary based
8,000
on operational conditions. Refer to ERT
Operational Guidelines for guidance.
40 7,000
6,000
Torque (ft-lbs)
5,000
4,000
20
3,000
2,000
1,000
0 0
0 250 500 750 0 100 200 300 400 500 600 700
Differential Pressure (psi) Differential Pressure (psi)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 244
Power Section ERT Spec (Imperial Units) 650ERT6727
650ERT6727
6.5” 6:7
6.5" 6:7 Lobes
Lobes2.7
2.7Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 205.5 in. Overall Length 230.0 in. Flow Range 250-500 GPM
Avg. Diameter 3.265 in. Tube OD 6.5 in. Rev per Unit Volume 0.22 Rev/Gal
Contour Length 197.5 in. Contour Length 194.5 in. Speed Range 55-112 RPM
Eccentricity 0.250 in. Tube ID 5.000 in. No Load Pressure Loss 150 psi
Major Diameter 3.765 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 4.750 in. Side 1: 10.5 in. Max Recommended Pressure 540 psi 616 psi
Head Length 8.00 in. Side 2: 25.0 in. Torque at Max Rec Pressure 6,877 ft-lbs 8,100 ft-lbs
Weight 499 lbs Weight 1075 lbs Stall Pressure 2,125 psi 2,700 psi
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 14,180 ft-lbs 20,800 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.035
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit 0.03
2-US
200
500 GPM
Mechanical Power (hp)
500 GPM
100 150
375 GPM
100
250 GPM
50
80
375 GPM
0
0 200 400 600 800 1,000
Speed (rpm)
60
Torque
250 GPM 12,000
8,000
Torque (ft-lbs)
6,000
20
4,000
2,000
0 0
0 250 500 750 1,000 0 200 400 600 800 1,000
Differential Pressure (psi) Differential Pressure (psi)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 245
Power Section ERT Spec (Imperial Units) 675ERT6729
675ERT6729
6.75” 6:7
6.75" 6:7 Lobes 2.9
2.9Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 177.0 in. Overall Length 202.0 in. Flow Range 300-650 GPM
Avg. Diameter 3.673 in. Tube OD 6.75 in. Rev per Unit Volume 0.22 Rev/Gal
Contour Length 169.0 in. Contour Length 166.5 in. Speed Range 66-143 RPM
Eccentricity 0.272 in. Tube ID 5.500 in. No Load Pressure Loss 210 psi
Major Diameter 4.217 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 4.127 in. Side 1: 10.5 in. Max Recommended Pressure 580 psi 661 psi
Head Length 8.00 in. Side 2: 25.0 in. Torque at Max Rec Pressure 6,689 ft-lbs 7,809 ft-lbs
Weight 544 lbs Weight 766 lbs Stall Pressure 2,250 psi 2,650 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 17,170 ft-lbs 22,280 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.035
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit 0.03
2-US
140
100
120
300 GPM
50
100
475 GPM 0
0 200 400 600 800 1,000
Speed (rpm)
80
Torque
12,000
8,000
Torque (ft-lbs)
40
6,000
4,000
20
2,000
0 0
0 250 500 750 1,000 0 200 400 600 800 1,000
Differential Pressure (psi) Differential Pressure (psi)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 246
Power Section ERT Spec (Imperial Units) 675ERT6731
675ERT6731
6.75” 6:7
6.75" 6:7 Lobes 3.1
3.1Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 116.5 in. Overall Length 127.8 in. Flow Range 300-650 GPM
Avg. Diameter 3.648 in. Tube OD 6.75 in. Rev per Unit Volume 0.37 Rev/Gal
Contour Length 110.0 in. Contour Length 110.0 in. Speed Range 110-240 RPM
Eccentricity 0.279 in. Tube ID 5.500 in. No Load Pressure Loss 125 psi
Major Diameter 4.206 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 4.000 in. Side 1: 10.5 in. Max Recommended Pressure 620 psi 707 psi
Head Length 6.50 in. Side 2: 7.3 in. Torque at Max Rec Pressure 4,827 ft-lbs 5,631 ft-lbs
Weight 347 lbs Weight 584 lbs Stall Pressure 2,250 psi 2,700 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 12,350 ft-lbs 16,220 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.035
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit 0.03
2-US
300
Mechanical Power (hp)
250 200
475 GPM
650 GPM 150
100
300 GPM
200
50
0
0 200 400 600 800 1,000
Speed (rpm)
150
Torque
8,000
5,000
4,000
50 3,000
2,000
1,000
0 0
0 250 500 750 1,000 0 200 400 600 800 1,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 247
Power Section ERT Spec (Imperial Units) 675ERT6748
675ERT6748
6.75” 6:7
6.75" 6:7 Lobes 4.8
4.8Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 177.0 in. Overall Length 202.0 in. Flow Range 300-650 GPM
Avg. Diameter 3.648 in. Tube OD 6.75 in. Rev per Unit Volume 0.37 Rev/Gal
Contour Length 169.0 in. Contour Length 166.5 in. Speed Range 110-240 RPM
Eccentricity 0.279 in. Tube ID 5.500 in. No Load Pressure Loss 135 psi
Major Diameter 4.206 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 4.750 in. Side 1: 10.5 in. Max Recommended Pressure 960 psi 1,094 psi
Head Length 8.00 in. Side 2: 25.0 in. Torque at Max Rec Pressure 6,592 ft-lbs 7,624 ft-lbs
Weight 530 lbs Weight 885 lbs Stall Pressure 3,450 psi 4,110 psi
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 19,300 ft-lbs 24,330 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.035
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit 0.03
2-US
400
350
650 GPM
Mechanical Power (hp)
300
250
250
475 GPM
200
650 GPM
150
300 GPM
100
200
50
0
0 200 400 600 800 1,000 1,200 1,400 1,600
Speed (rpm)
150
Torque
12,000
8,000
Torque (ft-lbs)
6,000
50
4,000
2,000
0 0
0 250 500 750 1,000 1,250 1,500 1,750 0 200 400 600 800 1,000 1,200 1,400 1,600
Differential Pressure (psi) Differential Pressure (psi)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 248
Power Section ERT Spec (Imperial Units) 675ERTcr4570
675ERTcr4570
6.75”4:5
6.75" 4:5Lobes
Lobes77Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 202.5 in. Overall Length 210.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.510 in. Tube OD 6.75 in. Rev per Unit Volume 0.50 Rev/Gal
Contour Length 195.5 in. Contour Length 195.0 in. Speed Range 150-300 RPM
Eccentricity 0.355 in. Tube ID 5.500 in. No Load Pressure Loss 150 psi
Major Diameter 4.220 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 4.000 in. Side 1: 7.5 in. Max Recommended Pressure 1,400 psi 1,596 psi
Head Length 7.00 in. Side 2: 7.5 in. Torque at Max Rec Pressure 7,506 ft-lbs 8,752 ft-lbs
Weight 579 lbs Weight 618 lbs Stall Pressure 3,650 psi 3,850 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 14,740 ft-lbs 18,600 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.03
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit 0.025
2-US
600
Mechanical Power (hp)
500
600 GPM
300
450 GPM
300
100
450 GPM 0
200 0 500 1,000 1,500 2,000 2,500
Speed (rpm)
Torque
14,000
150
10,000
100
Torque (ft-lbs)
8,000
6,000
50
4,000
2,000
0 0
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500 0 500 1,000 1,500 2,000 2,500
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 249
Power Section ERT Spec (Imperial Units) 675ERTcr6750
675ERTcr6750
6.75”6:7
6.75" 6:7Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 194.0 in. Overall Length 200.0 in. Flow Range 300-600 GPM
Avg. Diameter 3.740 in. Tube OD 6.75 in. Rev per Unit Volume 0.28 Rev/Gal
Contour Length 186.3 in. Contour Length 185.5 in. Speed Range 84-168 RPM
Eccentricity 0.288 in. Tube ID 5.500 in. No Load Pressure Loss 135 psi
Major Diameter 4.316 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 4.000 in. Side 1: 7.3 in. Max Recommended Pressure 1,000 psi 1,140 psi
Head Length 7.67 in. Side 2: 7.3 in. Torque at Max Rec Pressure 9,397 ft-lbs 10,925 ft-lbs
Weight 602 lbs Weight 745 lbs Stall Pressure 2,885 psi 3,300 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 21,550 ft-lbs 27,210 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.03
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit 0.025
2-US
400
350
600 GPM
Mechanical Power (hp)
250
450 GPM
140 200
150
300 GPM
100
120 450 GPM
50
0
0 200 400 600 800 1,000 1,200 1,400 1,600
100
Speed (rpm)
Torque
80 16,000
300 GPM
Max DP for reliable operation will vary based
14,000 on operational conditions. Refer to ERT
Operational Guidelines for guidance.
60 12,000
Torque (ft-lbs)
10,000
40 8,000
6,000
20 4,000
2,000
0 0
0 250 500 750 1,000 1,250 1,500 1,750 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 250
Power Section ERT Spec (Imperial Units) 675ERTcr7830
675ERTcr7830
6.75”7:8
6.75" 7:8Lobes
Lobes33Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 118.5 in. Overall Length 125.0 in. Flow Range 300-600 GPM
Avg. Diameter 4.008 in. Tube OD 6.75 in. Rev per Unit Volume 0.28 Rev/Gal
Contour Length 111.3 in. Contour Length 110.5 in. Speed Range 84-168 RPM
Eccentricity 0.256 in. Tube ID 5.500 in. No Load Pressure Loss 125 psi
Major Diameter 4.520 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 4.000 in. Side 1: 7.3 in. Max Recommended Pressure 600 psi 684 psi
Head Length 7.16 in. Side 2: 7.3 in. Torque at Max Rec Pressure 5,668 ft-lbs 6,582 ft-lbs
Weight 433 lbs Weight 466 lbs Stall Pressure 2,115 psi 2,450 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 14,950 ft-lbs 19,630 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.025
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit
0.02
2-US
2-OS
0.005
Reline Lengths (in.) Max 125.0 Min 119.0
Alt. Stator OD (in.) 0
Alt. Rotor Diameter (in.) 0 50 100 150 200 250
Change in Temperature (F)
250
600 GPM
Mechanical Power (hp)
160
200 600 GPM
150
140 450 GPM
100
300 GPM
120 50
450 GPM
0
0 200 400 600 800 1,000
100
Speed (rpm)
Torque
80 9,000
300 GPM
Max DP for reliable operation will vary based
8,000
on operational conditions. Refer to ERT
Operational Guidelines for guidance.
60 7,000
6,000
Torque (ft-lbs)
5,000
40
4,000
3,000
20
2,000
1,000
0 0
0 250 500 750 1,000 0 200 400 600 800 1,000
Differential Pressure (psi) Differential Pressure (psi)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 251
Power Section ERT Spec (Imperial Units) 675ERTcr7850
675ERTcr7850
6.75”7:8
6.75" 7:8Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 187.0 in. Overall Length 194.5 in. Flow Range 300-600 GPM
Avg. Diameter 4.008 in. Tube OD 6.75 in. Rev per Unit Volume 0.28 Rev/Gal
Contour Length 179.6 in. Contour Length 180.0 in. Speed Range 84-168 RPM
Eccentricity 0.256 in. Tube ID 5.500 in. No Load Pressure Loss 160 psi
Major Diameter 4.520 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 4.000 in. Side 1: 7.3 in. Max Recommended Pressure 1,000 psi 1,140 psi
Head Length 7.40 in. Side 2: 7.3 in. Torque at Max Rec Pressure 9,496 ft-lbs 11,014 ft-lbs
Weight 703 lbs Weight 725 lbs Stall Pressure 3,100 psi 3,750 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 24,540 ft-lbs 30,290 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.025
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit
0.02
US
2-OS
0.005
Reline Lengths (in.) Max 194.5 Min 188.5
Alt. Stator OD (in.) 0
Alt. Rotor Diameter (in.) 0 50 100 150 200 250
Change in Temperature (F)
400
350
600 GPM
Mechanical Power (hp)
250
450 GPM
140 200
150
300 GPM
100
120
450 GPM
50
0
0 200 400 600 800 1,000 1,200 1,400 1,600
100
Speed (rpm)
Torque
80 16,000
300 GPM
Max DP for reliable operation will vary based
14,000 on operational conditions. Refer to ERT
Operational Guidelines for guidance.
60 12,000
Torque (ft-lbs)
10,000
40 8,000
6,000
20 4,000
2,000
0 0
0 250 500 750 1,000 1,250 1,500 1,750 0 200 400 600 800 1,000 1,200 1,400 1,600
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 252
Power Section ERT Spec (Imperial Units) 800ERT5652
800ERT5652
8”
8"5:6
5:6Lobes
Lobes5.25.2
Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 228.0 in. Overall Length 240.0 in. Flow Range 300-900 GPM
Avg. Diameter 3.975 in. Tube OD 8 in. Rev per Unit Volume 0.24 Rev/Gal
Contour Length 221.0 in. Contour Length 220.0 in. Speed Range 71-215 RPM
Eccentricity 0.360 in. Tube ID 6.250 in. No Load Pressure Loss 100 psi
Major Diameter 4.695 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 4.750 in. Side 1: 10.0 in. Max Recommended Pressure 1,040 psi 1,186 psi
Head Length 7.00 in. Side 2: 10.0 in. Torque at Max Rec Pressure 11,712 ft-lbs 13,609 ft-lbs
Weight 810 lbs Weight 1700 lbs Stall Pressure 3,000 psi 3,450 psi
Thread Form 3 1/2" IF or Reg Material Alloy Steel Stall Torque 27,100 ft-lbs 34,175 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.04
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit 0.035
2-US 0.03
700
600
Mechanical Power (hp)
900 GPM
500
900 GPM
200 400
600 GPM
300
200
300 GPM
100
150 0
0 500 1,000 1,500 2,000
Speed (rpm)
Torque
20,000
14,000
Torque (ft-lbs)
12,000
300 GPM
10,000
50
8,000
6,000
4,000
2,000
0 0
0 250 500 750 1,000 1,250 1,500 1,750 0 500 1,000 1,500 2,000
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 253
Power Section ERT Spec (Imperial Units) 825ERTcr7840
825ERTcr7840
8.25”7:8
8.25" 7:8Lobes
Lobes44Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 196.2 in. Overall Length 212.3 in. Flow Range 300-900 GPM
Avg. Diameter 4.600 in. Tube OD 8.25 in. Rev per Unit Volume 0.16 Rev/Gal
Contour Length 188.2 in. Contour Length 187.3 in. Speed Range 49-146 RPM
Eccentricity 0.293 in. Tube ID 6.440 in. No Load Pressure Loss 160 psi
Major Diameter 5.186 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 4.750 in. Side 1: 13.0 in. Max Recommended Pressure 800 psi 912 psi
Head Length 8.00 in. Side 2: 13.0 in. Torque at Max Rec Pressure 13,137 ft-lbs 15,217 ft-lbs
Weight 950 lbs Weight 1346 lbs Stall Pressure 2,685 psi 3,200 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 35,740 ft-lbs 43,000 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.035
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit 0.03
2-US
500
Mechanical Power (hp)
300
600 GPM
120
200
100
0
0 200 400 600 800 1,000 1,200 1,400
600 GPM
Speed (rpm)
80
Torque
25,000
10,000
20
5,000
0 0
0 250 500 750 1,000 1,250 1,500 0 200 400 600 800 1,000 1,200 1,400
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 254
Power Section ERT Spec (Imperial Units) 962ERT6735
962ERT6735
9.625”6:7
9.625" 6:7Lobes
Lobes 3.5
3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 197.5 in. Overall Length 210.0 in. Flow Range 600-1200 GPM
Avg. Diameter 5.372 in. Tube OD 9.625 in. Rev per Unit Volume 0.10 Rev/Gal
Contour Length 189.5 in. Contour Length 183.0 in. Speed Range 65-125 RPM
Eccentricity 0.412 in. Tube ID 7.850 in. No Load Pressure Loss 100 psi
Major Diameter 6.196 in. Rubber Cut-back UF114 POB-280XT
Head Diameter 5.900 in. Side 1: 14.0 in. Max Recommended Pressure 700 psi 798 psi
Head Length 8.00 in. Side 2: 14.0 in. Torque at Max Rec Pressure 18,576 ft-lbs 21,453 ft-lbs
Weight 1200 lbs Weight 1950 lbs Stall Pressure 2,400 psi 2,750 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 51,425 ft-lbs 65,075 ft-lbs
Stator Minors and Fit (in.) Fit Increase
0.04
UF114 POB 280XT
Size Minor Fit Minor Fit Minor Fit 0.035
2-US 0.03
500
1200 GPM
Mechanical Power (hp)
120 400
1200 GPM
900 GPM
300
100
900 GPM
0
80 0 200 400 600 800 1,000 1,200
Speed (rpm)
Torque
30,000
60
600 GPM Max DP for reliable operation will vary based
on operational conditions. Refer to ERT
25,000 Operational Guidelines for guidance.
40 20,000
Torque (ft-lbs)
15,000
20 10,000
5,000
0 0
0 250 500 750 1,000 1,250 0 200 400 600 800 1,000 1,200
Differential Pressure (psi) Differential Pressure (psi)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 255
Power Section ERT Spec (Metric Units) 475ERT4536
475ERT4536
4.75” 4:5 Lobes
4.75" Lobes 3.6
3.6Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3048 mm Overall Length 3251 mm Flow Range 568-1136 lpm
Avg. Diameter 57.4 mm Tube OD 120.7 mm Rev per Unit Volume 0.28 Rev/liter
Contour Length 2896 mm Contour Length 2845 mm Speed Range 160-320 RPM
Eccentricity 6.4 mm Tube ID 95.25 mm No Load Pressure Loss 862 kPa
Major Diameter 70.1 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 69.9 mm Side 1: 203.2 mm Max Recommended Pressure 4,964 kPa 5,659 kPa
Head Length 152.4 mm Side 2: 203.2 mm Torque at Max Rec Pressure 2,880 Nm 3,359 Nm
Weight 62.6 kg Weight 145.1 kg Stall Pressure 20,512 kPa 21,718 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 7,376 Nm 9,735 Nm
OS 0.2
2-OS
Reline Lengths (mm) Max 3251 Min 3099 0.1
120
1136 lpm
Mechanical Power (Kw)
60
568 lpm
250 40
20
852 lpm
0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
200
Differential Pressure (kPa)
Speed (rpm)
Torque
150 5,000
568 lpm
4,500 Max DP for reliable operation will vary based
on operational conditions. Refer to ERT
4,000 Operational Guidelines for guidance.
3,500
100
Torque (Nm)
3,000
2,500
2,000
50
1,500
1,000
500
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 256
Power Section ERT Spec (Metric Units) 475ERT4554
475ERT4554
4.75” 4:5 Lobes
4.75" Lobes 5.4
5.4Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4483 mm Overall Length 5080 mm Flow Range 568-1136 lpm
Avg. Diameter 57.4 mm Tube OD 120.7 mm Rev per Unit Volume 0.28 Rev/liter
Contour Length 4331 mm Contour Length 4267 mm Speed Range 160-320 RPM
Eccentricity 6.4 mm Tube ID 95.25 mm No Load Pressure Loss 1207 kPa
Major Diameter 70.1 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 80.0 mm Side 1: 203.2 mm Max Recommended Pressure 7,446 kPa 8,489 kPa
Head Length 152.4 mm Side 2: 609.6 mm Torque at Max Rec Pressure 4,245 Nm 4,942 Nm
Weight 92.5 kg Weight 226.8 kg Stall Pressure 23,442 kPa 26,545 kPa
Thread Form 2 7/8" API PAC Material Alloy Steel Stall Torque 9,667 Nm 12,270 Nm
OS 0.2
2-OS
Reline Lengths (mm) Max 5080 Min 4928 0.1
180
160
1136 lpm
Mechanical Power (Kw)
80
60 568 lpm
250
40
852 lpm 20
0
0 2,000 4,000 6,000 8,000 10,000 12,000
200
Differential Pressure (kPa)
Speed (rpm)
Torque
150 7,000
568 lpm
Max DP for reliable operation will vary based
6,000 on operational conditions. Refer to ERT
Operational Guidelines for guidance.
5,000
100
Torque (Nm)
4,000
3,000
50
2,000
1,000
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 257
Power Section ERT Spec (Metric Units) 475ERT6725
475ERT6725
4.75” 6:7 Lobes
4.75" Lobes 2.5
2.5Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4013 mm Overall Length 4623 mm Flow Range 473-1230 lpm
Avg. Diameter 64.4 mm Tube OD 120.7 mm Rev per Unit Volume 0.12 Rev/liter
Contour Length 3861 mm Contour Length 3810 mm Speed Range 55-145 RPM
Eccentricity 4.6 mm Tube ID 95.25 mm No Load Pressure Loss 1310 kPa
Major Diameter 73.6 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 80.0 mm Side 1: 203.2 mm Max Recommended Pressure 3,447 kPa 3,930 kPa
Head Length 152.4 mm Side 2: 609.6 mm Torque at Max Rec Pressure 3,781 Nm 4,399 Nm
Weight 86.6 kg Weight 171.9 kg Stall Pressure 14,479 kPa 16,547 kPa
Thread Form 2 3/8" PAC Material Alloy Steel Stall Torque 10,643 Nm 13,965 Nm
OS 0.2
2-OS
Reline Lengths (mm) Max 4623 Min 4470 0.1
80
70
Mechanical Power (Kw)
1230 lpm
140 1230 lpm
60
50
852 lpm
40
120
30
20 473 lpm
10
100
0
852 lpm 0 1,000 2,000 3,000 4,000 5,000 6,000
80
Torque
6,000
473 lpm
4,000
Torque (Nm)
40
3,000
2,000
20
1,000
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 258
Power Section ERT Spec (Metric Units) 475ERTcr7838
475ERT7838
4.75” 7:8 Lobes
4.75" Lobes 3.8
3.8Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4521 mm Overall Length 4750 mm Flow Range 568-1136 lpm
Avg. Diameter 66.5 mm Tube OD 120.7 mm Rev per Unit Volume 0.15 Rev/liter
Contour Length 4369 mm Contour Length 4166 mm Speed Range 87-174 RPM
Eccentricity 4.1 mm Tube ID 95.25 mm No Load Pressure Loss 1000 kPa
Major Diameter 74.8 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 69.9 mm Side 1: 203.2 mm Max Recommended Pressure 5,240 kPa 5,974 kPa
Head Length 152.4 mm Side 2: 203.2 mm Torque at Max Rec Pressure 4,566 Nm 5,309 Nm
Weight 176.0 kg Weight 175.5 kg Stall Pressure 20,822 kPa 24,132 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 12,718 Nm 16,595 Nm
2-US
100
1136 lpm
Mechanical Power (Kw)
180
80
1136 lpm 852 lpm
160 60
40 568 lpm
140
20
852 lpm
120 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Differential Pressure (kPa)
Speed (rpm)
100
Torque
8,000
4,000
40
3,000
20 2,000
1,000
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 259
Power Section ERT Spec (Metric Units) 500ERTcr6780
500ERTcr6780
5”
5" 6:7
6:7Lobes
Lobes88Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5931 mm Overall Length 6248 mm Flow Range 568-1325 lpm
Avg. Diameter 66.9 mm Tube OD 127.0 mm Rev per Unit Volume 0.21 Rev/liter
Contour Length 5758 mm Contour Length 5779 mm Speed Range 120-280 RPM
Eccentricity 4.9 mm Tube ID 101.60 mm No Load Pressure Loss 931 kPa
Major Diameter 76.7 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 72.4 mm Side 1: 190.5 mm Max Recommended Pressure 11,032 kPa 12,576 kPa
Head Length 172.7 mm Side 2: 279.4 mm Torque at Max Rec Pressure 6,676 Nm 7,746 Nm
Weight 165.6 kg Weight 247.7 kg Stall Pressure 39,645 kPa 45,781 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 18,697 Nm 23,347 Nm
2-US
250
Mechanical Power (Kw)
100
568 lpm
200 50
946 lpm
0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 18,000
Differential Pressure (kPa)
Speed (rpm)
150
Torque
12,000
8,000
Torque (Nm)
6,000
50
4,000
2,000
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 18,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 18,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 260
Power Section ERT Spec (Metric Units) 500ERTcr7850
500ERTcr7850
5”
5" 7:8
7:8Lobes
Lobes55Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4724 mm Overall Length 4928 mm Flow Range 568-1136 lpm
Avg. Diameter 68.6 mm Tube OD 127.0 mm Rev per Unit Volume 0.16 Rev/liter
Contour Length 4572 mm Contour Length 4166 mm Speed Range 93-186 RPM
Eccentricity 4.3 mm Tube ID 99.06 mm No Load Pressure Loss 1069 kPa
Major Diameter 77.2 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 69.9 mm Side 1: 381.0 mm Max Recommended Pressure 6,895 kPa 7,860 kPa
Head Length 152.4 mm Side 2: 381.0 mm Torque at Max Rec Pressure 5,268 Nm 6,123 Nm
Weight 141.5 kg Weight 158.8 kg Stall Pressure 27,579 kPa 33,440 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 15,239 Nm 19,876 Nm
OS 0.2
2-OS
Reline Lengths (mm) Max 4928 Min 4775 0.1
140
120
Mechanical Power (Kw)
100
852 lpm
160 80
60
568 lpm
140 40
852 lpm 20
120 0
0 2,000 4,000 6,000 8,000 10,000 12,000
100
Torque
568 lpm 9,000
60
6,000
Torque (Nm)
5,000
40 4,000
3,000
20 2,000
1,000
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 261
Power Section ERT Spec (Metric Units) 650ERT6722
650ERT6722
6.5”
6.5" 6:7
6:7Lobes
Lobes2.2
2.2Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4382 mm Overall Length 5004 mm Flow Range 946-1893 lpm
Avg. Diameter 82.9 mm Tube OD 165.1 mm Rev per Unit Volume 0.06 Rev/liter
Contour Length 4178 mm Contour Length 4102 mm Speed Range 55-110 RPM
Eccentricity 6.4 mm Tube ID 127.00 mm No Load Pressure Loss 965 kPa
Major Diameter 95.6 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 114.3 mm Side 1: 266.7 mm Max Recommended Pressure 3,034 kPa 3,458 kPa
Head Length 203.2 mm Side 2: 635.0 mm Torque at Max Rec Pressure 7,395 Nm 8,700 Nm
Weight 185.1 kg Weight 410.5 kg Stall Pressure 12,411 kPa 15,341 kPa
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 15,795 Nm 22,981 Nm
120
Mechanical Power (Kw)
100 80
1420 lpm
60
40 946 lpm
80 20
1420 lpm
0
0 1,000 2,000 3,000 4,000 5,000
60
Torque
12,000
946 lpm
Max DP for reliable operation will vary based
on operational conditions. Refer to ERT
10,000 Operational Guidelines for guidance.
40
8,000
Torque (Nm)
6,000
20
4,000
2,000
0 0
0 1,000 2,000 3,000 4,000 5,000 0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 262
Power Section ERT Spec (Metric Units) 650ERT6727
650ERT6727
6.5”
6.5" 6:7
6:7Lobes
Lobes2.7
2.7Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5220 mm Overall Length 5842 mm Flow Range 946-1893 lpm
Avg. Diameter 82.9 mm Tube OD 165.1 mm Rev per Unit Volume 0.06 Rev/liter
Contour Length 5017 mm Contour Length 4940 mm Speed Range 55-112 RPM
Eccentricity 6.4 mm Tube ID 127.00 mm No Load Pressure Loss 1034 kPa
Major Diameter 95.6 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 120.7 mm Side 1: 266.7 mm Max Recommended Pressure 3,723 kPa 4,244 kPa
Head Length 203.2 mm Side 2: 635.0 mm Torque at Max Rec Pressure 9,323 Nm 10,982 Nm
Weight 226.3 kg Weight 487.6 kg Stall Pressure 14,651 kPa 18,616 kPa
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 19,225 Nm 28,201 Nm
140
1893 lpm
120
Mechanical Power (Kw)
1893 lpm
100
100 1420 lpm
80
60
946 lpm
40
80
1420 lpm 20
0
0 1,000 2,000 3,000 4,000 5,000 6,000
60
Torque
946 lpm 16,000
10,000
Torque (Nm)
8,000
20 6,000
4,000
2,000
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 0 1,000 2,000 3,000 4,000 5,000 6,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 263
Power Section ERT Spec (Metric Units) 675ERT6729
675ERT6729
6.75” 6:7 Lobes
6.75" Lobes 2.9
2.9Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4496 mm Overall Length 5131 mm Flow Range 1136-2461 lpm
Avg. Diameter 93.3 mm Tube OD 171.5 mm Rev per Unit Volume 0.06 Rev/liter
Contour Length 4293 mm Contour Length 4229 mm Speed Range 66-143 RPM
Eccentricity 6.9 mm Tube ID 139.70 mm No Load Pressure Loss 1448 kPa
Major Diameter 107.1 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 104.8 mm Side 1: 266.7 mm Max Recommended Pressure 3,999 kPa 4,559 kPa
Head Length 203.2 mm Side 2: 635.0 mm Torque at Max Rec Pressure 9,068 Nm 10,587 Nm
Weight 246.8 kg Weight 347.5 kg Stall Pressure 15,513 kPa 18,271 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 23,279 Nm 30,208 Nm
180
160
2461 lpm
Mechanical Power (Kw)
140 140
80
120
60 1136 lpm
40
20
100
1798 lpm 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
80
Torque
14,000
10,000
Torque (Nm)
40 8,000
6,000
20 4,000
2,000
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 264
Power Section ERT Spec (Metric Units) 675ERT6731
675ERT6731
6.75” 6:7 Lobes
6.75" Lobes 3.1
3.1Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 2959 mm Overall Length 3245 mm Flow Range 1136-2461 lpm
Avg. Diameter 92.7 mm Tube OD 171.5 mm Rev per Unit Volume 0.10 Rev/liter
Contour Length 2794 mm Contour Length 2794 mm Speed Range 110-240 RPM
Eccentricity 7.1 mm Tube ID 139.70 mm No Load Pressure Loss 862 kPa
Major Diameter 106.8 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 101.6 mm Side 1: 266.7 mm Max Recommended Pressure 4,275 kPa 4,873 kPa
Head Length 165.1 mm Side 2: 184.2 mm Torque at Max Rec Pressure 6,545 Nm 7,634 Nm
Weight 157.4 kg Weight 264.9 kg Stall Pressure 15,513 kPa 18,616 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 16,744 Nm 21,991 Nm
200
Mechanical Power (Kw)
2461 lpm
250 150
1798 lpm
1136 lpm
50
200
0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
1798 lpm
150
Torque
12,000
8,000
Torque (Nm)
6,000
50
4,000
2,000
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 265
Power Section ERT Spec (Metric Units) 675ERT6748
675ERT6748
6.75” 6:7 Lobes
6.75" Lobes 4.8
4.8Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4496 mm Overall Length 5131 mm Flow Range 1136-2461 lpm
Avg. Diameter 92.7 mm Tube OD 171.5 mm Rev per Unit Volume 0.10 Rev/liter
Contour Length 4293 mm Contour Length 4229 mm Speed Range 110-240 RPM
Eccentricity 7.1 mm Tube ID 139.70 mm No Load Pressure Loss 931 kPa
Major Diameter 106.8 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 120.7 mm Side 1: 266.7 mm Max Recommended Pressure 6,619 kPa 7,546 kPa
Head Length 203.2 mm Side 2: 635.0 mm Torque at Max Rec Pressure 8,937 Nm 10,337 Nm
Weight 240.4 kg Weight 401.4 kg Stall Pressure 23,787 kPa 28,337 kPa
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 26,167 Nm 32,987 Nm
300
Mechanical Power (Kw)
250 200
1798 lpm
2461 lpm 150
200 50
0
0 2,000 4,000 6,000 8,000 10,000 12,000
1798 lpm
150
Torque
16,000
10,000
Torque (Nm)
8,000
50 6,000
4,000
2,000
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 266
Power Section ERT Spec (Metric Units) 675ERTcr4570
675ERTcr4570
6.75”4:5
6.75" 4:5Lobes
Lobes77 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5144 mm Overall Length 5334 mm Flow Range 1136-2271 lpm
Avg. Diameter 89.2 mm Tube OD 171.5 mm Rev per Unit Volume 0.13 Rev/liter
Contour Length 4966 mm Contour Length 4953 mm Speed Range 150-300 RPM
Eccentricity 9.0 mm Tube ID 139.70 mm No Load Pressure Loss 1034 kPa
Major Diameter 107.2 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 101.6 mm Side 1: 190.5 mm Max Recommended Pressure 9,653 kPa 11,004 kPa
Head Length 177.8 mm Side 2: 190.5 mm Torque at Max Rec Pressure 10,177 Nm 11,866 Nm
Weight 262.6 kg Weight 280.3 kg Stall Pressure 25,166 kPa 26,545 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 19,985 Nm 25,218 Nm
2-US
400
300
300
200
50
1703 lpm 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
200
Differential Pressure (kPa)
Speed (rpm)
Torque
150 18,000
100 12,000
Torque (Nm)
10,000
8,000
50 6,000
4,000
2,000
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 267
Power Section ERT Spec (Metric Units) 675ERTcr6750
675ERTcr6750
6.75”6:7
6.75" 6:7Lobes
Lobes55 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4928 mm Overall Length 5080 mm Flow Range 1136-2271 lpm
Avg. Diameter 95.0 mm Tube OD 171.5 mm Rev per Unit Volume 0.07 Rev/liter
Contour Length 4733 mm Contour Length 4712 mm Speed Range 84-168 RPM
Eccentricity 7.3 mm Tube ID 139.70 mm No Load Pressure Loss 931 kPa
Major Diameter 109.6 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 101.6 mm Side 1: 184.2 mm Max Recommended Pressure 6,895 kPa 7,860 kPa
Head Length 194.8 mm Side 2: 184.2 mm Torque at Max Rec Pressure 12,741 Nm 14,812 Nm
Weight 273.1 kg Weight 337.9 kg Stall Pressure 19,889 kPa 22,753 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 29,218 Nm 36,892 Nm
300
Mechanical Power (Kw)
200
1703 lpm
140 150
120 50
1703 lpm
0
0 2,000 4,000 6,000 8,000 10,000 12,000
100
Differential Pressure (kPa)
Speed (rpm)
Torque
80 20,000
1136 lpm
12,000
40 10,000
8,000
6,000
20
4,000
2,000
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 268
Power Section ERT Spec (Metric Units) 675ERTcr7830
675ERTcr6730
6.75”7:8
6.75" 7:8Lobes
Lobes33 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 3010 mm Overall Length 3175 mm Flow Range 1136-2271 lpm
Avg. Diameter 101.8 mm Tube OD 171.5 mm Rev per Unit Volume 0.07 Rev/liter
Contour Length 2828 mm Contour Length 2807 mm Speed Range 84-168 RPM
Eccentricity 6.5 mm Tube ID 139.70 mm No Load Pressure Loss 862 kPa
Major Diameter 114.8 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 101.6 mm Side 1: 184.2 mm Max Recommended Pressure 4,137 kPa 4,716 kPa
Head Length 181.9 mm Side 2: 184.2 mm Torque at Max Rec Pressure 7,685 Nm 8,924 Nm
Weight 196.4 kg Weight 211.4 kg Stall Pressure 14,585 kPa 16,892 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 20,269 Nm 26,615 Nm
OS 0.2
2-OS
Reline Lengths (mm) Max 3175 Min 3023 0.1
180
160
Mechanical Power (Kw)
120
60 1136 lpm
40
120
1703 lpm
20
0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
100
Differential Pressure (kPa)
Speed (rpm)
Torque
80 14,000
1136 lpm
Max DP for reliable operation will vary based
12,000 on operational conditions. Refer to ERT
Operational Guidelines for guidance.
60
10,000
Torque (Nm)
8,000
40
6,000
4,000
20
2,000
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 269
Power Section ERT Spec (Metric Units) 675ERTcr7850
675ERTcr7850
6.75”7:8
6.75" 7:8Lobes
Lobes55 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4750 mm Overall Length 4940 mm Flow Range 1136-2271 lpm
Avg. Diameter 101.8 mm Tube OD 171.5 mm Rev per Unit Volume 0.07 Rev/liter
Contour Length 4562 mm Contour Length 4572 mm Speed Range 84-168 RPM
Eccentricity 6.5 mm Tube ID 139.70 mm No Load Pressure Loss 1103 kPa
Major Diameter 114.8 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 101.6 mm Side 1: 184.2 mm Max Recommended Pressure 6,895 kPa 7,860 kPa
Head Length 188.0 mm Side 2: 184.2 mm Torque at Max Rec Pressure 12,875 Nm 14,933 Nm
Weight 318.9 kg Weight 328.9 kg Stall Pressure 21,374 kPa 25,855 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 33,272 Nm 41,068 Nm
300
Mechanical Power (Kw)
200
1703 lpm
140 150
100
1136 lpm
120 50
1703 lpm
0
0 2,000 4,000 6,000 8,000 10,000 12,000
100
Differential Pressure (kPa)
Speed (rpm)
Torque
80 25,000
1136 lpm
Max DP for reliable operation will vary based
on operational conditions. Refer to ERT
20,000 Operational Guidelines for guidance.
60
Torque (Nm)
15,000
40
10,000
20
5,000
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 270
Power Section ERT Spec (Metric Units) 800ERT5652
800ERT5652
8”8"5:6
5:6Lobes
Lobes5.2 Stages
5.2 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5791 mm Overall Length 6096 mm Flow Range 1136-3407 lpm
Avg. Diameter 101.0 mm Tube OD 203.2 mm Rev per Unit Volume 0.06 Rev/liter
Contour Length 5613 mm Contour Length 5588 mm Speed Range 71-215 RPM
Eccentricity 9.1 mm Tube ID 158.75 mm No Load Pressure Loss 689 kPa
Major Diameter 119.3 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 120.7 mm Side 1: 254.0 mm Max Recommended Pressure 7,171 kPa 8,174 kPa
Head Length 177.8 mm Side 2: 254.0 mm Torque at Max Rec Pressure 15,880 Nm 18,451 Nm
Weight 367.4 kg Weight 771.1 kg Stall Pressure 20,684 kPa 23,787 kPa
Thread Form 3 1/2" IF or Reg Material Alloy Steel Stall Torque 36,743 Nm 46,335 Nm
OS 0.4
0.3
2-OS
0.2
Reline Lengths (mm) Max 6096 Min 5944 0.1
Alt. Stator OD (mm) 0
Alt. Rotor Diameter (mm) 0 20 40 60 80 100 120 140
Change in Temperature (C)
500
Mechanical Power (Kw)
3407 lpm
400
3407 lpm
200 300
2271 lpm
200
150 0
0 2,000 4,000 6,000 8,000 10,000 12,000
Differential Pressure (kPa)
Speed (rpm)
2271 lpm
Torque
30,000
20,000
Torque (Nm)
1136 lpm
15,000
50
10,000
5,000
0 0
0 2,000 4,000 6,000 8,000 10,000 12,000 0 2,000 4,000 6,000 8,000 10,000 12,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 271
Power Section ERT Spec (Metric Units) 825ERTcr7840
825ERTcr7840
8.25”7:8
8.25" 7:8Lobes
Lobes44 Stages
Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 4983 mm Overall Length 5391 mm Flow Range 1136-3407 lpm
Avg. Diameter 116.8 mm Tube OD 209.6 mm Rev per Unit Volume 0.04 Rev/liter
Contour Length 4780 mm Contour Length 4757 mm Speed Range 49-146 RPM
Eccentricity 7.4 mm Tube ID 163.58 mm No Load Pressure Loss 1103 kPa
Major Diameter 131.7 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 120.7 mm Side 1: 330.2 mm Max Recommended Pressure 5,516 kPa 6,288 kPa
Head Length 203.2 mm Side 2: 330.2 mm Torque at Max Rec Pressure 17,811 Nm 20,632 Nm
Weight 430.9 kg Weight 610.5 kg Stall Pressure 18,512 kPa 22,063 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 48,457 Nm 58,300 Nm
OS 0.3
2-OS 0.2
Reline Lengths (mm) Max 5391 Min 5239 0.1
Alt. Stator OD (mm) 0
Alt. Rotor Diameter (mm) 0 20 40 60 80 100 120 140
Change in Temperature (C)
350
3407 lpm
300
Mechanical Power (Kw)
120 150
100
1136 lpm
50
100
0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
2271 lpm
Differential Pressure (kPa)
Speed (rpm)
80
Torque
30,000
20,000
1136 lpm
Torque (Nm)
40
15,000
10,000
20
5,000
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 272
Power Section ERT Spec (Metric Units) 962ERT6735
962ERT6735
9.625” 6:7
9.625" 6:7 Lobes
Lobes 3.5
3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
Overall Length 5017 mm Overall Length 5334 mm Flow Range 2271-4542 lpm
Avg. Diameter 136.4 mm Tube OD 244.5 mm Rev per Unit Volume 0.03 Rev/liter
Contour Length 4813 mm Contour Length 4648 mm Speed Range 65-125 RPM
Eccentricity 10.5 mm Tube ID 199.39 mm No Load Pressure Loss 689 kPa
Major Diameter 157.4 mm Rubber Cut-back UF114 POB-280XT
Head Diameter 149.9 mm Side 1: 355.6 mm Max Recommended Pressure 4,826 kPa 5,502 kPa
Head Length 203.2 mm Side 2: 355.6 mm Torque at Max Rec Pressure 25,186 Nm 29,087 Nm
Weight 544.3 kg Weight 884.5 kg Stall Pressure 16,547 kPa 18,961 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 69,723 Nm 88,230 Nm
400
300
120 4542 lpm
250 3407 lpm
200
50
3407 lpm
0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
80
Differential Pressure (kPa)
Speed (rpm)
Torque
60 40,000
2271 lpm Max DP for reliable operation will vary based
35,000 on operational conditions. Refer to ERT
Operational Guidelines for guidance.
30,000
40
25,000
Torque (Nm)
20,000
15,000
20
10,000
5,000
0 0
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Differential Pressure (kPa) Differential Pressure (kPa)
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.
Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational
Drilling and Intervention
fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life.
Specification data are subject to change without notice. PAGE NO: 273
Drilling and Intervention
WT-PowerSections@nov.com
Richmond: 832-714-3800
Dubai: 01197148110100
This document contains information which is valuable and proprietary to Wellbore Technologies - Drilling and Intervention.
The copyright for this document is owned by Wellbore Technologies - Drilling and Intervention. No part of this document is to be copied,
reproduced, or distributed without the written approval of NOV Wellbore Technologies - Drilling and Intervention.