Professional Documents
Culture Documents
Board Foot Computation
Board Foot Computation
Board Foot- is the unit of measure used in computing volume of lumber. One Board Foot simply means one
square foot by one inch thick or equivalent to 144 cu. inches.
The formula being used in computing board foot is:
txwxL
Board Foot = 12
Where t =thickness in inches
w = width in inches
L = Length in feet
Example:
Compute the board foot of the following lumber: 5 pcs- 2"x6"xl4'
5 x 2 x 6 x l4
Bd. ft. =
12
= 70
The above formula could not be used in finding the board foot of logs.
Instead, the following formula is applied:
(D-4)2 x L
16
Where D = smaller diameter of the logs in inches
L =Length of log in feet
4 and 16 = are slab deduction allowance which are constant in the formula
Example:
Find the net board feet of a log with the smaller diameter of 24 inches and 18 feet long.
Solution:
(24-4)2 x 18 (20)2 x 18
= 450 Bd. Ft.
16 16
CONCRETE
Concrete is an artificial stone made out from the mixture of cement, sand, gravel and water; this is known as
plain concrete. Concrete in which reinforcement is embedded in such a manner that the two materials act
together in resisting forces is called Reinforced Concrete.
PORTLAND CEMENT
The type of cement that is widely used in various small and large construction including roads and highways.
ADMIXTURE
A material other than water; aggregates or Portland cement that is used as an ingredient in concrete added to
the batch immediately before or during mixing.
CONCRETE HOLLOW BLOCKS/CHB
The most widely used masonry material for all types of construction such as walls, partitions, dividers, fences
etc.
CONCRETE PROPORTION (VOLUME METHOD)
Class Mixture Cement in Bag Sand Gravel
40 kg. 50 kg. cu. m. cu. m.
Example:
A concrete hollow block wall has a general dimension of 3.00 meters
high by 4.00 meters long. Determine the number of CHB required constructing the wall.
SOLUTION -1 (By Fundamental Method)
1. Divide the height of the fence by the height of one block.
3.00 = 15 layers
.20
2. Divide the length of the fence by the length of one block
4.00 = 10 pieces
.40
3. Multiply the result of step 1 by step 2
15 x 10 = 150 pieces
SOLUTION - 2 (By the Area Method)
One square meter area requires 12.5 pieces concrete hollow blocks.
Therefore, by multiplying the entire area of the wall by 12.5,
we find the total number of CHB required. Thus,
Butt Joint
This is the simplest but also the weakest wood joint.
Dowel Joint
Are wood or plastic pins placed in matching holes where the two pieces of a joint join.
Rabbet Joint
Is a slot cut at the end or edge of one piece into which the end or edge of a second piece
fits.
Dado Joint
Is a groove cut across the grain of the wood. This type of joint is most appropriate on
making book shelves.
Lap Joint
All lap joints have one thing in common, namely an equal amount of wood is cut from
the two parts to be joined.
Miter Joint
Is an angle joint that hides the end grain of both pieces. The ends of each piece are
usually cut at 45 degrees to form a right angle.
Mortise and Tenon Joint
Are very strong joints found in fine furniture. A mortise is a rectangular hole cut in
wood. A tenon is a projecting piece of wood shaped to fit the mortise.
Finger/Box Joint
A finger joint, also known as a comb or box joint, is a woodworking joint made by cutting a set
of complementary rectangular cuts in two pieces of wood, which are then glued.