Professional Documents
Culture Documents
S. No. Description Unit Value 1.0 System Design Data 1.2 Ac Supply
S. No. Description Unit Value 1.0 System Design Data 1.2 Ac Supply
Client : M/s Tamil Nadu Generation and Distribution Corportion
Ltd. (Tangedco.) Eastern Wing
Contractor : L&T LIMITED (L&T‐ECC MANAPAKKAM)
Projects : Coastal disaster Risk Reduction Project (CDRRP) Over
Head to Under Ground Conversion
Consultant : N _ARC Consulting New Delhi
Specification no. CMKL/835/19‐20 REV. 0 DATE: 17.05.2019
S. No. DESCRIPTION UNIT VALUE
1.0 SYSTEM DESIGN DATA
1.1 DESIGN AMBIENT °C 40
1.2 AC SUPPLY
a) Rated Voltage V 415
b) Rated Frequency Hz 50
c) Voltage Variation (permissible) % +10% to ‐10%
d) Frequency Variation (permissible) % +5% to ‐5%
e) Combined voltage & frequency
variation (sum of absolutes % 10%
permissible)
f) System Fault level & duration kA, Sec. As per drawing 10ka For 1Sec
2.0 APPLICABLE STANDARDS
IEC 60439/IS 8623 Low voltage switchgear & controlgrear assemblies
IEC 60529 Degrees of protection provided by enclosures
IS 60947 Low voltage switchgear & control gear
IS 13703 Low voltage fuses for voltages not exceeding 1000V AC or 1500V
IS 10118 Code practice for selection, installation, and maintenance of
Switchgears and control gear
IS 60898 Electrical accessories – circuit breakers for over protection for
household and similar installations
IS 60079 Explosive atmospheres
IS 2551 Danger notice plates
3.0 SERVICE PILLAR‐S1
3.1 Operational Front Single front
3.2 Type of Execution of modules Fixed
(functional unit)
3.3 Type of installation Floor mounted, Legs at the base
height max 300mm
3.4 Type of sheet steel HR Sheet (Hot Dip Galvanized)
a) Load bearing members mm 3.0 HR sheet (hot dip galvanized)
b) Frames mm 90‐125 microns (tolerance as per
c) Door mm applicable is)
d) Angle iron stand mm 75x75x6mm with hot dip
galvanized.
e) Apron 3.0 HR sheet (hot dip galvanized)
3.6 Cable Entry mm Bottom
3.7 Bus Bar
a) Material Aluminum (E91E grade)
b) Size mm Phase‐ 50x10mm/EQ. cross section
Neutral‐38x6mm/EQ. cross section
c) Conical bushing material Powermat
3.8 Earth Bus bar Material Earthing Stud M10
3.9 Degree of Protection IP‐55 for Outdoor
3.10 Gland Plate Thickness mm 3.0mm Galvanized Steel Sheet
(275GSM) With Knock out Punch for
Suitable Cable
4 REWIREABLE FUSE
a) Rating 100A Rewireable Fuse with 200A
Fuse unit (Fuse base & Fuse Holder)
made of porcelain
b) Make INDOASIAN/PC INDUSTRIES/CMKL