Professional Documents
Culture Documents
Kaise Batera Agm 12v 200ah
Kaise Batera Agm 12v 200ah
The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid
electrolyte is absorbed by separators and plates and thus immobilized. Should the
battery be accidentally overcharged producing hydrogen and oxygen, special one-
way valves allow the gases to escape thus avoiding excessive pressure build-up.
Otherwise, the battery is completely sealed and is, therefore, maintenance-free,
leak proof and usable in any position.
Battery Construction
Component Positive plate Negative plate Container Cover Safety valve Terminal Separator Electrolyte
Raw material Lead dioxide Lead ABS ABS Rubber Copper Fiberglass Sulfuric acid
General Features
Performance Characteristics
Absorbent Glass Mat (AGM) technology
for efficient gas recombination of up to Nominal Voltage 12V
99% and freedom from electrolyte Number of cell 6
maintenance or water adding. Design Life 10 years
Not restricted for air transport-complies
Nominal Capacity 77oF(25oC)
Discharge -20~60oC
Dimensions and Weight Charge -10~60oC
Storage -20~60oC
Length(mm / inch) 522 / 20.55
Max. Discharge Current 77oF(25oC) 1000A(5s)
Width(mm / inch) 238 / 9.37
Height(mm / inch) 218 / 8.58 Short Circuit Current 3300A
Total Height(mm / inch) 223 / 8.78 Charge Methods: Constant Voltage Charge 77oF(25oC)
Approx. Weight(Kg / lbs) 59.1 / 130 Cycle use 2.30-2.35VPC
Maximum charging current 60A
Temperature compensation -30mV/oC
Standby use 2.23-2.27VPC
Temperature compensation -20mV/oC