Professional Documents
Culture Documents
Gypsum Plaster: Product Description Physical Properties
Gypsum Plaster: Product Description Physical Properties
When a wall is constructed with brick or block, it is Bulk Density 770 gram/litre
finished with a coat of plaster that is called plastering.
Plastering has traditionally been done through a process Compressive Strength >5 N/mm2
of sand-cement plastering finished with POP/Putty
Coverage of 35 kg bag
pruning. 26.91 square feet
(13 mm thickness)
Sand cement plastering is a two-stage process and 12 months from manufacture in
involves multiple elements like sand, cement and water, Storage Life
dry and sheltered conditions
which is mixed onsite. This form of plastering is being
slowly replaced by a direct single coat application of CHEMICAL PROPERTIES
gypsum plaster for internal walls. Gypsum plaster is
Particulars IS 2547 Part 1 Typical Value
actually a replacement of two processes i.e. sand
cement plastering & POP/Putty pruning.
FEATURES SO3 (percent by mass) 35, min 47.34
DISCLAIMER
All information given in this data sheet is for general guidance only. VNC reserves the right to change specifications
without prior notice.