Professional Documents
Culture Documents
Rodamientos de Cinta de Rodillos
Rodamientos de Cinta de Rodillos
SKF General Conditions for technical assistance and advice (available at www.skf.com) shall apply to this report.
SKF accepts no variation of any of these conditions unless confirmed in writing by SKF.
Bearing Data
d D C C
0
Input Parameters
F 0.2288 kN
r
Radial load
F 0 kN
a
Axial load
n 214 r/min
i
Rotational speed of the inner ring
Operating temperature 50 °C
Bearing outer ring
η specification method Cleanliness
c classification(recommended)
Result
L >1000000 hour
10mh
SKF rating life
Page 1
a 1.05
SKF
SKF life modification factor a
SKF
κ 1.25
Viscosity ratio
P 0.229 kN
Equivalent dynamic bearing load
η 0.05
c
Factor for contamination level
2
ν 85.7 mm /s
1
Required kinematic viscosity for κ=1
L >1000000 hour
10h
Basic rating life
C/P 41.7
Load ratio
Input Parameters
Result
F 0.1 kN
rm
Minimum radial load
Input Parameters
n 214 r/min
i
Rotational speed of the inner ring
n 214 r/min
e
Rotational speed of the outer ring (only used to calculate the bearing
frequencies)
Page 2
Result
f 3.57 Hz
i
Rotational frequency of the inner ring
f 3.57 Hz
e
Rotational frequency of the outer ring
f 3.57 Hz
c
Rotational frequency of the rolling element and cage assembly
f 0 Hz
r
Rotational frequency of a rolling element about its own axis
f 0 Hz
ip
Over-rolling frequency of one point on the inner ring
f 0 Hz
ep
Over-rolling frequency of one point on the outer ring
f 0 Hz
rp
Over-rolling frequency of one point on a rolling element
1.4 Viscosity
Input Parameters
n 214 r/min
i
Rotational speed of the inner ring
Operating temperature 50 °C
Bearing outer ring
Grease used in the bearing VT307
2
Viscosity at 40 °C 190.0 mm /s
2
Viscosity at 100 °C 15.0 mm /s
Result
2
ν 106.9 mm /s
Lubricant viscosity at operating temperature
2
ν 85.7 mm /s
1
Required viscosity at operating temperature for κ=1
Page 3
2
ν 143.2 mm /s
ref
Required viscosity at 40 °C for κ=1
κ 1.25
Viscosity ratio
Input Parameters
F 0.2288 kN
r
Radial load
F 0 kN
a
Axial load
Result
P 0.229 kN
Equivalent dynamic bearing load
Page 4