The document provides instructions for configuring the antenna, ACU controller, iDirect X3 modem, and LNB for a KNS Z10 MK2 antenna system to connect to the Vinasat 2 satellite. Key steps include inputting tracking and reference details into the ACU, configuring the satellite and DVB tuner parameters, setting the satellite ID to 02, configuring the iDirect X3 modem's IP address and location, and setting the BUC and LNB local oscillator frequencies. Upon completion, the system successfully locked onto and tracked the Vinasat 2 satellite as recorded by the ACU and iMonitor.
The document provides instructions for configuring the antenna, ACU controller, iDirect X3 modem, and LNB for a KNS Z10 MK2 antenna system to connect to the Vinasat 2 satellite. Key steps include inputting tracking and reference details into the ACU, configuring the satellite and DVB tuner parameters, setting the satellite ID to 02, configuring the iDirect X3 modem's IP address and location, and setting the BUC and LNB local oscillator frequencies. Upon completion, the system successfully locked onto and tracked the Vinasat 2 satellite as recorded by the ACU and iMonitor.
The document provides instructions for configuring the antenna, ACU controller, iDirect X3 modem, and LNB for a KNS Z10 MK2 antenna system to connect to the Vinasat 2 satellite. Key steps include inputting tracking and reference details into the ACU, configuring the satellite and DVB tuner parameters, setting the satellite ID to 02, configuring the iDirect X3 modem's IP address and location, and setting the BUC and LNB local oscillator frequencies. Upon completion, the system successfully locked onto and tracked the Vinasat 2 satellite as recorded by the ACU and iMonitor.
2. ACU configuration: We can Config Directly front Panel of ACU controller as following: - Input the details of the searching and tracking references: - Input the parameters of the satellite using the configuration of the ‘DVB Tuner’. Please refer to Figure below: - SET ID satellite for Vinasat 2 Satellite : ID 02 3. iDirect X3 Configuration on iDirect Hub: Modem Type: X3. Serial Number: 207185. Config IP address for Modem iDirect X3 Qos for this remote site: Location for this remote site BUC:
- LO: 12800 MHz
- ODU Tx Oscillator : 10MHz. LNB: - LO: 9750 Mhz. 4. Result of Testing KNS 1m with modem iDirect X3:
ACU Locked the carrier and Tracking to Vinasat 2 satellite: