Professional Documents
Culture Documents
Foam Wiping Technology
Foam Wiping Technology
HAL24999
The foam wiper dart is designed to wipe drillpipe or tubing
string clean of cement, fluids, or debris and can be used to
separate fluids. The dart has a high parting stretch ratio
HAL25001
compared to conventional molded rubber wiper plugs and
darts, which means it can pass through small restrictions
without being damaged. It easily passes through internal Foam Dart After a
Foam Wiper Dart
upset restrictions such as mechanical setting tools, diverters, Design
19,900-ft Displacement
and liner running tools, and through tapered strings. Foam Test Run
wiper darts have been used with most types of drilling and
displacement fluids.
The foam wiper dart was deployed with SSR-II™ plugs third
quarter 2005. Since, the foam dart has been used with
standard SSR® plugs, SSR-II™ plugs, BHKA disconnect
HAL25000
The foam wiper dart is not recommended to use on Standard Floppy Rubber Wiper Dart That Has
cementing work where the dart has to continuously pass Experienced Wrinkling from Being Loaded in
through extremely tight restrictions repeatedly. Tight Restriction
HAL25004
HAL31482
© 2009 Halliburton
HAL25002
Dart
Holding chamber
Airline tube
Ball valve
Air regulator Holding chamber cap
HAL25003
if necessary.
The foam wiper ball is not recommended to use on Various Size Foam Wiper Balls
cementing work where the ball has to continuously pass
through extremely tight restrictions repeatedly.
Features
• Can efficiently wipe combination drillpipe and tubing
strings with various inside diameters
• Used in wells with a temperature range of 40°F (4°C) to
HAL24996
302°F (150°C)
• The wiper ball can be loaded into drillpipe or tubing
connections. Foam Wiper Balls as Packaged for Delivery
• Foam wiper balls have been used with all types of drilling
and displacement fluids.
• Can pass and shred through bit mud nozzle jets if
required. Allows wiping of drillpipe with drill bit on
bottom.
• Special manifold launching systems are available for
rental.
• Several ball sizes available from 3 in. to 8 in. in a variety
of selected wiping range intervals
HAL24998