Professional Documents
Culture Documents
Tam Seal
Tam Seal
Whilst any information and/or specification contained herein is to the best of our knowledge, true and accurate, we always recommend that a trial be carried
out to confirm suitability of the product. Please note regional climatic conditions may cause a variation in the performance of the product. No warranty is given
or implied in connection with any recommendations or suggestions made by us or our representatives, agents or distributors. The information in this data
sheet is effective from the date shown and supersedes all previous data. Please check with your local Normet office to confirm that this is current issue.
General PACKAGING
No visible changes
appearance TamSeal 2200 PVC are delivered on wooden pallets. Every
roll is wrapped in non-transparent polyethylene film, which
Dimensional
≤-3 protects them from UV radiation.
stability (6h, 80°C)
Resistance to Change of tensile
STORAGE
heat strength ≤ - 10
DIN 16726 (7 days, 80°C) TamSeal 2200 PVC should be stored at room temperature
5.13 (min 10°C and max 38°C), kept dry and out of direct
Change of
sunlight. If these conditions are maintained and the
elongation at
≤ - 10 product packaging is unopened, then a shelf life of one
break year can be expected.
(7days,80°C)
Folding at T - 20°C No break of crack TamSeal 2200 PVC rolls should be kept in dry enclosed
space, placed horizontally, no more than three rows in
Burst strength (kPa%) Stress ≥ 6000 kPa
height, in original package.
DIN 61551 Strain ≥ 50 %
Fire resistance HEALTH & SAFETY
E Class
UNI EN ISO 11925-2
TamSeal 2200 PVC should only be used as directed. We
Root resistance
Conform always recommend that the Safety Data Sheet is carefully
UNI CEI/TS 14416
read prior to application of the material. Our
Shear resistance when applied with recommendations for protective equipment should be
bituminous (N/50mm) ≥ 600 strictly adhered to for your personal protection. The Safety
DIN 16726 5.10 data sheet is available upon request from your local
Compressive strength at 200% Normet representative.
strain (N/mm2) ≥4
UNI EN ISO 604
Tensile strength
Retained: MD97%,
Resistance to weathering (%) CD98%
EN 12224 UNI EN ISO 527-3 Elongation at break
retained: MD99%,
CD99%
Product conform to the norm EN 13491 and EN 13967
Whilst any information and/or specification contained herein is to the best of our knowledge, true and accurate, we always recommend that a trial be carried
out to confirm suitability of the product. Please note regional climatic conditions may cause a variation in the performance of the product. No warranty is given
or implied in connection with any recommendations or suggestions made by us or our representatives, agents or distributors. The information in this data
sheet is effective from the date shown and supersedes all previous data. Please check with your local Normet office to confirm that this is current issue.