Professional Documents
Culture Documents
LemonBee Product Manual v2
LemonBee Product Manual v2
LemonBee Product Manual v2
▻ Ultrasonic Sensor
4:1
▻ Extended Cable
Cables (length as per site dimension)
▻ 4-core 7/39 Cable
▻ Cat 5 Cable
Miscellaneous
▻ 220-250 AC to 12V-12A DC Power Adaptor
heat
shrinked ▻ 2mm & 6mmheat shrink tubes
▻ Aluminium strips(2) & cable ties
FLUID MANAGEMENT SYSTEM
Product Manual PAGE 2
Cable Details ▻ Place the 2mm heat shrink tubes over the exposed
(1) Main Controller ßà Sensor joints and heat them with flame
▻ Place the 6mm heat shrink tube over all joints heat with
▻ Main Controller should be connected to sensors via 4- flame
core (7/39) data cables
▻ You can find 4 sets of 4-core data cable protruding from
the main controller unit, one per tank. Similarly, each
sensor shall have a 4-core data cable protruding.
▻ Each of these 4 sets are marked 1, 2, 3 and 4 using
ferrule. These correspond to port numbers in the (2) Main Controller ßà Motor Controller
configuration screen of the LemonBee Mobile App ▻ Main Controller should be connected to motor controller
▻ 4-core (7/39) data cable can be joined with one another via CAT 5 cable
as per instructions given below: ▻ RJ45 socket is provided in main controller & in motor
▻ Insert the 6 mm heat shrink tube to one end of the controller
cable & Insert the 2 mm heat shrink tube to ▻ CAT 5 cables
individual wires on one end can be
▻ Join all 4 wires by twisting the strands with connected to
matching colors one other
through
2 mm tubes
6 mm tube crimping
4-core cable using RJ 45
Jack
FLUID MANAGEMENT SYSTEM
Product Manual PAGE 3
Installation Procedure
Source Monitorable? – Every motor has a source to pump Terms & Conditions
water from. In case of bore motor, the source (bore well) is
not monitorable. In case of sump motor, the sump tank ▻ Warranty is limited to manufacturing defects of the
needs to be monitored to check if the sump tank has product for a period of 1 year from date of purchase
sufficient source to pump water from it. ▻ Claims and damages are limited only to the extent of the
value of product purchased.
Tank Depth – Distance between bottom of the tank and the ▻ Legal jurisdiction for settling any disputes will be limited
sensor (in centimeters) to courts in Chennai.
FLUID MANAGEMENT SYSTEM
Product Manual PAGE 7
Troubleshooting
Issue Tip(s)
LCD Display in Motor Controller is not switching ON ü Check AC power availability in the plug point
ü Check if the DC power input is properly inserted
Mobile App Notification: Motor is switched ON, but is not Check if the motor has power and is running in Manual Mode.
running ü If yes, contact our customer support.
ü If not, use your local electrician to fix the motor connection
Mobile App Notification: Motor is switched ON, but is not Check if the water is available in the source tank or bore well. In
pumping water up case of air locked, seek help from local plumber
Mobile App Notification: Sensor Placement Error Check if the sensor is dislocated under the lid
Mobile App Notification: Sensor Connection Error Check if the cable to sensor is cut or damaged
Erratic values of tank levels Check if the sensor is dislocated under the lid
Erratic ON/OFF of motors ü Check if the RJ45 connection to motor controller is in tact
ü Check if the configuration is proper and logical
In case you face issues that are not listed above, or, if the tips above do not help in resolving the issue, please switch the motors
to manual mode and contact us via email (support@thingksinfomatics.com) or Call (0091 - 94430 36763)