Professional Documents
Culture Documents
Nijhuis Product Sheets Catalog 1
Nijhuis Product Sheets Catalog 1
Nijhuis Product Sheets Catalog 1
1
NFS - Cloth Filters - NDF
Series
Model Length Width Height Weight Power
mm mm mm kg kW
Empty / Full
NDF 100 1600 - 2150 1000 1800 - 1950 345 - 450 0,55
NDF 200 2600 - 3150 1000 1800 - 1950 425 - 625 0,55
NDF 300 3550 - 4100 1000 1800 - 1950 505 - 775 0,55
NDF 400 4500 - 5050 1000 1800 - 1950 585 - 950 0,55
2
NFS - Curved screen - NZB
Primary screening for industrial waste water The unscreened waste water is fed on top of the curved screen
Protection of downstream equipment and flows downwards. Water will flow between the spacings
Prevent blockages in downstream piping and the wedges and leafs the screen.
The curved screen (NZB) can either be integrated in Solids larger than the spacings will be retained on the screening
a total solution or offered as a single product for your surface and will fall down into a collection container.
waste water.
The curved screen design is including:
Advantages & Characteristics Wedge wire sieving plate which will retain particles half the
Completely pre-assembled size of the slot width
Construction of stainless steel Special designed sieving plate to avoid blockages
Standard range or tailor made Distribution plate to direct the waste water including solids over
Easy to maintain the sieving plate
Screen can be covered Optional support, depending on location
Spray cleaning system can be installed
Vibrating version available for special cases
3
NFS - Curved screen - NZB
Series
Type Length Width Height Weight
mm mm mm Empty / Full
4
NCF - Flocculator - PFR
Break emulsions by coagulation The pipe flocculator is designed specially for every specific type
Precipitate metals of waste water because mixing energies and mixing times are
Enlarge separability of flocs by flocculation unique for different waste waters.
Neutralization
Depending on the application the flocculator will be equipped
Advantages & Characteristics with the following:
Design of flocculator based on waste water and Mixing pipes
chemical types used Dosing points
Compact design Sample points
Completely pre-assembled By pass for pH measuring and control device
Construction of PE
HDPE or stainless steel materials on request Nijhuis Water Technology has also a range of dosing equipment
Accurate mixing results in uniform floc growth and chemical make-up equipment available.
No back mixing
No power required for mixing
Minimal chemical consumption
5
NCF - Flocculator - PFR
6
Nijhuis Inline Electrocoagulation Cell (iNEC)
+ -
Anode Cathode
- +
+
-
7
Nijhuis Inline Electrocoagulation Cell (iNEC)
Series
Type Surface Dimensions Hydraulic capacity Power consumption
m2 m m3/hr kW
8
Optiflot - Flotation systems - GDF
9
Optiflot - Flotation systems - GDF
Series
Type Hydraulic capacity Sludge load Lenght Width Height Weight
max. m3/hr m3/hr mm mm mm Empty - Full
10
Optiflot - Flotation systems - IPF
The Optiflot, type IPF can either be integrated in a total The on-built recirculation system & aeration system is
solution or offered as a single product for your waste water. equipped with unique and patented non clogging aeration
devices and will form very fine air bubbles who will support
the separation of particles.
Advantages & Characteristics
Compact built unit with plate pack
The unit is equipped with automatic sediment removal valves
Construction of stainless steel
for removing any settled material. Unit selection is based on
Standard range or tailor made
the type of waste water, the hydraulic and sludge handling
Laminar flow through unit for optimal removal efficiency
capacity.
11
Optiflot - Flotation systems - IPF
Series
Type Hydraulic capacity Sludge load Lenght Width Height Weight Power
max. m3/hr m3/hr mm mm mm Empty - Full kW installed
Unit selection is based on the type of waste water, use of chemicals, the hydraulic and sludge handling capacity, figures in this table are an indication
12
Optiflot - Flotation systems - NPF
13
Optiflot - Flotation systems - NPF
NPF 110 LX 137 1,7 4370 2619 3542 1900 - 17600 7,9
NPF 150 LX 196 3,5 4559 3971 3922 5500 - 32500 11,4
NPF 250 LX 326 5,8 6771 3945 3922 8000 - 56500 15,8
NPF 350 LX 457 8,1 9592 3951 3922 10500 - 80500 16,1
NPF 500 LX 653 11,6 12910 3957 3922 13500 - 110500 ?
NPF 700 LX 914 16,1 17446 3951 3922 18900 - 154700 38,5
NPF 200 HX 259 2,6 5442 2589 4572 3450 - 30400 11,4
NPF 400 HX 518 5,6 6068 3980 4812 6750 - 58750 23,1
NPF 600 HX 776 8,4 8280 4100 4812 10125 - 88125 23,1
NPF 800 HX 1035 11,2 10698 4000 4581 13500 - 117500 38,1
NPF 1000 HX 1294 14 12910 4000 4581 16875 - 150000 38,1
NPF 1200 HX 1553 16,8 15922 4690 4812 20250 - 176500 45,5
Unit selection is based on the type of waste water, use of chemicals, the hydraulic and sludge handling capacity, figures in this table are an indication
NPF 700 LX
14
Bioctor S - Aerobic biological treatment - SBR
15
Bioctor S - Aerobic biological treatment - SBR
Technical description
1. Selector
Selector tank in which bacteria are in contact with BOD (raw influent) in order to give flock building bacteria an advantage
over filamentous bacteria.
2. Nutrient and Phosphor precipitant dosing (if required)
When there is a lack of nutrients in the water these have to be added to create a healthy biomass
For phosphorus removal dosing of a precipitant will be required
3. SBR tank
a. Aeration of biomass/water mixture
b. Denitrification in non aeration periods
c. Settling of the biomass
d. Discharge of treated water
4. Water discharge
The treated water will be discharged from the SBR tank by the floating discharge
5. Sludge return and excess sludge
a. Sludge return flow will be pumped to the selector
b. Excess sludge will be discharged, further dewatering is a possibility
16
NWR - Carbopure
17
NWR - Carbopure
Series
Type Diameter Height Hydraulic capacity Performance
mm mm max. m3/hr Kg COD/day
18
Continuous Sand Filter
19
Continuous Sand Filter
Series
Type Diameter Surface Hydraulic capacity TSS capacity
m m2 m3/hr kg/hr
20
Taurus reactor - Anaerobic digestion systems for manure & co-products
21
Taurus reactor - Anaerobic digestion systems for manure & co-products
Technical description
1. Raw material storage
a. solids materials: silage storage clamp
b. liquid materials: storage tanks
The required storage capacity is depending on the raw materials available for your plant.
2. Digester feeding systems
Solids materials are periodically fed to a bunker where the solid materials are pretreated and mixed before the are automatically
transferred to the digester. Liquid materials are automatically pumped into the digester system.
3. Digester and optional post digester
a. Under anaerobic conditions the feed materials are digested / fermetated to create biogas with around 50-60% methane
and 30-40% carbondioxide. To create an optimal amount of biogas and a stable system, the reactor is designed to
operate at 38°C. The digester tank is equipped with a mixing and heating system.
b. For high loaded systems a post digester can be added to the design. In the post-digester the process continuous and
the additional gas can be extracted.
4. Digestate storage
The fermentation residues from the digester and optional post digester is called digestate. Digestate is a high quality liquid
fertilizer, which can substitute chemical fertilizers.
5. Combined Power and Heat (CHP) unit
A CHP unit is a motor that drives a generator to electricity and heat out of the created biogas. Energy can be used for operating
the biogas plant and can be sent to the public network. The heat will be used to maintain the temperature in digester tanks and
can be distributed for other purposes like heating of greenhouses, living areas, industry.
6. Electricity power supply
For the larger biogas plant the created energy needs to be transformed from 400V to 10,000V before connecting to the public
network. For smaller plants this is not applicable.
7. Upgrading of biogas to natural gas
Instead of point 5 and 6 there is an option to upgrade the biogas to natural gas. Carbon dioxide has to be extracted from the
biogas, before feeding the gas to the public natural gas network.
22
Aecomix - Anaerobic digestion systems for sludge and waste
23
Aecomix - Anaerobic digestion systems for sludge and waste
Technical description
1. Raw material storage and preparation
a. solids materials: storage bunkers or containers
b. liquid materials: storage tanks
c. preparation
The required storage capacity is depending on the raw materials available for your plant. Based on the nature of the raw
materials a preparation step will be required (sterilization, pasteurization, maceration).
2. Digester feeding systems
Solids materials are periodically fed to a bunker where the solid materials are pretreated and mixed before the are
automatically transferred to the digester. Liquid materials are automatically pumped into the digester system.
3. Digester and optional post digester
a. Under anaerobic conditions the feed materials are digested / fermetated to create biogas with around
50-60% methane and 40-50% carbondioxide. To create an optimal amount of biogas and a stable system, the
reactor is designed to operate at 38°C. The digester tank is equipped with a mixing and heating system.
b. For high loaded systems a post digester can be added to the design. In the post-digester the process continuous
and the additional gas can be extracted.
4. Digestate storage
The fermentation residues from the digester and optional post digester is called digestate.
5. Combined Power and Heat (CHP) unit
A CHP unit is a motor that drives a generator to electricity and heat out of the created biogas. Energy can be used for operating
the biogas plant and can be sent to the public network. The heat will be used to maintain the temperature in digester tanks and
can be distributed for other purposes like heating of greenhouses, living areas, industry.
6. Electricity power supply
For the larger biogas plant the created energy needs to be transformed from 400V to 10,000V before connecting to the public
network. For smaller plants this is not applicable.
7. Upgrading of biogas to natural gas
Instead of point 5 and 6 there is an option to upgrade the biogas to natural gas. Carbon dioxide has to be extracted from the
biogas, before feeding the gas to the public natural gas network.
24