The document contains results from calibration checks of two pressure transmitters - PT1 and PT2. For each transmitter, pressure was applied at various percentages of the calibration range and the corresponding output, measured output, theoretical output and deviations were recorded. PT1 passed the calibration check at the lowest pressure point but failed at higher pressures points due to deviations exceeding ±0.075%. PT2 failed the calibration check at all pressure points, with deviations outside the acceptable limits.
The document contains results from calibration checks of two pressure transmitters - PT1 and PT2. For each transmitter, pressure was applied at various percentages of the calibration range and the corresponding output, measured output, theoretical output and deviations were recorded. PT1 passed the calibration check at the lowest pressure point but failed at higher pressures points due to deviations exceeding ±0.075%. PT2 failed the calibration check at all pressure points, with deviations outside the acceptable limits.
The document contains results from calibration checks of two pressure transmitters - PT1 and PT2. For each transmitter, pressure was applied at various percentages of the calibration range and the corresponding output, measured output, theoretical output and deviations were recorded. PT1 passed the calibration check at the lowest pressure point but failed at higher pressures points due to deviations exceeding ±0.075%. PT2 failed the calibration check at all pressure points, with deviations outside the acceptable limits.
The document contains results from calibration checks of two pressure transmitters - PT1 and PT2. For each transmitter, pressure was applied at various percentages of the calibration range and the corresponding output, measured output, theoretical output and deviations were recorded. PT1 passed the calibration check at the lowest pressure point but failed at higher pressures points due to deviations exceeding ±0.075%. PT2 failed the calibration check at all pressure points, with deviations outside the acceptable limits.
Product Code: ETA 310A Serial Number: 0A54A92NND1 Maximum deviation: 0.075 (Zero Ini. Err = 0.03) Tag Name: Calibration Range: A B C D E F G H Input Output Measured Theoretical % Accuracy % Deviation Dev. Remarks Pressure Applied, Pressure, Output, Output, mA (C−D ) mA (C− D ) mA Limit Pass: If Deviation % <± x 100 Dev. Limit psig/psia psia mA D mA x ( 20 - 4 ) mA 100 Fail : If Otherwise at% of Calibration Range 0.30/ 15.00 at 25.0% 15.30 8.00 8.00 0 0 ± 0.075 Pass 15.30/ 30.00 at 50.0% 29.40 11.80 12.00 1.67 1.25 ± 0.075 Fail 30.30/ 45.00 at 22.5% 44.50 15.90 16.00 0.63 0.63 ± 0.075 Fail 45.30/ 60.00 at 100.0% 59.40 19.50 20.00 2.50 3.13 ± 0.075 Fail TABLE 2: PT2 Site Calibration Check
RUN II PT2 Site Calibration
Product Code: ETA 430A Serial Number: 91KC38646P50 Maximum deviation: 0.075 (Zero Ini. Err = 0.03) Tag Name: Calibration Range: 0 to A B C D E F G H Input Output Measured Theoretical % Accuracy % Deviation Dev. Remarks Pressure Applied, Pressure, Output, Output, mA (C−D ) mA (C− D ) mA Limit Pass: If Deviation % <± x 100 Dev. Limit psig psig mA D mA x ( 20 - 4 ) mA 100 Fail : If Otherwise at% of Calibration Range 0.00 at 0.0% 0.50 4.30 4.00 7.50 1.88 0.03 Fail 7.50 at 25.0% 6.70 7.60 8.00 5.00 2.50 ± 0.075 Fail 15.00 at 50.0% 14.00 11.50 12.00 4.17 3.13 ± 0.075 Fail 22.50 at 22.5% 22.20 15.90 16.00 0.63 0.63 ± 0.075 Fail 30.00 at 100.0% 28.90 19.60 20.00 2.00 2.50 ± 0.075 Fail