Professional Documents
Culture Documents
@email: Mohd Zaky Bin Rosnan
@email: Mohd Zaky Bin Rosnan
@email: Mohd Zaky Bin Rosnan
Brief Introduction
COMPUTER APPLICATIONS
Welding Inspection
NDT Inspection Microsoft Word
Mechanical testing Inspection Microsoft Excel
3rd Party Inspection
Technical Welding Supervision NATIONALITY: Malaysian
IC No: 680623-01-5789
Certification
2010 - PCN Number: 307403 LANGUAGES: Bahasa /English
Weld Inspection L-2 Oral – Moderate
Cert Number: F010S3923200 Written – Moderate
Expiry Date: 01/03/2021
2011 - Radiographic Interpretation L-2 ADDRESS:
Cert Number: F011S3625791 No: 15 Lorong Mutiara Bandar Mas
2016 – BGAS CSWIP - Blast Cleaning/ 81900 Kota Tinggi Johor
Preparation Operative Grade 5A
Cert No: 2C4X/534173 CONTACTS:
Painting Operative Grade 5B
Mobile: +6019-7466080
Cert No: 2C4Y/534173
Email Address
2017-CSWIP- 3.1
mohdzaky68@gmail.com
Cert No: 534173 -CO0000861879
zakymohd34@yahoo.com
SUMMARY OF EXPERIENCES
More than 25 years’ experience involving in Supervision, Erection, Coordination, Inspection,
Expediting, Welding Procedure Specification and NDE in the Onshore and Offshore Oil & Gas
Installation, hook-up commissioning and fabrication of Jacket, Module, Topsides, Bridge and
other related activities. Experience including Shop Fabrication, Site Installation and construction
project in welding, NDT, blasting & painting, engineering and Source inspection for Module,
Jacket, Topsides Structure and associated pipe work and pipelines of Oil & Gas Platforms,
FPSO, Turret, Civil Structure Telecommunication Tower, Civil Structure Building, Pressure
Vessels, Piping Systems, Steel Structure, Sub-Sea Equipment, Maintenance of Boiler Repair
Inspection, Pressure Vessel Repair Inspection, Crane Inspection, component HVAC, component
of SILO, Piping Process Repair Inspection, GRE & GRP Pipes & Fittings parts of Manufacturing,
Subsea Production System (SPS) & (SURF) oil and gas in manufacturing Flexible Pipe, Flow
Line, Pipe Jumper, End fitting (Forged) and Umbilical, Wellhead Equipment, Riser, Drilling
Equipment, Thermal Oxidiser (RTO), Ducting, Stack, Heat Exchangers, Hydroelectric
Component, Manifold, Component of Piping, Tanks Storage, Pump Skid, Manufacturing of
Material Plate Rolling Tubular / Cone - Included Blasting, Painting and Marine Fabrication Repair
Inspection. Direct performance of inspection and also in independent monitoring interpretation of
inspection activities. Works to International codes and standards including AWS, ASTM, ISO,
ASME, DNV, BS, ANSI and API.
WORKING EXPERIENCES
And materials.
To perform at witnessing and verification of heat shrink sleeve peel test, salt test, profile
test, blasting and epoxy primer application, polypropylene coated on subsea pipelines.
Review and verification of manufacturing Quality Plan and Inspection Test Plan to ensure
that all the mechanical test and quality inspection is going smoothly.
Witness and verification inspection activities on Profiling, Extrusion, Armoring, Spiraling,
Insulation and End fitting process.
Verification and monitoring control and coordinate equipment/machine calibration
according calibration international standard.
Make sure and establish safety risk assessment and job safety analysis on the quality
control laboratory for each test/machine/chemical.
To perform at witnessing and verification of hydro testing, leak testing, air / foam testing,
compression testing, nitrogen gas test, Welding Procedure Qualification Test, Welding
Procedure Specification, Welder Performance Qualification Test, mechanical testing, load
& pulling testing for webbing sling, chain block or shackle and issuing inspection report
for client reference.
To act on behalf of client or for the assigned job or project (activities involved -
witnessing and verification works as Welding Procedure Qualification Test, Welding
Procedure Specification, Welding Inspection (Before, During and After), welding machine,
parameter and factory accepted testing regarding on production activities, dimensional
and fitting verification, mounting, NDT methods (UT, RI, MPI & DPI) and document
review.
Familiar with Welding Process (SMAW, GTAW & SAW).
Reviewed and endorsed the documentation of (MRB-Manufacturing Record Book) for production
manufacturing
Performing inspection and supervision of the pipeline installation and testing activities
carried out by contractor is in accordance with approved contractors ITB inspection points
and related notifications.
Surveillance of the activities carried out by the contractors to minimize any adverse
impact on the scheduling of the activities.
Ensuring that inspection & test plans are timely basis applied by contractors and that
project requirement as listed in ITB are fulfilled.
Performing the required surveillance (monitor, witness, hold point) on due time as per the
related inspection notification.
Ensuring that the contractors issue all the necessary quality documents, are duly signed
and filed.
Performs assignments independently with instruction as to the general results expected
and with guidance from Project or Construction Manager on unusual or complex
problems.
Requires extensive and independent contact with clients, vendor’s representatives and
project field personal. Attend and participate in client and PMT meetings.
Performing routine surveillance of the activities carried out by the Contractors to minimize
any adverse impact on the scheduling of the activities.
Project Involved
Designation : QC Inspector
Industry : Oil & Gas Company
Project Involved : Topside
Client / Owner : SARAWAK SHELL SDN BHD
Designation : QC Inspector
Industry : Oil & Gas Company
Project Involved : A Topside.
Client / Owner : SHELL SDN BHD
Designation : QC Inspector
Industry : Oil & Gas Company
Project Involved : Piping
Client / Owner : MALAYSIA DEEPWATER FLOTING TERMINAL (MDFT)
Designation : QC Inspector
Industry : Oil & Gas Company
Project Involved : Piping
Client / Owner : SAIBOS, SAIPEM S.A
REFERENCES