Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

PDS FCS-8000-1

BOSCH AVIOTEC IP Starlight 8000 Video Fire Detection


Features
• Very fast fire and smoke detection - identifies smoke
and fire at the source

• Robust against false alarms

• Covers large monitoring areas

• Outstanding performance under low-light conditions

• 1080p resolution

• Minimise damage onsite

• Reduce rescue response time

• Live streaming and Video storage

Description Typical Applications


The Bosch AVIOTEC IP Starlight 8000 video-based fire • Buildings with high ceilings like Art Galleries
detection, is a new solution that supplements existing fire and Museums
detection technologies. The AVIOTEC provides reliable and
early fire detection in challenging environments where • Dusty and Humid areas
standard detection methods can not offer satisfactory reaction
times or no other solutions exist. • Saw mills and Paper mills

Approved to VDS2344 the procedure for the Testing, • Aircraft Hangars


Approval and Certification of products and systems for Fire
Protection and Security Technologies, the AVIOTEC VFD • Extremely large indoor monitoring areas
offers proven detection reliability for all test fires (TF1 through
TF8) as specified in ISO AS7240 and EN54 standards. • Warehouses
Verification time, sensitivity, detection size and selective
AVIOTEC VFD has the ability to identify both smoke and
masking for smoke and flame are individually configurable to
flames at the source. By detecting fires at the source rather
adjust them to the customer needs. Flame and smoke
than the ceiling, the camera can issue an alarm within
detection can be activated or deactivated separately.
seconds when other standard detection methods can take
minutes to detect an alarm condition. This fast reaction time
reduces the emergency response time therefore minimising
damage, loss of assets and life.

Using intelligent algorithms, AVIOTEC can distinguish


between real fires and disturbance values like reflections,
movements or backlights. This guarantees a very reliable
detection with almost no false alarms.

On board SD card incident recording is available or the


camera can be connected to a Video Recording Management
System. The recording functionality provides the ability to
playback video streams for root cause analysis and
evaluation of an incident. This helps users eliminate and
prevent hazardous situations in the future.
With a fast ethernet port the AVIOTEC is easily configurable 1. Video Recording Manager (VRM)
and can be monitored through network devices such as Client 2. Client PC
PC’s and mobile devices. 3. Mobile Device
4. Fire Alarm CIE

World Leader of Innovative Solutions in Fire Detection and Alarm Systems www.ampac.net
Technical Specifications
Algorithm Overview Power

Flame Smoke Power Supply 12 VDC; PoE 48 VDC nominal


Min. Detection Size 1.6 2.3 Current 750mA (12 VDC); 200mA (PoE)
(% of picture width)
Power consumption 9W
Rising Speed - 0.7- 4.2
(% of picture height/s) PoE IEEE 802.3af (802.3at Type 1) Class 3

Audio Streaming Network


Standard G.711,8kHz sampling rate
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/
L16, 16kHz sampling rate
RTCP, IGMP V2/V3, ICMP, ICMPv6,
AAC-LC, 48 kbps at 16 kHz sample rate
RTSP, FTP, Telnet, ARP, DHCP, APIPA
AAC-LC, 80 kbps at 16 kHz sample rate
(Auto-IP, link local address), NTP
(SNTP), SNMP (V1, MIB-II), 802.1x,DNS,
Signal-to-Noise Ratio >50 dB
DNSv6, DDNS (DynDNS.org, selfHost.de,
Audio Streaming Full duplex / half duplex no-ip.com), SMTP, iSCSI, UPnP (SSDP),
Environmental (Indoor Use) DiffServ (QoS), LLDP, SOAP, Dropbox,
CHAP, digest authentication
Operating -20°C to +50°C (-4°F to 122°F)
Temperature Encryption TLS 1.0, SSL, DES, 3DES
Storage Temperature -30°C to +70°C (-22°F to 158°F) Ethernet 10/100 Base-T, auto-sensing, half/full
Operating Humidity 20% to 93% RH duplex
Connectivity ONVIF Profile S, Auto-MDIX
Input/Output
Mechanical
Analog video out SMB connector, CVBS (PAL/NTSC),
1Vpp, 75 Ohm Dimensions (W x H x L) 78 x 66 x 204 mm
Audio line in 1 Vrms max, 18 kOhm typical Weight 985 grams
Audio line out 0.85 Vrms at 1.5 kOhm typical Colour RAL 9006 Metallic Titanium
Audio connectors 3.5mm mono jack Tripod Mount Bottom and top 1/4 inch 20 UNC

Alarm input 2 inputs Software

Alarm input activation +5 VDC nominal, +40 VDC max. (DC Unit Configuration Via Web browser or Configuration
coupled with 50kOhm pullup resistor to
+3.3 VDC) (<0.5 V is low; > 1.4 V is high) Firmware Update Remotely programmable
Alarm output 1 output Software Viewer Web browser, Bosch Video Client, or
Alarm output voltage 30 VAC or +40 VDC max
Video
Ethernet RJ45
Resolution 1080p HD, 720p HD, 480p SD
Data port RS-232/422/485
Streaming H.264(MP); M-JPEG
Local Storage
Internal RAM 10 sec pre-alarm recording
Item Number
Memory card slot Supports up to 32 GB microSDHC / 2 TB
FCS-8000-VFD-B AVIOTEC IP Starlight 8000 VFD
microSDXC card. (Class 6 or higher)
Recording Continuous recording , ring recording
and Alarm/Events/Schedule recording

World Leader of Innovative Solutions in Fire Detection and Alarm Systems www.ampac.net

You might also like