Professional Documents
Culture Documents
Boomer M-Series: Face Drilling Rig For Tunneling and Mining Applications With A Coverage Area Up To 65 M
Boomer M-Series: Face Drilling Rig For Tunneling and Mining Applications With A Coverage Area Up To 65 M
1
Battery driveline benefits
Reloaded to
meet your The 150 kW electric drive train of the The complete drive train and battery are Automatic battery management and the
conditions
Boomer M2 Battery emits 80% less heat based on commercial, well-tested compo- industry's safest battery solution make it
during tramming than its diesel-driven nents that enable high performance and ideal for optimal production in demanding
counterpart's 120 kW diesel engine. efficiency. underground work environments.
Significant improvements in
The Boomer M-series face drilling rigs have become reliability with upgraded feeds
Main benefits
ROPS and FOPS certified cabin
Upgraded safety and ergonomics with ROPS and for added safety (optional)
FOPS certified cabin, improved interior and safe
bolting boom function
site visits and feedback from operators and service technicians to identify what equipment COP MD20 Advanced Boom Control (ABC) Pure
Hole blowing kit Advanced Boom Control (ABC) Regular
areas should be enhanced. Water mist flushing, external water and air supply** Advanced Boom Control (ABC) Total
Water mist flushing, external water, internal air supply** Measure While Drilling (MWD)
+ Safe bolting boom function Rock drill lubrication warning kit Underground Manager PRO (PC software)
Lubrication air filtration system Underground Manager MWD (PC software) for analysis of drill data
The Boomer M-series is unique in the mining and construction world because it
* Requires RCS and may require a larger electrical motor Bolt view
offers a safe bolting boom function for the semi-mechanized installation of rock ** Not in combination with COP 3038
Two operator panels (for standing operation only)
bolts. Due to the design of the BUT 36S booms and the side platforms on both
Rig access control
sides of the operator station, it is possible to swing the feed all the way back to a
Boom A B C Rig Remote Access (RRA), LAN or WLAN connection
position where the operator can safely load bolts into the feed without having to
BUT 35 SL Total station navigation
pass in front of the machine into areas with an unsupported roof.
BUT 36 S T Certic Professional
Automatic boom lubrication for positioning unit Dynamic Tunneling Package (DTP)
24 V Batteries 2x125 Ah
Filtration 16 μm 700 V Battery 280 Ah
Even the best equipment needs to be
Oil filter indicator Tramming lights 8x22 W LED
serviced regularly to make sure it sustains
Extra filtration package for water and fine particle removal
peak performance. An Epiroc service Working lights 4x150 W, 24 V DC
Mineral hydraulic oil
solution offers peace of mind, maximizing Illuminated stairs LED
Biodegradable hydraulic oil * Depending on selected rock drill
availability and performance throughout
Electrical oil filling pump ** When equipped with COP 3038
the lifetime of your equipment. We focus
Heater kit for hydraulic oil tank, diesel engine and electric motors
on safety, productivity and reliability.
Ni-Cr plated piston rods (limitations exist)
4 5
= Standard = Option
Technical specifications A = Boomer M1 B = Boomer M2 C = Boomer M2 Battery Technical specifications
Dimensions in millimeters
Drifter rods
Carrier A B C
Rock drill Rod Min. hole diameter (mm)
Deutz TCD 2013 L04 2 V stage IIIA/Tier 3 (120 kW)
SR35-H35-T38 Speedrod 38
Deutz TCD 4.1 L04, stage IV/Tier 4 F (115 kW) COP 1838
COP 2238 SR35-H35-T38 38
Traction motor, 150 kW COP MD20
SR35-R39-T38 38
Articulated steering ±41° steering angle*
TCD 4.1 stage 5 alternative COP 3038 SR35-R39-T38 45
3 043
Four-wheel drive
Hose/cable guiding at water/cable reel Extension rods for injection drilling/RAS
2 387
1 947
Dana 113 (short) axle Rock drill Rod Min. hole diameter (mm) M2
Automatic differential lock on axles, limited slip COP 1838 Rnd 32 Speedrod 38
COP 2238
Tires 12.00xR24 COP MD20 Rnd 39 Speedrod 38
1 049 2 000 2 170 795
Clearance outside axles 13° rear, 22° front
COP 3038 TC42-R39-TC42 Speedrod 64 3 156 4 170 934
Fuel tank, volume 110 l 14 598 with BMH 6914
Central lubrication system
Fire suppression system ANSUL (Manual, checkfire or automatic)
Shank adapters Boomer M2 Battery equipped with COP 1838.
Fire suppression system FORREX (Automatic) Rock drill Rod Min. hole diameter (mm)
Rig washing kit R38 38
COP 1838
Manual lubrication kit COP 2238 T38 38
COP MD20
Boot washing kit R32* 38
Hydraulic Swellex pump type H1 for manual installation COP 3038 TC42 (conical T-thread) 45
Hydraulic outlet for charging with Mini SSE *Intended for RAS and extension drilling with BSH 110
*If RHS E or SP2 service platform is equipped the steering angle will be reduced to 30°
3 043
Couplings
Protective roof A B
2 297
Rock drill Rod Diameter (mm) Length (mm)
1 947
Mounting height -80 mm/+310 mm M2
COP 1838 R38 55 170
Manual spotlight, left and/or right COP 2238
COP MD20 T38 55 170
Two operator panels (for standing operation only)
COP 3038 TC42/T38 57 175 1 049 1 800* 2 170 795
Swingable seat for drilling and tramming (one operator panel only) 2 900 3 970 934
14 297 with BMH 6814
Recommended cable size and length
Cabin (optional) A B Voltage Type Dimension (mm2) Diameter (mm) Length (m) Rock drill Boomer M2 equipped with COP 3038.
ROPS and FOPS certified cabin, noise level <80 dB(A) COP * COP 3038 adds 200mm.
380-400 V Buflex 3x185+3G35 56 90
Mounting height -140/+250 mm 1838/2238
Low profile cabin -150 mm COP
440-500 V Buflex 3x150+3G25 52 100
1838/2238
Air conditioning unit COP
One boom rig
550 V Buflex 3x120+3G25 46 120
Heating function for air conditioning (water transferred) 1838/2238
7 483
1838/2238
Electrical heater, 1.2 kW, 230 V (CE)
7 178
660-690 V Buflex 3x150+3G25 52 100 COP 3038
Electrical heater, 10 kW, 700 V (CE)
COP
Reversing camera with monitor 1 000 V Buflex 3x50+3G10 33 200
1838/2238
Fixed seat 1 000 V Buflex 3x95+3G16 45 150 COP 3038
Swingable seat for drilling and tramming Recommendations are given for surrounding temperature of 40°C and up to a height
of 2 000 m. Cable dimension for battery version depends on charging cycle. 200
Cabin body made of stainless steel
Joystick-controlled spotlights left and/or right, 70 W
9 655
Front window 22 mm (P8B saftey classed) Noise and vibration
10 068
Media player Operator sound pressure level in canopy, drilling, free
104±6 dB(A) re 20 uPa
field (ISO 11201)
Operator sound pressure level in cabin, drilling, free Boomer M-series, coverage area.
75±3 dB(A) re 20 uPa
field (ISO 11201)
Operator sound pressure level working close to ma-
104±6 dB(A) re 20 uPa
chine, drilling, free field Dimensions Tramming speed
Sound power level (ISO 3744), drilling, free field 128 dB(A) re 1 pW*
Width 2 550 mm On flat ground (rolling resistance 0.05)* >15 km/h
Vibration levels seated, drilling (ISO 2631-1) cabin 0.07±0.07 m/s^2
Height with cabin 3 179 mm On incline 1:8 >5 km/h
Vibration levels standing, drilling (ISO 2631-1) cabin 0.07±0.07 m/s^2
Height roof up/down 3 019/2 324 mm * Electric driveline >12 km/h
131 dB(A) re 1 pW when equipped with COP 3038
Length with BMH 6814 feed(s) 14 297 mm
Gross weight (depending on configuration)
Ground clearence 260 mm
Rig type Total Boom side Engine side
Turning radius outer/inner (Equipped with COP 1838) 7 500/4 400 mm
One boom rig 18 000-20 000 kg 9 000-11 000 kg 9 000 kg
Turning radius outer/inner (Equipped with COP 3038) 7 200/4 400 mm
Two boom rig 23 000-29 000 kg 17 500-19 000 kg 6 000-10 000 kg
6 7
9869 0080 01c 2019-05 Örebro, Sweden. Legal Notice © Copyright 2018, Epiroc Rock Drills AB, Örebro, Sweden. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications
or otherwise. Specifications and equipment are subject to change without notice. Consult your Epiroc Customer Center for specific information.
epiroc.com
commitment drives us to keep moving forward.
Performance unites us, innovation inspires us, and