Professional Documents
Culture Documents
Instruction To Reinstall Android and Windows For Vi10 Plus
Instruction To Reinstall Android and Windows For Vi10 Plus
Instruction To Reinstall Android and Windows For Vi10 Plus
Attention
Please flash BIOS firstly, and then reinstall android. Finally reinstall windows.
(There is no need to flash BIOS if the OS crash. You can skip the step of flashing
BIOS)
I.Flashing BIOS
Tip: There is no need to flash BIOS if you only reinstall OS. Flashing
wrong BIOS may brick your tablet.
Step 1
Format the USB drive into the FAT32 format and rename it as "WINPE"
Copy the sub-files in BIOS folder to the root directory of USB drive as follows:
Step 2
Tablet connects OTG, and OTG connects HUB. plug the USB drive and keyboard
in the Hub as the picture shows:
Press power button to turn on the tablet. At the same time, please click the "F7"
button continuously into the boot mode as the picture follows:
Step 3
Choose "UEFI: SanDisk, Partition 1" and enter press "Enter" to flash BIOS.
When it finishes, it will turn on automatically.
II. Reinstall android
Step 1
Step 3:
Open window 10 image folder to copy the sub-files to the root directory of the
USB drive.
Step 2
The Tablet connects Hub and plug the USB drive and keyboard in the Hub as the
picture shows:
Press power button. At the same time, please click the "F7" button continuously
into the boot mode as the picture follows:
Choose "UEFI: SanDisk, Partition 1" and enter press "Enter" to flash BIOS.
When it is finished, it will turn on automatically.
When it finishes, it will turn off automatically.
Step 3
The programming will last about 5 to 10 minutes. When it is finished, the tablet
will shut off automatically. It lasts 5 minutes in the interface of Getting Ready
and then it will restart Windows 10.