This document compares the diameter sizes of imperial and metric bolts and discusses the effects of mixing imperial and metric bolts and holes. It finds that:
1) The diameter sizes of metric bolts sometimes differ from their imperial equivalents, with the metric bolt typically being either slightly larger or smaller.
2) Using an imperial bolt in a metric hole may result in the bolt being either too loose or too tight of a fit depending on the diameter sizes involved.
3) Mixing imperial and metric bolts and holes is generally not recommended without ensuring the bolt hole diameters meet standard tolerance requirements for a proper fit.
This document compares the diameter sizes of imperial and metric bolts and discusses the effects of mixing imperial and metric bolts and holes. It finds that:
1) The diameter sizes of metric bolts sometimes differ from their imperial equivalents, with the metric bolt typically being either slightly larger or smaller.
2) Using an imperial bolt in a metric hole may result in the bolt being either too loose or too tight of a fit depending on the diameter sizes involved.
3) Mixing imperial and metric bolts and holes is generally not recommended without ensuring the bolt hole diameters meet standard tolerance requirements for a proper fit.
Original Description:
Comparison diameter between Imperial & Metric Standard
This document compares the diameter sizes of imperial and metric bolts and discusses the effects of mixing imperial and metric bolts and holes. It finds that:
1) The diameter sizes of metric bolts sometimes differ from their imperial equivalents, with the metric bolt typically being either slightly larger or smaller.
2) Using an imperial bolt in a metric hole may result in the bolt being either too loose or too tight of a fit depending on the diameter sizes involved.
3) Mixing imperial and metric bolts and holes is generally not recommended without ensuring the bolt hole diameters meet standard tolerance requirements for a proper fit.
This document compares the diameter sizes of imperial and metric bolts and discusses the effects of mixing imperial and metric bolts and holes. It finds that:
1) The diameter sizes of metric bolts sometimes differ from their imperial equivalents, with the metric bolt typically being either slightly larger or smaller.
2) Using an imperial bolt in a metric hole may result in the bolt being either too loose or too tight of a fit depending on the diameter sizes involved.
3) Mixing imperial and metric bolts and holes is generally not recommended without ensuring the bolt hole diameters meet standard tolerance requirements for a proper fit.
A. DIFFERENCES DIAMETER OF BOLT BETWEEN "IMPERIAL VS METRIC"
Dia Bolt Dia Bolt Check Diameter of Bolt Inch version Convert to mm Equivalent metric Version Differences in mm mm mm Metric vs Imperial (Inch) 1/2 12.70 12 0.70 Metric version have Larger Diameter than Imperial version 5/8 15.88 16 -0.13 Metric version have Smaller Diameter than Imperial version 3/4 19.05 20 -0.95 Metric version have Smaller Diameter than Imperial version 7/8 22.23 22 0.22 Metric version have Larger Diameter than Imperial version 1 25.40 24 1.40 Metric version have Larger Diameter than Imperial version 1 1/8 28.58 27 1.58 Metric version have Larger Diameter than Imperial version 1 1/4 31.75 30 1.75 Metric version have Larger Diameter than Imperial version 1 3/8 34.93 36 -1.08 Metric version have Smaller Diameter than Imperial version 1 1/2 38.10
B. EFFECT IF INCH BOLT USE IN METRIC HOLES
Dia bolt Standard Bolt Hole Tollerance Inch Version Metric Version Bolt Hole - Dia bolt Check Bolt Hole Diameter mm mm mm 12.70 14 1.30 Below minimum standard holes diameter requirement 15.88 18 2.13 Above minimum standard holes diameter requirement, Should treated a Oversize Hole 19.05 22 2.95 Above minimum standard holes diameter requirement, Should treated a Oversize Hole 22.23 24 1.78 Below minimum standard holes diameter requirement 25.40 27 1.60 Below minimum standard holes diameter requirement 28.58 30 1.43 Below minimum standard holes diameter requirement 31.75 33 1.25 Below minimum standard holes diameter requirement 34.93 39 4.08 Above minimum standard holes diameter requirement, Should treated a Oversize Hole