Professional Documents
Culture Documents
MT en Pro Aquatrac-3e VW 2013-06
MT en Pro Aquatrac-3e VW 2013-06
re tha
Mo ears
y
50 ce
e rien
exp
Brabender Messtechnik®
GmbH & Co. KG
AQUATRAC - 3E
®
Moisture Meter for Plastics
AQUATRAC®-3E
plastic material has a great influ-
ence on the quality of the finished
product. The test should be made
swiftly on an instrument with a
simple test procedure.
With the AQUATRAC® - 3E different
AQUATRAC - 3E is the result of
® ranges are obtained by different
continuous development of the sample weights. AQUATRAC® - 3E
popular AQUATRAC® product, is able to detect even the most
which has been on the market minute traces of moisture (less
for over 20 years. Developed pri- than 0,01% H2O) in large, repre-
marily for the plastics-processing sentative testing samples (up to
Ranges
industry, the device measures 100 g). In the case of lower-weight
the moisture content of granular samples, the measuring range can
solids. be increased to detect very high
degrees of moisture.
AQUATRAC® - 3E is robust, com-
pact and easily transportable. Since AQUATRAC® - 3E is now
This means there are many differ- able to achieve ultra-precise read-
ent ways to use AQUATRAC® - 3E ings using a single measuring cup,
directly at the production site, for it is no longer necessary to switch
example: from one measuring cup to another.
Reagent
erate a gas. The gas produced is amount of the reagent. The quantity
hydrogen; the gas pressure is of one filling is sufficient material for
AQUATRAC -3E
proportional to the water content a couple of measurements and the
in the sample and is monitored amount of hydrogen produced by
by means of a piezoelectric trans- each measurement is very low. The
ducer. AQUATRAC® - 3E calcu- calcium hydride can be supplied in
lates the ratio of pressure to sam- quantities of 250g, which is suffi-
ple weight and displays the result cient for approx. 1000 tests.
in terms of H2O content, either as
a percentage or in parts per million
(ppm). Volatiles other than water do
®
not react with the reagent and will
condense, hence not influencing
the reading. The reagent is placed
in a mesh based insert above the AQUATRAC® - 3E contains an ex-
sample. The partial pressure in the
Product data bank
All dimensions in mm
Thermoplastics, e.g.:
Acrylonitrile butadiene styrene ABS
Polybutyleneterephthalate PBT
Polyamide 6.6 PA 6.6 For calibration of AQUATRAC® - 3E
Applications
Polyamide 6 PA 6 GF 30 the standard sodium molybdate
Polyamide 12 PA 12 dihydrat according DIN EN ISO
Polycarbonate PC 15512 is used.
Polyester PET
Calibration is made like a standard
Calibration
Polyester elastomer TPE
test and can be done on site.
Polyetherimide PEI
Polyethylene HDPE
Polyethylene LDPE
Polyethyleneterephtalate PETP
Polymethylmethacrylate PMMA
Polypropylene PP
Duroplastics, e.g.:
Epoxide resin
Acrylate The AQUATRAC® - 3E’s internal
Silicon resin hard drive can store up to 500 read-
Vinyl resin ings. Measurement results can be
Elastomers, e.g.: easily transferred to a computer for
Data storage
Styrene-butadiene rubber SBR further processing via an USB stick.
Chloroprene rubber CR The AQUATRAC® - 3E is optional
Polyurethane rubber PUR via an Ethernet interface network-
compatible, too.
By connecting a printer, results
data can be directly printed from
AQUATRAC® - 3E.
Technical data
Measuring principle Chemical reaction with calcium hydride
• Measurement accuracy:
+ 2% of reading / + 1% of range
Accuracy
• Reproductibility:
approx. + 1% of reading
3 different ranges:
• lower 0,1%
Ranges
• 0,1% - 0,5%
Brabender • higher 0,5%
www.brabender-mt.de
sales@brabender-mt.de
AQUATRAC-3E / GB / 06 / 2013
BD
&LA'
@M
CT
SH N Zert.Nr.: 18031006
TQ
RR
B
MØ0
1R T @ KHS X Ø
WLIL F (*
D WL R Q
D F F W R