Professional Documents
Culture Documents
Allows A Choice of Test Options DSP-FTK - Fiber Test Kit
Allows A Choice of Test Options DSP-FTK - Fiber Test Kit
Now you can verify fiber optic cable per- Allows a choice of test options
DSP-FTK — Fiber Test Kit formance with any of your DSP Series Cable Use the DSP-FOM Fiber Optic Power Meter
• Includes fiber optic power meter Testers, the OneTouch Network Assistant or to measure optical power, in dBm or µW.
(DSP-FOM) and LED light source the OptiView Integrated Network Analyzer. You can also measure optical power loss
(FOS-850/1300) By simply connecting Fluke Network’s Fiber (expressed in dB). The power loss (or atten-
Test Kit (DSP-FTK) you can measure power uation) measurement compares the measured
• Measures optical power in dBM or µW
or power loss in optical fiber links used in light energy at the end of the link (output)
• Measures optical power loss in dB premises wiring and Local Area Networks to the reference level at the input (the light
• Optical power meter measures light (LAN). The DSP-FTK detects poor connec- source). This loss test result delivers a true
energy at 850 nm, 1300 nm, 1310 nm tions, bad splices, broken fibers, plus loss optical loss measurement for the link by
and 1550 nm of light energy due to cable bends or fiber subtracting the loss associated with the
type mismatches. And of course, these fiber optic patch cables. The operator can
• LED power source generates both
tools deliver all the accuracy, ease-of-use specify the Pass/Fail limit for loss and
850 nm and 1300 nm wavelengths
and convenience you expect from also the direction (A-B or B-A) of the
• Optional laser power source generates Fluke Networks. measurement.
both 1310 nm and 1550 nm The Fluke Networks fiber optic sources
wavelengths Simplifies fiber testing work with the DSP-FOM to test either multi-
The fiber optic power meter (DSP-FOM) mode or singlemode fiber. The LED power
• Stores test results automatically in
interfaces with all DSP Series Cable Testers, source generates 850 nm and 1300 nm
the cable tester
the OneTouch Network Assistant and the wavelengths while the LASER source gener-
• Specifies maximum acceptable OptiView Integrated Network Analyzer using ates 1310 nm and 1550 nm wavelengths.
loss limit a short twisted-pair patch cable which plugs
• Specifies and documents the direction into the 8-pin modular jack on these testers. Generates complete reports
of measurement (A-B or B-A) Just select the wavelength to be measured through a PC or directly to
with the optical meter’s slide switch (850
• Lightweight, heavy-duty design for a printer
nm, 1300 nm and 1550 nm), and the tester
rugged field use You can record and store any combination of
will input, display and store the measure-
copper or fiber Autotest reports with the
ment. Test results for optical links are saved
DSP Series cable testers. Each test report
in the cable tester’s (DSP-100, DSP-2000 or
can be assigned a unique, user-defined
DSP-4000 Series) memory in the same way
label, and can be downloaded to a PC or
as results for copper cabling links.
printed directly from the cable tester to a
The DSP-FOM works with DSP-100s
serial printer. Test reports contain wave-
with software version 3 or higher, all
length, measured loss, loss limit, test direc-
DSP-2000s and DSP-4000s, OneTouch
tion and reference level.
Network Assistant with software version
2.2 or higher and the OptiView Integrated
Network Analyzer with software version
2.5 or higher. For information and to
download the most recent software
release for your product, visit
www.flukenetworks.com/support.
• NF300SM (1), ST to ST Fiber Optic Adapter (Singlemode) Storage temperature -20°C to +70°C
Dimensions 4.5 x 2.5 x 1.5 in (11.4 x 6.4 x 3.8 cm)
• Instrument Instruction Sheet
Weight 5.0 oz. (142g)
Battery type 9V alkaline
Battery life 24 hours typical
Available accessories
FOS-850 850 nm Fiber Optic Source (LED, Multimode) Optional LS-1310/1550 Laser Source
FOS-1300 1300 nm Fiber Optic Source (LED, Multimode) Output wavelengths 1310 nm or 1550 nm, switch selectable
Power output -10 dBm, adjustable
FOS-850/1300 Combination 850 nm / 1300 nm Fiber Optic Source
Source type Laser (Class I)
FOC-ST/ST ST to ST Fiber Optic Patch Cable (Multimode)
Optical adapter Single Mode ST
FOC-ST/FC ST to FC Fiber Optic Converter Cable (Multimode)
Operating temperature 0°C to +40°C
FOC-ST/SC ST to SC Fiber Optic Converter Cable (Multimode) Storage temperature -10°C to +60°C
FOC-ST/SMA ST to SMA Fiber Optic Converter Cable (Multimode) Dimensions 6.8 x 3 x 1.5 in (17.4 x 7.6 x 3.8 cm)
NF100SM ST to ST Fiber Optic Patch Cable (Singlemode) Weight 9.4 oz. (266 g)
Battery type 9V alkaline
NF110SM ST to SC Fiber Optic Converter Cable (Singlemode)
Battery life 16 hours typical
NF120SM ST to FC Fiber Optic Converter Cable (Singlemode)
NF300SM ST to ST Fiber Optic Adapter
NF310SM SC to SC Fiber Optic Adapter
N E T W O R K S U P E R V I S I O N
E-mail: fluke-assist@flukenetworks.com
Web access: http://www.flukenetworks.com