The Hyperion X9 has the following key specifications:
1. It operates between 115-240VAC at 50/60Hz and can absorb up to 14A/7A of current. The X-ray column movement cycle is 25 seconds on and 400 seconds off.
2. The generator voltage is 60-85kV for 2D mode and 90kV for 3D mode. The anode material is tungsten. The inherent filtration is 3.2mm Al for 2D mode and 6.2mm Al for 3D mode.
3. For CB3D mode, the operating voltage is 90kV at 10mA maximum current. The exposure time is 18-
The Hyperion X9 has the following key specifications:
1. It operates between 115-240VAC at 50/60Hz and can absorb up to 14A/7A of current. The X-ray column movement cycle is 25 seconds on and 400 seconds off.
2. The generator voltage is 60-85kV for 2D mode and 90kV for 3D mode. The anode material is tungsten. The inherent filtration is 3.2mm Al for 2D mode and 6.2mm Al for 3D mode.
3. For CB3D mode, the operating voltage is 90kV at 10mA maximum current. The exposure time is 18-
The Hyperion X9 has the following key specifications:
1. It operates between 115-240VAC at 50/60Hz and can absorb up to 14A/7A of current. The X-ray column movement cycle is 25 seconds on and 400 seconds off.
2. The generator voltage is 60-85kV for 2D mode and 90kV for 3D mode. The anode material is tungsten. The inherent filtration is 3.2mm Al for 2D mode and 6.2mm Al for 3D mode.
3. For CB3D mode, the operating voltage is 90kV at 10mA maximum current. The exposure time is 18-
The Hyperion X9 has the following key specifications:
1. It operates between 115-240VAC at 50/60Hz and can absorb up to 14A/7A of current. The X-ray column movement cycle is 25 seconds on and 400 seconds off.
2. The generator voltage is 60-85kV for 2D mode and 90kV for 3D mode. The anode material is tungsten. The inherent filtration is 3.2mm Al for 2D mode and 6.2mm Al for 3D mode.
3. For CB3D mode, the operating voltage is 90kV at 10mA maximum current. The exposure time is 18-
Power supply frequency 50 / 60 Hz Current absorbed in rest conditions 1A @ 115V; 0.5A @ 240V Maximum current absorbed in operating conditions 14A @ 115V; 7A @ 240V Column movement operating cycle 25 s ON, 400 s OFF Maximum apparent line resistance 0.5 Ω @ 240V – 0.25 Ω @ 115V Technical factors corresponding to the maximum 85 kV 10 mA power absorption
2. RADIOLOGICAL FEATURES
Generator voltage 60 – 85 kV continuous mode (2D MODE)
90 kV pulsed mode (3D CB3D MODE) (selectable in steps of 1 kV) Anode current 1 – 10 mA continuous mode (2D MODE) selectable in steps of 1 mA 3 – 10 mA pulsed mode (3D CB3D MODE) with automatic selection Maximum deviations from declared values: kV: < 10% mA: < 10% Linearity < 5 % Coefficient of variation < 0.05 X-ray tube CEI OPX/105 Or TOSHIBA D-054SB Focal spot size 0.5 mm according to IEC 60336 Anode material Tungsten (W) Anode inclination 5° Anode thermal capacity 30 kJ (CEI) 35 kJ (Toshiba) Maximum continuous heat dissipation 270 W
Inherent filtration 3.2 mm Al @ 85 kV (2D mode)
6.2 mm Al @ 85kV (CB3D mode) Half Value Layer (HVL) 2D (PAN,CEPH): HVL=3.6mm @85kV 3D (CBCT mode): HVL=5.0mm @90kV (with automatic added filter), with CB3D mode Dispersed radiation < 0.88 mGy/h to 1m in any direction (1:20 duty cycle) @ 90 kV Exposure time (PAN/CEPH) 2.6 – 14 s, continuous radiation Load factor of X-ray unit Max 20 s ON, 400 sec. OFF Source distance - primary collimator 100 mm Source - skin distance (PAN) > 150 mm Source - skin distance (Ceph) > 1000 mm Source - skin distance (CB3D) > 150 mm Source - PAN sensor distance (SID) 55 cm Source - CEPH sensor distance (SID) 151 cm Output radiation intensity (Output dose) typical 0.30 mGy/s (+/- 30%) @ 70 kV, 10 mA, 1 m - 1.0 mGy/s (+/- 30%) @ 70kV 10 mA 55 cm X-RAY TUBE HEATING AND COOLING CURVE (CEI OPX/105)
X-RAY TUBE HEATING AND COOLING CURVE (TOSHIBA D-054SB)
TUBE HOUSING HEATING AND COOLING CURVE
PAN beam opening
3. RADIOLOGICAL FEATURES IN CB3D MODE
Operating voltage 90kV with all projections
Generator voltage at maximum current 90kV - 10mA Load factors for the maximum output power 90kV - 10mA Maximum output rated power (value averaged with 810 VA (90kV 10mA variable duty cycle) T>4s) Exposure time (CB3D) 18 – 36 sec pulsed mode, with actual X-ray emission time 3.6-9 sec Operating cycle in pulsed mode for CB3D exposure 20% - 90%
4. PAN / CEPH SENSOR FEATURES
Detectors PAN CCD
CEPH CCD Pixel size 48 m Pixel binning mode Binning hardware 2X2: giving pixel size 96 m Number of tiles 2 for PAN projections 3 for CEPH projections Effective image reception area 146 x 6 mm for PAN detector 220 x 6 mm for CEPH detector Number of active pixels per tile 1536 x 128 per tile (not binned) Dead area at tile junction ≤ 192 m (corresponding to 2 rows in 2X2 binning) Detector life cycles > 30'000 exposures depending on type of exam