Professional Documents
Culture Documents
Fmea Example
Fmea Example
Fmea Example
Occurrence
Detection
Severity
Potential
Op. Potential Failure
Process Function Potential Effect(s) of Failure Cause(s) of Current Controls RPN
No. Mode
Failure
Incomplete
On product: product can be reject
information to Varification of Mill TC
Raw Material Wrong grade of material On next process:none
10 5 supplier about 2 with p.o. provided to 3 30
receiving reeived At customer's end:part can be
raw material supplier
reject
grade
Incoming
inspection not
Wrong material composition On product: product can be reject
done / unskilled
& Grade recived according to On next process:none sample to be send
DAIMLER Raw material 5 inspector lack of 2 3 30
At customer's end:part can be to third party spectro
standard- E-500 knowldege to
reject
comapre mill tc
with std
50 Inprocess Inspection
On product:part rejects
part not qualified in receiving On next process:part reject first part approvel not 100% inspection to be
60 final inspection
gauge 5 2 2 20
At customer's end:part reject & done in bending done
customer dissatisfied
On product:part rejects
On next process:part reject inspection not done 100% qualify with reciving
70 Pre dispatch inspection wrong dimension observed 5 at final stage 3 gauge 2 30
At customer's end:part reject &
customer dissatisfied
Revised
Responsibility
Recommended
& Completion Action(s) Taken
Occ.
Sev.
Det.
RPN
Action(s)
Date
OVED BY : RAM PRASAD