The document contains machining code for milling operations on three different parts using a 3/16" end mill cutter. It includes G-code instructions for tool changes, positioning the tool, and cutting contours and pockets at two different depths on each part located at X2.3622 Y-.141, X1.0362 Y-.9641, and X3.6883 Y-.9641. The total machine time for the operations was 0 hours, 1 minute, and 7 seconds.
The document contains machining code for milling operations on three different parts using a 3/16" end mill cutter. It includes G-code instructions for tool changes, positioning the tool, and cutting contours and pockets at two different depths on each part located at X2.3622 Y-.141, X1.0362 Y-.9641, and X3.6883 Y-.9641. The total machine time for the operations was 0 hours, 1 minute, and 7 seconds.
The document contains machining code for milling operations on three different parts using a 3/16" end mill cutter. It includes G-code instructions for tool changes, positioning the tool, and cutting contours and pockets at two different depths on each part located at X2.3622 Y-.141, X1.0362 Y-.9641, and X3.6883 Y-.9641. The total machine time for the operations was 0 hours, 1 minute, and 7 seconds.