Professional Documents
Culture Documents
Digital Assignment 1: Inverting and Non-Inverting Amplifiers
Digital Assignment 1: Inverting and Non-Inverting Amplifiers
To understand the input and output characteristics of an Inverting and non-Inverting Amplifier.
Apparatus Required:
• Capture CIS
• OrCAD PSPICE
Circuit Diagram:
Inverting Amplifier
Non-Inverting Amplifier
18BEE0014
Procedure:
1.We use the PSPICE software for the stimulation of the circuit.
2.We begin with adding components of the circuit as per our requirement.
3.Then we provide the wiring of the circuit.
6.Finally we click on the new stimulation button and set the time.
7.Then the voltage differential markers are placed at the input and output.
Snaps of Output:
18BEE0014
Inverting Amplifier (with Vampl=1V)
18BEE0014
Attestation:
18BEE0014
Inference/Result:
• In the case of Inverting Amplifiers there is an amplified output that is 180o out of phase
whereas there is an amplified output in phase in case of non-Inverting amplifier
• When the output voltage is greater than 15V, the output gets clipped of at 15V.
18BEE0014