The document contains calculations for cycle times and output rates for two injection molding processes. For the first process, it is calculated that with a cycle time of 28 seconds, 16 mold cavities of which 13 will be used, over 8 working hours the output will be 13,371 pieces with 1.47 hours of downtime, resulting in an output rate of 2,057 pieces per hour. For the second process, with a cycle time of 6,000 pieces per hour, 8 mold cavities of which 6 will be used, over 8 working hours the output will be 4,500 pieces with 3.56 hours of downtime, resulting in an output rate of 4,500 pieces per hour.
The document contains calculations for cycle times and output rates for two injection molding processes. For the first process, it is calculated that with a cycle time of 28 seconds, 16 mold cavities of which 13 will be used, over 8 working hours the output will be 13,371 pieces with 1.47 hours of downtime, resulting in an output rate of 2,057 pieces per hour. For the second process, with a cycle time of 6,000 pieces per hour, 8 mold cavities of which 6 will be used, over 8 working hours the output will be 4,500 pieces with 3.56 hours of downtime, resulting in an output rate of 4,500 pieces per hour.
The document contains calculations for cycle times and output rates for two injection molding processes. For the first process, it is calculated that with a cycle time of 28 seconds, 16 mold cavities of which 13 will be used, over 8 working hours the output will be 13,371 pieces with 1.47 hours of downtime, resulting in an output rate of 2,057 pieces per hour. For the second process, with a cycle time of 6,000 pieces per hour, 8 mold cavities of which 6 will be used, over 8 working hours the output will be 4,500 pieces with 3.56 hours of downtime, resulting in an output rate of 4,500 pieces per hour.