Professional Documents
Culture Documents
M530W Assembly Disassembly
M530W Assembly Disassembly
M530W Assembly Disassembly
No:
ASUSTeK M530w Assembly & Disassembly Date: 2007.06.26
COMPUTER INC. SOP Revision:
Page: Grade:
Introduction
This section describes how to disassemble M530W telephone. Many of the integrated devices used in this
phone are vulnerable to damage. Ensure adequate static protection is in place when handling, shipping, and
servicing any internal components.
Recommended tools
Disassembly procedure
The following set of diagrams will demonstrate the correct sequence and action to disassemble M530w.
Step 1
Place M530w on the workbench and power it off.
Step 2
Remove the battery cover and take out the battery and SIM card. To remove the battery cover, press on the
battery cover on the bottom of the phone.
Step 3
Remove M530w RF Cover ASSY by Plastic blade.
Step 4
Remove 4*Screw M1.6*4L T5 by Screw Driver.
Doc. No:
ASUSTeK COMPUTER INC. M530w Assembly & Disassembly Date:
SOP Rev.: Page:4
Remove the Front Case and Bottom Case ASSY by Plastic blade.
Step 5
Remove receiver, Vibrator and Antenna Rubber from Bottom Case by Tweezers.
Doc. No:
ASUSTeK COMPUTER INC. M530w Assembly & Disassembly Date:
SOP Rev.: Page:5
Step 6
Remove 2*Screw M1.7*3.3L T5 by Screw Driver from Main Board.
Remove 2*Screw M1.6*4L T5 by Screw Driver from WIFI Board and release the WIFI Coaxial Cable.
Doc. No:
ASUSTeK COMPUTER INC. M530w Assembly & Disassembly Date:
SOP Rev.: Page:6
Step 7
Remove the VGA CMOS CAMERA MODULE.
Step 8
Remove the LCM FPC Hard Mylar and release the connector of LCM by tweezers.
Step 9
Remove receiver by tweezers from Front Case.
Doc. No:
ASUSTeK COMPUTER INC. M530w Assembly & Disassembly Date:
SOP Rev.: Page:7
Step 10
Remove Keypad FPC ASSY by Tweezers.
Step11
Remove M530w EN QWERTY KEY.
Step12
Remove LCM module from Case1.
Doc. No:
ASUSTeK COMPUTER INC. M530w Assembly & Disassembly Date:
SOP Rev.: Page:8
Assembly procedure
Step1
Assemble the LCM module from Case1.
Step2
Assemble M530w EN QWERTY KEY and Keypad FPC ASSY.
Step 3
Assemble the receiver by tweezers.
Doc. No:
ASUSTeK COMPUTER INC. M530w Assembly & Disassembly Date:
SOP Rev.: Page:9
Step 4
Assemble the 2.0M AM CAMERA and the VGA CMOS CAMERA MODULE.
Step 5
Connect the WIFI Coaxial Cable and Assemble WIFI Board with 2*Screw M1.6*4L T5 by Screw Driver.
Put on the microphone rubber.
Doc. No:
ASUSTeK COMPUTER INC. M530w Assembly & Disassembly Date:
SOP Rev.: Page:10
Step 6
Put on WIFI Board with 2*Screw M1.7*3.3L T5 by Screw Driver in the Main Board.
Step 7
Put on receiver, Vibrator and Antenna Rubber from Bottom Case by Tweezers.
Step 8
Put on Bottom Case with 4*Screw M1.6*4L T5 by Screw Driver.
Doc. No:
ASUSTeK COMPUTER INC. M530w Assembly & Disassembly Date:
SOP Rev.: Page:11
Step 9
Assemble the M530w RF Cover ASSY.
Step 10
Put the battery and Battery cover in the bottom of the phone.