Professional Documents
Culture Documents
README
README
README
----------How to Use-------------------
1. Install SCP driver (see next section) (you only need to do this once)
2. Connect the Controller to your PC and turn it on.
3. Run mi.exe
(if it prints that 1 or more controllers were connected, it's working)
Then just start your game or whatever and it should work perfectly.
Note: If you are on windows 7 or earlier you must download and install the
xbox 360 controller drivers which you can find on this page:
https://www.microsoft.com/accessories/en-us/products/gaming/xbox-360-controller-
for-windows/52a-00004#techspecs-connect
-- Install Summary --
Bus Device
Bus Driver
It worked
-- Uninstall Summary --
Bus Device
It worked
----------Changelog-------------------
----------Troubleshooting-------------------
--Mi.exe doesn't work
Make sure your controller has fresh batteries and put it closer to your bluetooth
adapter.
--Nothing works
Make sure you install the SCP driver in this zip. You might have some very old
version.