Professional Documents
Culture Documents
Calibration Procedure
Calibration Procedure
Calibration Procedure
NO:
UTR/UBEL/M/----- --l61/eq/001
REV A
ISSUED TO
NAME:
CONTROLLED COPY NO.: DESIGNATION:
ISSUED BY
SIGNATURE/DATE:
A 24/05/08
DOC.NO:
UTR/UBEL/M/----- --l61/eq/001
REV A
TABLE OF CONTENTS
1.0 PURPOSE..............................................................................................................................................
2.0 SCOPE...................................................................................................................................................
3.0 REFERENCES......................................................................................................................................
4.0 RESPONSIBILITIES............................................................................................................................
5.0 METHODOLOGY................................................................................................................................
DOC.NO:
UTR/UBEL/M/----- --l61/eq/001
REV A
1.0 PURPOSE
2.0 SCOPE
4.0 RESPONSIBILITY
5.0 METHOD
PRECALIBRATION REQUIREMENT:
Visually check for damage
LIST OF EQUIPMENTS REQUIRED TO CALIBRATE:
Manual welding m/c, Semi Automatic & Automatic welding machine
used used for GMAW, MMAW, GTAW, SAW & ESW welding.
Calibrated shunt/Clamp Meter
Calibrated Voltmeter
Calibrated Stopwatch
Calibrated measuring scale/tape.
Variable DC Power Source.
Calibrated mV Source/Sink meter.
5.1 PROCEDURE
Current Calibration
Actual current (in the welding range) is measured with the help of Tong
Tester.
Actual readings then compared with machine meter readings.
OR
Voltage Calibration: