Professional Documents
Culture Documents
- cf1-design DESIGN OF FOUNDATION F4 UNBRACED BA SHELL هات الأكسيل PDF
- cf1-design DESIGN OF FOUNDATION F4 UNBRACED BA SHELL هات الأكسيل PDF
1.75 FGL
Lx = 3.50 ex 0.80
0.80 P1 P2
ez Z 3.00 m
1.75 0.90 0.90
0.50 m
0.75 1.75 1.75 0.75
Lz = 5.00
Self Wt of Footing W1 = 218.75 kN
Wt of soil above Fdn W2 =(L X B-P1x X P1y - P2x X P2y)X(H-t)X18 = 722.70 kN
Wt of pedestal W3 =P1XXP1ZX(H-t)x25+P2XXP2ZX(H-t)x25 = 106.20 kN
Total Wt. = 1047.65 kN
RCC Design (Self Wt. of Footing+Wt. of Surrounding Soil)
Design for 1m width of slab 57.5 KN/m P1 P2
Design for maximum net soil pressure under the footing 0.75 3.50 0.75
Load factor for concrete design = 1.4
Max. Cant Bm at face of column = 16.2x(0.75-0.45)^2/2 0.7 kNm 73.65 KN/m per m run
1.30 FGL
Lx = 2.60 ex 1.00
1.00 P1 P2
ez Z 2.00 m
1.30 1.00 1.00
0.50 m
1.50 1.50 1.50 1.50
Lz = 6.00
Self Wt of Footing W1 = 195.00 kN
Wt of soil above Fdn W2 =(L X B-P1x X P1y - P2x X P2y)X(H-t)X18 = 367.20 kN
Wt of pedestal W3 =P1XXP1ZXHx25+P2XXP2ZXHx25 = 105.00 kN
Total Wt. = 667.20 kN
Max. Cant Bm at face of column = 171.5x(1.5-0.5)^2/2 85.8 kNm 211.00 kN/m per m run
= 379.05 mm
As = M/0.87fyZ
= 396.231555 mm2
Width = 1000
Effective Depth d = 399 mm (Self Wt. of Footing+Wt. of Surrounding Soil)
Max BM at face of column =171.5 x (1.3-0.5)^2/2 = 54.9 kNm 39.5 kN/m per m run
Max Shear at distance d =171.5 x (1.3-1/2-0.399)x1 = 68.772 kN 1.30 1.30
Mu/fcbd² = 0.010 N/mm2
pt Reinf. = 0.130
Bottom & Top Reinforcement
Reqd.
Dia of spacing Ast Pro.
Mu/fcbd² Min. % pt Ast,mm2 spacing pt,prov
rein bar provided mm2
mm 211.00 kN/m per m run
0.010 0.13 396.23 20 793 150 2094.395 0.525 2.60
The shear capacity is checked first on a perimeter 1.5d1 from the face of column.
If the calculated shear stress does not exceed Design shear stress then
No further checks are required. (Refer Clause 3.7.7.7, SS CP65: Part1: 1999)