Professional Documents
Culture Documents
ANT ATD4516R1 1493 Datasheet
ANT ATD4516R1 1493 Datasheet
Model: ATD4516R1
Antenna Specifications
Electrical Properties
Frequency range (MHz) 2555 - 2655 (D)
Polarization +45° , -45°
General
Electrical downtilt (°) 2 - 12 , continuously adjustable
parameters
Electrical downtilt tolerance (°) ±1
Grounding DC Ground
Coupling factor between calibration port and each
-26 ±2
antenna port (dB)
Max. amplitude tolerance from calibration port to input
≤ 0.7
ports (dB)
Max. phase tolerance from calibration port to input
≤5
Calibration and ports (°)
electrical
Ports VSWR < 1.5
parameters
Avg. power capacity (W) ≥ 25
≥ 20 @ 2°Electrical downtilt ; ≥ 25 @ 3°- 6°Electrical downtilt;
Co-polarization isolation between ports (dB)
≥ 28 @ 7°- 12°Electrical downtilt
≥ 25 @ 2°Electrical downtilt; ≥ 28 @ 3°- 6°Electrical downtilt;
Cross-polarization isolation between ports (dB)
≥ 30 @ 7°- 12°Electrical downtilt
Horizontal 3dB beam width (°) 65 ±15
Gain (dBi) ≥ 16.3
Vertical 3dB beam width (°) ≥5
Single Cross polar ratio (0°) (dB) ≥ 18
column beam
Cross polar ratio (±60°) (dB) ≥ 10 @ 2°- 7°Electrical downtilt; ≥ 8 @ 8°- 12°Electrical downtilt
Front to back ratio (dB) ≥ 25
Vertical side lobe suppression above
≤ -16
main beam (dB)
Horizontal 3dB beam width (°) 65 ±5
Gain (dBi) ≥ 17.3
Gain roll-off at sector edge (dB) 12 ±2
1
DX-2555-2655-65-16i-M-R
Model: ATD4516R1
106
Mechanical Properties
Distance between columns (mm) 75
Antenna dimensions (H x W x D) (mm) 1396 x 319 x 116
Packing dimensions (H x W x D) (mm) 1724 x 410 x 205
Antenna net weight (kg) 16.6
Bracket weight (kg) 4.6
Packing weight (kg) 24.7
Mechanical downtilt (°) 0 - 16
Mast diameter (mm) 50 - 115
1396
UPVC
1260
Radome material
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 620 (at 150 km/h)
Wind load (N) Lateral: 160 (at 150 km/h)
Rear side: 680 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 9 x N Female
Connector position Bottom
2
DX-2555-2655-65-16i-M-R
Model: ATD4516R1
RAE Properties
RAE type Integrated RAE, manages antenna information
RAE protocols AISG-ES-RAE V2.1.0
y - Yellow
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 3 Issue: 2017-02-27