Professional Documents
Culture Documents
Sicam Pas CC V7 0 SP1 PDF
Sicam Pas CC V7 0 SP1 PDF
Sicam Pas CC V7 0 SP1 PDF
SICAM PAS CC as C&M System for SICAM 1703 SICAM PAS CC as a C&M System for Devices with
Communication Standard IEC 61850
For communication with SICAM 1703, the protocol
IEC 60870-5-104 or IEC 61850 can be used. Devices communicating via IEC 61850 can be
Both TOOLBOX II V5.0 and SICAM PAS CC V7.0 connected directly to SICAM PAS CC.
SP1 support exchange of configuration data. For this usage, SCL files (SCD, ICD, CID) are
imported. The files are created, for example, with the
Features: DIGSI 4 System configurator.
Can be used for TM 1703 mic, TM 1703 emic, TM SICAM PAS CC as C&M system for IEC 61850
1703 ACP, and AK 1703 ACP devices, for example, SIPROTEC 4 and third-party
Can be used for several 1703 stations and devices.
supports the usage with redundant AK 1703 ACP.
Up to 8 SCL files can be imported. SCD files can
When using IEC 60870-5-104, a TOOLBOX II contain several devices. Communication with up to
project with several stations can be imported; for 500 devices is supported.
communication via IEC 61850, up to 8 TOOLBOX II The used license limits the number of supported
projects can be imported. information objects.
SICAM PAS CC can be used as a redundant SICAM PAS CC can be used as a redundant
system and as a Client/Server system. system and as a Client/Server system.
SICAM
PAS CC
V7.0 SP1
3rd party
IED
NEW NEW
With SICAM PAS CC V7.0 SP1, a common control and monitoring system for the systems SICAM PAS,
SICAM 1703 and for IEC 61850 devices can be realized.
The supported number of information objects limits the number of devices and systems.
(↔ licenses depending on number of information objects)
The usage of SICAM PAS CC V7.0 SP1 for the new target systems is supported from SIMATIC WinCC V7.0 and later.
Together with SIMATIC WinCC V7.0 SP2, the following operating systems are also supported:
Windows 7 (32 bit)
Windows 2008 Server SP2 (32 bit)
Ordering Data
For the usage as a control and monitoring system for SICAM 1703 systems, the same order numbers are used as for
the target system SICAM PAS. (independently from the used communication protocol IEC 60870-5-104 or IEC 61850)
For direct connection of IEC 61850 devices (importing SCD, ICD, and CID files), the following order number is
necessary additionally to the MLFB mentioned above:
www.siemens.com/energy © 2011