Professional Documents
Culture Documents
Datamine Command
Datamine Command
Datamine Command
abort-string-tracing ast Delete the string currently being digitized and exit string tracing mode.
add-attributes nat Add a new alpha or numeric attribute column to a data table in memory.
add-segment-to-string ass Add a new segment to the end of a selected string using various options.
addcolumn Add a new alpha or numeric column to a table that is loaded into memory.
adjust-string-in-ore adj Adjust a closed string to match the ore cell boundary defined by legend and ore/waste
parameters.
adjust-to-gradient atg Adjust a string to fit a gradient.
advanced-estimation Display a set of tools for advancved analysis and estimation of single or multivariate data.
als-coreviewer als Opens a new ALS CoreViewer™ portal to show detailed core information for the selected sample.
change-azi-by-neg-inc ca- Change the view azimuth by the negative of the increment specified in setup-azi-dip-increments.
change-azi-by-pos-inc ca+ Change the view azimuth by the increment specified in setup-azi-dip-increments.
change-dip-by-neg-inc cd- Change the view dip by the negative of the increment specified in setup-azi-dip-increments.
change-dip-by-pos-inc cd+ Change the view dip by the increment specified in setup-azi-dip-increments.
check-for-crossovers cxx Check strings for crossovers
check-link-selected-strings clss Check link crossovers on selected strings.
circle-by-three-points a3 Generate an arc defined by interactively selecting its end points and a third point which lies on
the arc.
circle-from-center-to-edge cec Generate a circle with a center point and a radius defined interactively.
circle-from-edge-to-edge cee Generate a circle by interactively defining two points which lie on its circumference. The two
points will be separated by a distance equal to the diameter of the circle.
circle-with-defined-radius cir Generate a circle from an interactively defined center point and a specified radius.
clip-inside-perimeter cip Delete point and string data lying outside a selected perimeter.
clip-outside-perimeter cop Delete point and string data lying inside a selected perimeter.
clip-to-perimeter ctp Delete point and string data lying inside or outside a selected perimeter.
close-all-strings cla Close all strings - make the last vertex coincident with the first vertex on all filtered strings.
connect-strings conn Connect two strings from the selected end-point of the first to the selected end-point of the
second to form a single longer string. The new string attributes will match the first string selected.
connect-strings-attrib cona Connect two strings from the selected end-point of the first to the selected end-point of the
second to form a single longer string
connection-on-grade cog Generate new 2 point string(s) from a selected location to points along a target string that have a
specified gradient.
converge-segments trc Remove unwanted string vertices by trimming string with a projected line along a selected
segment.
convert-wf-hull hts Convert the hull (silhouette) of a wireframe to a string.
convert-wframe-slice-sections Create multiple strings where a defined set of planes intersect a wireframe object.
convert-wireframe-slice-string css Interactively convert the intersection of a wireframe with the active section plane into strings.
create-shells csh Create isoshell wireframes from drillhole or point sample data to model grades or rock types.
create-tag-string tgs Create a tag string to force wireframe links to occur between specified points.
crosshair-switch tch Toggle crosshair display in the Design window.
cut-and-fill-volumes Generate solid wireframes and statistics about the volume between overlapping DTMs.
defdensity-switch pfd Toggle on or off the prompts for the default density each time an evaluation is performed.
delete-file dfi Delete the named Datamine files permanently from the project. Wildcard expressions can be
used.
delete-points-mode dpo Erase selected point data or points and string vertices by selecting them with the cursor.
displace-blast-points Calculate point data displacement using an alternative algorithm to the curve method for
calculating a blast.
displace-blast-strings Calculate string data displacement using an alternative algorithm to the curve method for
calculating a blast.
display-drillholes dh Regenerate the display of drillhole data in the graphics window.
display-eval-results-switch drs Toggle the display of evaluation results following evaluation processes.
display-wireframe dw Display the (filtered) wireframe models held in the wireframe files.
display-wireframe-in-order wfo Displays a wireframe in a sequence determined by a numeric field from the triangles file.
divide-string sdi Divide an outline (closed string) into two outlines by selecting two points on the closed string.
divide-wireframe-by-strings Split a wireframe into multiple parts using multiple selected strings.
drillhole-display-change tdhd Toggle on or off the display of drillhole data.
drillhole-display-hide Hide all drillhole objects data.
drillhole-display-show Display all drillhole objects data.
drillhole-tickmark-switch tsti Toggle the display of drillhole sample tick marks in the Design window.
drillhole-to-string d2s Convert a drillhole to a string.
dtm-create md Generate a DTM wireframe object from a set of string and or point data.
dtm-undo-last-link uld Undo the last DTM link.
dvp-implicit-surface-categorical-drillholes Use categorical sample values to create surfaces representing material type boundaries.
dvp-implicit-surface-continuous-drillholes Use continuous sample values to create surfaces such as grade shell boundaries.
dvp-wireframe-explicit-from-drillholes Advanced vein creation command with more options than vein-from-samples.
dynamic-evaluation-report Dynamic interactive evaluation of tonnes and grades within selected strings.
edit-attributes eat Edit the attributes of a selected object.
edit-coincident-points-switch ecp Edit/Move coincident string points on or off.
edit-dh-attributes ed Select a sample with the cursor and individually edit its sample values.
edit-hole-attribute- Edit the properties of a specific drillhole data column. Type the command followed by a field
name.
edit-model-cell-values ecv Edit the values of a single selected model cell.
edit-point-coordinate epc Edit the X
edit-wireframe-attributes ewa Edit the attribute values of a selected wireframe.
end-link eli Create a wireframe link within a (closed) string using Delauney tesselation.
end-link-boundary elb Create a wireframe link by closing an area defined by a perimeter and its associated
boundary/bridge string(s).
end-link-selected-strings Create a wireframe link within each of the selected strings using Delauney tesselation.
erase-point erp Deletes vertices (points) in any selected or non-selected string(s) or point(s) nearest to the cursor.
evaluate-1-string ev1 Evaluate model tonnes and grade in the volume defined by a single closed string by projecting it
up and down.
evaluate-2-strings ev2 Evaluate tonnes and grade in the volume defined by two strings.
evaluate-all-strings eva Evaluate all filtered strings by projecting them perpendicular to the view plane.
evaluate-all-strings-plane Evaluate all filtered strings by projecting them perpendicular to a plane calculated from their
vertices.
evaluate-current-wireframe Evaluate the current wireframe above and/or below the current specified limit.
evaluate-display-legend-switch Categorize the evaluation results using the legend items in the current block model display
legend.
evaluate-set-of-wireframes Evaluate a set of wireframes separating each one by specification of a Key field.
evaluate-wireframe evw Evaluation of tonnes and grades within selected wireframe.
evsource-blockmodel-switch umd Set whether to use the block model or drillhole data for evaluation.
evsource-drillhole-switch udd Turn on or off the use of drillholes in evaluations.
extend-string ext Extend a string by adding new points after its end point.
extend-string-to-string ess Extend a string from its end point
extrude-strings exs Create an open or closed wireframe surface
fillet-single-string-point ssp Fillet a selected string angle to a specified radius of curvature.
fillet-string-points spf Fillet all string angles to a specified radius of curvature.
fillet-string-points-berm spbf Specify the maximum curvature radius permitted between line segments on a selected berm.
filter-strings fs Filter string objects to restrict which records in their data tables gets displayed and used.
filter-wireframe-triangles fwt Filter wireframe objects to restrict which records in their data tables gets displayed and used.
fit-elevation fe Adjust the elevation values of a string by interpolating from values of other loaded string and
point data.
format3dobject fdd Display the Format Display dialog to edit Design window overlays.
formatlegends fdl Create and edit legends for display or evaluation purposes.
full-cell-evaluation-switch fce Turn on or off full cell evaluation of a block model.
gaussian-wireframe-from-points Create a surface from a point cloud.
generate-contours-from-holes-intercepts Generate elevation contours
generate-contours-from-points Generate contours
generate-distance-contours Generate contours and/or grid of closest 2D distance to sample points.
generate-outlines Generate closed outlines from a set of intersecting open and closed strings.
generate-outlines-attrib ou Generate closed outlines
get-all-strings ga Load all (filtered) strings from a named string file.
get-drillholes gd Read data from a drillhole file with optional Input filter.
get-points gp Get points into memory from a named points file.
get-view gvi Retrieve a set of view parameters from a loaded section definition table and rest the view
orientation.
get-wf-data gw Get data from supplied wireframe triangle and point files.
gradient-degrees-switch Set the gradient convention unit to degrees.
gradient-percent-switch Sets the gradient convention unit to percent.
gradient-positive-up-switch Toggle the gradient positive value convention (on = +ve up
gradient-ratio-switch Sets the gradient convention unit to ratio.
grid-dtms grd Create a grid of points to represent the elevation of points belonging to wireframe surfaces.
gvp-cells-update-switch tvumc Toggle on or off whether block model cells will be updated in the Visualizer window or when
transferring data from the Design window to the VR/3D window via update-VR-objects.
gvp-dhole-update-switch tvud Toggle on or off whether drillholes will be updated in the Visualizer window or when transferring
data from the Design window to the VR/3D window via update-VR-objects.
gvp-gouraud-switch tssh Toggle on or off smooth (Gouraud) shading in the Visualizer window or when transferring data
from the Design window to the VR/3D window via update-VR-objects.
gvp-hole-collar-bhid-switch Toggle on or off the display of BHID labels in the Visualizer window or when transferring data
from the Design window to the VR/3D window via update-VR-objects.
gvp-hole-end-bhid-switch Toggle on or off the display of BHID labels at the end of drillholes in the Visualizer window or
when transferring data from the Design window to the VR/3D window via update-VR-objects.
gvp-modelp-update-switch tvump Toggle on or off whether model planes will be updated in GVP or when transferring data from the
Design window to the VR/3D window via update-VR-objects.
gvp-modelpc-update-switch tvupc Toggle on or off whether the model cloud will be updated in GVP or when transferring data from
the Design window to the VR/3D window via update-VR-objects.
gvp-modelwf-update-switch tvumw Toggle on or off whether the model with wf will be updated in the Visualizer window or when
transferring data from the Design window to the VR/3D window via update-VR-objects.
gvp-point-annot-update-switch tvua Toggle point annotation in the Visualizer window or when transferring data from the Design
window to the VR/3D window via update-VR-objects.
gvp-point-update-switch tvupo Toggle on or off whether point data will be updated in the Visualizer window or when transferring
data from the Design window to the VR/3D window via update-VR-objects.
gvp-string-update-switch tvus Toggle on or off whether string data will be updated in the Visualizer window or when transferring
data from the Design window to the VR/3D window via update-VR-objects.
gvp-unload-planes-switch tvun Control whether previously loaded planes are removed on updating the Visualizer window or
when transferring data from the Design window to the VR/3D window via update-VR-objects.
gvp-wf-update-switch tvuw Toggle on or off whether wireframe data will be updated in the Visualizer window or when
transferring data from the Design window to the VR/3D window via update-VR-objects.
hide-non-selected-drillholes hnsd Show only the selected drillholes and filter all non selected drillholes to be hidden.
hide-non-selected-strings hnss Show only the selected strings and filter all non selected strings to be hidden.
hole-report Creates a hole summary of any dynamic drillholes loaded.
ignore-clipping-switch tcl Set per view. Ignores any clipping set in the 3D/VR sections. Only supported in 3D/VR views.
insert-line ils Replace string vertices with a new line or set of points between selected start and end points.
insert-near-points inp Insert new string points where edges are close to existing points.
insert-offsets iof Insert a series of strings within a closed boundary.
insert-point-segment-center ipsc Insert point at the center of a string segment.
insert-points-mode ipo Insert new points into a string using the cursor.
insert-wireframe-point iwp Insert new point into a wireframe.
interactive-dh-editor de Display the Drillhole Editor for viewing
intersect-drillholes-wireframes idw Generate a table of points located at the intersection of drillholes with wireframes.
keep-combined-switch ko Turn on or off whether strings used for combining are retained.
legend-switch sleg Show or hide the legend preview panel and fill code assignments.
link-3dsolid-align-switch Toggle the automatic creation of virtual tag lines.
link-3dsolid-collate-switch Toggle on or off the grouping of string data when using link-multiple-strings.
link-3dsolid-end-link-switch Toggle on or off automatic end-linking when using link-multiple-strings.
link-3dsolid-interp-switch Toggle On/Off the Uniform Interpolation option applied when using link-multiple-strings.
link-3dsolid-method-switch l3s Turn on 3DSolid linking when using the link-multiple-strings command.
link-3dsolid-view-plane-switch Toggle the sorting of strings (distance from view) prior to linking with link-multiple-strings.
link-area-method-switch tma Select minimum surface area as the string linking criteria.
link-boundary lbo Create a wireframe link between two perimeters honouring boundary/bridge strings.
link-boundary-to-line lbl Create a wireframe link between a perimeter and a string.
link-complete-drive ldr Create a drive wireframe co-axially around a drive control string.
link-crossover-switch tlc Toggle crossover checking on or off for string linking.
link-multiple-strings lms Create wireframe volumes by automatically linking a sequence of perimeters in order.
link-outline-pair l2 Link pairs of closed strings to form closed wireframe surfaces.
link-outline-pair-attribute l3o Link multiple strings with a common attribute automatically.
link-quad lq Create a wireframe link using points on selected segments of two strings.
link-radii-method-switch tea Select equi-angular shape as the string linking criteria.
link-selected-outlines Create a wireframe from a drive outline string and supplied height.
link-selected-string-el-switch Enable or disable auto endlinking when linking strings.
link-selected-strings-attrib lma Link selected strings to form a solid wireframe after sorting on a specified numeric attribute.
link-selected-strings-plane lmpl Link selected strings in plane order to automatically form a solid wireframe.
link-selected-strings-point lmpp Links strings to form a solid wireframe
link-shape-method-switch tpr Select proportional length as the string linking criteria.
link-strings ls Link strings together to form a wireframe surface.
link-to-line ll Create a wireframe link between a perimeter and an open string.
linking-method-switch tlm Toggle between optimal and sub-optimal (fast) linking methods.
load-from-datasource Load data using the Data Import dialog.
load-wf-from-datasource Load data using the Data Import dialog.
loadfromproject Load data from a file that is in the current Studio project into memory.
loadholesfromproject Load drillhole data using the Project Browser dialog.
loadmodelfromproject Load model data using the Project Browser dialog.
loadpointsfromproject Load points data using the Project Browser dialog.
loadstringsfromproject Load string data from a string file that is in the current Studio project into memory.
lock-bhole-plane-switch lh Toggle whether blast holes are maintained on their original plane during move commands.
merge-string-segments mrs Connect the selected string segments in the current string object which have coincident end
points.
merge-string-segments-attrib Connect the selected string segments in the current string object which have coincident end
points
merge-strings-to-object msto Copy/merge all selected strings into the current strings object.
mineable-shape-optimizer mso Compute the optimal size
mineable-shape-optimizer-v3 Compute the optimal size
mirror-string smm Mirror string data about a defined plane.
model-from-multiple-wireframes mfw Generate a composite block model using one or more wireframes.
model-plane-change tbm Show/Hide all block model objects data.
model-plane-hide Hide all displayed block model data.
model-plane-show Show all displayed block model data.
model-wf-display-switch tmw Toggles automatic cell model display with current wireframe.
move-blasthole mbl Move a blast drillhole interactively.
move-blasthole-row mbr Move a row of drillholes created with the blast-layout command.
move-clip-section-backward msb Moves the current section plane backward by a distance equal to the current section width.
move-clip-section-forward msf Moves the current section plane forward by a distance equal to the current section width.
move-drillhole-toe mto Modify the toe position of a selected drillhole using the mouse.
move-plane mpl Move the section plane by a specified amount.
move-plane-backward mpb Move the section plane forward by an amount equal to its defined total width.
move-plane-forward mpf Move the section plane back by an amount equal to its defined total width.
move-points-mode mpo Move string vertices or point data.
move-string mo Move string interactively to a new location.
move-string-section mss Move a section of a string between two vertices to another location.
move-strings2d mstr Interactively rotate
move-wireframe mw Move wireframe interactively using the cursor to specify a new location.
move-wireframe-point mpw Interactively move points in a wireframe.
mro Identify envelopes of economically mineable blocks in a block model.
new-points npo Digitise new point data using the cursor.
new-polygon npy Create a new closed string (polygon).
new-string ns Digitise new string points using the cursor.
new-string-attribs-snap-switch asw When digitizing the first point of a new string
new-triangle ntr Create a new closed string (polygon) by clicking in at least 3 locations.
offset-inside-string ois Create a new string/perimeter inside the selected string/perimeter.
offset-outside-string oos Create a new string/perimeter outside the selected string/perimeter.
offset-string exp Create a new string/perimeter by offsetting the selected string/perimeter.
open-all-strings oa Open all strings.
open-background-image oim Open an image to be displayed in the background of the Design Window.
open-file of Open a named file in your application.
open-model-file om Open a block model file.
open-results-file ore Open an evaluation results file.
open-rosette-file oro Opens a rosette file for open pit design. Only one rosette file can be open at a time.
open-section-file ose Open a section definition file.
open-string ost Delete the last vertex of a string if it is coincident with the first vertex.
open-validation-file ova Open a validation file.
open-visualiser-window vo Activate the Visualizer window.
outl-plane-switch ftp Control whether new outlines are generated on the current view plane.
outline-batch-switch trs Toggle whether outlines are generated automatically or after string selection.
outline-inside-switch-off Turns off the option to include an INSIDE column in the outlines created by generate-outlines.
outline-inside-switch-on Turns on the option to include an INSIDE column in the outlines created by generate-outlines.
This column will contain a 1 for internal boundaries
outline-selection-switch tsin Toggle for individual selection of new outlines.
outline-storage-switch tsif Toggle whether new outlines replace strings in the original strings object or create a new strings
object.
pan-down-graphics Move the view upwards.
pan-graphics pan Move the view
pan-left-graphics Move the view towards the right.
pan-right-graphics Move the view towards the left.
pan-up-graphics Move the view downwards.
perimeter-selection-switch pes Toggle to control how boundary strings are selected in relation to a mouse-click.
perspective-view-switch psp Switches between perspective and non-perspective projection (3D/VR window only)
plane-by-one-point 1 Define the active section using a single selected point.
plane-by-three-points 3 Define active section orientation using two selected points to define a line.
plane-by-two-points 2 Set the active section orientation by specifying three points on its plane.
plane-display-change Toggle on or off the display of planes data.
plane-display-hide Hide all planes objects data.
plane-display-show Show all planes objects data.
point-display-change spo Show/Hide all points objects data.
point-display-hide Hide all points objects data.
point-display-show Show all points objects data.
polygon-intersection plyi Create a new polygon which contains the area common to all selected polygons.
polygon-intersection-delete-originals Delete original polygon data after running polygon-intersection.
polygon-union plyu Creates a new polygon which contains the area inside all overlapping polygons.
polygon-union-delete-originals Delete original polygon data after running polygon-union.
presplit-layout lp Layout a presplit line of holes within a perimeter.
progress-monitor-switch pmo Toggle the use of the progress monitor when running commands.
project-points-to-wf ptp Project point data to a wireframe surface.
project-points-to-wf-angle pta Project selected points onto a wireframe surface by projecting at a specified angle.
project-points-to-wf-in-view pti Project selected points onto a wireframe surface in a direction along the view direction.
project-string-at-angle pro Create a new string by projecting an existing string segments up or down a specified distance and
face angle.
project-string-onto-wf ptw Project a string vertically up or down
project-string-onto-wf-in-view ptd Project a string along the line perpendicular to the (view) plane onto a visible wireframe surface.
quick-color-all qca Launches the Quick Color dialog to apply a specified color or legend to selected overlays.
quick-color-drillholes qcd Launches the Quick Color dialog to apply a specified legend to selected drillhole overlays.
quick-color-models qcm Launches the Quick Color dialog to apply a specified legend to selected model overlays.
quick-color-planes qcl Launches the Quick Color dialog to apply a specified legend to selected planes overlays.
quick-color-points qcp Launches the Quick Color dialog to apply a specified legend to selected points overlays.
quick-color-strings qcs Launches the Quick Color dialog to apply a specified legend to selected strings overlays.
quick-color-wireframes qcw Launches the Quick Color dialog to apply a specified legend to selected wireframe overlays.
rapid-digitize-switch rap Duplicate string segments of original string during new-string or extend-string.
read-visualiser-view rvv Read the azimuth and dip of the current visualizer view and apply them to the current view.
read-vr-view rvr Read the 3D View settings and adjust the Design View.
rectangle-from-center-to-corner rcec Generate a rectangular string by interactively defining its center and one of its corners.
rectangle-from-corner-to-corner rcce Generate a rectangular string by interactively defining its opposing corners.
redraw-display rd Redraw the contents of the design window.
redraw-strings-in-order rso Redraw the strings in the Design View in the order specified by an attribute.
reduce-points red Reduce the number of points in a string by the defined percentage.
reduction-percentage pre Set the percentage reduction for use in point reduction.
reference-points drp Define reference points for an external 2D digitizing device.
remove-string-crossovers tcr Remove string crossovers in the current view plane.
rename-drillhole rnd Select a drillhole and rename its unique identifier value (Normally the BHID column).
reposition-sirotiff rst Reposition a SiroTIFF file in the X
reset-view rvi Reset the Design window view (only) using previously saved view parameters.
resolve-string-points resp Moves points on a string onto points of another string within a defined tolerance.
reverse-string rev Reverse the selected string vertex order.
reverse-view vwr Reverse the current view direction.
rotate-string rst Interactively rotate selected string(s) about a selected point.
rotate-string-by-angle rsn Rotate string by a specified angle.
rotate-string-to-azimuth rsa Rotate string to a specified azimuth.
rotate-wireframe row Rotate wireframe about a specified point by specifying X
save-view svi Save View Plane Section to a Section table in memory.
scale-wireframe Scale wireframe around a specified point by entering X
select-all-drillholes sad Add all drillholes to the selected data set.
select-all-planes san Add all planes to the selected set.
select-all-points sap Add all points to the selected data set.
select-all-strings sas Add all strings to the selected data set.
select-cross-section scs Select drive cross-sections for underground mine design.
select-drillhole-data-off Turn Off the inclusion of drillhole data during data selection commands.
select-drillhole-data-on Turn On the inclusion of drillhole data during data selection commands.
select-drillhole-data-switch sdd Toggles the inclusion/exclusion of drillholes data during data selection commands.
select-model-data-off Turn Off the inclusion of block model data during data selection commands.
select-model-data-on Turn On the inclusion of block model data during data selection commands.
select-model-data-switch Toggles the inclusion/exclusion of block model data during data selection commands.
select-string-depth Select/deselect strings for further operations. Single-clicking cycles through nearby strings in
screen depth order.
select-wireframe sw Select the current wireframe group and surface prior to linking.
select-wireframe-data-off Turn off the inclusion of wireframe data during data selection commands.
select-wireframe-data-on Turn on the inclusion of wireframe data during data selection commands.
select-wireframe-data-switch Toggles the inclusion/exclusion of wireframe data during data selection commands.
sequence-numbers seqn Calculate a sequence number for a set of outlines base on their spatial location to a centre line
string.
set-adjustment-cut-off scu Set grade field and cut-off grade for adjusting a string to an ore boundary when using adjust-
string-in-ore.
set-adjustment-method-switch am Toggle between using the cut-off grade or legend items methods when using adjust-string-in-ore.
set-clipping scl Define view clipping parameters for the Design window.
set-design-parameter Used to set other design parameters.
set-dhevaluation sep Modify parameters for compositing and/or evaluation of drillholes.
set-face-angle fng Set the string projection angle i.e. face angle
set-field-output-status Write an attribute field to a file type.
set-gradient-convention grc Set the gradient convention to percent
set-move-along-plane-switch When moving points etc in the VR/3D view
set-move-along-screen-switch When moving points etc in the VR/3D view
set-near-far Set near (out of screen) and far (into screen) clipping limits.
set-ore-categories soc Define the selected evaluation legend categories as ore or waste.
set-projection-distance prj Set the distance that a string will be projected when project-string-at-angle is used.
set-scale-factor sex Set the Design Window view exaggeration in X
set-secondary-clipping Set secondary view clipping parameters.
set-snap-grid-parameters gs Set the grid snapping parameters.
set-snap-grid-switch stg Set snap mode to snap to grids.
set-snap-lines-switch stl Set snap mode to snap to object lines.
set-snap-mode snm Enable snapping to the grid during data selection and digitizing.
set-snap-none-switch sn0 Disable the use of snapping during data selection and digitizing operations.
set-snap-points-switch stpo Set snap mode to snap to object points.
set-snap-surface-switch Set snap mode to snap to object surfaces.
set-step-distance ssd Set the step distance for string adjustment when outlining ore using adjust-string-in-ore.
set-to-previous-view pv Change the view to the previous view orientation in the Design window.
set-tolerance sto Set matching tolerance for points to be used in the DTM.
set-view-fov Displays a dialog to set the VR/3D window field of view for the active view.
set-view-interactive vi Display the View Settings dialog to define the current Design window section.
setup-azi-dip-increments incs Define the define increments used in Underground Blast Design.
show-background-image-switch Turn on or off the display of background images in the Design Window.
show-current-files cf Open the Project Browser to select a data file for loading.
show-current-loaded-files sfs Open the Data Object Manager to manage loaded data objects.
show-samples Interactively select model blocks to shows the samples (from a sampout file) used to estimate
it. (Parent cell estimation)
show-samples-subcells Interactively select model blocks to shows the samples (from a sampout file) used to estimate
it. (Subcell estimation)
slice-wireframe slw Display a temporary line at the intersection of the current wireframe and the Design window's
viewplane.
smooth-gradient smg Smooth part of a string to a consistent gradient.
smooth-string sms Smooth a string by parabolic blending to insert new points between existing pairs of points.
square-from-center-to-corner stc Generate a square string by interactively defining its center point and one of its corners.
square-from-center-to-edge sce Generate a square string by interactively defining its center point and a point on its edge.
square-from-corner-to-corner scc Generate a square string by interactively defining diagonally opposed corners.
square-from-edge-to-edge see Generate a square string by interactively defining points on opposing edges.
status-panel-switch tsp Toggles status panel display in Design Window when the application is started up.
string-display-change dst Show/Hide all strings objects data.
string-display-hide Hide all strings objects data.
string-display-show Show all strings objects data.
string-to-drillhole stdh Convert selected string to a drillhole in the current drillhole object.
string-to-plane cstp Create plane data based on the vertices of a selected string object.
string-to-road stro Create a road outline from a selected single road design string.
string-trace stra Generate a new string from intersecting portions of strings that are selected interactively.
uniform-conditioning Use Uniform Conditioning to investigate recoverable reserves at alternative Selective Mining
Unit sizes.
unlink-triangle utr Interactively erase wireframe triangle data from the current wireframe.
unlink-wireframe uw Erase a selected wireframe link from the wireframe.
unload-all-data ua Unload all the currently loaded data from memory.
unsuperimpose-plot unpl Remove a superimposed plot file.
update-vr-objects vro Update the VR/3D window with the settings and objects displayed in the Design Window.
update-vr-objects-only Update the VR/3D window according to the status of objects in the Design window.
update-vr-view vrv Update the VR/3D View to reflect the view orientation in the Design Window.
use-clipping-switch uc Turn on or off data clipping limits in the Design window.
use-modelfile-switch tum Toggle the use of the loaded model slope angle and berm width values when projecting strings.
vein-from-samples Create a vein hanging wall and footwall surface from a set of selected drillhole samples.
vertical-length-switch plv Control whether the HLENGTH field in a blast patterns file is an actual or vertical length.
view-by-one-point v1 Set VR/3D view position and orientation based on a selected point and orientation.
view-by-three-points v3 Set VR/3D view position and orientation based on three selected points.
view-by-two-points v2 Set VR/3D view position and orientation based on two selected points and orientation.
view-to-plot vf Change the current Design view to that of a selected plot file.
viewset (Scripts only) set the section definition and rotate the view.
vr-to-plot-create vrpc Create a new plot sheet based on the contents of the 3D/VR/3D window.
vr-to-plot-overlays vrpo Convert existing VR/3D overlays to plot sheet overlay.
vr-to-plot-section vrps Convert existing VR/3D view to a plot section.
vr-to-plot-view vrpv Convert existing VR/3D view to a plot sheet projection.
wf-attr-from-str-switch tsa Toggle the source of wireframe attributes between strings and the user.
wf-boundary-line-switch twvb Toggle the display of wireframe open edges on or off during verify.
wf-convert-line-switch twcl Toggle the conversion of displayed lines to strings in wireframe verify.
wf-display-change twd Show/Hide all wireframe objects data.
wf-display-hide Hide all wireframe objects data.
wf-display-show Show all wireframe objects data.
wf-intersection-switch tiw Toggle whether the projection of string points stops at a wireframe.
wf-intersections sfi Create new strings from the intersections between two wireframes.
wf-select-attribute-switch sba Control the selection of wireframe data by user attributes.
wf-select-file-switch sbfi Control the selection of wireframe data by file names.
wf-select-filter-switch sbfl Control the selection of wireframe data by user defined filters.
wf-select-group-switch sbg Control the selection of wireframe data by picked wireframe group.
wf-select-surface-switch sbs Control the selection of wireframe data by picked wireframe surface.
wireframe-between-surfaces-intersecting Generate solid wireframes in the space between intersecting DTMs.
wireframe-clean wcl Clean a wireframe by removing common errors
wireframe-create-from-points cwp Create a wireframe volume from a point data cloud.
wireframe-decimate Reduce the number of points in a wireframe by reducing the number of edge and wireframe
faces.
wireframe-difference wdi Create a wireframe object representing the unique aspects of two other wireframes.
wireframe-dynamic-evaluation wde Dynamic interactive evaluation of tonnes and grades within selected wireframes.
wireframe-extract-separate wes Create separate wireframes for each logically discrete piece of two wireframes.
wireframe-intersection win Create a new wireframe from the common volume enclosed by two wireframes.
wireframe-merge wme Create separate wireframes for each logically discrete piece of two wireframes.
wireframe-section csl Create a cross section string of the wireframe where it intersects a plane.
wireframe-section-multiple msl Create multiple strings where a defined set of planes intersect a wireframe object.
wireframe-smooth wfs Add more points to a wireframe surface to create a more rounded structure.
wireframe-solid-hull soh Create a single shell around multiple overlapping surfaces.
wireframe-split spli Split a solid wireframe into two parts using a plane.
wireframe-split-by-surface spbd Split a solid wireframe using a DTM.
wireframe-split-multiple Split a solid wireframe object into multiple parts using a plane.
wireframe-split-string spbs Split a wireframe into two or more parts using a selected string.
wireframe-surface-merge udt Create a new DTM by modifying a DTM using the surface of a second DTM.
wireframe-surface-merge-intersecting Create a new DTM by modifying a DTM using the surface of a second DTM
wireframe-surface-project pdv Project the boundary of the selected DTM to a specified plane.
wireframe-under-surface wus Generates a closed solid between an upper DTM (e.g. topo) and lower DTM (e.g. pit shell).
wireframe-under-surface-intersecting Generates a closed solid between an upper DTM (e.g. topo) and lower DTM (e.g. pit shell). The
DTMS must completely intersect.
wireframe-union wun Create a new single wireframe representing the union of two input wireframes.
wireframe-verify wvf Verify the integrity of a surface and detect and automatically fix errors where possible.
wireframe-volume wvo Report the volume of a wireframe
write-all-strings wa Save all loaded string data to a Datamine file.
write-drillholes wdh Save loaded static drillholes table to a Datamine file.
write-points wp Save loaded point data to a Datamine file.
write-selected-drillholes wrd Save selected drillhole data to a Datamine file.
write-selected-strings wrs Save selected string data to a Datamine file.
write-single-drillhole wds Save a single drillhole to a Datamine file.
write-single-string ws Save a single string to a Datamine file.
write-wf-data ww Save loaded wireframes to Datamine point and triangle files.
zoom-all-extents ze Resets the view limits to show all data
zoom-all-graphics za Resets the position and extents of the view plane to show all displayed data.
zoom-graphics zx Zooms the view in to the selected area.
zoom-out zz Zoom out from the current view.
ACCMLT Accumulate sub-totals for up to 25 numeric fields
ADDDD Add new alpha or numeric fields to an existing file
ADDMOD Add two models with the same Data Definition together by superimposing the second one onto
the first.
ADDTRI Append two sets of wireframe files together to create a single set of wireframe files.
AED Legacy Datamine file editor.
ALFNUM Copy a file while converting given alphanumeric fields to numeric.
ANISOANG Calculate dip and dip direction angles from string/wireframe data.
ANOVA1 Carry out one-way analysis of variance on groups of replicate values of a numeric field in a file.
APPEND Append two or more files to create a new file containing the records of all the input files.
APTOTRUE Convert values in a file from apparent dip angle to true dip angle. Used in dynamic anisotropy.
ASTRAN Read one or more ASCII sample assay files in SIF format and updates a DATAMINE database file
by matching sample numbers.
ATTCHK Check the legend definition file prior to running ATTSET.
ATTSET Set the values of nominated attribute fields in a file based on the values of a given data field in
the input file.
AUTOCR Calculate the auto correlation function R-L of a single field against sample distance or lag.
CANON Define possible mineralized and background samples by the calculation of canonical vectors and
scores on the basis of two variates.
CDTRAN Carry out a simple translation and/or rotation on X
CELLCONF Create a summary table and graph of confidence for parent cells in a conditionally simulated
model.
CHART Transform data into a suitable format for creating charts.
CHECKIT Carry out validation checks on string data
CHKTRI Check wireframe point and triangle files.
CLOSEPTS find-closely-spaced-points
CLUSTR R-Mode hierarchical cluster analysis (Agglomerative) with a choice of correlation matrices.
COGTRI Add the centre of gravity coordinates and optionally the vertex coordinates of each triangle to a
wireframe triangle file.
COKRIG Multivariate-Kriging
COMBMOD Combine up to 20 block models that may have different parent cells sizes
COMPBE Composite desurveyed drillhole sample values over horizontal benches.
COMPBR Composite desurveyed drillhole sample data over horizontal benches
COMPDH Composite drillhole sample data values down each hole at a specified interval.
COMPEV Design and evaluate a composite in a blast.
COMPSE Composite drillhole data by optimizing the composite interval using ore and waste criteria.
COPYNR Copy a file adding a record number field RECORDNO. A base value and increment can optionally
be specified.
CORREL Calculate bivariate statistics on pairs of numeric fields in a file.
COUNT Count the number of records in a file that have the same value of up to 10 sorted Keyfields.
COZONE Investigate the relationship between mining parameters and the rocktype composition of each
mining volume
CRSCOR Cross correlation analysis to quantify and define anomalous thresholds and halo size on
regularly gridded soil sample lines.
CSMODEL Create an output model
CSOWOPT Identify ore and waste blocks in a conditionally simulated model by minimizing the cost of
incorrectly classifying ore as waste or waste as ore.
DDCOPY Copy just the Data Definition of a file to a new file (create a new file with no records).
DDLIST Display the Data Definition (DD) of a file: its field names
DECILE Perform a decile analysis of a set of sample data
DECLUST Decluster a set of sample data.
DECODE Decode a named field in the input file using a dictionary file.
DELETE Delete a Datamine file
DESURV Convert a set of sample
DIFFRN Delete records from the first input file if they match the specified keyfield values in the second
input file.
DILUTE Extend drillhole seam intersection data to allow for dilution above and below seams.
DILUTMOD Dilute the grades in a parent cell block model by a user defined dilution width. Grades are
adjusted in cells which have adjacent cells of a different rock type.
DISCAN Establish a set of rules using geological control groups which can then be applied to the
classification of unknown samples using the DISCLA process.
DISCLA Multiple discriminant classification of unknown samples into groups using the discriminant
functions and group centroids calculated in the DISCAN process.
DISPLA Display a Datamine plot file in the Studio graphics window.
DMEDIT Basic in-place file editing
DMFD Output a block model in a format suitable for input to Whittle FOUR-D.
DTMCUT Create a cut and fill model and report between two wireframe surfaces.
DTMMOD Model cut and fill volumes
DXFOUT Output a datamine database plotfile to an external system file in DXF format.
ELLIPSE Create a wireframe ellipsoid corresponding to Estimation parameters to visually verify search
volumes.
ENGLOG Translate coded drillhole logs though a dictionary file into readable English equivalents.
ENVSEQ Create an extraction sequence for the envelopes generated by the MODENV process.
ESTIMA Studio process for estimating grades into a model (Used within Advance Interpolation
command).
ESTIMATE Estimate grades into a block model with a wide range of available options.
EXPFLD Add records to a file so that a record is output for given increments of a start field until an end
field value is reached.
EXPMMW Expand a set of planar perimeters according to a user defined minimum mining width and
create their centre lines.
EXPNDMOD Expand a model to cover a larger volume and fill it with cells. The volume can optionally be
defined and constrained by input wireframe surfaces or perimeters.
EXPORT Export data using a specified Data Source Driver.
EXTEND Extends an existing file with data entered in free format.
EXTNDF Extends an existing file with data entered in fixed format.
EXTRA Create and modify values in a file using mathematical and algebraic expressions.
FACTOR Define a number of factors from the common inter-correlation between variables using the
correlation (R) matrix.
FDIN Create a Datamine model file from a Whittle FOUR-D results file.
FDOUT Output a Datamine model file in Whittle FOUR-D format.
FFUNC Estimate the variance of a point in a block.
FILCOM Convert all explicit fields with a constant value to implicit fields.
FILEXP Convert all implicit fields in a file to be explicit.
FILTPO Filter coincident or adjacent points from an input file
FORMAT Generate a tabulated report for output to the screen or to a system file.
FXIN Input FOUR-X results file.
FXOUT Output a model to Whittle FOUR-X format.
GAUSAN Perform a gaussian anamorphose transformation on a set of sample data.
GAUSANAM Transform a non-Gaussian distribution into a Gaussian distribution. Used as part of Uniform
Conditioning.
GENTRA Transform data fields using one or more standard transformation functions.
GRADE Interpolate grades into a block model using basic methods.
GRIDDC optimize-decluster-grid-size
GRTON Calculate grades and tonnages using results from GAUSAN.
HELP Display the online help system for your application (add a command name to show context
help).
HISFIT Perform interactive histogram least-square distribution fitting.
HISTOG Generate a frequency histogram and a cumulative frequency histogram for any numeric field.
INDATA Enter CSV data either from the keyboard or from an external CSV file using a matching
Datamine Data Definition (DD) file.
INDEST Use the IE method to estimate grades into a block model using the CDF of indicator transformed
sample grades.
INPDDF Convert data definition and regular space separated output file produced by the OUTPUT
process to a Datamine file.
INPFIL Specify a Data Definition (DD) to create a new file and enter CSV data from the keyboard or an
external file to populate it.
INPFML Specify a Data Definition (DD) to create a new file and enter fixed format data from the
keyboard or an external file to populate it.
INPUTC Input text records from either a text file or the keyboard to create a Datamine file.
INPUTD Create a file containing a Data Definition only by specifying its field names
INPUTW Enter fixed format data from the keyboard or a text file into a Datamine file using an existing
Datamine Data Definition file.
IPDNNEST Interpolate grades into a block model using basic methods.
IPDNPG Interpolate grades into block model cells using non-parametric methods.
ISOHOL Generate a plot file showing an isometric view of drillholes.
ISOMET Generate a plot file of an isometric view of a wireframe surface of a block model.
ISOPER Generate an isometric view of perimeters and strings.
ISOTRI Generate a plot file of an isometric view of a wireframe model.
JOIN Join two sorted files on one or more keyfields.
KNA Calculates grade estimation statistics over a range of test parameters for use in Kriging
neighbourhood analysis.
LAYOUT Construct a blast hole layout within a blast area.
LINK Link a Datamine file outside the project folder to a file inside the project folder (macro only).
LINK3D Define
LINKPE Link perimeters to form wireframe models.
LIST Display a Datamine file in a standard format in the output window.
LISTC Display a Datamine file in a standard format in the output window.
LISTDR Display a list of all Datamine files and their physical locations that are in the Datamine project.
LOADCF Convert a Studio macro file (.mac) to a compressed Studio menu file (.men).
LUNICOND Perform localized uniform conditioning on a panel model.
MACEND Stop interactive process storage to a Studio macro file.
MACST Run a Datamine Studio macro.
MANOVA Perform multivariate analysis of variance for an unbalanced and balanced design.
MDTRAN Transform and rotate a block model onto a new prototype.
MENU Run a Datamine Studio menu.
MGSORT Sort file in ascending or descending order on multiple keyfields.
MIKSCELL Convert an MIK model into a model that is suitable for input to NPV Scheduler.
MINEWD Create LG 'Additional Arcs' for mining width.
MINLAY Launch the Interactive Mine Design Layout process.
MINWID Composite drillhole data into ore and waste intervals.
MINZON Investigate the relationship between mining parameters.
MOD2BLKS Create mining blocks
MOD2XYZ Assign point data with values from a block model.
MODCONF Calculate the confidence of the tonnage and grade resource estimates of a block model.
MODSPLIT Splits a Datamine model using an input wireframe to create a new model that is constrained by
the wireframe.
MODTRA Create trace lines through a model containing the model attribute values.
MODTRI Convert the visible faces of a sub-cell block model to wireframe surfaces.
MONACO Generate a table of random numbers with a specified number of records using a choice of
distributions.
NOMENU Check the syntax of the currently established menu.
NOXRUN Validate the syntax of a macro(s) or menu(s) in a character format system file.
NSCORE Transform a set of data to a normal distribution.
NSMODBAK Back-transform normal score variograms.
NSTRANS Transform a set of data to a normal score distribution.
ORIGIN Calculate the origin and extent of a rotated model.
OUTPUT Save a Datamine format file to text format as either space (regular columns) or comma
separated.
PANELEST Estimate the grade and variance of 2D and 3D panels.
PANELK Estimate the average value and the estimation variance of irregular shaped 2-D panels.
PAUSE Pauses for a time proportional to the @DELAY parameter (macro only).
PCA Group fields together into components on the basis of the correlation (R) or
variance/covariance (C) matrix.
PDRIVE Send a Datamine plot file to the plotter.
PERDTM Create 3D perimeters by projecting 2D perimeters onto a DTM surface.
PERFIL Fill perimeters with cells and sub-cells.
PEROPN Open or close all perimeters in the specified input file.
PERTAG Update the TAGs in a perimeter and a TAG file.
PERTRA Generate perimeters in planes across other perimeters.
PICDIR Create a file catalog file by supplying matching pattern expressions.
PICFLD Write field names to an output file if the fields in the input file match pattern expressions.
PICREC Copy records in a Datamine file where the record matches filters.
PICTED Display and edit Datamine plot files to produce composite plots.
PITMOD Report reserves within a pit by defining bench height and key fields.
PITRES Tabulate reserves in a RESULTS file.
PLOTAN Generate a scatter plot file
PLOTAR Generates a scatter plot file where each data point is annotated with an arrow.
PLOTCN Generate spline contours in plan or orthogonal sections.
PLOTCX Spline contouring in plan
PLOTDA Generate a scatter plot file where each data point has a symbol centre.
PLOTFR Generate a frame plot
PLOTFT Generates a frame plot
PLOTFX Generates a frame plot consisting of a frame
PLOTGR Generate a plotted grid
PLOTHI Generate a bar chart or histogram plot file.
PLOTLI Generate a line plot file.
PLOTLN Generate a line plot file from line segments.
PLOTMX Plot the intersection of a block model with any plane.
PLOTPA Plot all perimeters in a standard perimeter file.
PLOTPE Generate a plot file of perimeters.
PLOTPI Process to plot multiple numeric data variables as colored sectors.
PLOTPX Access enhanced perimeter plotting functions.
PLOTSI Generate a scatter plot with optional annotation of the selected data fields.
PLOTSK Create an annotated section plot through drillholes.
PLOTSX Perform enhanced plotting of drill hole sections and level plans.
PLOTTI Generate a plot file containing a plot title.
PLOTTR Generate a plan projection of the linkages in a wireframe model.
PLOTTX Generate a plot from a text file.
PLOTVA Generates a multi-value scatter plot file.
PLOTWS Generate a section plot in any direction through a wireframe model.
PLTABL Generate a tabulated report on the plotter.
PLTLAY Access an interactive graphics plot editing and layout process.
POLREG Calculate polynomial regression as Y estimates for X values up to the 5th order.
POLYDC Obtain a more representative set of samples by calculating declustered weights using the
polyhedra method.
PPQQPLOT Calculate and display PP (probability-probability) and QQ (quantile-quantile) plots.
PROMOD Optimize the number of sub-cells in a block model.
PROPER Check strings in a file for crossovers
PROTOM Generate a prototype model definition by specifying the mineral deposit limits.
PROTOP Create a prototype plot file with defined plot and data area shape/size.
PTCLDWF Generate a wireframe surface from a cloud of points containing X
QNLM Group samples using euclidian distance to calculate a dissimilarity matrix.
QUANTILE Quantile analysis of a set of sample data.
QUICKEST basic-quick-grade-interpolation
QUIG Generate a number of different types of plot with full auto-scaling.
RANK Rank values of a given numeric or alphanumeric field in a file.
REBLOCK Reblocks a block model to a new a parent size
RECCOP Copy a group of records from one file to another.
REGMOD Produce a regular parent cell model from an input model
REGMOW Produce a regular cell model for pit optimization.
RENAME Rename a Datamine file.
REPORK General tabulating report generator with provision for separate keyfield sections.
REPORT Generate a tabulated report to custom requirements.
RESCAT Define reserve categories in terms of the distance of the nearest sample from the centre of a
cell.
RESTRI Copy records from the first input file where keyfield values match with the second input file.
RNLM R - mode non linear mappingusing angular distances from the Pearsson correlation coefficient
matrix.
ROTORDER rotation-axis-order-converter
SCREEN Formatted screen command for menu and macro interaction.
SCREND Clear the screen and erase the history of SCREEN commands.
SCRFMT Format text using format controls defined in the SCREEN command.
SECDEF Create a section definition file.
SELCOP Selectively copy named fields from a file to another file.
SELDEL Selectively delete named fields from a file.
SELEXY Selectively copy records for which X and Y coordinate values lie within a perimeter defined in a
perimeter file.
SELPER Select records which lie on or within a perimeter and copy them to an output file.
SELTR2 Select data relative to a wireframe.
SELTRI Select records lying inside/outside wireframe models or above/below triangulated surfaces.
SGSIM Create a regular grid of conditionally-simulated points using sequential Gaussian simulation.
SLIMOD Put model onto a new prototype definition by splitting at new cell boundaries and recalculating
IJK value.
SLIPER Intersect a set of parallel perimeters by a set of orthogonal planes.
SMUHIS Create a histogram using the shortcut evaluation method.
SMUMOD Shortcut method for estimating grade and tonnes above cut-off.
SORTX Sort any file into ascending (or optionally descending) order using multiple keyfields.
SPLAT Append each record of the 2nd file onto the corresponding record number of the 1st file.
SPLICO produce contour plot and string files of irregularly scattered data points
SPLIT Split an input file into multiple output files based on a single specified keyfield value.
ST1GX Calculate and report to the output text window general summary statistics for a single field.
STATCOM compute-statistical-compare
STATNP Calculate non-parametric summary statistics on numeric fields in a file.
STATS Perform statistical analysis on data tables.
SUBJOI Write out all records and all fields from both input files where the specified keyfields match.
SUBWVE Write out matching records and matching fields where the specified keyfield(s) match.
SURCAL This process computes provisional and/or adjusted coordinates of surveys contained in an input
file of reduced observations.
SURFIP Interpolate a set of point data into a pair of surfaces expressed as sub-cells in a 3-D model.
SURLOG Read a character format system file containing records of survey information.
SUROBS Reduce survey angle and distance measurements.
SURPOI Interpolate upper/lower elevation values onto a file of 2D points.
SURTAC Compute 3D coordinates of points located by angle and distance measurements from a survey
statio.
SURTRI Create DTM from string and/or point data.
SURVIG View and edit a database of surveyed point and string data.
SURVIN Convert data between formats for open pit mine planning.
SURVOU Convert data between formats for open pit mine planning.
SUSTP2 Input Surpac2 String File.
SUSTPE Input Surpac String File.
SWATHPLT Create Swath plot data and Swath strings to compare grades in models and samples.
SYSPAR Display application system parameters.
TABRES Produces reserve tabulations from a results file produced by other processes.
TBLIN Enter data of definable format from a system file or the keyboard.
TDIN Create a Datamine model file from a Whittle THREE-D results file.
TDOUT Output a Datamine model file in Whittle THREE-D format.
TERPLT Generate a ternary (triangular) diagram plot.
TONGRAD Calculate tonnes and grade reserves in a block model.
TREND Fits a polynomial trend surface to a set of data.
TRICON Generate contours from irregularly scattered data points or triangulated DTM.
TRIFIL Fill a single wireframe file with cells and sub-cells using an existing prototype file.
TRIPOI Point (X
TRIVAL Report the tonnes and grades of the blocks within a wireframe.
TRIVOL Report volume and other statistics of a wireframe model.
TRUETHK Calculate the true
UNFOLD Transform a set of X
UNIFCOND Use Uniform Conditioning to investigate recoverable reserves at alternative Selective Mining
Unit sizes.
UNLINK (Macros only) unlink a Datamine binary file from the current project.
VARFIT Display experimental variograms as produced by the VGRAM process
VER Displays the current Studio version and build number in the Command control bar.
VGM3DMAP Variogram-3d-map
VGRAM Calculate variograms and/or cross variograms.
WEAVE Write out all records and matching fields where the specified keyfield(s) match.
WEDGEVOL Evaluate a wedge volume whose limits are defined by two or three DTMs or surfaces.
WFCODE Apply a code to point coordinates depending on whether the points are constrained by a
wireframe.
WFEXPND Expand (or contract) a wireframe by a fixed distance in all directions.
WFTREND Extend a wireframe along a planar trend beyond the data limits.
WIREFILL Fill a single wireframe file with cells and sub-cells.
WIREPE Create strings defining the intersection of a wireframe model and planes.
XRUN Start execution of a macro or menu.
XVALID Analyse parameters for grade estimation
name quickkey
abort-string-tracing ast
add-attributes nat
add-segment-to-string ass
addcolumn
adjust-string-in-ore adj
adjust-to-gradient atg
als-coreviewer als
assign-cross-section acs
assign-end-section aes
attribute-manager att
box-all-points-inside-switch sib
box-any-points-inside-switch scb
break-string bs
break-string-with-string bks
break-strings bki
build-holes
cancel-command can
cg-points cgp
change-azi-by-neg-inc ca-
change-azi-by-pos-inc ca+
change-dip-by-neg-inc cd-
change-dip-by-pos-inc cd+
charge-blastholes cbh
check-for-crossovers cxx
check-link-selected-strings clss
check-toe-spacing rcts
circle-by-three-points a3
circle-from-center-to-edge cec
circle-from-edge-to-edge cee
circle-with-defined-radius cir
clip-inside-perimeter cip
clip-outside-perimeter cop
clip-to-perimeter ctp
close-all-strings cla
close-background-image
close-string clo
combine-adjacent-perimeters cap
combine-strings com
combine-strings-attrib
composite-drillholes cmdh
condition-string cond
cone-from-drillhole cnfd
cone-from-string cnfs
connect-strings conn
connect-strings-attrib cona
connection-on-grade cog
converge-segments trc
convert-wf-hull hts
convert-wframe-slice-sections
convert-wireframe-slice-string css
copy-ring cpr
copy-string cps
copy-string-attributes coa
copy-wireframe cpw
create-drillhole-collars-file cdhf
create-isosurfaces iso
create-model-prototype cmp
create-new-drillhole-object cnd
create-new-legend cnl
create-new-planes-object cnn
create-new-points-object cnp
create-new-strings-object cns
create-new-wireframe-object cnw
create-plot-view cpv
create-ramp-string crs
create-shells csh
create-tag-string tgs
crosshair-switch tch
cut-and-fill-volumes
define-holes
define-new-rosette nr
delete-file dfi
delete-points-mode dpo
delete-string-segment dss
delete-trace-switch tet
delete-wireframe-point
deselect-all-drillholes dad
deselect-all-limits dal
deselect-all-planes dan
deselect-all-points dap
deselect-all-strings das
deselect-limit dli
design-set-background
displace-blast-points
displace-blast-strings
display-drillholes dh
display-eval-results-switch drs
display-wireframe dw
display-wireframe-in-order wfo
divide-string sdi
divide-wireframe-by-strings
drillhole-display-change tdhd
drillhole-display-hide
drillhole-display-show
drillhole-tickmark-switch tsti
drillhole-to-string d2s
drive-evaluation-switch tde
dtm-create md
dtm-undo-last-link uld
dynamic-evaluation-report
edit-attributes eat
edit-coincident-points-switch ecp
edit-dh-attributes ed
edit-hole-attribute-
edit-model-cell-values ecv
edit-point-coordinate epc
edit-wireframe-attributes ewa
end-link eli
end-link-boundary elb
end-link-selected-strings
erase-all eal
erase-all-drillholes ead
erase-all-dynamic-drillholes
erase-all-filters eaf
erase-all-models eam
erase-all-planes ean
erase-all-points eap
erase-all-strings eas
erase-all-wireframes
erase-drillhole esd
erase-plane ern
erase-point erp
erase-ring-holes reh
erase-string ers
erase-wireframe erw
erase-wireframe-selected ewf
erase-wireframe-surface ews
erase-wireframes eaw
evaluate-1-string ev1
evaluate-2-strings ev2
evaluate-all-strings eva
evaluate-all-strings-plane
evaluate-current-wireframe
evaluate-display-legend-switch
evaluate-set-of-wireframes
evaluate-wireframe evw
evsource-blockmodel-switch umd
evsource-drillhole-switch udd
extend-string ext
extend-string-to-string ess
extrude-strings exs
fillet-single-string-point ssp
fillet-string-points spf
fillet-string-points-berm spbf
filter-all-drillholes
filter-all-model-files
filter-all-objects
filter-all-planes
filter-all-points
filter-all-strings
filter-all-wireframe-triangles
filter-drillhole-off nfd
filter-drillholes fdh
filter-model-file fm
filter-objects fob
filter-planes fln
filter-points fp
filter-string-off nfs
filter-strings fs
filter-wireframe-triangles fwt
filter-wireframes fww
fit-cross-section fx
fit-elevation fe
format3dobject fdd
formatlegends fdl
full-cell-evaluation-switch fce
gaussian-wireframe-from-points
generate-outlines
generate-outlines-attrib ou
get-all-strings ga
get-drillholes gd
get-points gp
get-view gvi
get-wf-data gw
gradient-degrees-switch
gradient-percent-switch
gradient-positive-up-switch
gradient-ratio-switch
grid-dtms grd
grid-interval-on-string ipg
group-selection-display sed
gvp-cells-update-switch tvumc
gvp-dhole-update-switch tvud
gvp-gouraud-switch tssh
gvp-hole-collar-bhid-switch
gvp-hole-end-bhid-switch
gvp-modelp-update-switch tvump
gvp-modelpc-update-switch tvupc
gvp-modelwf-update-switch tvumw
gvp-point-annot-update-switch tvua
gvp-point-update-switch tvupo
gvp-string-update-switch tvus
gvp-unload-planes-switch tvun
gvp-wf-update-switch tvuw
hide-non-selected-drillholes hnsd
hide-non-selected-strings hnss
hole-report
ignore-clipping-switch tcl
infill-between-holes inf
insert-adjacent-hole iah
insert-at-intersections ii
insert-by-segment-length ibl
insert-curve ics
insert-hole-by-toe ibh
insert-line ils
insert-multiple-adjacent ima
insert-near-points inp
insert-offsets iof
insert-parallel-hole iph
insert-point-segment-center ipsc
insert-points-mode ipo
insert-setoff-hole ish
insert-setoff-interactive isi
insert-slot-expanders ise
insert-wireframe-point iwp
interactive-dh-editor de
intersect-drillholes-wireframes idw
keep-combined-switch ko
legend-switch sleg
link-3dsolid-align-switch
link-3dsolid-collate-switch
link-3dsolid-end-link-switch
link-3dsolid-interp-switch
link-3dsolid-method-switch l3s
link-3dsolid-view-plane-switch
link-area-method-switch tma
link-boundary lbo
link-boundary-to-line lbl
link-complete-drive ldr
link-crossover-switch tlc
link-drive-ends lde
link-drive-in-segments lds
link-multiple-strings lms
link-outline-pair l2
link-outline-pair-attribute l3o
link-quad lq
link-radii-method-switch tea
link-selected-outlines
link-selected-string-el-switch
link-selected-strings-attrib lma
link-selected-strings-plane lmpl
link-selected-strings-point lmpp
link-shape-method-switch tpr
link-single-outline l1
link-strings ls
link-to-line ll
linking-method-switch tlm
load-from-datasource
load-wf-from-datasource
loadfromproject
loadholesfromproject
loadmodelfromproject
loadpointsfromproject
loadstringsfromproject
make-dtm-from-objects
merge-hole-point-with-perimeter
merge-string-segments mrs
merge-string-segments-attrib
merge-strings-to-object msto
mineable-shape-optimizer-v3
mirror-string smm
model-from-multiple-wireframes mfw
model-plane-change tbm
model-plane-hide
model-plane-show
model-wf-display-switch tmw
modify-blast-hole-charge mbc
modify-blast-hole-length mbh
move-blast-hole-toe mbt
move-clip-section-backward msb
move-clip-section-forward msf
move-plane mpl
move-plane-backward mpb
move-plane-forward mpf
move-points-mode mpo
move-string mo
move-string-section mss
move-strings2d mstr
move-wireframe mw
move-wireframe-point mpw
mro
new-points npo
new-polygon npy
new-string ns
new-string-attribs-snap-switch asw
new-traverse-string
new-triangle ntr
next-ring-plane rnp
offset-inside-string ois
offset-outside-string oos
offset-string exp
open-all-strings oa
open-background-image oim
open-file of
open-model-file om
open-results-file ore
open-rosette-file oro
open-section-file ose
open-string ost
open-visualiser-window vo
optimize-decline
outl-plane-switch ftp
outline-batch-switch trs
outline-drive-in-segments
outline-inside-switch-off
outline-inside-switch-on
outline-selection-switch tsin
outline-storage-switch tsif
pan-down-graphics
pan-graphics pan
pan-left-graphics
pan-right-graphics
pan-up-graphics
paste-ring par
perimeter-selection-switch pes
perspective-view-switch psp
plane-by-one-point 1
plane-by-three-points 3
plane-by-two-points 2
plane-display-change
plane-display-hide
plane-display-show
point-display-change spo
point-display-hide
point-display-show
polygon-intersection plyi
polygon-intersection-delete-originals
polygon-union plyu
polygon-union-delete-originals
prev-ring-plane rpp
progress-monitor-switch pmo
project-points-to-wf ptp
project-points-to-wf-angle pta
project-points-to-wf-in-view pti
project-points-to-wfs pptw
project-string-at-angle pro
project-string-onto-wf ptw
project-string-onto-wf-in-view ptd
project-string-onto-wf-limit ptl
project-string-onto-wfs pstw
project-to-view-plane ptv
query-angle
query-current-file-filters qf
query-lines ql
query-points qp
query-single-point qsp
query-string qst
query-string-between-points qsb
query-triangle qt
quick-color-all qca
quick-color-drillholes qcd
quick-color-models qcm
quick-color-planes qcl
quick-color-points qcp
quick-color-strings qcs
quick-color-wireframes qcw
ramp-between-2-points r2
ramp-by-three-points r3
ramp-curve-fit rcf
rapid-digitize-switch rap
read-visualiser-view rvv
read-vr-view rvr
rectangle-from-center-to-corner rcec
rectangle-from-corner-to-corner rcce
redraw-display rd
redraw-strings-in-order rso
reduce-points red
reduction-percentage pre
reference-points drp
remove-string-crossovers tcr
rename-drillhole rnd
rename-ring-holes rnr
reposition-sirotiff rst
reset-view rvi
resolve-string-points resp
reverse-string rev
reverse-view vwr
rings-edit-hole-params-switch reps
rings-move-drill rmd
rings-move-rig rmr
rings-position-rig rpr
rings-rig-reversed-switch rrrs
rings-save-design-planes rsp
rings-toe-snap-to-design-switch rtds
rings-toe-spacing-marker-switch rtss
road-outline-intersection
roof-string-colour roc
rotate-string rst
rotate-string-by-angle rsn
rotate-string-to-azimuth rsa
rotate-wireframe row
save-view svi
scale-wireframe
select-all-drillholes sad
select-all-planes san
select-all-points sap
select-all-strings sas
select-cross-section scs
select-drillhole-data-off
select-drillhole-data-on
select-drillhole-data-switch sdd
select-model-data-off
select-model-data-on
select-model-data-switch
select-perimeter spe
select-plane-data-off
select-plane-data-on
select-plane-data-switch snd
select-point-data-off
select-point-data-on
select-point-data-switch spd
select-points spn
select-ring-design-limit srdl
select-ring-drill-drifts srdd
select-string
select-string-data-off
select-string-data-on
select-string-data-switch sss
select-string-depth
select-wireframe sw
select-wireframe-data-off
select-wireframe-data-on
select-wireframe-data-switch
sequence-numbers seqn
set-adjustment-cut-off scu
set-adjustment-method-switch am
set-clipping scl
set-design-parameter
set-dhevaluation sep
set-face-angle fng
set-field-output-status
set-gradient-convention grc
set-move-along-plane-switch
set-move-along-screen-switch
set-near-far
set-ore-categories soc
set-projection-distance prj
set-ramp-segment-length rsl
set-scale-factor sex
set-secondary-clipping
set-snap-grid-parameters gs
set-snap-grid-switch stg
set-snap-lines-switch stl
set-snap-mode snm
set-snap-none-switch sn0
set-snap-points-switch stpo
set-snap-surface-switch
set-step-distance ssd
set-to-previous-view pv
set-tolerance sto
set-view-fov
set-view-interactive vi
setup-azi-dip-increments incs
show-background-image-switch
show-current-files cf
show-current-loaded-files sfs
slice-wireframe slw
smooth-gradient smg
smooth-string sms
snap-always-switch
snap-to-drillhole-data-off
snap-to-drillhole-data-on
snap-to-drillhole-data-switch stpd
snap-to-mid-string-switch stms
snap-to-perpendicular-switch stpe
snap-to-plane stpl
snap-to-plane-data-off
snap-to-plane-data-on
snap-to-plane-data-switch stpn
snap-to-point-data-off
snap-to-point-data-on
snap-to-point-data-switch stpp
snap-to-string-data-off
snap-to-string-data-on
snap-to-string-data-switch stps
snap-to-wireframe-data-off
snap-to-wireframe-data-on
snap-to-wireframe-data-switch stpw
square-from-center-to-corner stc
square-from-center-to-edge sce
square-from-corner-to-corner scc
square-from-edge-to-edge see
status-panel-switch tsp
string-display-change dst
string-display-hide
string-display-show
string-to-drillhole stdh
string-to-plane cstp
string-to-road stro
string-trace stra
superimpose-plot sup
system-command
tag-string-colour taco
transform-coordinates tco
translate-string
translate-string-opt tra
translate-wireframe trw
trim-to-string tri
uncharge-blastholes ubh
undo-last-link ull
undo-last-string-edit ule
unlink-triangle utr
unlink-wireframe uw
unload-all-data ua
unsuperimpose-plot unpl
update-vr-objects vro
update-vr-objects-only
update-vr-view vrv
use-clipping-switch uc
use-modelfile-switch tum
use-quick-commands-switch
use-tag-switch uta
valida
validation-report
vcontour
view-along-string vas
view-by-one-point v1
view-by-three-points v3
view-by-two-points v2
view-to-plot vf
viewset
vr-to-plot-create vrpc
vr-to-plot-overlays vrpo
vr-to-plot-section vrps
vr-to-plot-view vrpv
wall-string-colour wlc
wall-strings-switch twss
wf-attr-from-str-switch tsa
wf-boundary-line-switch twvb
wf-convert-line-switch twcl
wf-display-change twd
wf-display-hide
wf-display-show
wf-intersection-switch tiw
wf-intersections sfi
wf-select-attribute-switch sba
wf-select-file-switch sbfi
wf-select-filter-switch sbfl
wf-select-group-switch sbg
wf-select-surface-switch sbs
wireframe-between-surfaces-intersecting
wireframe-clean wcl
wireframe-create-from-points cwp
wireframe-decimate
wireframe-difference wdi
wireframe-dynamic-evaluation wde
wireframe-extract-separate wes
wireframe-intersection win
wireframe-merge wme
wireframe-section csl
wireframe-section-multiple msl
wireframe-smooth wfs
wireframe-solid-hull soh
wireframe-split spli
wireframe-split-by-surface spbd
wireframe-split-multiple
wireframe-split-string spbs
wireframe-surface-merge udt
wireframe-surface-merge-intersecting
wireframe-surface-project pdv
wireframe-under-surface wus
wireframe-under-surface-intersecting
wireframe-union wun
wireframe-verify wvf
wireframe-volume wvo
write-all-strings wa
write-drillholes wdh
write-points wp
write-selected-drillholes wrd
write-selected-strings wrs
write-single-drillhole wds
write-single-string ws
write-wf-data ww
x-sections-switch tdx
xsec-string-colour csc
zoom-all-extents ze
zoom-all-graphics za
zoom-graphics zx
zoom-out zz
ACCMLT
ADDDD
ADDMOD
ADDTRI
AED
ALFNUM
ANISOANG
ANOVA1
APPEND
APTOTRUE
ASTRAN
ATTCHK
ATTSET
BHCOUNT
BLKPER
BLKTRI
CDTRAN
CHART
CHECKIT
CHKTRI
COGTRI
COMBMOD
COMPBE
COMPBR
COMPDH
COMPSE
CONPOL
CONTOU
CONTST
COPY
COPYNR
CORREL
COUNT
COZONE
DDCOPY
DDLIST
DECILE
DECLUST
DECODE
DELETE
DESURV
DIFFRN
DILUTE
DILUTMOD
DISPLA
DMEDIT
DMFD
DTMCUT
DTMMOD
DXFOUT
ELLIPSE
ENGLOG
ENVSEQ
ESTIMA
EXPFLD
EXPMMW
EXPNDMOD
EXPORT
EXTEND
EXTNDF
EXTRA
FDIN
FDOUT
FFUNC
FILCOM
FILEXP
FILTPO
FORMAT
FXIN
FXOUT
GENTRA
GRADE
GRIDDC
HELP
HISFIT
HISTOG
HOLES3D
HOLMER
IGESIN
IGESOUT
IJKGEN
IMPORT
INDATA
INDEST
INPDDF
INPFIL
INPFML
INPUTC
INPUTD
INPUTW
IPDNNEST
IPDNPG
ISOHOL
ISOMET
ISOPER
ISOTRI
JOIN
LINK
LINK3D
LINKPE
LIST
LISTC
LISTDR
LOADCF
MACEND
MACST
MDTRAN
MENU
MGSORT
MIKSCELL
MINEWD
MINLAY
MINWID
MINZON
MOD2BLKS
MOD2XYZ
MODENV
MODRES
MODSPLIT
MODTRA
MODTRI
MONACO
NOMENU
NOXRUN
ORIGIN
OUTPUT
PANELEST
PANELK
PAUSE
PDRIVE
PERDTM
PERFIL
PEROPN
PERTAG
PERTRA
PICDIR
PICFLD
PICREC
PICTED
PITMOD
PLOTAN
PLOTAR
PLOTCN
PLOTCX
PLOTDA
PLOTFR
PLOTFT
PLOTFX
PLOTGR
PLOTHI
PLOTLI
PLOTLN
PLOTMX
PLOTPA
PLOTPE
PLOTPI
PLOTSI
PLOTSK
PLOTSX
PLOTTI
PLOTTR
PLOTTX
PLOTVA
PLOTWS
PLTABL
PLTLAY
POLREG
POLYDC
PPQQPLOT
PROMOD
PROPER
PROTOM
PROTOP
PTCLDWF
QUANTILE
QUICKEST
QUIG
RANK
REBLOCK
RECCOP
REGMOD
REGMOW
RENAME
REPORK
REPORT
RESCAT
RESTRI
RINGS
ROTORDER
SCREEN
SCREND
SCRFMT
SECDEF
SELCOP
SELDEL
SELEXY
SELPER
SELTR2
SELTRI
SELWF
SETENV
SETVAL
SLIMOD
SLIPER
SMUHIS
SMUMOD
SORTX
SPLAT
SPLICO
SPLIT
ST1GX
STATNP
STATS
SUBJOI
SUBWVE
SUDTTR
SUPES2
SUPES3
SUPEST
SUPOOB
SURCAL
SURFIP
SURLOG
SUROBS
SURPOI
SURTAC
SURTRI
SURVIG
SURVIN
SURVOU
SUSTP2
SUSTPE
SWATHPLT
SYSPAR
TABRES
TBLIN
TDIN
TDOUT
TERPLT
TONGRAD
TREND
TRICON
TRIFIL
TRIPOI
TRIVAL
TRIVOL
TRUETHK
UNLINK
VARFIT
VER
WEAVE
WEDGEVOL
WFCODE
WFEXPND
WFTREND
WIREFILL
WIREPE
XRUN
XVALID
description
Delete the string currently being digitized and exit string tracing mode.
Add a new alpha or numeric attribute column to a data table in memory.
Add a new segment to the end of a selected string using various options.
Add a new alpha or numeric column to a table that is loaded into memory.
Adjust a closed string to match the ore cell boundary defined by legend and ore/waste
parameters.
Adjust a string to fit a gradient.
Opens a new ALS CoreViewer™ portal to show detailed core information for the selected sample.
Change the view azimuth by the negative of the increment specified in setup-azi-dip-increments.
Change the view dip by the negative of the increment specified in setup-azi-dip-increments.
Close all strings - make the last vertex coincident with the first vertex on all filtered strings.
Connect two strings from the selected end-point of the first to the selected end-point of the
second to form a single longer string. The new string attributes will match the first string selected.
Connect two strings from the selected end-point of the first to the selected end-point of the
second to form a single longer string
Generate new 2 point string(s) from a selected location to points along a target string that have a
specified gradient.
Remove unwanted string vertices by trimming string with a projected line along a selected
segment.
Convert the hull (silhouette) of a wireframe to a string.
Create multiple strings where a defined set of planes intersect a wireframe object.
Interactively convert the intersection of a wireframe with the active section plane into strings.
Create isoshell wireframes from drillhole or point sample data to model grades or rock types.
Create a tag string to force wireframe links to occur between specified points.
Toggle crosshair display in the Design window.
Generate solid wireframes and statistics about the volume between overlapping DTMs.
Displays a wireframe in a sequence determined by a numeric field from the triangles file.
Divide an outline (closed string) into two outlines by selecting two points on the closed string.
Deletes vertices (points) in any selected or non-selected string(s) or point(s) nearest to the cursor.
Specify the maximum curvature radius permitted between line segments on a selected berm.
Filter string objects to restrict which records in their data tables gets displayed and used.
Filter wireframe objects to restrict which records in their data tables gets displayed and used.
Create a grid of points to represent the elevation of points belonging to wireframe surfaces.
Toggle on or off whether block model cells will be updated in the Visualizer window or when
transferring data from the Design window to the VR/3D window via update-VR-objects.
Toggle on or off whether drillholes will be updated in the Visualizer window or when transferring
data from the Design window to the VR/3D window via update-VR-objects.
Toggle on or off smooth (Gouraud) shading in the Visualizer window or when transferring data
from the Design window to the VR/3D window via update-VR-objects.
Toggle on or off the display of BHID labels in the Visualizer window or when transferring data
from the Design window to the VR/3D window via update-VR-objects.
Toggle on or off the display of BHID labels at the end of drillholes in the Visualizer window or
when transferring data from the Design window to the VR/3D window via update-VR-objects.
Toggle on or off whether model planes will be updated in GVP or when transferring data from the
Design window to the VR/3D window via update-VR-objects.
Toggle on or off whether the model cloud will be updated in GVP or when transferring data from
the Design window to the VR/3D window via update-VR-objects.
Toggle on or off whether the model with wf will be updated in the Visualizer window or when
transferring data from the Design window to the VR/3D window via update-VR-objects.
Toggle point annotation in the Visualizer window or when transferring data from the Design
window to the VR/3D window via update-VR-objects.
Toggle on or off whether point data will be updated in the Visualizer window or when transferring
data from the Design window to the VR/3D window via update-VR-objects.
Toggle on or off whether string data will be updated in the Visualizer window or when transferring
data from the Design window to the VR/3D window via update-VR-objects.
Control whether previously loaded planes are removed on updating the Visualizer window or
when transferring data from the Design window to the VR/3D window via update-VR-objects.
Toggle on or off whether wireframe data will be updated in the Visualizer window or when
transferring data from the Design window to the VR/3D window via update-VR-objects.
Show only the selected drillholes and filter all non selected drillholes to be hidden.
Show only the selected strings and filter all non selected strings to be hidden.
Creates a hole summary of any dynamic drillholes loaded.
Set per view. Ignores any clipping set in the 3D/VR sections. Only supported in 3D/VR views.
Create underground blast design with hole collars and toes interpolated between existing holes.
Insert a blast hole adjacent to an existing hole for designing fans of holes.
Insert new string points at string intersections.
Insert new string vertices between selected start and end points.
Replace string vertices with a curve between selected start and end points.
Insert a hole by locating the toe.
Replace string vertices with a new line or set of points between selected start and end points.
Toggle On/Off the Uniform Interpolation option applied when using link-multiple-strings.
Toggle the sorting of strings (distance from view) prior to linking with link-multiple-strings.
Link selected strings to form a solid wireframe after sorting on a specified numeric attribute.
Moves the current section plane backward by a distance equal to the current section width.
Moves the current section plane forward by a distance equal to the current section width.
Turns off the option to include an INSIDE column in the outlines created by generate-outlines.
Turns on the option to include an INSIDE column in the outlines created by generate-outlines.
This column will contain a 1 for internal boundaries
Toggle for individual selection of new outlines.
Toggle whether new outlines replace strings in the original strings object or create a new strings
object.
Move the view upwards.
Move the view
Move the view towards the right.
Move the view towards the left.
Move the view downwards.
Paste previously copied ring data from the clipboard.
Toggle to control how boundary strings are selected in relation to a mouse-click.
Switches between perspective and non-perspective projection (3D/VR window only)
Define the active section using a single selected point.
Define active section orientation using two selected points to define a line.
Set the active section orientation by specifying three points on its plane.
Toggle on or off the display of planes data.
Hide all planes objects data.
Show all planes objects data.
Show/Hide all points objects data.
Hide all points objects data.
Show all points objects data.
Create a new polygon which contains the area common to all selected polygons.
Delete original polygon data after running polygon-intersection.
Creates a new polygon which contains the area inside all overlapping polygons.
Delete original polygon data after running polygon-union.
Set view to next or previous ring plane along survey string.
Toggle the use of the progress monitor when running commands.
Project point data to a wireframe surface.
Project selected points onto a wireframe surface by projecting at a specified angle.
Project selected points onto a wireframe surface in a direction along the view direction.
Project a string along the line perpendicular to the (view) plane onto a visible wireframe surface.
Launches the Quick Color dialog to apply a specified color or legend to selected overlays.
Launches the Quick Color dialog to apply a specified legend to selected drillhole overlays.
Launches the Quick Color dialog to apply a specified legend to selected model overlays.
Launches the Quick Color dialog to apply a specified legend to selected planes overlays.
Launches the Quick Color dialog to apply a specified legend to selected points overlays.
Launches the Quick Color dialog to apply a specified legend to selected strings overlays.
Launches the Quick Color dialog to apply a specified legend to selected wireframe overlays.
Read the azimuth and dip of the current visualizer view and apply them to the current view.
Toggles the inclusion/exclusion of block model data during data selection commands.
Toggle between using the cut-off grade or legend items methods when using adjust-string-in-ore.
Set the step distance for string adjustment when outlining ore using adjust-string-in-ore.
Change the view to the previous view orientation in the Design window.
Set matching tolerance for points to be used in the DTM.
Displays a dialog to set the VR/3D window field of view for the active view.
Display the View Settings dialog to define the current Design window section.
Define the define increments used in Underground Blast Design.
Turn on or off the display of background images in the Design Window.
Open the Project Browser to select a data file for loading.
Open the Data Object Manager to manage loaded data objects.
Display a temporary line at the intersection of the current wireframe and the Design window's
viewplane.
Smooth part of a string to a consistent gradient.
Smooth a string by parabolic blending to insert new points between existing pairs of points.
Generate a square string by interactively defining its center point and one of its corners.
Generate a square string by interactively defining its center point and a point on its edge.
Generate a new string from intersecting portions of strings that are selected interactively.
Update the VR/3D window with the settings and objects displayed in the Design Window.
Update the VR/3D window according to the status of objects in the Design window.
Update the VR/3D View to reflect the view orientation in the Design Window.
Turn on or off data clipping limits in the Design window.
Toggle the use of the loaded model slope angle and berm width values when projecting strings.
Set VR/3D view position and orientation based on two selected points and orientation.
Generates a closed solid between an upper DTM (e.g. topo) and lower DTM (e.g. pit shell).
Generates a closed solid between an upper DTM (e.g. topo) and lower DTM (e.g. pit shell). The
DTMS must completely intersect.
Create a new single wireframe representing the union of two input wireframes.
Verify the integrity of a surface and detect and automatically fix errors where possible.
Report the volume of a wireframe
Save all loaded string data to a Datamine file.
Save loaded static drillholes table to a Datamine file.
Save loaded point data to a Datamine file.
Save selected drillhole data to a Datamine file.
Save selected string data to a Datamine file.
Save a single drillhole to a Datamine file.
Save a single string to a Datamine file.
Save loaded wireframes to Datamine point and triangle files.
Turn on or off retaining of drive cross-sectional perimeters.
Set colour for drive cross-section strings in underground design.
Resets the view limits to show all data
Resets the position and extents of the view plane to show all displayed data.
Zooms the view in to the selected area.
Zoom out from the current view.
Accumulate sub-totals for up to 25 numeric fields
Add new alpha or numeric fields to an existing file
Add two models with the same Data Definition together by superimposing the second one onto
the first.
Append two sets of wireframe files together to create a single set of wireframe files.
Legacy Datamine file editor.
Copy a file while converting given alphanumeric fields to numeric.
Calculate dip and dip direction angles from string/wireframe data.
Carry out one-way analysis of variance on groups of replicate values of a numeric field in a file.
Append two or more files to create a new file containing the records of all the input files.
Convert values in a file from apparent dip angle to true dip angle. Used in dynamic anisotropy.
Read one or more ASCII sample assay files in SIF format and updates a DATAMINE database file
by matching sample numbers.
Check the legend definition file prior to running ATTSET.
Set the values of nominated attribute fields in a file based on the values of a given data field in
the input file.
Count the number of drillholes used to estimate each model cell.
Create a set of perimeters around blocks in a model.
Converts block model(s) to wireframe surfaces(s).
Carry out a simple translation and/or rotation on X
Transform data into a suitable format for creating charts.
Carry out validation checks on string data
Check wireframe point and triangle files.
Add the centre of gravity coordinates and optionally the vertex coordinates of each triangle to a
wireframe triangle file.
Combine up to 20 block models that may have different parent cells sizes
Composite desurveyed drillhole sample values over horizontal benches.
Composite desurveyed drillhole sample data over horizontal benches
Composite drillhole sample data values down each hole at a specified interval.
Composite drillhole data by optimizing the composite interval using ore and waste criteria.
Count the number of records in a file that have the same value of up to 10 sorted Keyfields.
Investigate the relationship between mining parameters and the rocktype composition of each
mining volume
Copy just the Data Definition of a file to a new file (create a new file with no records).
Translate coded drillhole logs though a dictionary file into readable English equivalents.
Create an extraction sequence for the envelopes generated by the MODENV process.
Studio process for estimating grades into a model (Used within Advance Interpolation
command).
Add records to a file so that a record is output for given increments of a start field until an end
field value is reached.
Expand a set of planar perimeters according to a user defined minimum mining width and
create their centre lines.
Expand a model to cover a larger volume and fill it with cells. The volume can optionally be
defined and constrained by input wireframe surfaces or perimeters.
Export data using a specified Data Source Driver.
Extends an existing file with data entered in free format.
Extends an existing file with data entered in fixed format.
Create and modify values in a file using mathematical and algebraic expressions.
Create a Datamine model file from a Whittle FOUR-D results file.
Output a Datamine model file in Whittle FOUR-D format.
Estimate the variance of a point in a block.
Convert all explicit fields with a constant value to implicit fields.
Convert all implicit fields in a file to be explicit.
Filter coincident or adjacent points from an input file
Generate a tabulated report for output to the screen or to a system file.
Input FOUR-X results file.
Output a model to Whittle FOUR-X format.
Transform data fields using one or more standard transformation functions.
Interpolate grades into a block model using basic methods.
optimize-decluster-grid-size
Display the online help system for your application (add a command name to show context
help).
Perform interactive histogram least-square distribution fitting.
Generate a frequency histogram and a cumulative frequency histogram for any numeric field.
Convert sample
Merge two sets of drillhole data samples each with different downhole distances.
Convert an AutoCAD IGES file to a Datamine Plot File.
Output a Datamine Plot File as an AutoCAD IGES file.
Recalculate the IJK index values in a model using the X
Run the data import function to load data into memory from an external data source.
Enter CSV data either from the keyboard or from an external CSV file using a matching
Datamine Data Definition (DD) file.
Use the IE method to estimate grades into a block model using the CDF of indicator transformed
sample grades.
Convert data definition and regular space separated output file produced by the OUTPUT
process to a Datamine file.
Specify a Data Definition (DD) to create a new file and enter CSV data from the keyboard or an
external file to populate it.
Specify a Data Definition (DD) to create a new file and enter fixed format data from the
keyboard or an external file to populate it.
Input text records from either a text file or the keyboard to create a Datamine file.
Create a file containing a Data Definition only by specifying its field names
Enter fixed format data from the keyboard or a text file into a Datamine file using an existing
Datamine Data Definition file.
Interpolate grades into a block model using basic methods.
Interpolate grades into block model cells using non-parametric methods.
Generate a plot file showing an isometric view of drillholes.
Generate a plot file of an isometric view of a wireframe surface of a block model.
Generate an isometric view of perimeters and strings.
Generate a plot file of an isometric view of a wireframe model.
Join two sorted files on one or more keyfields.
Link a Datamine file outside the project folder to a file inside the project folder (macro only).
Define
Link perimeters to form wireframe models.
Display a Datamine file in a standard format in the output window.
Display a Datamine file in a standard format in the output window.
Display a list of all Datamine files and their physical locations that are in the Datamine project.
Convert a Studio macro file (.mac) to a compressed Studio menu file (.men).
Stop interactive process storage to a Studio macro file.
Run a Datamine Studio macro.
Transform and rotate a block model onto a new prototype.
Run a Datamine Studio menu.
Sort file in ascending or descending order on multiple keyfields.
Convert an MIK model into a model that is suitable for input to NPV Scheduler.
Create LG 'Additional Arcs' for mining width.
Launch the Interactive Mine Design Layout process.
Composite drillhole data into ore and waste intervals.
Investigate the relationship between mining parameters.
Create mining blocks
Assign point data with values from a block model.
Identify envelopes of economically mineable blocks in a block model.
Produce results table of grades in a block model.
Splits a Datamine model using an input wireframe to create a new model that is constrained by
the wireframe.
Create trace lines through a model containing the model attribute values.
Convert the visible faces of a sub-cell block model to wireframe surfaces.
Generate a table of random numbers with a specified number of records using a choice of
distributions.
Check the syntax of the currently established menu.
Validate the syntax of a macro(s) or menu(s) in a character format system file.
Calculate the origin and extent of a rotated model.
Save a Datamine format file to text format as either space (regular columns) or comma
separated.
Estimate the grade and variance of 2D and 3D panels.
Estimate the average value and the estimation variance of irregular shaped 2-D panels.
Write field names to an output file if the fields in the input file match pattern expressions.
Append each record of the 2nd file onto the corresponding record number of the 1st file.
produce contour plot and string files of irregularly scattered data points
Split an input file into multiple output files based on a single specified keyfield value.
Calculate and report to the output text window general summary statistics for a single field.
Write out all records and all fields from both input files where the specified keyfields match.
Write out matching records and matching fields where the specified keyfield(s) match.