The UEG series intermediate relay has 4, 6, or 8 pairs of contacts and mounts on DIN rails. It is used to reliably expand signals and provide electrical isolation in electric systems. The relay operates within 8ms at 220VDC, 125VDC, or 110VDC nominal input voltages and has silver/nickel contacts that can switch 10A at 250VAC or 30VDC. Models include options for normal open (NO) and normal closed (NC) contacts.
The UEG series intermediate relay has 4, 6, or 8 pairs of contacts and mounts on DIN rails. It is used to reliably expand signals and provide electrical isolation in electric systems. The relay operates within 8ms at 220VDC, 125VDC, or 110VDC nominal input voltages and has silver/nickel contacts that can switch 10A at 250VAC or 30VDC. Models include options for normal open (NO) and normal closed (NC) contacts.
The UEG series intermediate relay has 4, 6, or 8 pairs of contacts and mounts on DIN rails. It is used to reliably expand signals and provide electrical isolation in electric systems. The relay operates within 8ms at 220VDC, 125VDC, or 110VDC nominal input voltages and has silver/nickel contacts that can switch 10A at 250VAC or 30VDC. Models include options for normal open (NO) and normal closed (NC) contacts.
Description ● This series relay has 4 or 6 or 8 pairs of con- tacts ● Only two locations of one type ● Use EMG20 shells which are flame-retardant with high strength ● Mounting type:DIN rail 35mm ● Using occasion:used in the occasion where need expand signal reliably and electric isolation in electric system.
VERSION :V1.0(20190829)
Technical Data Selection and ordering data
Typical models UEG/C -4H /220VDC Nominal input voltage Un:DC:220V/125V/110V AC:220V/125V Relay type Must Operate (Reset) Voltage for UEG/C:75%Un Operate Time with Un for UEG/C:≤8ms UEG/C=bi-stable intermediate relay Reset Time with Un for UEG/C:≤8ms Contact Type Power Absorption:≤3W 4H=4NO; Max Inrush Current:10A 2H2D=2NO+2NC; Connection capacity:10A@250VAC/30VDC 3H1D=3NO+1NC; Contact material:silver/nickel Terminal line diameter:2*2.5mm² 6H=6NO; Initial Dielectric Strength: 3H3D=3NO+3NC; Between Coil and Contacts:2000VAC(1 minute 4H2D=4NO+2NC; ≤10mA) 8H=8NO; Insulation Resistance:≥100MΩ 4H4D=4NO+4NC; Temperature Range: 6H2D=6NO+2NC; Operating:-40℃~+70℃ Storage:-40℃~+85℃ Shell material:ABS Rated voltage 220VDC; 125VDC; 110VDC等
Circuit diagram
UEG/C-4H UEG/C-2H2D UEG/C-3H1D
NANJING ODES ELECTRIC CO.,LTD RD-ENG-T14 V3.0 20140403 ADD:NANJING JIANGPU Economic Development Zone http://www.odes.com.cn ZIP:211800 NO5 DONGFANGHONG HEBING Road TEL:86-025-58196277 FAX:86-025-86552801 Page 2
UEG/C-6H UEG/C-3H3D UEG/C-4H2D
UEG/C-8H UEG/C-4H4D UEG/C-6H2D
Installation dimension diagram(mm)
NANJING ODES ELECTRIC CO.,LTD RD-ENG-T14 V3.0 20140403
ADD:NANJING JIANGPU Economic Development Zone http://www.odes.com.cn ZIP:211800 NO5 DONGFANGHONG HEBING Road TEL:86-025-58196277 FAX:86-025-86552801