Professional Documents
Culture Documents
Silver Modified Porous 3D Nitrogen-Doped Graphene Aerogel Highly Efficient Oxygen Reduction Electrocatalyst For ZN Air Battery
Silver Modified Porous 3D Nitrogen-Doped Graphene Aerogel Highly Efficient Oxygen Reduction Electrocatalyst For ZN Air Battery
Jie Hu, Ziwei Shi, Xueqian Wang, Huici Qiao, Hao Huang
PII: S0013-4686(19)30294-4
DOI: https://doi.org/10.1016/j.electacta.2019.02.051
Reference: EA 33642
Please cite this article as: J. Hu, Z. Shi, X. Wang, H. Qiao, H. Huang, Silver-modified porous 3D
nitrogen-doped graphene aerogel: Highly efficient oxygen reduction electrocatalyst for Zn−Air battery,
Electrochimica Acta (2019), doi: https://doi.org/10.1016/j.electacta.2019.02.051.
This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to
our customers we are providing this early version of the manuscript. The manuscript will undergo
copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please
note that during the production process errors may be discovered which could affect the content, and all
legal disclaimers that apply to the journal pertain.
ACCEPTED MANUSCRIPT
Jie Hua, b, Ziwei Shib, Xueqian Wangb, Huici Qiaob, Hao Huanga ∗
a
State Key Laboratory of Metastable Materials Science & Technology, Yanshan
PT
University, Qinhuangdao, 066004, P.R. China
RI
b
Hebei Key Laboratory of Applied Chemistry, Department of Environment and
SC
Abstract: Developing highly efficient electrocatalyst is crucial to improve the
U
efficiency of oxygen reduction reaction for Zn-air battery. Herein, Ag-modified
AN
porous 3D nitrogen-doped graphene aerogel is synthesized by one-step hydrothermal
method for promoting the electrocatalytic performance and stability toward oxygen
M
and graphene oxide, and the three-dimensional self-assembly can be finished during
TE
reaction catalytic activity with a superior stability to commercial 20wt.% Pt/C. The
high electrochemical activity and durability of the hybrid is also confirmed in Zn-air
batteries that outperform Pt/C in discharge voltage plateau and long-term durability,
∗
Corresponding author. Tel.: +86 15369700375. E-mail address: huanghao@ysu.edu.cn.
1
ACCEPTED MANUSCRIPT
1. Introduction
Zn-air batteries are receiving intense interest owing to their high energy density,
PT
cost effective, and environmentally benign in energy storage and conversion devices
RI
[1-3]. However, the intrinsic sluggish kinetics of oxygen reduction reaction (ORR), as
SC
the main cathode reaction in batteries, greatly restricts the large-scale application of
zinc-air batteries [4-6]. Generally, noble metal Pt and its alloys are commonly used to
U
improve the reaction rate and overcome the large over potential in ORR. Although
AN
Pt-based catalysts have exhibited excellent performance in ORR process, the high
M
costs and poor stability of Pt severely hamper their commercialization in clean energy
ORR catalysts because of their high electrical conductivities and large specific surface
AC
defects, active sites and adjust the charge distribution of carbon, which can greatly
two-dimensional carbon matrix, has drawn increasing attention and commonly used
aggregation and the strong planar stacking of 2D graphene (2DG) sheets can lead to
the loss of active sites and a lower specific surface area [22-23]. Consequently, some
efforts have been done to assembly 2DG sheets into three-dimensional forms such as
PT
hydrogels [21], aerogels [24], and other carbon frameworks [25-26]. Such 3D
RI
graphene (3DG) structures are not only possess the merits and properties of graphene
sheets but also for preventing graphene sheets from agglomerating, providing higher
SC
surface utilization and rapid transfer channels of ions, which greatly enhance its
U
applicability in real applications[27-31].
AN
However, the experimental performance of 3DG networks still lie far behind so
lots of oxygenic functional groups, such as carboxyl, carbonyl and so on, therefore
D
lead to low conductivity. An effective method is to modify the 3DG with a small
TE
amount of noble metal [32-34]. For instance, Qin et al. [35] synthesized Pt/Fe,
Ag has been regarded as the most contender: (1) relatively low cost; (2) high
C
conductivity and stability; (3) can catalyze the direct four electron (4 e-) reaction for
AC
ORR and the HO2 anion disproportionation. For example, D.J. Davis et al. [36]
3
ACCEPTED MANUSCRIPT
activity and can be used as capable catalysts for the air electrode.
PT
source but also acted as the reducing agent used to restore AgNO3 to Ag. Interestingly,
RI
it has been found that N doping, the three-dimensional self-assembly of graphene
oxide, reduction of graphene oxide (GO) and AgNO3 are going on simultaneously.
SC
The as-prepared hybrid presents an interconnected 3D porous framework, large
U
specific surface area and Ag nanoparticles homogeneously distribute on the inner and
AN
surface of 3DNG networks. The resultant Ag-modified 3D N-doped graphene
(Ag-3DNG) exhibits superior catalytic activity for ORR compare with the commercial
M
Pt/C (20 wt %) catalyst, such as a better onset potential of +0.97 V (vs. RHE),
D
half-wave potential of +0.81 V (vs. RHE) and excellent stability. Furthermore, the
TE
Zn−air batteries by using Ag-3DNG as catalyst for air electrode present higher
Insert Fig.1
AC
that GO has a double conjugate structure with hydrophobic plane and hydrophilic
force and electrostatic repulsion between graphene sheets regulates their solution
4
ACCEPTED MANUSCRIPT
properties, when the equilibrium is broken, the hydrogel is produced. During the
process of gelation, the part of graphene sheets overlaps to form hydrogels with 3D
porous structures. In this study, the AgNO3 precursors are adsorbed on the surface of
GO by the electrostatic attraction, and then the ethylenediamine plays three roles
PT
during the hydrothermal process: (1) N is incorporated into graphene through the
RI
ethylenediamine as the nitrogen source; (2) ethylenediamine can be used as a
complexant to react with AgNO3; The complexation of Ag+ and ethylenediamine (en)
SC
is similar with Ag+ and NH3·H2O, Ag+ will be in the form of [Ag(OH)2en]- and its
U
reaction is as follows: Ag+ + 2H2O + en → [Ag(OH)2en]- + 2H+, then [Ag(OH)2en]-
AN
will be reduced to Ag. (3) Ethylenediamine can also restore GO to graphene as a
reducing agent. Thus, N doping process, reduction of AgNO3 and graphene oxide, and
M
hydrothermal process.
TE
Insert Fig.2
Fig. 2a, 2b and 2c show the SEM images of 2DG, 3DG and 3DNG, it is observed
EP
that 2DG presents a planar structure with gauze-shaped wrinkles and folds, whereas
C
3DG and 3DNG display interconnected 3D porous network with hierarchical pore
AC
sizes, suggesting graphene sheets are efficiently assembled during the hydrothermal
process. It can be seen that the 3D porous structure after doping N atoms has no
obvious change, which is according with the XRD results. As shown in Fig. 2d, after
the formation of Ag-3DNG, the hybrid still maintain the interconnected 3D porous
network and Ag nanoparticles are uniformly distributed and tightly attached onto the
5
ACCEPTED MANUSCRIPT
outer and inner walls of graphene sheets in the network. Fig. 2e shows that the 3DNG
are transparent with some wrinkles. For Ag-3DNG, Fig. 2f clearly indicates that Ag
particles are distributed uniformly on the surface of 3DNG with no aggregation. The
PT
Ag nanoparticles embedded in the N-doped graphene nanoshell. Furthermore, it
RI
further confirms the well-defined lattice fringe of Ag, where the lattice distance of
0.236 nm and 0.204 nm are corresponded to the (111) and (200) plane, respectively.
SC
The selected-area electron diffraction pattern (Fig. 2h) gives diffraction pattern
U
agreeing with fcc Ag crystals as well.
AN
Insert Fig.3
diffraction, as shown in Fig. 3. It can be seen that the key indicator of GO at 11.5o is
D
functional groups between the graphite layers [38]. In the pattern of 3DG, 3DNG and
Ag-3DNG, the diffraction peak of GO disappeared and a new diffraction peak at 24.5o
EP
is observed, which can be indexed to the (002) plane of graphene with an interlayer
C
functional groups from GO and also proved the existence of strong π-π stacking
interactions between the graphene sheets as the major cause of gelation [23, 39].
Moreover, the XRD pattern of Ag-3DNG also shows four more diffraction peaks
located at 38.1o, 44.3o, 64.4o, and 77.4o, corresponding to the (111), (200), (220), and
(311) planes , respectively, which are commendably accord with the standard card of
6
ACCEPTED MANUSCRIPT
the fcc Ag crystal (PDF#04-0783). This result confirms that AgNO3 has been
Insert Fig.4
The structure of samples was further confirmed by Raman spectra. Fig. 4 shows
PT
that all of spectra appear two characteristic peaks of graphite: the D peak is at ~1350
cm-1 and the G peak is at ~1590 cm-1, which are corresponded to disordered sp3
RI
carbon and graphitic sp2 carbon, respectively [40-41]. The intensity ratio of ID/IG, is
SC
an indication to evaluate the extent of defects in graphitic structures [42-43]. The ID/IG
U
values are 1.47 for 3DNG, 1.24 for 3DG and 0.87 for GO, respectively, indicating that
AN
the hydrothermal process results in a large number of sp3 defects on 3DG. Moreover
the high ID/IG value of 3DNG demonstrates that doping N atoms into the carbon
M
matrix can lead to highly disordered [44]. For Ag-3DNG, because metal Ag has no
D
Raman peak, its shape is similar to 3DNG spectrum, except there is a little peak at
TE
~490 cm-1, corresponding to Ag2O. This shows the existence of silver in the form of
Insert Fig.5
C
Insert Table 1
AC
The BET specific surface areas and respective pore size distribution of 3DG,
is apparent that all samples present the typical type (IV) isotherm which is indicative
of the mesoporous nature of samples with a H3 hysteresis loop. As plotted in Fig. 5a,
the 3DNG presents a greater adsorption capacity, therefore it has a larger surface area,
7
ACCEPTED MANUSCRIPT
as listed in Table 1, which may be attributed to the N atoms doped into the carbon
matrix resulted in more defects as illustrated from the Raman analysis. Moreover, the
larger surface area can expose more active sites and enhance the catalytic activity. For
Ag-3DNG, the specific surface area and pore diameter decreased comparing with
PT
3DNG, which is due to the introduction of Ag occupying the position of some holes.
RI
The corresponding pore-size distributions curves via the Barrett-Joyner-Halenda (BJH)
method are shown in Fig. 5b. It can be seen that the pore size distribution after doping
SC
N atoms has no obvious change, except the pores centered at 3.3 nm has greatly
U
increased, and the loading of silver particles slight reduced the pore size.
AN
Insert Fig.6
Insert Table 2
M
composition and valence state. As shown in Fig. 6a, the XPS survey spectrum reveals
TE
that the Ag-3DNG hybrid mainly consists of C, N, O and Ag. The atomic ratio and
EP
mass ratio of C, N, O and Ag are shown in Table 2. The high-resolution C1s spectrum
shown in Fig. 6b exhibits four peaks, those corresponding to C-C (284.4eV), C-O
C
reveals the successful doping of N in the grephene. Fig. 6c can be deconvolved into
three peaks, which centered at 398.6, 399.5 and 400.5 eV, corresponding to
reports, the N atom doped into the carbon matrix can change the electronic structure,
improve chemical activity and reduce Fermi level of the adjacent carbon atoms,
8
ACCEPTED MANUSCRIPT
and graphitic-N play the key role in ORR process. It has been established that
Pyridinic-N occurs in the edge of graphite planes and links with two carbon atoms, it
can donate a electron to the aromatic π system to impart Lewis basicity to the carbon,
PT
which is able to facilitate the reductive adsorption of O2 and improve the onset
RI
potential of electrocatalysts. Graphitic-N bonds with three carbon atoms in the
graphene basal plane, which is as electrocatalytic active sites for ORR and greatly
SC
increasing the limiting current density [47-48]. In the Ag3d spectrum (Fig. 6d), two
U
peaks at 368.4 and 374.4 eV can be assigned to Ag3d5/2 and Ag3d3/2, corresponding to
AN
the 3d bonding energy of metallic silver, which further illustrates the presence of Ag
Insert Fig.7
D
As shown in Fig. 7a, the obvious cathode peaks corresponding to ORR are
TE
Furthermore, the potential of peak for Ag-3DNG is 0.75 V (vs RHE), which is more
EP
positive than that for 2DG (0.64 V), 3DG (0.66 V) and 3DNG (0.68 V), indicating the
C
better ORR catalytic activity of Ag-3DNG. Fig. 7b shows the LSV curves of 2DG,
AC
3DG, 3DNG, Ag-3DNG and commercial 20 wt% Pt/C. Apparently, Ag-3DNG exhibits
RHE) and larger diffusion-limited current density (5.25 mA⋅cm-2), which comparable
to those of commercial Pt/C (0.98 V, 0.85 V, 5.25 mA⋅cm-2) and much better than
2DG (0.83 V, 0.75 V, 3.61 mA⋅cm-2), 3DG (0.88 V, 0.78 V, 4.16 mA⋅cm-2) and 3DNG
9
ACCEPTED MANUSCRIPT
(0.89 V, 0.76 V, 5.06 mA⋅cm-2), respectively, indicating the excellent ORR activity of
or carbon hybride was listed in Table S1. As shown in table, the Ag-3DNG shows
PT
comparable and better ORR performance than them in an alkaline medium.
RI
To further unravel the reaction kinetics for ORR, the LSV measurements at
400-1600 rpm were performed and the kinetic parameters were calculated by
SC
Koutecky-Levich (K-L) equation, as shown in Fig. S1. As can be seen, the
U
diffusion-limited current densities of different samples exhibit an increasing trend due
AN
to the more high speeds diffusion. The fitting K-L plots are linear relationships
between j-1 and ω-1/2 under each potential. The number of transferred electrons n for
M
approached the theoretical value 4 of Pt/C measured in the same condition, indicating
TE
due to its unique structure, as illustrated in SEM images. On one hand, their
C
charge transfer and diffusion resistance. On the other hand, the hierarchical porous
structures with a large pore volume and specific surface area provide more active sites
According to the literature, the amount of active sites in carbon materials can be
10
ACCEPTED MANUSCRIPT
increased by doped with N [35, 48, 49-50]. As illustrated in XPS, pyridinic-N can
affect the electron cloud distribution of adjacent carbon atoms, which can lead to
produce active sites that can directly participate in ORR process. Therefore,
pyridinic-N is also able to facilitate the reductive adsorption of O2 and improve the
PT
onset potential of electrocatalysts. Moreover, graphitic-N bonds with three carbon
RI
atoms in the graphene basal plane can increase the limiting current density. Finally,
Ag-3DNG has superior activities that comparable to Pt/C and better than Ag-free
SC
catalysts (3DNG), indicating Ag nanoparticles plays essential role in the catalyst due
U
to their high conductivity and electrochemical activity.
AN
The high ORR activity of Ag-3DNG is also confirmed by the results determined
from rotating ring-disk electrode (RRDE) measurements (Fig. 7c, d). The low yield of
M
the H2O2 (<7%) reflects the high electron transfer number (>3.8) between 0.2-0.8 V
D
for Ag-3DNG, which is lower than that of Pt/C but is significantly higher than that for
TE
2DG, 3DG and 3DNG, suggesting the ORR on Ag-3DNG mainly proceeds through
four-electron pathway, coinciding well with the results of RDE. Furthermore, the
EP
corresponding Tafel slop (Fig. 7e) of Ag-3DNG at low over potential region is
C
calculated to be 70.2 mV·dec-1, which is smaller than 3DNG (111.8 mV·dec-1), 3DG
AC
(114.4 mV·dec-1), 2DG (136.6 mV·dec-1) and Pt/C (73.5 mV·dec-1), indicating the fast
shown in Fig. 7f, Ag-3DNG exhibits 14.5% decrease after 28800 s continuous
operation. In contrast, Pt/C displays a faster current loss with about 35% under the
11
ACCEPTED MANUSCRIPT
same conditions, indicating the better stability of Ag-3DNG catalyst. The durability of
the Pt/C is lower than Ag-3DNG, which is owing to the carbon black constituent in
commercial Pt/C catalyst are poorly stable, leading to Pt particles are easily dissolved
PT
Insert Fig.8
RI
In order to futher explored the activity and stability of samples, we incorporated
the catalysts into a real air cathode for the primary zinc-air batteries. The discharge
SC
curves of different catalysts shown in Fig. 8a indicate that 3DG, 3DNG and Ag-3DNG
U
all exhibit a steady state and almost no decay, while Pt/C and 2DG presents obvious
AN
and a relatively slight decay, respectively, which are attributed to the 3DG possesses
three-phase interface and providing more transmission paths for O2. In addition, the
D
zinc-air battery. In this experiment, the battery required to be filled with the fresh
C
electrolyte after every cycle, due to the decline of KOH concentration in the
AC
electrolyte. As can be seen, the discharge plateau is higher after one cycle because the
active material is adequately in contact with electrolyte. The discharge plateau begins
to decrease after the second cycle, and the discharge plateau can be maintain about
1.192 V until the ninth cycle, indicating the Ag-3DNG catalyst shows superior
stability.
12
ACCEPTED MANUSCRIPT
Insert Fig.9
The EIS is shown in the Nyquist plots in Fig. 9, which is referred to investigate
the electrode kinetics and resistance in electrochemical systems. The impedance plots
of all samples are almost composed of a semicircle and a straight line, which are
PT
assigned to charge transfer and diffusion processes of oxygen, respectively. The
RI
impedance spectra is evaluated by fitting the spectra to an equivalent circuit as shown
in the inset of Fig. 9, where R1 represents the ohm resistance between the reference
SC
electrode and current collector, C1 represents the limit capacitance, and all these
U
impedance spectra almost has the same values of R1 and C1. A main difference is the
AN
semicircles in the high frequency regions of the Nyquist plot are attributed to the
charge transfer resistance R2 comes from the Faradaic reactions and double-layer
M
capacitance C2 on the grain surface. The corresponding fitting parameters are listed in
D
Table S2, indicating the Ag-3DNG achieves a rapid charge transport due to the
TE
superior conductivity of Ag. At the same time, the 3D porous graphene acts the role of
electron acceptor and transmission. The straight line of the curve in the low frequency
EP
range represents Warburg resistance W and R3 caused by ion diffusion or the transport
C
between the electrolyte to electrode surface. The 3D porous structure, more defects
AC
and N doping in the Ag-3DNG provide more diffusion and migration pathways of
absorbed oxygen and electrolyte ions. In addition, Ag also possesses good catalytic
Ag-3DNG catalyst shows the larger slope in the low frequency range.
3. Conclusion
13
ACCEPTED MANUSCRIPT
comparable to the commercial Pt/C. Besides, the Zn-air battery with Ag-3DNG as the
PT
catalyst shows higher discharge voltage plateau and better durability than Pt/C. The
RI
prominent electrocatalytic activities are mainly due to its 3D porous structure, the
SC
the high conductivity and stability of Ag. The results demonstrate that the Ag-3DNG
U
hybrid is a promising electrocatalyst in metal-air batteries.
AN
Supplemental Information
Supplementary data and Experimental associated with this article can be found,
M
Acknowledgements
TE
References
[1] J.B. Zhu, M.L. Xiao, Y.L. Zhang, J. Zhao, Z.Q. Peng, C.P. Liu, S.L. Chen, J.J. Ge,
14
ACCEPTED MANUSCRIPT
[2] X.P. Han, X.Y. Wu, C. Zhong, Y.D. Deng, N.Q. Zhao, W.B. Hu, NiCo2S4
31(2017) 541.
PT
[3] Z.S. Song, X.P. Han, Y.D. Deng, N.Q. Zhao, W.B. Hu, C. Zhong, Clarifying the
RI
controversial catalytic performance of Co(OH)2 and Co3O4 for oxygen
SC
Inter. 27 (2017) 22694.
U
[4] A. Pendashteh, J. Palma, M. Anderson, R. Marcilla, NiCoMnO4, nanoparticles on
AN
N-doped graphene: Highly efficient bifunctional electrocatalyst for oxygen
[5] F.L. Meng, H.X. Zhong, D. Bao, J.M. Yan, X.B. Zhang, In situ coupling of strung
D
Co4N and intertwined N-C fibers toward free-standing bifunctional cathode for
TE
138(2016)10226..
EP
[6] X.Y. Wu, X.P. Han, X.Y. Ma, W. Zhang, Y.D. Deng, C. Zhong, W.B. Hu,
C
carbon fiber paper towards efficient rechargeable Zinc-air batteries and water
[7] S. S. Shinde, C.H. Lee, A. Sami, D.H. Kim, S.U. Lee, Jung-Ho Lee, Scalable 3-D
15
ACCEPTED MANUSCRIPT
[8] Q.M. Yu, J.X. Xu, C.X. Wu, J.S. Zhang, L.H. Guan, MnO2 nanofilms on
[9] C.L. Zhang, B.W. Wang, X.C. Shen, J.W. Liu, X.K. Kong, S. S.C. Chuang, D.
PT
Yang, A.G. Dong, Z.M. Peng, A nitrogen-doped ordered mesoporous
RI
carbon/graphene framework as bifunctional electrocatalyst for oxygen reduction
SC
[10] M.F. Wang, T. Qian, J.Q. Zhou, C.L. Yan, An efficient bifunctional
U
electrocatalyst for a Zinc-air battery derived from Fe/N/C and bimetallic
AN
metal-organic framework composites, ACS Appl. Mater. Inter. 9 (2017) 5213.
[11] Z.J. Wang, Y.Z. Lu, Y. Yan, T.Y.P. Larissa, X. Zhang, D. Wu, H. Zhang, Y.H.
M
30(2016)368.
[12] D.X. Ji, S.J. Peng, D. Safanama, H.N. Yu, L.L. Li, G.R. Yang, X.H. Qin, M.
EP
architectures of carbon and highly active transition metals (Fe, Co, Ni) as
AC
(2017) 1665.
[13] A.L. Song, W. Yang, W. Yang, G. Sun, X.C. Yin, L.J. Gao, Y.Z. Wang, X.J. Qin,
16
ACCEPTED MANUSCRIPT
[14] J. Yang, J.T. Hu, M.Y. Weng, R. Tan, L.L. Tian, J.L. Yang, J. Amine, J.X.
PT
Zn-air batteries, ACS Appl. Mater. Inter. 9 (2017) 4587.
RI
[15] T.S. Zhou, Y. Zhou, R.G. Ma, Z.Z. Zhou, G.H. Liu, Q. Liu, Y.F. Zhu, J.C. Wang,
SC
metal-free electrocatalyst for oxygen reduction, Carbon, 114(2017)177.
U
[16] C.S. Li, Y. Sun, W.H. Lai, J.Z. Wang, S.L. Chou, Ultrafine Mn3O4
AN
nanowires/three-dimensional graphene/single-walled carbon nanotube
[17] S.C. Cai, Z.H. Meng, H.L. Tang, Y. Wang, P. Tsiakaras, 3D Co-N-doped hollow
TE
reaction and oxygen evolution reaction, Appl. Catal. B Environ. 217 (2017) 477.
EP
[18] S.S. Liu, C.E. Deng, L. Yao, H.X. Zhong, H.M. Zhang, The key role of metal
C
[19] L.L. Tian, J. Yang, M.Y. Weng, R. Tan, J.X. Zheng, H.B. Chen, Q.C. Zhuang,
oxygen reduction and its application for high-rate Zn-air batteries, ACS Appl.
17
ACCEPTED MANUSCRIPT
[20] X. Zhang, S.E. Liu, Y.P. Zang, R.R. Liu, G.Q. Liu, G.Z. Wang, Y.X. Zhang,
for full water splitting in alkaline media, Nano Energy 30 (2016) 93.
PT
[21] Z.Y. Zhang, F. Xiao, Y.L. Guo, S. Wang, Y.Q. Liu, One-pot self-assembled
RI
three-dimensional TiO2-graphene hydrogel with improved adsorption capacities
SC
5(2013) 2227.
U
[22] W. Lv, C. Zhang, Z.J. Li, Q.H. Yang, Self-assembled 3D graphene monolith
AN
from solution, J Phys. Chem. Lett. 6(2015) 658.
[23] M.M. Zhang, Y. Wang, D.H. Pan, Y. Li, Z.X. Yan, J.M. Xie, Nitrogen-doped 3D
M
[24] W.F. Chen, S.R. Li, C.H. Chen, L.F. Yan, Self-assembly and embedding of
hierarchically porous N-doped carbon with NH3, activation for efficient oxygen
[26] J. Zhang, C.Y. Zhang, Y.F. Zhao, I.S. Amiinu, H.Zhou, X.B. Liu, Y.F. Tang, S.C.
18
ACCEPTED MANUSCRIPT
[27] X.J. Zheng, Q.Zhu, H.Q. Song, X.R. Zhao, T. Yi, H.L. Chen, X.G. Chen, In situ
PT
[28] X.L. Zhu, P.Zhang, S. Xu, X.B. Yan, Q.J. Xue, Free-standing three-dimensional
RI
graphene/manganese oxide hybrids as binder-free electrode materials for energy
SC
[29] R. Vinoth, I.M. Patil, A. Pandikumar, B.A. Kakade, N.M. Huang, D.D.
U
Dionysios, B. Neppolian, Synergistically enhanced electrocatalytic performance
AN
of an n-doped graphene quantum dot-decorated 3D MoS2-graphene nanohybrid
[30] B. Wei, L.D. Wang, Y. Wang, Y.N. Yuan, Q.H. Miao, Z.Y. Yang, W.D. Fei, In
D
[31] T.H. Sun, Z.P. Li, X.H. Liu, Limin Ma, J.Q. Wang, S.R. Yang, Facile
EP
[32] H.Y. Liu , J. Wang , Z.B. Feng , Y.M. Lin , L.Y. Zhang, D.S. Su, Facile
[33] W.C. Ye, X.Z. Shi, J. Su, Y. Chen, J.J. Fu, X.J Zhao, F. Zhou, C.M. Wang, D.S.
19
ACCEPTED MANUSCRIPT
[34] J. Luo, N. Zhang, J.P. Lai, R. Liu, X.Y. Liu, Tannic acid functionalized graphene
PT
toward dye reduction, J Hazard. Mater. 300 (2015) 615.
RI
[35] Y. Qin, L. Chao, J.J. He, Y. Liu, F.Q. Chu, J.Y. Cao, Y. Kong, Y.X. Tao, Pt
SC
oxygen reduction reaction, J Power Sources, 335(2016)31.
U
[36] D.J. Davis, A.R.O. Raji, T.N. Lambert, J.A. Vigil, L. Li, K. Nan, J.M. Tour,
AN
Silver-graphene nanoribbon composite catalyst for the oxygen reduction reaction
[37] F.W.T. Goh, Z.L. Liu, X.M. Ge, Y. Zong, G.J. Du, T.S.A. Hor, Ag
D
[38] B.W. Wang, L.L. Si, J.Y. Geng, Y.H. Su, Y. Li, X.L. Yan, L.G. Chen,
EP
204(2017)316.
[40] S.W. Liu, H.M. Zhang, Q. Zhao, X. Zhang, R.R. Liu, X. Ge, G.Z. Wang, H.J.
20
ACCEPTED MANUSCRIPT
106(2016)74.
PT
[41] Y.C. Zhou, Y.H. Leng, W.J. Zhou, J.L. Huang, M.W. Zhao, J. Zhan, C.H. Feng,
RI
Z.H. Tang, S.W. Chen, H. Liu, Sulfur and nitrogen self-doped carbon nanosheets
SC
hydrogen evolution reaction, Nano Energy, 16(2015)357.
U
[42] A.C. Ferrari, J. Robertson, Interpretation of raman spectra of disordered and
AN
amorphous carbon, Phys. Rev. B, 61(2000) 14095.
[43] J.C. Wang, S.A. Kondrat, Y.Y. Wang, G.L. Brett, C. Giles, J.K. Bartley, L. Lu, Q.
M
5(2105) 3575.
[44] Y.J. Wu, S.L. Zhao, K. Zhao, T.X. Tu, J.Z. Zheng, J. Chen, H.F. Zhou, D.J. Chen,
EP
S.X. Li, Porous Fe-N x /C hybrid derived from bi-metal organic frameworks as
C
311(2016)137.
[45] H.X. Zhong, K. Li, Q. Zhang, J. Wang, F.L. Meng, Z.J. Wu, J.M. Yan, X.B.
8(2016)308.
21
ACCEPTED MANUSCRIPT
[46] Z. Chen, D. Higgins, Z.W. Chen, Nitrogen doped carbon nanotubes and their
impact on the oxygen reduction reaction in fuel cells, Carbon, 48(2010) 3057.
PT
reactions in acidic and alkaline electrolytes, Appl. Catal. B Environ.
RI
192(2016)26.
[48] Z.Y. Guo, Z. Xiao, G.Y. Ren, G.Z. Xiao, Y. Zhu, L.M. Dai, L. Jiang, Natural
SC
tea-leaf-derived, ternary-doped 3D porous carbon as a high-performance
U
electrocatalyst for the oxygen reduction reaction, Nano Research, 9(2016) 1244.
AN
[49] Y.X. Zhao, Q.X. Lai, Y. Wang, J.J. Zhu, Y.Y. Liang, Interconnected
reduction catalysts for Zn−air batteries, ACS Appl. Mater. Inter. 9(2017) 16178.
D
[50] Z.P. Zhang, J.T. Sun, M.L. Dou, J. Ji, F. Wang, Nitrogen and phosphorus
TE
electrocatalyst towards the oxygen reduction reaction, ACS Appl. Mater. Inter.
EP
9(2017) 16236.
C
AC
Figure Captions
Fig. 2. SEM images of 2DG (a), 3DG (b), 3DNG (c) and Ag-3DNG (d). TEM images
of 3DNG (e) and Ag-3DNG (f). HRTEM image (g) and SAED pattern (h) of
Ag-3DNG.
22
ACCEPTED MANUSCRIPT
Fig. 3. XRD patterns of GO, 3DG, 3DNG and Ag-3DNG.
Fig. 5. (a) N2 adsorption and desorption isotherms of 3DG, 3DNG and Ag-3DNG; (b)
PT
Fig. 6. XPS spectra of (a) survey scan, High-resolution curves of (b) C1s, (c) N1s and
(d) Ag 3d of Ag-3DNG.
RI
Fig. 7. (a) CV profiles of 2DG, 3DG, 3DNG and Ag-3DNG in 0.1 M KOH solutions
SC
saturated with N2 or O2 at a scan rate of 50 mV⋅s-1. (b) LSV curves, (c) RRDE
voltammograms, (d) electro-transfer number and peroxide yield, and (e) Tafel
U
AN
plots of 2DG, 3DG, 3DNG, Ag-3DNG and commercial 20 wt% Pt/C in an
O2-saturated 0.1 M KOH solution at a scan rate of 5 mV⋅s-1 and a rotating rate of
M
Pt/C in an O2-saturated 0.1 M KOH solution at 0.6 V and a rotation speed of 400
TE
rpm.
Fig. 8. (a) Discharge curves of different catalysts at 25 mA⋅cm-2 and (b) The
EP
Fig. 9. Nyquist plots of the assembled Zn–air battery with different catalysts. Inset:
AC
Table 2. The atomic ratio and mass ratio of C, N, O and Ag in the XPS analysis of
Ag-3DNG.
23
ACCEPTED MANUSCRIPT
Table. 1
PT
3DG 219.5521 15.1897 0.8337
RI
Ag-3DNG 197.4952 14.0945 0.7735
U SC
AN
M
D
TE
C EP
AC
ACCEPTED MANUSCRIPT
Table. 2
Ratio C N O Ag
PT
Mass ratio (%) 74.38 8.81 10.07 6.74
RI
U SC
AN
M
D
TE
C EP
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC
ACCEPTED MANUSCRIPT
PT
RI
U SC
AN
M
D
TE
EP
C
AC