Professional Documents
Culture Documents
Irjet V5i3286 PDF
Irjet V5i3286 PDF
© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 1262
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 05 Issue: 03 | Mar-2018 www.irjet.net p-ISSN: 2395-0072
This section shows the circuit diagram of the Black Box in 2. Reset Circuit:
which we used the ARM7 processor along with the other
peripherals. This block diagram shows the connection of all Reset BUTTON: It is essential in the system to avoid
the sensors to the processor. This circuit diagram has been programming pitfalls and sometimes to manually bring back
made in PROTEUS 8.0 software. It is easy to use and simple the system to the initialization mode.
but effective interface.
3. OSCILLATOR:
This block diagram consists of:
Oscillations are provided using a crystal and are necessary
1. POWER SUPPLY: for the system to work.
In the power supply, LPC2148 works on 3.3 V power supply. 4. ARM 7 (LPC2148):
LM 75 is used for generating 3.3 V supply. However, basic
peripherals like LCD, Motor Driver IC works on 5V. So AC In ARM7 family, LPC2148 is widely used IC.ARM processor is
mains supply is converted into 5V. LM 75 is used to convert based on reduced instruction set computing (RISC)
5V into 3.3V. Power supply has been made by architecture. The instruction set of ARM is uniform and fixed
in length. 32-bit ARM processor has two instruction set:
general 32 bit ARM instruction set and 16-bit Thumb
instruction set. It supports multiple stage pipelining in a
simple three stage pipeline, the instructions follow three
stages: Fetch, Decode and Execute.
© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 1263
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 05 Issue: 03 | Mar-2018 www.irjet.net p-ISSN: 2395-0072
BELT SENSOR: body. cut the circuit from LED and photo diode, we use
interrupt to calculate the rotation speed of the wheel.
Belt sensor indicates whether seat belts are fastened. In our
prototype we have used Audio Jack as a Belt sensor. This is
ensured by checking if the button connected is pressed or not
.One push button is used to detect place of the seat belt
during the drive. The push button is placed on the seat belt
and gives logic ’zero’ when the belt is used and logic ‘one’
when the belt is not placed by the driver.
RS232:
OPTOCOUPLER:
© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 1264
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 05 Issue: 03 | Mar-2018 www.irjet.net p-ISSN: 2395-0072
1’st Auth
or Sumedh Satyapal Moon:
Photo Student, Department
of E&TC Enginering,
1. Highly sensitive to LPG, Iso butane, Propane. Nagpur, Maharashtra, India.
2. Sensitive to alcohol, smoke. 2nd Auth
3. Fast response. or Photo
Saurabh Rajkumar Funde:
4. Stable and long life. Student, Department
of E&TC Enginering,
5. Simple drive circuit.
Nagpur, Maharashtra, India.
3. CONCLUSIONS
© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 1265