Professional Documents
Culture Documents
ARIES Drill Parts Manual
ARIES Drill Parts Manual
ARIES Drill Parts Manual
SECTION 1 Warranty 1
10051SEC 3 Undercarriage 3
1
CUBEX 10051-12-00 ARIES Drill
2
Warranty
Section 1
CUBEX CUBEX WARRANTY
F101A
CUBEX WARRANTY
All new machinery manufactured by CUBEX is warranted against defects in material and
workmanship under normal use and service. The period of warranty is one year or 2000 hours, which ever
ends first, from commencement of initial operation. The following post delivery inspection and start-up
sheet S-001 must be completed and returned to CUBEX before any warranty claims will be considered.
All rebuilt equipment such as topdrive, rotary actuators and compressors will have a warranty
period of 90 days from date of start-up.
The obligation of CUBEX is limited under the warranty to replace or repair without charge, F.O.B.
factory, any part of its own manufacture that has been proven to be an original manufacturing defect. Allied
components furnished to CUBEX are warranted only to the extent of the original manufacturer's warranty. In
any case the customer must notify CUBEX immediately after discovery of any defect within the warranty
period.
To establish the claim CUBEX reserves the right to have the material in question returned to the
factory, at the buyer's expense. CUBEX is not obligated to bear the cost of labor or transportation charges in
replacing or repairing defective parts. In no case will CUBEX be liable for consequential or special
damages.
This warranty shall not apply to any equipment, which has been subject to misuse, neglect or
accident; nor does it apply to any equipment repaired or altered, without authorization from CUBEX.
There are no understandings, agreements, representations or warranties, expressed or implied
(including any regarding mechanic availability or fitness for a particular purpose) not set forth above or
otherwise appearing in writing.
WARRANTY POLICIES
1. PRODUCTS COVERED
Warranty applies to all new and remanufactured CUBEX equipment.
5. WARRANTY CLAIMS
A) To avoid down time, order replacement parts and then file warranty claim using the
Warranty Claim Form -F102.
B) If requested material in question must be returned to CUBEX at customers expense. A
copy of the Warranty Claim Form-F102 with the appropriate information completed must
accompany the returned parts.
C) Upon the receipt of material in question and the Warranty Claim Form-F102, CUBEX will
credit the customer if the parts are proven defective.
Date Delivered:______________________________________________________
Sold to:______________________________________________________________
Unit Model:___________________________________________________________
Compressor:___________________________________________________________
Motor:________________________________________________________________
Options:______________________________________________________________
______________________________________________________________________
Customer Instructions
In order to enable us to provide you with the best possible service, always specify the
full model and serial number of unit. These can be found on the serial number plate fastened
to the unit electrical panel. When ordering spare parts provide complete part numbers and
descriptions. These can be found in the parts breakdowns of this manual.
The completion of this form indicates that your customer representatives have read,
understand and accept the terms of the factory warranty as detailed on F101A.
Cubex Limited
1218 Redonda St., Box 13, Grp 524, RR5
Winnipeg, Manitoba
Canada, R2C 2Z2
Title: _______________________________________________________________
CUSTOMER COPY
ii May 30, 2001
CUBEX CUBEX WARRANTY
S-001
Date Delivered:______________________________________________________
Sold to:______________________________________________________________
Unit Model:___________________________________________________________
Compressor:___________________________________________________________
Motor:________________________________________________________________
Options:______________________________________________________________
______________________________________________________________________
Customer Instructions
In order to enable us to provide you with the best possible service, always specify the
full model and serial number of unit. These can be found on the serial number plate fastened
to the unit electrical panel. When ordering spare parts provide complete part numbers and
descriptions. These can be found in the parts breakdowns of this manual.
The completion of this form indicates that your customer representatives have read,
understand and accept the terms of the factory warranty as detailed on F101A.
Cubex Limited
1218 Redonda St., Box 13, Grp 524, RR5
Winnipeg, Manitoba
Canada, R2C 2Z2
Title: _______________________________________________________________
1218 Redonda St., Box 13, Grp 524, RR5, Winnipeg, Manitoba, Canada, R2C 2Z2
W-
1. Distributor 2. Model
Distributor’s Claim No. Serial No.
Page of
Comments
Repair Procedures Followed
Qty. Part No. Description Net Cost Qty. Part No. Approved Cost
Total Parts
5. Labour Claimed
Total Parts
Comments
Sub-Total
Exchange Rate
$
I certify that the parts and labour claimed for repair were used as indicated and Total Credit
that failure did not appear to have resulted due to negligence, misuse, accident
and that the equipment was not altered without written permission from Cubex. Date
App'd. by
Signature Date
General Assembly
Section 2
CUBEX 10051SEC 2 General Assembly
2.2
CUBEX 10051GEN General Arrangement
2-1.1
CUBEX 10051GEN General Arrangement
2-1.2
CUBEX CP17027-23DR5 Pump Drive Assembly
2-2.1
CUBEX CP17027-23DR5 Pump Drive Assembly
2-2.2
CUBEX CM11028A Gauge Panel Assembly
2-3.1
CUBEX CM11028A Gauge Panel Assembly
2-3.2
CUBEX CM19104 Cable Reel Assembly
2-4.1
CUBEX CM19104 Cable Reel Assembly
2-4.2
CUBEX CM11117A Remote Control Stand Assembly
2-5.1
CUBEX CM11117A Remote Control Stand Assembly
2-5.2
CUBEX 10051CTRL Control Panel
2-6.1
CUBEX 10051CTRL Control Panel
2-6.2
CUBEX CM19750-007 Main Panel
2-7.1
CUBEX CM19750-007 Main Panel
2-7.2
CUBEX CM19750-007 Main Panel
2-7.3
CUBEX CM19750-007 Main Panel
2-7.4
CUBEX CM19055-148.1 Drilling Control Panel w/Car w/B/O
2-8.1
CUBEX CM19055-148.1 Drilling Control Panel w/Car w/B/O
2-8.2
CUBEX CM19055-182 Carousel Valve Junction Box
2-9.1
CUBEX CM19055-182 Carousel Valve Junction Box
2-9.2
CUBEX CM19055-516 Display Control Panel
2-10.1
CUBEX CM19055-516 Display Control Panel
2-10.2
CUBEX CM19055-533 Setup Control Panel Dual Stinger w/Jack
2-11.1
CUBEX CM19055-533 Setup Control Panel Dual Stinger w/Jack
2-11.2
CUBEX CM19055-912 Local I/O Panel
2-12.1
CUBEX CM19055-912 Local I/O Panel
2-12.2
CUBEX CM19055-912 Local I/O Panel
2-12.3
CUBEX CM19055-912 Local I/O Panel
2-12.4
CUBEX CM19055-904 Remote I/O Panel
2-13.1
CUBEX CM19055-904 Remote I/O Panel
2-13.2
Undercarriage
Assembly
Section 3
CUBEX 10051SEC 3 Undercarriage
3.1
Feed and Rotation
Components
Section 4
CUBEX 10051SEC 4 Feed and Rotation Components
4.2
CUBEX CM41475 Slideover
4-1.1
CUBEX CM41475 Slideover
4-1.2
CUBEX CM44400 Rotary Actuator
4-2.1
CUBEX CM44400 Rotary Actuator
4-2.2
CUBEX CX009312 10 Ft. Centralizer Mast
4-3.1
CUBEX CX009312 10 Ft. Centralizer Mast
4-3.2
CUBEX CM65103A Top Drive Mounting Plate
4-4.1
CUBEX CM65103A Top Drive Mounting Plate
4-4.2
CUBEX CM45813 Mast Connection Plate Assembly
4-5.1
CUBEX CM45813 Mast Connection Plate Assembly
4-5.2
CUBEX CM45278 Wiper Divertor Assembly
4-6.1
CUBEX CM45278 Wiper Divertor Assembly
4-6.2
CUBEX CM16300-24 Top Drive - 6230, No. 24
4-7.1
CUBEX CM16300-24 Top Drive - 6230, No. 24
4-7.2
CUBEX CM16300-24 Top Drive - 6230, No. 24
4-7.3
CUBEX CM16300-24 Top Drive - 6230, No. 24
44 1 1/2NPTx3/4NPT Elbow
45 1 3/4NPTx1/4NPT Reducer (used on QXR)
46 CP16356 2 Dust Cover
47 CP16302 6 3/4" High-Collar Lockwasher
48 CP65410-18 1 Plug M18x1
49 CP16207-38 1 O Ring
50 2 1/4 Female Swivel JIC
51 1 1/4" Hose 12" Lg
52 1 Reducer 2022-4-4
53 CM12015 1 Vent Bracket
54 1 1 1/8 ID U-bolt with Strap Plate
4-7.4
CUBEX CM16303 Air Swivel Added bearing
4-8.1
CUBEX CM16303 Air Swivel Added bearing
4-8.2
CUBEX CP17014-6 Hydraulic Motor
4-9.1
CUBEX CP17014-6 Hydraulic Motor
1 CP17014-601 7 Bolt
2 CP17014-602 1 End Cover
3 CP17014-603 1 - Commutator Seal
4 CP17014-604 5 - Seal Ring
5 CP17014-605 1 Commutator Assembly
6 1 Commuting Ring (comes with CP17014-605)
7 CP17014-607 1 Manifold
8 CP17014-608 1 Rotor Set
9 CP17014-609 1 Wear Plate
10 CP17014-610 1 Drive Link
11 CP17014-611 1 Thrust Bearing
12 CP17014-612 1 Coupling Shaft
13 CP17014-613 1 Inner Bearing
14 CP17014-614 1 Thrust Washer
15 CP17014-615 1 Thrust Bearing
16 CP17014-616 1 - Inner Seal
17 CP17014-617 1 - Backup Washer
18 CP17014-618 1 Housing Assembly
19 CP17014-619 1 Outer Bearing
20 CP17014-620 1 - Dirt & Water Seal
21 CP17014-621 1 Backup Washer
22 CP17014-6SK 1 Seal Kit
4-9.2
CUBEX CM85725 Carousel
4-10.1
CUBEX CM85725 Carousel
4-10.2
CUBEX CM85725 Carousel
4-10.3
CUBEX CM85725 Carousel
4-10.4
Hydraulic
Schematics
Section 5
CUBEX 10051SEC 5 Hydraulic Schematics
5.2
CUBEX HS-PRESS-AR3 Hyd Schem, Press. Line With 2 Pumps
5-1.1
CUBEX HS-PRESS-AR3 Hyd Schem, Press. Line With 2 Pumps
5-1.2
CUBEX HS-RET-AR3 Hyd Schem, Return Fill Line
5-2.1
CUBEX HS-RET-AR3 Hyd Schem, Return Fill Line
5-2.2
CUBEX HSCP4750593AR2 Drilling Valve Schem. Remote Accra
5-3.1
CUBEX HSCP4750593AR2 Drilling Valve Schem. Remote Accra
5-3.2
CUBEX HSCP4750529AR2 Hyd Schem, CP47505-29 Setup Valve
5-4.1
CUBEX HSCP4750529AR2 Hyd Schem, CP47505-29 Setup Valve
5-4.2
CUBEX HSCP4750597AR1 Hyd Schem, Tramming
5-5.1
CUBEX HSCP4750597AR1 Hyd Schem, Tramming
5-5.2
CUBEX HSCP4750559AR1 Carousel Valve Schematic
5-6.1
CUBEX HSCP4750559AR1 Carousel Valve Schematic
5-6.2
Hydraulic
Components
Section 6
CUBEX 10051SEC 6 Hydraulic Components
6.2
CUBEX HS-10051 Hydraulic Schematic
6-1.1
CUBEX HS-10051 Hydraulic Schematic
6-1.2
CUBEX HS-10051 Hydraulic Schematic
6-1.3
CUBEX HS-10051 Hydraulic Schematic
6-1.4
CUBEX HS-10051 Hydraulic Schematic
6-1.5
CUBEX HS-10051 Hydraulic Schematic
6-1.6
CUBEX CP17027-23 Hydraulic Pump - RH-100cc
6-2.1
CUBEX CP17027-23 Hydraulic Pump - RH-100cc
6-2.2
CUBEX CP17202-1 Pressure Filter
6-3.1
CUBEX CP17202-1 Pressure Filter
6-3.2
CUBEX CM77009 Stinger Cylinder
6-4.1
CUBEX CM77009 Stinger Cylinder
6-4.2
CUBEX CM77202 Cylinder - Feed Extension
6-5.1
CUBEX CM77202 Cylinder - Feed Extension
1 CM77202-001 1 Tube
2 CM77202-002 1 Rod
3 CM77002-003 1 Piston
4 CM77002-004 1 Nut
5 CM77102-005 1 Gland
6 CM77002-006 1 - Piston Seal
7 CM77102-007 1 - Rod Seal
8 CM77102-008 1 - Rod Wiper
9 CM77002-009 1 - O-ring
10 CM77002-010 1 - Back-Up Ring
11 CM47907-013 1 - Wear Ring
12 CM47104-012 1 - O-ring
13 CM77202-013 1 Spacer Sleeve
CM77102-SK 1 Seal Kit
6-5.2
CUBEX CM47403 Dump Cylinder
6-6.1
CUBEX CM47403 Dump Cylinder
6-6.2
CUBEX CM47505 Cylinder - Slide
6-7.1
CUBEX CM47505 Cylinder - Slide
6-7.2
CUBEX CM77006 Breakout Cylinder
6-8.1
CUBEX CM77006 Breakout Cylinder
1 CM77006-001 1 Tube
2 CM77006-002 1 Rod
3 CM77006-003 1 Piston
4 CM77006-004 1 Nut
5 CM77006-005 1 Gland
6 CM77006-006 1 - Piston Seal
7 CM77006-007 1 - Rod Seal
8 CM77006-008 1 - Rod Wiper
9 CM77006-009 1 - O-ring
10 CM77006-010 1 - Back-Up Ring
11 CM77006-011 1 - Wear Ring
12 CM77006-012 1 - O-ring
13 CM77006-013 1 Spacer Sleave
14 CM77006-012 1 - O-ring
CM77006-SK 1 Seal Kit
6-8.2
CUBEX CM47937 Feed Cylinder 10' Mast
6-9.1
CUBEX CM47937 Feed Cylinder 10' Mast
6-9.2
CUBEX CX077208 Slips cylinder
6-10.1
CUBEX CX077208 Slips cylinder
1 CX077208-004 1 Headplate
2 * 1 O-ring
3 * 1 Rod Seal
4 * 1 Rod Wiper
5 * 1 Wear Ring
6 CX077208-003 1 Piston
7 * 1 PSP seal
8 * 1 O-ring
9 NLF-0500 1 Hex Nylon locknut
10 CX077208-002 1 Cylinder Shaft
11 CX077208-005 1 Threaded Rod End
12 CX077208-001 1 Cylinder Tube
13 CX077208-SK 1 Seal Kit
6-10.2
CUBEX CM47360 Centralizer Cylinder
6-11.1
CUBEX CM47360 Centralizer Cylinder
1 CM47360-001 1 Tube
2 CM47360-002 1 Rod
3 CM47260-003 1 Gland
4 CM47260-004 1 Piston
5 CM47004-004 1 Nut
6 CM47260-006 1 - Piston Seal
7 CM47004-007 1 - Rod Seal
8 CM47004-008 1 - Rod Wiper
9 CM47105-009 1 - O-ring
10 CM47105-010 1 - Back-Up Ring
11 CM47004-012 1 - O-ring
CM47260-SK 1 Seal Kit
6-11.2
CUBEX CM78802 Clamp Arm Cylinder
6-12.1
CUBEX CM78802 Clamp Arm Cylinder
1 CM77802-001 1 Tube
2 CM77802-002 1 Rod
3 CM78806-003 1 Gland
4 CM78806-004 1 Piston
5 NLF0875 1 7/8-14UNF Lock Nut
6 1 - Piston Seal
7 1 - Rod Seal
8 1 - Rod Wiper
9 1 - O-ring
10 1 - Back-Up Ring
11 CP77100-RC 2 Retaining Ring
12 1 - O-ring
13 CP77100-SB 2 Spherical Bearing
14 2 1/8-27NPT Grease Nipple
CM78806-SK 1 Seal Kit
6-12.2
CUBEX CM78807 Clamp Cylinder
6-13.1
CUBEX CM78807 Clamp Cylinder
1 CM78807-001 1 Tube
2 CM78805-002 1 Rod
3 CM78805-003 1 Gland
4 CM78805-004 1 Piston
5 NLF0875 1 7/8-14UNF Lock Nut
6 1 - Piston Seal
7 1 - Rod Seal
8 1 - Rod Wiper
9 1 - O-ring
10 1 - Back-Up Ring
11 CP77100-RC 2 Retaining Ring
12 1 - O-ring
13 CP77100-SB 2 Spherical Bearing
14 CM78806-005 1 Rod End
15 NJF0875 1 7/8-14UNF Jam Nut
16 2 1/8-27NPT Grease Nipple
CM78805-SK 1 Seal Kit
6-13.2
CUBEX CM78806 Arm Cylinder, 4.5 Stroke
6-14.1
CUBEX CM78806 Arm Cylinder, 4.5 Stroke
1 CM78806-001 1 Tube
2 CM78806-002 1 Rod
3 CM78806-003 1 Gland
4 CM78806-004 1 Piston
5 1 7/8-14UNF Self Locking Nut - Thin Height
6 1 - Piston Seal
7 1 - Rod Seal
8 1 - Rod Wiper
9 1 - O-ring
10 1 - Back-Up Ring
11 CM77100-RC 2 Retaining Ring
12 1 - O-ring
13 CM77100-SB 2 Spherical Bearing
14 CM78806-005 1 Rod End
15 1 7/8-14UNF Jam Nut
16 2 1/8-27NPT Grease Nipple
CM78806-SK 1 Seal Kit
6-14.2
Air Schematics and
Components
Section 7
CUBEX 10051SEC 7 Air Schematic and Components
7.2
CUBEX AS-10051 Air Schematic
7-1.1
CUBEX AS-10051 Air Schematic
7-1.2
CUBEX AS-10051 Air Schematic
7-1.3
CUBEX AS-10051 Air Schematic
7-1.4
CUBEX CP18322-1A Water Pump And Drive Assembly
7-2.1
CUBEX CP18322-1A Water Pump And Drive Assembly
7-2.2
CUBEX CP18322-1 Water Pump
7-3.1
CUBEX CP18322-1 Water Pump
7-3.2
CUBEX CP18322-1 Water Pump
7-3.3
CUBEX CP18322-1 Water Pump
40 CP18322-040 6 O-ring
41 CP18322-041 3 Cylinder
42 CP18322-042 3 O-ring
43 CP18322-043 3 Discharge Valve Seat, Quiet Valve
44 CP18322-044 3 Discharge Valve Quiet Valve
45 CP18322-045 3 Valve Spring
46 CP18322-046 3 Retainer, Quiet Valve
47 CP18322-047 4 Cylinder Bolt
48 CP18322-048 4/8 Washer - 0.060"
49 CP18322-049 4/8 Washer - 0.020"
50 CP18322-050 4/8 Washer - 0.012'
51 CP18322-051 1 Retainer Washer
52 CP18322-052 1 Discharge Manifold
53 CP18322-053 4 Hex Nut
54 CP18322-054 1 Plug
55 CP18322-055 4 Split Lock Washer
66 CP18322-066 3 Back-Up Ring
67 CP18322-067 1 Cup Inserter Tool (not shown)
* * CP18322-070 1 Discharge Valve Kit
*2 *2 CP18322-071 1 Sleeve & Seal Kit
*3 *3 CP18322-072 1 Short Cup Kit
*) CP18322-070 includes item numbers: 40, 42, 43, 44, 45, 46, 66
*2) CP18322-071 includes item numbers: 24, 25, 26, 27, 30
*3) CP18322-072 includes item numbers: 34A, 39, 40, 67
7-3.4
CUBEX CP18322-2 Water Pump Motor
7-4.1
CUBEX CP18322-2 Water Pump Motor
1 CP18322-201 5 Bolt
2 CP18322-202 1 End Cover
3 CP18322-203 1 - Commutator Seal
4 CP18322-204 5 - Seal Ring
5 CP18322-205 1 Commutator Assembly
6 1 Commutator Ring
7 CP18322-207 1 Manifold
8 CP18322-208 1 Rotor Set
9 CP18322-209 1 Wear Plate
10 CP18322-210 1 Drive Link
11 CP18322-211 1 Woodruff Key
12 CP18322-212 1 Coupling Shaft
13 CP18322-213 1 Bronze Bushing
14 CP18322-214 1 Thrust Washer
15 CP18322-215 1 Thrust Bearing
16 CP18322-216 1 - Inner Seal
17 CP18322-217 1 - Backup Washer
18 CP18322-218 1 Housing Assembly
19 CP18322-219 1 Outer Bearing
20 CP18322-220 1 - Dirt & Water Seal
CP18322-2SK 1 Seal Kit
7-4.2
CUBEX CM18215 Grease Injection Assembly
7-5.1
CUBEX CM18215 Grease Injection Assembly
7-5.2
CUBEX CP47038 Oil Cooler - Water Cooled
7-6.1
CUBEX CP47038 Oil Cooler - Water Cooled
1 1 Left Bonnet
2 2 Bracket
3 1 Left Gasket
4 1 Right Gasket
5 1 Right Bonnet
7-6.2
Electrical
Schematics and
Parts
Section 8
CUBEX 10051SEC 8 Electrical Schematics and Parts
8.2
CUBEX EGA10051 El. General Arrangement
8-1.1
CUBEX EGA10051 El. General Arrangement
1 Drill
1 CM19024.069 1 Cable Remote Drilling Control
2 CM19016.034 1 Cable Display Panel
3 CM19032.016 1 Cable-Rem. Set-up/Tram/Jacks Con.
4 CM19006.004 1 Cable Angle Display com-line (optional)
5 CM19024.075 1 Cable - Remote Operator
6 CM19006-021 1 Remote Accra-Feed Cable
7 CM19016.035 1 Cable-Carousel VJB
8 1 889D-F4AC-5
9 CM19016.036 1 Cable Tram Valve Harness
10 CM19024.047 1 Cable Setup Valve Harness
11 CM19024.046 1 Cable Drilling Valve Harness
12 CM19006.005.1 1 Cable 6 Pin Angle Sensor Com-line
8-1.2
CUBEX CM19750-007P El. Sch. Main Panel Power
8-2.1
CUBEX CM19750-007P El. Sch. Main Panel Power
8-2.2
CUBEX CM19750-007C1 El. Sch. Main Panel Control
8-3.1
CUBEX CM19750-007C1 El. Sch. Main Panel Control
8-3.2
CUBEX CM19750-007C2 El. Sch. Main Panel Control
8-4.1
CUBEX CM19750-007C2 El. Sch. Main Panel Control
8-4.2
CUBEX CM19055-148.1S Drilling Control Panel w/Car w/B/O
8-5.1
CUBEX CM19055-148.1S Drilling Control Panel w/Car w/B/O
8-5.2
CUBEX CM19055-182S Carousel Junction Box
8-6.1
CUBEX CM19055-182S Carousel Junction Box
8-6.2
CUBEX CM19055-516S Display Control Panel
8-7.1
CUBEX CM19055-516S Display Control Panel
8-7.2
CUBEX CM19055-533S Schem Setup Control Panel Dual Stinger w/Jack
8-8.1
CUBEX CM19055-533S Schem Setup Control Panel Dual Stinger w/Jack
8-8.2
CUBEX CM19055-904-1 El. Sch. Rem. I/O Card 1
8-9.1
CUBEX CM19055-904-1 El. Sch. Rem. I/O Card 1
8-9.2
CUBEX CM19055-904-2 El. Sch. Rem I/O Card 2
8-10.1
CUBEX CM19055-904-2 El. Sch. Rem I/O Card 2
8-10.2
CUBEX CM19055-904-3 El. Sch. Rem I/O Card 3
8-11.1
CUBEX CM19055-904-3 El. Sch. Rem I/O Card 3
8-11.2
CUBEX CM19055-904-TC Terminal Conn. Rem. I/O Panel
8-12.1
CUBEX CM19055-904-TC Terminal Conn. Rem. I/O Panel
8-12.2
CUBEX CM19055-912-0 El. Sch. Slot 1 Local I/O Panel
8-13.1
CUBEX CM19055-912-0 El. Sch. Slot 1 Local I/O Panel
8-13.2
CUBEX CM19055-912-1 El. Sch. Slot 2 Local I/O Panel
8-14.1
CUBEX CM19055-912-1 El. Sch. Slot 2 Local I/O Panel
8-14.2
CUBEX CM19055-912-2 El. Sch. Slot 5&6 Local I/O Panel
8-15.1
CUBEX CM19055-912-2 El. Sch. Slot 5&6 Local I/O Panel
8-15.2
CUBEX CM19055-912-3 El. Sch. Slot 7&8 Local I/O Panel
8-16.1
CUBEX CM19055-912-3 El. Sch. Slot 7&8 Local I/O Panel
8-16.2
CUBEX CM19055-912-4 El Sch. Slot 9 Local I/O Panel
8-17.1
CUBEX CM19055-912-4 El Sch. Slot 9 Local I/O Panel
8-17.2
CUBEX CM19055-912-5 El. Sch. Local I/O Panel
8-18.1
CUBEX CM19055-912-5 El. Sch. Local I/O Panel
8-18.2
CUBEX CM19055-912-E1 Pwr Supply & CPU Local I/O Panel
8-19.1
CUBEX CM19055-912-E1 Pwr Supply & CPU Local I/O Panel
8-19.2
CUBEX CM19055-912-E2 El. Sch. Slot 3&4 Local I/O Panel
8-20.1
CUBEX CM19055-912-E2 El. Sch. Slot 3&4 Local I/O Panel
8-20.2
CUBEX 10051ELMISC Electrical Miscellaneous
8-21.1
CUBEX 10051ELMISC Electrical Miscellaneous
8-21.2
10051-12-00
NUMERICAL INDEX
NI 1
10051-12-00
NUMERICAL INDEX
NI 2
10051-12-00
NUMERICAL INDEX
NI 3
10051-12-00
NUMERICAL INDEX
NI 4
10051-12-00
NUMERICAL INDEX
NLF-0500 6-10.2
NLF0875 6-12.2,6-13.2
PWK53NFSS 2-10.2,8-7.2
RH0EB0 2-7.2
RH0H4 2-7.2
RH0SVD 2-7.2
RH1B-U-AC120 2-7.2
RH1B-U-DC24 2-7.2
RH2B-U-DC24 2-12.2,2-7.2
RH2LB-U-120VAC 2-7.4
RH4B-AC120 2-7.2
SE0800886 2-7.2
SECTION 1 .2
SETA6 2-7.4
SFA-101 2-12.2
SFA-202 2-7.2
SH1B-05U 2-7.2
SH2B-05U 2-12.2,2-7.2
SH3B-05 2-7.4
SH4B-05U 2-7.2
SLF-9-03 2-9.2
SLF-9-03-8 2-12.2
SQC0750 4-5.2
SQC0750X2 4-4.2
T50B2 2-7.2
VT59 2-7.4
W58-XB1A4A-20 2-7.2
Y92A-96N 2-7.2
Z5.522.8553.0 2-7.2
Z5.592.1252.0 2-10.2,2-11.2,2-12.2
2-13.2,2-8.2,2-9.2
8-5.2,8-7.2,8-8.2
Z7.419.6228.0 2-11.2,8-8.2
NI 5