Professional Documents
Culture Documents
Swedge Analysis Information SWEDGE - Surface Wedge Stability Analysis
Swedge Analysis Information SWEDGE - Surface Wedge Stability Analysis
Project Summary
Analysis Results
Analysis type - Combinations
Number of Combinations 36
Number of Valid Wedges 25
Number of Invalid Wedges 11
Number of Failed Wedges 0
Number of Stable Wedges 25
Project
SWEDGE - Surface Wedge Stability Analysis
Analysis Description
Drawn By Company
Water Pressures/Forces
Average pressure [MPa] Force [MN]
Joint 1 0.009 0.093
Joint 2 0.009 0.027
Failure Mode
Sliding on intersection line (joints 1&2)
Trace Lengths
Slope Face [m] Upper Face [m]
Joint 1 6.555 5.101
Joint 2 3.792 1.632
Persistence
Project
SWEDGE - Surface Wedge Stability Analysis
Analysis Description
Drawn By Company
Intersection Angles
Slope Face Upper Face
Joint 1 & Joint 2 62.827 111.000
Joint 1 & Crest 34.963 15.000
Joint 2 & Crest 82.210 54.000
Project
SWEDGE - Surface Wedge Stability Analysis
Analysis Description
Drawn By Company
Bolt Data
Bolt 1 Data
Model active
Trend [deg] 182.000
Plunge [deg] 15.000
Length [m] 9.000
Anch. Length [m] 8.426
Capacity [MN] 0.350
Project
SWEDGE - Surface Wedge Stability Analysis
Analysis Description
Drawn By Company
Project
SWEDGE - Surface Wedge Stability Analysis
Analysis Description
Drawn By Company