Professional Documents
Culture Documents
GRT655 GRT655L Product Guide Imperial
GRT655 GRT655L Product Guide Imperial
GRT655 GRT655L Product Guide Imperial
GRT655L
2.5x1.5
MADE
IN
AMERICA
GRT655/GRT655L
Product guide
ASME B30.5
Imperial 85%
Features
• 51 t (55 Ust) capacity • 7,92 m - 13,7 m (26 ft - 45 ft) manual offsettable
telescopic swingaway extension
• GRT655: 10,6 m - 34,8 m (34.9 ft - 114.3 ft)
four-section full-power boom • Intuitive, user friendly controls with electronic
joysticks and operator customizable function speeds
• GRT655L: 10,8 m - 43,0 m (35.3 ft - 141.2 ft)
five-section full-power boom • Full vision cab with 20° tilt
GROVE GRT655/GRT655L
The GRT655/GRT655L was designed after gathering feedback from crane owners
and operators to ensure that it is loaded with the features and reliability you
demand.
Features
Tilt cab
The tilt cab is designed with operator comfort and productivity
in mind. Offering a full-vision design and 20° tilt for improved
viewing at high boom angles. The tilt/telescoping steering
wheel can also be positioned for optimum use.
Boom
Two boom options provide you with the versatility you demand.
The GRT655 comes equipped with a 10,6 m - 34,8 m (34.9
ft - 114.3 ft) four-section, full-power boom. The GRT655L is
equipped with a 10,8 m - 43,0 m (35.3 ft - 141.2 ft) five-section,
full-power boom. Optional 7,92 m - 13,7 m (26 ft - 45 ft) manual
offsettable telescopic swingaway extension adds to your lifting
capabilities.
Manitowoc Crane Care when you need it. Manitowoc Finance helps you get right to
The assurance of the world’s most advanced crane work generating profits for your business.
service and support to get you back to work fast. Financial tools that help you capitalize on
opportunity with solutions that fit your needs.
Contents
Working Range
Subhead
Dimensions ..................................................................................................................................................................... 5
Weights .......................................................................................................................................................................... 7
Specifications................................................................................................................................................................... 17
Symbols glossary.............................................................................................................................................................. 19
4
Dimensions
GRT655
A B C D E F G H J K L M
Four-
Wheel 10 210 mm 9860 mm 7082 mm 6435 mm 6140 mm 3813 mm 3513 mm 2464 mm 3079 mm 3514 mm
Steer 25° 21°
(402") (388") (279") (253") (242") (150") (138") (97") (121") (138")
A B C D E F G H J K L M
Two-
Wheel
Steer 13 928 mm 13 450 mm 11 125 mm 10 386 mm 10 138 mm 7888 mm 6688 mm 2439 mm 19° 19°
2938 mm 7577 mm
(548") (530") (438") (409") (399") (311") (263") (96") (116") (298")
A B C D E F G H J K L M
Four-
Wheel
Steer 10 210 mm 9860 mm 7082 mm 6362 mm 6116 mm 3837 mm 3587 mm 2439 mm
19° 19°
2938 mm 3526 mm
(402") (388") (279") (250") (241")
GRT655 (151") (141") (96") (116”) (139")
2990
[118]
FRAME
L
WIDTH
3079
[121]
STANDARD
TIRES WIDTH
2938
[116]
H TRACK
NARROW
TIRES WIDTH
28° 28°
G
E M INSIDE CURB
OUTSIDE INSIDE CURB CLEARANCE
B R4229
TURN CLEARANCE
RADIUS F CL ROTATION [166]
A C D INSIDE TURN TAIL SWING
OUTSIDE RADIUS
CURB CLEARANCE 12 660
[498]
4-SECTION BOOM
3478
[137]
J K
470
[18.5]
CL ROTATION
1778 2032
[70] 3810 [80]
[150]
8072
[318]
4578 8084
[180] [318]
Grove GRT655/GRT655L 5
Dimensions
GRT655L
A B C D E F G H J K L M
Four-
Wheel 10 309 mm 9969 mm 7082 mm 6435 mm 6140 mm 3813 mm 3513 mm 2464 mm 3079 mm 3514 mm
Steer 25° 21°
(406") (392") (279") (253") (242") (150") (138") (97") (121”) (138")
A B C D E F G H J K L M
Four-
Wheel
Steer 10 309 mm 9969 mm 7082 mm 6362 mm 6116 mm 3837 mm 3587 mm 2439 mm
19° 19°
2938 mm 3526 mm
(406") (392") (279") (250") (241") (151") (141") (96") (116”) (139")
GRT655L
2990
[118]
FRAME
WIDTH L
3079
[121]
STANDARD
TIRES WIDTH
2938
[116]
H TRACK NARROW
TIRES WIDTH
28° 28°
G
INSIDE CURB
M R4229
E CL ROTATION CLEARANCE
INSIDE CURB [166]
B OUTSIDE CLEARANCE
TURN F TAIL SWING
A RADIUS INSIDE TURN
C D RADIUS
OUTSIDE
CURB CLEARANCE 12 788
[503]
5-SECTION BOOM
3478
[136.9]
J K
367 470
[14] [18.5]
CL ROTATION
6
Dimensions and weights
GRT655 and GRT655L
Weights - GRT655
Gross Front Rear
kg lb kg lb kg lb
Basic Machine: including four- section 34,8 m (114.3 ft) main
boom, main hoist with 180 m (590 ft) of wire rope, IPO, full pinned
32 779 72,263 13 787 30,395 18 991 41,868
counterweight, air conditioner, full aluminum decking, and hoist
access platform and Tier 4F engine
Add: 51 t (55 USt) five-sheave hook block stowed in trough 425 937 439 968 -14 -31
Add: 6.0 t (6.6 USt) headache ball 105 231 168 371 -64 -140
Add: Auxiliary Hoist + 180 m (590 ft) of wire rope ILO IPO 25 54 -4 -9 29 63
Weights - GRT655L
Gross Front Rear
kg lb kg lb kg lb
Add: 6.0 t (6.6 USt) headache ball 105 231 168 371 -64 -140
Add: Auxiliary Hoist + 180 m (590 ft) of wire rope ILO IPO 25 54 -4 -9 29 63
Grove GRT655/GRT655L 7
Working range
GRT655
180
0° offset
15° offset
170 45' ext.
30° offset
160
114.3'
120
105.5'
110
96.7'
100 70° 87.8'
90 60° 79.0'
80 50° 70.2'
70 40° 61.4'
52.5'
60
30° 43.7'
50
20° 34.9'
40
80° MAX
30 10° BOOM
20 ANGLE
0°
10
0
160 140 120 100 80 60 40 20 0
150 130 110 90 70 50 30 10 AXIS OF
ROTATION
OPERATING RADIUS IN FEET FROM AXIS OF ROTATION
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
8
Load chart
GRT655
Pounds
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Grove GRT655/GRT655L 9
Load chart
GRT655
Pounds
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
10
Load chart
GRT655
35 ft - 114 ft 12,300 lb 360° Stationary 35 ft - 114 ft 12,300 lb Over Front Pick and carry
up to 1 mph
23.5 x 25 or 18.0x25
Pounds Pounds
1. Capacities are in pounds and do not exceed 75% of tipping loads as 6. Axle lockouts must be functioning when lifting on rubber.
determined by test in accordance with SAE J765.
7. All lifting depends on proper tire inflation, capacity and
2. Capacities are applicable to machines equipped with OTR DL-3 E-3/L-3 condition. Capacities must be reduced for lower tire inflation
- 23.5x25 (24 ply) tires at 87 psi cold inflation pressure, or OTR CL735 pressures. See lifting capacity chart for tire used. Damaged tires
E-3/L-3 - 18.0x25 (28 ply) at 83 psi cold inflation pressure. are hazardous to safe operation of crane.
3. Capacities are applicable only with machine on firm level surface. 8. Creep - not over 200 ft of movement in any 30 minute period and
not exceeding 1 mph.
4. On rubber lifting with boom extension not permitted.
5. For pick and carry operation, boom must be centered over front of
machine, mechanical swing lock engaged and load restrained from
swinging.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Grove GRT655/GRT655L 11
Working range
GRT655L
200 0° offset
15° offset
30° offset 45' ext.
190
160
141.2'
115.0'
120 109.1'
110
96.8'
100
70° 84.5'
90 60°
72.2'
80 50°
70 40° 59.9'
60 47.6'
30°
50
35.3'
20°
40
30 80° MAX
10°
BOOM
20 ANGLE
0°
10
0
AXIS OF
180 160 140 120 100 80 60 40 20 0 ROTATION
170 150 130 110 90 70 50 30 10
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
12
Load chart
GRT655L
Pounds
Pounds
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
14
Load chart
GRT655L
35 ft - 141 ft 12,300 lb 360° Stationary 35 ft - 141 ft 12,300 lb Over Front Pick and carry
up to 1 mph
23.5 x 25 or 18.0x25
Pounds Pounds
Max. boom length at 0° boom angle (no load) 59.9 ft Main Boom Length in Feet
Boom
NOTE: ( ) Boom angles are in degrees. Angle
35.3 47.6 59.9 72.2
1. Capacities are in pounds and do not exceed 75% of tipping loads as 6. Axle lockouts must be functioning when lifting on rubber.
determined by test in accordance with SAE J765.
7. All lifting depends on proper tire inflation, capacity and
2. Capacities are applicable to machines equipped with OTR DL-3 E-3/L-3 - condition. Capacities must be reduced for lower tire inflation
23.5x25 (24 ply) tires at 87 psi cold inflation pressure, or OTR CL735 E-3/L-3 pressures. See lifting capacity chart for tire used. Damaged
- 18.0x25 (28 ply) at 83 psi cold inflation pressure. tires are hazardous to safe operation of crane.
3. Capacities are applicable only with machine on firm level surface. 8. Creep - not over 200 ft of movement in any 30 minute period
4. On rubber lifting with boom extension not permitted. and not exceeding 1 mph.
5. For pick and carry operation, boom must be centered over front of machine,
mechanical swing lock engaged and load restrained from swinging.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Grove GRT655/GRT655L 15
Load handling
51 t (55 USt), 5-sheave 425 kg (937 lb+) 7,9 m - 13,7 m 1315 kg 1769 kg
*7,9 m (26 ft)
(26 ft - 45 ft) (2900 lb) (3900 lb)
32 t (35 USt), 4-sheave 388 kg (855 lb+) Telescopic boom 1678 kg 2359 kg
extension *13,7 m (45 ft)
(3700 lb) (5200 lb)
17 t (18.7 USt), 1-sheave 261 kg (575 lb+)
*Reduction of main boom capacities
6 t (6.6 USt) overhaul ball 105 kg (231 lb+)
(no deduct required for stowed boom extension)
+Refer to rating plate for actual weight. NOTE: All load handling devices and boom attachments are considered part of
the load and suitable allowances MUST BE MADE for their combined weights.
Tire inflation - PSI (bar) Weights are for Grove furnished equipment.
Lifting service, general NOTE: When operating at temperatures below -40°F, capacities shall be derated
Size 3.6% of rated load for each degree Fahrenheit below -40°F without shock load.
MFG/ (front travel and extended
TRA Code travel
Model and
rear) Static, creep
23.5 x 25
Standard OTR/DL-3 E-3/L-3 87 (6)
(24 ply)
Hoist performance
OTR/ 18.0 x 25 Hoist line pulls
Narrow E-3/L-3 83 (5.7)
CL735 (28 ply) Drum capacity
Two speed hoist
Wire
rope Low High
Line pulls and reeving information layer Layer Total
Available Available m (ft) m (ft)
Permissible Nominal Cable kg (lb) kg (lb)
Hoists Cable Specs.
Line Pulls Length
1 7515 (16,568) 3372 (7435) 29 (95) 29 (95)
16 mm (5/8 in) 35x7
Class EEIPS + Rotation 2 6828 (15,053) 3064 (6756) 31,7 (104) 60,7 (199)
Main and 5552 kg
Resistant Min. Breaking 180 m (590 ft)
Auxiliary (12,240 lb)* 3 6256 (13,792) 2808 (6190) 34,7 (114) 95,1 (312)
strength 27 760 kg
(61,200 lb)
4 5772 (12,726) 2590 (5711) 37,5 (123) 132,6 (435)
18 mm K100™ Hoist Rope 5 5358 (11,813) 2404 (5301) 40,5 (133) 173,1 (568)
Main and Min. Breaking strength 5780 kg
185 m (606 ft)
Auxiliary (12,740 lb)*
28 895 kg (63,700 lb) 6 4999 (11,022) 2243 (4946) 43,3 (142) 216,4 (710)
The approximate weight of 16 mm (5/8 in) wire rope is 1,34 kg/m (0.90 lb/ft). *Refer to Line Pulls and Reeving Information table for max. lifting capacity of wire
The approximate weight of 18 mm synthetic rope is 0,24 kg/m (0.16 lb/ft). rope.Synthetic rope layer height may vary and may reduce available line pull per
*With certain boom and hoist tackle combinations, the allowable line pull may be limited by layer.
hoist performance. Refer to Hoist Performance table for lift planning to ensure adequate hoist
performance on drum rope layer required.
Rear axle
360° Centerline of 360°
Over side oscillation
outrigger support lockouts must
Centerline be set to
of boom maintain 360°
Boom capacities
Longitudinal centered
centerline over front
CG of load of crane
Over + + Over
front rear
Front
See note
at bottom
Bold lines determine the limiting position of any load for operation within working areas indicated.
16
Specifications
Superstructure
Cab
Operator controlled 20° hydraulic tilt, Full vision, all steel fabricated with
Boom (GRT655) acoustical lining and tinted safety glass throughout. Deluxe seat with headrest
10,6 m - 34,8 m (34.9 ft - 114.3 ft) four-section, full-power boom. incorporates armrest-mounted electronic programmable single-axis or
Synchronized extension and retraction. Maximum tip height: 38,1 m (125 ft) dual axis controllers and a jog dial for easier data input. Tilt/telescoping steering
wheel with various controls incorporated into the steering column. Other
standard features include: hot water heater, cab circulating air fan, sliding side
Boom (GRT655L) and opening rear window, sliding skylight with electric wiper and sunscreen,
10,8 m- 43,0 m (35.3 ft - 141.2 ft) five-section, full-power boom. electric windshield wash/wipe, fire extinguisher, seat belt, air conditioning, and
Synchronized extension and retraction. Maximum tip height: 46,0 m (151 ft) dual cab mounted work lights.
Crane Control System (CCS) Maximum hoist single line speed (no load):
Combining the “Rated Capacity Limiter” (RCL), displaying all boom positions, 148 m/min (487 ft/min)
slew angle, actual load, rated load, and percentage of outrigger extension within
one display screen and the crane operating indicators, levels, warnings, faults, Rope construction:
and more in a separate display screen. Electric joystick controllers with 35 x 7 rotation – resistant
Jog dial input. Working range limiter and data logger capability.
Rope diameter:
16 mm (5/8 in)
Counterweight Rope length:
5579 kg (12,300 lb) one piece, pinned to superstructure. Main hoist: 180 m (590 ft)
Aux. hoist : 180 m (590 ft)
Grove GRT655/GRT655L 17
Specifications
Carrier
Steering
Fully independent power steering.
Chassis Front: Fully hydraulic steering wheel controlled.
Parallel box section fabricated from high strength, low alloy steel with integral Rear: Fully hydraulic via separate momentary switch. Provides four steering
outrigger boxes, front and rear, tie-down, and towing lugs. modes, front only, rear only, coordinated, and crab. Rear steer not aligned
indicator.
Outrigger system Outside 4ws coordinated steer radius:
Four hydraulic telescoping single stage double box beam outriggers with 23.5 x 25: 6,14 m (21.0 ft)
inverted jack cylinders and integral jack holding valves. Three position settings, 18.0 x 25: 6,09 m (20.8ft)
0%, 50%, and fully extended. Polymer outrigger floats 500 mm (19.6 in) Inside 4ws coordinated steer radius:
diameter. Outrigger monitoring system with outrigger beam position display 23.5 x 25: 3,81 m (12.5 ft)
on R.C.L. screen. Maximum outrigger pad load: 34 110 kg (75,200 lb) 18.0 x 25: 3,83 m (12.5 ft)
18
Symbols glossary
Extension
Boom length Hydraulic system Steering
Grove GRT655/GRT655L 19
Manitowoc Cranes
Regional headquarters