RA Bill Peti

You might also like

Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1of 86

1st RA Bill .

Detail Measurement.
NAME OF ROAD :-Peti to Ghumarra
LENGTH OF ROAD:- 3.210 K.M.
Package No. - CG 15-118
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To

1 2.1 Setting Out


Setting Out work complete with construction of bench
mark (Min 1 per km) working benchmark (Min 4 per km)
and near all bridges and cross-drainage works made of
bricks/stone masonary or concrete and reference pillars
made of precast concrete poles/concrete filled 100 mm
dia A.C.pipe @ 100 m interval of as required on both
sides of the formation width, marking on central line,
setting out curves and recording of central line levels
and other required levels and distances etc. including
setting out of cross-drainage structures & bridges with
required reference pillars and marking etc. as directed
by Engineer-in-Charge.

0 2000 2000 2000.000


2.000 Km 12300

2 2.3(A) Clearing and grubbing road land including uprooting wild


vegetation, grass,bushes, shrubs,saplings and trees of girth
up to 300mm, removal of stumps of such trees cut earlier and
disposal of unserviceable materials and stacking of
serviceable material to be used or auctioned up to a lead of
1000 m including removal and disposal of top organic soil not
exceeding 150mm in thickness as per Technical Specification
Clause 201. By Mechanical mans in area of non thormy
jungle.

0 2000 2000 4.5 9000.00


9000.00 Sqm 2.6 23400
3 3.1 Scarifying existing granular/bituminous surface upto a depth
of 100 mm and disposal of scarified material with a lift upto 3
m and lead upto 1000 m as per Technical Specification
Clause 301.4.

Page 1 of 86
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
0 450 1 450 2.95 1327.500
900 450 900 1 450 2.85 1282.500
1100 1300 1 200 3.05 610.000
1400 1650 1 250 2.95 737.500
3957.500 Sqm 13 51448

Deduction for Issue the material (Oversize metal) for


scarifiying of Existing WBM (35%) 3957.5 0.1 395.750
-138.513 Cum 200 -27703

4 3.2 Loosening, Levelling and Compacting original ground


supporting embankment to facilitate placement of first layer of
embankment,scarified to a depth of 150 mm mixed with water
at OMC and then compacted by rolling so as to achieve
minimum dry density as given in Tables 300.1 and 300.2 for
embankment construction as per Technical Specification
Clause 301.4.1.
Avg. Avg.
0 400 400 5.0 0.15 300.00
450 1000 550 5.0 0.15 412.50
1000 1500 500 5.0 0.15 375.00
1500 2000 500 5.0 0.15 375.00
Total 1462.500 Cum 15 21938

Page 2 of 86
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
5 9.14 Providing and fixing of typical PMGSY informatory sign
(B) board with Logo as per MORD specifications and
drawing. Three MS Plates of 1.6 mm thick, top and
middle plate duly welded with MS flat iron 25mm x 5m
size on back on edges. The lower plate will be welded
with MS angle iron frame of 25mm x 25mm x 5mm. The
angle iron frame of the lower most plate and flat iron
frame of middle plate will be welded to 2 nos. 75mm x
75 mm of 12 SWG sheet tubes posts duly embedded in
cement concrete M-15 grade blocks of 450mm x
450mm x 600mm, 600mm below ground level. The top
most diamond plate will be welded to middle plate by
47mm x 47mm of 12 SWG steel plate tube. All M.S.
will be stove enameled on both sides. Lettering and
printing arrows, border etc. will be painted with ready
mixed synthetic enamel paint of superior quality in
required shade and colour. All sections of framed posts
and steel tube will be painted with primer and two coats
of epoxy paint as per drawing Clause 1701 and
Annexure 1700.1

1 1.000 Each 12102 12102

6 9.15( Providing and fixing of typical PMGSY Citizen Board as


a) per MORD specifications and drawing. Three MS
Plates of 1.6 mm thick, top and middle plate duly
welded with MS flat iron 25mm x 5m size on back on
edges. The top most diamond plate will be welded to
middle plate by 47mm x 47mm of 12 SWG steel plate
tube. All M.S. will be stove enameled on both sides.
Lettering and printing arrows, border etc. will be painted
with ready mixed synthetic enamel paint of superior
quality in required shade and colour. All sections of
framed posts and steel tube will be painted with primer
and two coats of epoxy paint as per drawing Clause
1701 and Annexure 1700.1

1 1 Each 12000 12000

Page 3 of 86
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
7 3.5(i) Excavation in cutting in soil with lead up to 50m excavation for
roadway in soil for carrying of cut earth to embankment site
with all lift and lead uo to 50m as per technical specification As per Volume sheet.
clause 302.3
1010.875
Total 1010.875 Cum 64 64696

8 3.3(i) Construction of embankment with approved material


disposited at site from roadway cutting and excavation from
drain and foundation of other structures graded and
compacted to meet requirement of tables 300.1 and 300.2 as
per Technical Specification Clause 301.5.

As per Volume sheet.


1010.875
1010.875 Cum 34 34370

9 3.4(i) Construction of embankment with approved material


obtained form borrow pits, transported to site,
spreading, grading to required slopes and compacting
to meet requirement of Tables 300.1 & 300.2 with a
lead up to 250 m as per technical specifications clause
301.5

As per Volume sheet. 3071.738


Deduct Item No. 3.3 (i) -1010.875
Net Qty. of E.W 2060.863 Cum 94 193721

10 3.4(ii) Construction of embankment with approved material


obtained from borrow pits, transporting to site,
spreading, grading to required slope and compacting to
meet requirement of Tables 300.1 and 300.2 (Beyond
250m)with all leads as per Technical Specification
Clause 301.5(Having CBR more than 5)

Selected Soil 1st Layer 0 400 1 400 8.040 0.150 482.40


450 1000 1 550 8.040 0.150 663.30
1000 1500 1 500 8.040 0.150 603.00
1500 2000 1 500 8.040 0.150 603.00
2351.70 Cum 129 303369

Page 4 of 86
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
11 7.1( I Earthwork in excavation for structures as per Drawing
) and Technical Specifications Clause 305.1 including
(i) setting out, construction of shoring and bracing,
removal of stumps and other deleterious material and
disposal up to a lead of 50m dressing of sides and
bottom and backfilling in trenches with excavated
suitable material ordinary soil up to 3m depth.

At Chainage 36m (1x1000mm dia HPC) (3.4+1.5)/2


Return Wall 2 6.45 2 2.45 63.210
Pipe Portion 1 3.8 1.53 2.2 12.791
Inner Pipe 1 3.8 1.53 0.15 0.872
76.873 Cum 160 12300

12 7.10 Providing concrete for plain/reinforced concrete in open


(ii) foundation complete as per drawings and technical
specifications Clause 802, 803, 1202 & 1203P.C.C
grade M 15(Nominal mix (1:2.5:5)
At Chainage 36m (1x1000mm dia HPC)
Up to G.L.
Return Wall 2 6.45 2 0.15 3.870
Pipe Joint Portion 2 0.6 1.53 0.15 0.275
(1.7+1.3)/2
Up to Wall Bed Level 2 6.15 1.5 1.2 22.140
26.285 Cum 3247 85349

13 7.18 Plain/reinforced cement concrete in substructure


(i) complete as per Drawings and Technical Specification
Clauses 802,804, 805, 806, 807, 1202 and 1204
P.C.C. grade M 15 nominal mix 1:2.5:5.

(1.3+0.4)/2
Wall Bed Level to top Level 2 6.15 0.85 2.65 27.706
(1.3+0.9)/2
Deduct Pipe Portion -2 1.1 0.785 1.513 -2.613
25.093 Cum. 3434 86169

Page 5 of 86
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
14 7.3(ii) Bedding for Pipe
Type B (First Class) Bedding
Laying (First Class) bedding on well compacted sand,
moorum or approved
At Chainage granular dia
36m (1x1000mm material
HPC)as per Clause (4.9+4.8)/2
1105 (ii)
Pipe Portion 1 4.85 1.53 0.15 1.113
Deduction -2 0.6 1.53 0.15 -0.275
Total 0.838 Cum 558 467

15 7.6 Providing & laying I. S. marked or D.G.S. & D.


( C ) Inspected RCC pipes of NP 3 standard (IS-458-1971)
for culverts I/c loading, un loading, carting, all handling,
filling the joints in cement mortar 1:2 etc. complete as
per Drawing & Specification.
1000 mm dia HPC
At Chainage 36m 1 7.5 7.500
Total 7.500 Rmt 4559 34193

16 7.23 Backfilling behind abutment, wing wall and return wall


(ii) complete as per drawings and technical specification
Clause 1204.3.8. Granular materials.
At Chainage 36m (1x1000mm dia HPC) (0.15+0.75)/2
upto G.L.
Behind Wall 2 6.45 0.45 1.2 6.966
Above GL (4.9+6)/2
Pipe Bed Level up to RTL 1 5.45 1.53 1.65 13.759
(4.9+5.7)/2
Deduct Pipe -1 5.3 0.785 2.46 -10.235
Total 10.490 Cum 569 5969

Gross Amount 913787


Above SOR 23.13% (+) 211359
Net Amount 1125146

Page 6 of 86
1st Running Bill
NAME OF ROAD :-Peti to Ghumrra
LENGTH OF ROAD:- 3.210 K.M.
Package No. - CG 15-118

s.N SOR Ref. MB Up to Date Since Previous Since Last


Particurs of item Unit Rate Remark
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12 13
1 2.1 Setting Out
Setting Out work complete with construction of
bench mark (Min 1 per km) working benchmark
(Min 4 per km) and near all bridges and cross-
drainage works made of bricks/stone masonary or
concrete and reference pillars made of precast
concrete poles/concrete filled 100 mm dia A.C.pipe
@ 100 m interval of as required on both sides of
the formation width, marking on central line, setting
out curves and recording of central line levels and
other required levels and distances etc. including
setting out of cross-drainage structures & bridges
with required reference pillars and marking etc. as
directed by Engineer-in-Charge.

Km 12300.00 2.000 24600 2.000 24600


2 2.3(A) Clearing and grubbing road land including uprooting wild
vegetation, grass,bushes, shrubs,saplings and trees of
girth up to 300mm, removal of stumps of such trees cut
earlier and disposal of unserviceable materials and
stacking of serviceable material to be used or auctioned
up to a lead of 1000 m including removal and disposal of
top organic soil not exceeding 150mm in thickness as
per Technical Specification Clause 201. By Mechanical
mans in area of non thormy jungle.

Sqm 2.60 9000.000 23400 9000.000 23400


3 3.1 Scarifying existing granular/bituminous surface upto a
depth of 100 mm and disposal of scarified material with a
lift upto 3 m and lead upto 1000 m as per Technical
Specification Clause 301.4. Sqm 13.00 3957.500 51448 3957.500 51448
Deduction for Issue the material (Oversize metal) for
scarifiying of Existing WBM (35%) Cum -200.00 138.513 -27703 138.513 -27703

7
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate Remark
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12 13
4 3.2 Loosening, Levelling and Compacting original ground
supporting embankment to facilitate placement of first
layer of embankment,scarified to a depth of 150 mm
mixed with water at OMC and then compacted by rolling
so as to achieve minimum dry density as given in Tables
300.1 and 300.2 for embankment construction as per
Technical Specification Clause 301.4.1.

Cum 15.00 1462.500 21938 1462.500 21938


5 7.1( I) Earthwork in excavation for structures as per
(i) Drawing and Technical Specifications Clause 305.1
including setting out, construction of shoring and
bracing, removal of stumps and other deleterious
material and disposal up to a lead of 50m dressing
of sides and bottom and backfilling in trenches with
excavated suitable material ordinary soil up to 3m
depth.
Cum 160.00 76.873 12300 76.873 12300

8
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate Remark
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12 13
6 9.14 Providing and fixing of typical PMGSY informatory
(B) sign board with Logo as per MORD specifications
and drawing. Three MS Plates of 1.6 mm thick, top
and middle plate duly welded with MS flat iron
25mm x 5m size on back on edges. The lower
plate will be welded with MS angle iron frame of
25mm x 25mm x 5mm. The angle iron frame of the
lower most plate and flat iron frame of middle plate
will be welded to 2 nos. 75mm x 75 mm of 12 SWG
sheet tubes posts duly embedded in cement
concrete M-15 grade blocks of 450mm x 450mm x
600mm, 600mm below ground level. The top most
diamond plate will be welded to middle plate by
47mm x 47mm of 12 SWG steel plate tube. All
M.S. will be stove enameled on both sides.
Lettering and printing arrows, border etc. will be
painted with ready mixed synthetic enamel paint of
superior quality in required shade and colour. All
sections of framed posts and steel tube will be
painted with primer and two coats of epoxy paint
as per drawing Clause 1701 and Annexure 1700.1

Each 12102.00 1.000 12102 1.000 12102


7 9.15( Providing and fixing of typical PMGSY Citizen
a) Board as per MORD specifications and drawing.
Three MS Plates of 1.6 mm thick, top and middle
plate duly welded with MS flat iron 25mm x 5m size
on back on edges. The top most diamond plate
will be welded to middle plate by 47mm x 47mm of
12 SWG steel plate tube. All M.S. will be stove
enameled on both sides. Lettering and printing
arrows, border etc. will be painted with ready mixed
synthetic enamel paint of superior quality in
required shade and colour. All sections of framed
posts and steel tube will be painted with primer and
two coats of epoxy paint as per drawing Clause
1701 and Annexure 1700.1

Each 12000.00 1.000 12000 1.000 12000

9
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate Remark
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12 13
8 3.5(i) Excavation in cutting in soil with lead up to 50m
excavation for roadway in soil for carrying of cut earth to
embankment site with all lift and lead uo to 50m as per
technical specification clause 302.3 Cum 64.00 1010.875 64696 1010.875 64696
9 3.3(i) Construction of embankment with approved material
disposited at site from roadway cutting and excavation
from drain and foundation of other structures graded and
compacted to meet requirement of tables 300.1 and
300.2 as per Technical Specification Clause 301.5.

Cum 34.00 1010.875 34370 1010.875 34370


10 3.4(i) Construction of embankment with approved
material obtained form borrow pits, transported to
site, spreading, grading to required slopes and
compacting to meet requirement of Tables 300.1 &
300.2 with a lead up to 250 m as per technical
specifications clause 301.5
Cum 94.00 2060.863 193721 2060.863 193721
11 3.4(ii) Construction of embankment with approved material
obtained from pits construction of embakment with
approved material obtained from borrow pits with a lift up
to 1.5m, transporting to site, spreading, grading to
required slope and compacting to meet requirement of
tables 300.1 and 300.2 with a lead up to 1000m as per
Technical Specification Clause 301.5.

Cum 129 2351.700 303369 2351.700 303369


12 7.10 Providing concrete for plain/reinforced concrete in
(ii) open foundation complete as per drawings and
technical specifications Clause 802, 803, 1202 &
1203P.C.C grade M 15(Nominal mix (1:2.5:5)
Cum 3247.00 26.285 85349 26.285 85349
13 7.18 Plain/reinforced cement concrete in substructure
(i) complete as per Drawings and Technical
Specification Clauses 802,804, 805, 806, 807,
1202 and 1204
P.C.C. grade M 15 nominal mix 1:2.5:5. Cum 3434.00 25.093 86169 25.093 86169
14 7.3(ii) Bedding for Pipe
Type B (First Class) Bedding
Laying (First Class) bedding on well compacted
sand, moorum or approved granular material as
per Clause 1105 (ii) Cum 558.00 0.838 467 0.838 467

10
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate Remark
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12 13
15 7.6 Providing & laying I. S. marked or D.G.S. & D.
( C ) Inspected RCC pipes of NP 3 standard (IS-458-
1971) for culverts I/c loading, un loading, carting,
all handling, filling the joints in cement mortar 1:2
etc. complete as per Drawing & Specification. Rmt 4559.00 7.500 34193 7.500 34193
16 7.23 Backfilling behind abutment, wing wall and return
(i) wall complete as per drawings and technical
specification Clause 1204.3.8. Granuler materials.
Cum 569 10.490 5969 10.490 5969
Total 938387 0 938387
Add Above SOR 23.13% (+) 217049 0 217049
Grand Total 1155436 0 1155436

11
2nd RA Bill .
Detail Measurement.
NAME OF ROAD :-Peti to Ghumarra
LENGTH OF ROAD:- 3.210 K.M.
Package No. - CG 15-118
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To

1 2.3(A) Clearing and grubbing road land including uprooting


wild vegetation, grass,bushes, shrubs,saplings and
trees of girth up to 300mm, removal of stumps of such
trees cut earlier and disposal of unserviceable
materials and stacking of serviceable material to be
used or auctioned up to a lead of 1000 m including
removal and disposal of top organic soil not exceeding
150mm in thickness as per Technical Specification
Clause 201. By Mechanical mans in area of non
thormy jungle.
2000 2200 200 4.5 900.00
2400 2500 100 4.5 450.00
1350.00 Sqm 2.6 3510
2 2.11 Dismantling of Cement Concrete Pavements
Dismantling of cement concrete pavements and
breaking to pieces not exceeding 0.02 cum in volume
and stock piling at designated locations and disposal of
dismantled materials upto a lead of 1000 m, stacking
serviceable and unserviceable materials separately, as
per Technical Specification Clause. 202
Av.
2200 2315 1 115 3 0.12 41.40 Cum 1530
3 3.1 Scarifying existing granular/bituminous surface upto a
depth of 100 mm and disposal of scarified material with
a lift upto 3 m and lead upto 1000 m as per Technical
Specification Clause 301.4.
2000 2200 1 200 2.95 590.000
2400 2500 1 100 3.05 305.000
895.000 Sqm 13 11635

Page 12 of 86
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
Deduction for Issue the material (Oversize metal) for
scarifiying of Existing WBM (35%) 895 0.1 89.500
-31.325 Cum 200 -6265

4 3.2 Loosening, Levelling and Compacting original ground


supporting embankment to facilitate placement of first
layer of embankment,scarified to a depth of 150 mm
mixed with water at OMC and then compacted by
rolling so as to achieve minimum dry density as given
in Tables 300.1 and 300.2 for embankment construction
as per Technical Specification Clause 301.4.1.
Avg. Avg.
2000 2200 200 5.0 0.15 150.00
2400 2500 100 5.0 0.15 75.00
Total 225.000 Cum 15 3375

5 3.4(ii) Construction of embankment with approved material


obtained from borrow pits, transporting to site,
spreading, grading to required slope and compacting to
meet requirement of Tables 300.1 and 300.2 (Beyond
250m)with all leads as per Technical Specification
Clause 301.5(Having CBR more than 5)

Selected Soil 1st Layer (7.78+8.38)/2


2000 2200 1 200 8.080 0.150 242.40
Village Portion 2200 2400 1 200 5.000 0.150 150.00
2400 2500 1 100 8.080 0.150 121.20
Selected Soil 2nd Layer (7.78+7.18)/2
0 2000 1 2000 7.480 0.150 2244.00
2000 2200 1 200 7.480 0.150 224.40
2400 2500 1 100 7.480 0.150 112.20
Deduct existing Culvert Portion (RD 250, 1700, 1900m) -3 60 7.780 0.300 -420.12
2674.08 Cum 129 344956

Page 13 of 86
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
6 7.1( I Earthwork in excavation for structures as per Drawing
) and Technical Specifications Clause 305.1 including
(i) setting out, construction of shoring and bracing,
removal of stumps and other deleterious material and
disposal up to a lead of 50m dressing of sides and
bottom and backfilling in trenches with excavated
suitable material ordinary soil up to 3m depth.

At Chainage 580m (1x600mm dia HPC)


Face wall 2 3.30 1.4 1.05 9.702
Pipe Portion 1 4.9 1.05 0.75 3.859
At Chainage 980m (1x600mm dia HPC)
Face wall 2 3.30 1.4 1.05 9.702
Pipe Portion 1 4.9 1.05 0.75 3.859
At Chainage 1225m (1x600mm dia HPC)
Face wall 2 3.30 1.4 1.05 9.702
Pipe Portion 1 4.9 1.05 0.75 3.859
At Chainage 1390m (1x600mm dia HPC)
Face wall 2 3.30 1.4 1.05 9.702
Pipe Portion 1 4.9 1.05 0.75 3.859
54.243 Cum 160 8679

7 7.10 Providing concrete for plain/reinforced concrete in open


(ii) foundation complete as per drawings and technical
specifications Clause 802, 803, 1202 & 1203P.C.C
grade M 15(Nominal mix (1:2.5:5)
At Chainage 580m (1x600mm dia HPC)
Face wall PCC 2 3.30 1.4 0.15 1.386
Joint in Pipe Portion 2 1.05 0.6 0.15 0.189
At Chainage 980m (1x600mm dia HPC)
Face wall PCC 2 3.30 1.4 0.15 1.386
Joint in Pipe Portion 2 1.05 0.6 0.15 0.189
At Chainage 1225m (1x600mm dia HPC)
Face wall PCC 2 3.30 1.4 0.15 1.386
Joint in Pipe Portion 2 1.05 0.6 0.15 0.189
At Chainage 1390m (1x600mm dia HPC)

Page 14 of 86
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
Face wall PCC 2 3.30 1.4 0.15 1.386
Joint in Pipe Portion 2 1.05 0.6 0.15 0.189
6.300 Cum 3247 20456

8 7.18 Plain/reinforced cement concrete in substructure


(i) complete as per Drawings and Technical Specification
Clauses 802,804, 805, 806, 807, 1202 and 1204
P.C.C. grade M 15 nominal mix 1:2.5:5.

Up to GL
At Chainage 580m (1x600mm dia HPC)
Face Wall 2 3 1.1 0.6 3.960
At Chainage 980m (1x600mm dia HPC)
Face Wall 2 3 1.1 0.6 3.960
At Chainage 1225m (1x600mm dia HPC)
Face Wall 2 3 1.1 0.6 3.960
At Chainage 1390m (1x600mm dia HPC)
Face Wall 2 3 1.1 0.6 3.960
Above GL
At Chainage 580m (1x600mm dia HPC)
Face Wall 2 3 0.7 1.78 7.476
Deduct Pipe Portion -2 0.875 0.785 0.563 -0.773
In Coller Portion 2 1.05 0.300 0.900 0.567
Deduct Pipe Portion -2 0.3 0.785 0.563 -0.265
At Chainage 980m (1x600mm dia HPC)
Face Wall 2 3 0.7 1.8 7.560
Deduct Pipe Portion -2 0.875 0.785 0.563 -0.773
In Coller Portion 2 1.05 0.300 0.900 0.567
Deduct Pipe Portion -2 0.3 0.785 0.563 -0.265
At Chainage 1225m (1x600mm dia HPC)
Face Wall 2 3 0.7 1.75 7.350
Deduct Pipe Portion -2 0.875 0.785 0.563 -0.773
In Coller Portion 2 1.05 0.300 0.900 0.567
Deduct Pipe Portion -2 0.3 0.785 0.563 -0.265
At Chainage 1390m (1x600mm dia HPC)

Page 15 of 86
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
Face Wall 2 3 0.7 1.75 7.350
Deduct Pipe Portion -2 0.875 0.785 0.563 -0.773
In Coller Portion 2 1.05 0.300 0.900 0.567
Deduct Pipe Portion -2 0.3 0.785 0.563 -0.265
43.693 Cum. 3434 150043
9 7.6 Providing & laying I. S. marked or D.G.S. & D.
( C ) Inspected RCC pipes of NP 3 standard (IS-458-1971)
for culverts I/c loading, un loading, carting, all handling,
filling the joints in cement mortar 1:2 etc. complete as
per Drawing & Specification.
600 mm dia HPC
At Chainage 580m (1x600mm dia HPC) 1 7.5 7.500
At Chainage 980m (1x600mm dia HPC) 1 7.5 7.500
At Chainage 1225m (1x600mm dia HPC) 1 7.5 7.500
At Chainage 1390m (1x600mm dia HPC) 1 7.5 7.500
Total 30.000 Rmt 2206 66180

10 7.23 Backfilling behind abutment, wing wall and return wall


(ii) complete as per drawings and technical specification
Clause 1204.3.8. Granular materials.
At Chainage 580m (1x600mm dia HPC)
upto G.L.
Inner Portion 2 0.2 1.05 0.6 0.252
Pipe Bottom level to Pipe top level 1 5.75 1.05 0.75 4.528
Deduct Pipe -1 5.75 0.785 0.5625 -2.539
Above GL
Above Pipe top level to road level 1 6.25 1.05 0.735 4.823
Beside Head Wall 2 2.25 0.45 2.085 4.222
At Chainage 980m (1x600mm dia HPC)
upto G.L.
Inner Portion 2 0.2 1.05 0.6 0.252
Pipe Bottom level to Pipe top level 1 5.75 1.05 0.75 4.528
Deduct Pipe -1 5.75 0.785 0.5625 -2.539
Above GL
Above Pipe top level to road level 1 6.25 1.05 0.755 4.955

Page 16 of 86
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
Beside Head Wall 2 2.25 0.45 2.055 4.161
At Chainage 1225m (1x600mm dia HPC)
upto G.L.
Inner Portion 2 0.2 1.05 0.6 0.252
Pipe Bottom level to Pipe top level 1 5.75 1.05 0.75 4.528
Deduct Pipe -1 5.75 0.785 0.5625 -2.539
Above GL
Above Pipe top level to road level 1 6.25 1.05 0.705 4.627
Beside Head Wall 2 2.25 0.45 2.055 4.161
At Chainage 1390m (1x600mm dia HPC)
upto G.L.
Inner Portion 2 0.2 1.05 0.6 0.252
Pipe Bottom level to Pipe top level 1 5.75 1.05 0.75 4.528
Deduct Pipe -1 5.75 0.785 0.5625 -2.539
Above GL
Above Pipe top level to road level 1 6.25 1.05 0.705 4.627
Beside Head Wall 2 2.25 0.45 2.055 4.161
Total 44.702 Cum 569 25435

Gross Amount 628005


Above SOR 23.13% (+) 145257
Net Amount 773262

Page 17 of 86
82214

Page 18 of 86
58213

Page 19 of 86
10328

Page 20 of 86
2nd Running Bill
NAME OF ROAD :-Peti to Ghumrra
LENGTH OF ROAD:- 3.210 K.M.
Package No. - CG 15-118

s.N SOR Ref. MB Up to Date Since Previous Since Last


Particurs of item Unit Rate Remark
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12 13
1 2.1 Setting Out
Setting Out work complete with construction of
bench mark (Min 1 per km) working benchmark
(Min 4 per km) and near all bridges and cross-
drainage works made of bricks/stone masonary or
concrete and reference pillars made of precast
concrete poles/concrete filled 100 mm dia A.C.pipe
@ 100 m interval of as required on both sides of
the formation width, marking on central line, setting
out curves and recording of central line levels and
other required levels and distances etc. including
setting out of cross-drainage structures & bridges
with required reference pillars and marking etc. as
directed by Engineer-in-Charge.

Km 12300.00 2.000 24600 2.000 24600 0.000 0


2 2.3(A) Clearing and grubbing road land including uprooting wild
vegetation, grass,bushes, shrubs,saplings and trees of
girth up to 300mm, removal of stumps of such trees cut
earlier and disposal of unserviceable materials and
stacking of serviceable material to be used or auctioned
up to a lead of 1000 m including removal and disposal of
top organic soil not exceeding 150mm in thickness as
per Technical Specification Clause 201. By Mechanical
mans in area of non thormy jungle.

Sqm 2.60 10350.000 26910 9000.000 23400 1350.000 3510


4 3.1 Scarifying existing granular/bituminous surface upto a
depth of 100 mm and disposal of scarified material with a
lift upto 3 m and lead upto 1000 m as per Technical
Specification Clause 301.4. Sqm 13.00 4852.500 63083 3957.500 51448 895.000 11635 3818.988 863.675
Deduction for Issue the material (Oversize metal) for
scarifiying of Existing WBM (35%) Cum -200.00 169.838 -33968 138.513 -27703 31.326 -6265
5 3.2 Loosening, Levelling and Compacting original ground
supporting embankment to facilitate placement of first
layer of embankment,scarified to a depth of 150 mm
mixed with water at OMC and then compacted by rolling
so as to achieve minimum dry density as given in Tables
300.1 and 300.2 for embankment construction as per
Technical Specification Clause 301.4.1.

Cum 15.00 1687.500 25313 1462.500 21938 225.000 3375

21
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate Remark
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12 13
6 7.1( I) Earthwork in excavation for structures as per
(i) Drawing and Technical Specifications Clause 305.1
including setting out, construction of shoring and
bracing, removal of stumps and other deleterious
material and disposal up to a lead of 50m dressing
of sides and bottom and backfilling in trenches with
excavated suitable material ordinary soil up to 3m
depth.
Cum 160.00 131.116 20979 76.873 12300 54.243 8679
7 9.14 Providing and fixing of typical PMGSY informatory
(B) sign board with Logo as per MORD specifications
and drawing. Three MS Plates of 1.6 mm thick, top
and middle plate duly welded with MS flat iron
25mm x 5m size on back on edges. The lower
plate will be welded with MS angle iron frame of
25mm x 25mm x 5mm. The angle iron frame of the
lower most plate and flat iron frame of middle plate
will be welded to 2 nos. 75mm x 75 mm of 12 SWG
sheet tubes posts duly embedded in cement
concrete M-15 grade blocks of 450mm x 450mm x
600mm, 600mm below ground level. The top most
diamond plate will be welded to middle plate by
47mm x 47mm of 12 SWG steel plate tube. All
M.S. will be stove enameled on both sides.
Lettering and printing arrows, border etc. will be
painted with ready mixed synthetic enamel paint of
superior quality in required shade and colour. All
sections of framed posts and steel tube will be
painted with primer and two coats of epoxy paint
as per drawing Clause 1701 and Annexure 1700.1

Each 12102.00 1.000 12102 1.000 12102 0.000 0

22
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate Remark
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12 13
8 9.15( Providing and fixing of typical PMGSY Citizen
a) Board as per MORD specifications and drawing.
Three MS Plates of 1.6 mm thick, top and middle
plate duly welded with MS flat iron 25mm x 5m size
on back on edges. The top most diamond plate
will be welded to middle plate by 47mm x 47mm of
12 SWG steel plate tube. All M.S. will be stove
enameled on both sides. Lettering and printing
arrows, border etc. will be painted with ready mixed
synthetic enamel paint of superior quality in
required shade and colour. All sections of framed
posts and steel tube will be painted with primer and
two coats of epoxy paint as per drawing Clause
1701 and Annexure 1700.1

Each 12000.00 1.000 12000 1.000 12000 0.000 0


9 3.5(i) Excavation in cutting in soil with lead up to 50m
excavation for roadway in soil for carrying of cut earth to
embankment site with all lift and lead uo to 50m as per
technical specification clause 302.3 Cum 64.00 1010.875 64696 1010.875 64696 0.000 0
10 3.3(i) Construction of embankment with approved material
disposited at site from roadway cutting and excavation
from drain and foundation of other structures graded and
compacted to meet requirement of tables 300.1 and
300.2 as per Technical Specification Clause 301.5.
Cum 34.00 1010.875 34370 1010.875 34370 0.000 0
11 3.4(i) Construction of embankment with approved
material obtained form borrow pits, transported to
site, spreading, grading to required slopes and
compacting to meet requirement of Tables 300.1 &
300.2 with a lead up to 250 m as per technical
specifications clause 301.5
Cum 94.00 2060.863 193721 2060.863 193721 0.000 0
12 3.4(ii) Construction of embankment with approved material
obtained from pits construction of embakment with
approved material obtained from borrow pits with a lift up
to 1.5m, transporting to site, spreading, grading to
required slope and compacting to meet requirement of
tables 300.1 and 300.2 with a lead up to 1000m as per
Technical Specification Clause 301.5.

Cum 129 5025.780 648326 2351.700 303369 2674.080 344956


13 7.10 Providing concrete for plain/reinforced concrete in
(ii) open foundation complete as per drawings and
technical specifications Clause 802, 803, 1202 &
1203P.C.C grade M 15(Nominal mix (1:2.5:5)
Cum 3247.00 32.585 105805 26.285 85349 6.300 20456

23
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate Remark
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12 13
14 7.18 Plain/reinforced cement concrete in substructure
(i) complete as per Drawings and Technical
Specification Clauses 802,804, 805, 806, 807,
1202 and 1204
P.C.C. grade M 15 nominal mix 1:2.5:5. Cum 3434.00 68.786 236212 25.093 86169 43.693 150043
15 7.3(ii) Bedding for Pipe
Type B (First Class) Bedding
Laying (First Class) bedding on well compacted
sand, moorum or approved granular material as
per Clause 1105 (ii) Cum 558.00 0.838 467 0.838 467 0.000 0
16 7.6 Providing & laying I. S. marked or D.G.S. & D.
Inspected RCC pipes of NP 3 standard (IS-458-
1971) for culverts I/c loading, un loading, carting,
all handling, filling the joints in cement mortar 1:2
etc. complete as per Drawing & Specification.
600mm Dia Rmt 2206.00 30.000 66180 30.000 66180
17 7.6 Providing & laying I. S. marked or D.G.S. & D.
Inspected RCC pipes of NP 3 standard (IS-458-
1971) for culverts I/c loading, un loading, carting,
all handling, filling the joints in cement mortar 1:2
etc. complete as per Drawing & Specification.
1000mm Dia Rmt 4559.00 7.500 34193 7.500 34193 0.000 0
18 7.23 Backfilling behind abutment, wing wall and return
(i) wall complete as per drawings and technical
specification Clause 1204.3.8. Granuler materials.
Cum 569 55.192 31404 10.490 5969 44.702 25435
Total 1566391 938387 628005
Add Above SOR 23.13% (+) 362306 217049 145257
Grand Total 1928698 1155436 773262

24
3rd RA Bill .
Detail Measurement.
NAME OF ROAD :-Peti to Ghumarra
LENGTH OF ROAD:- 3.210 K.M.
Package No. - CG 15-118
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To

1 4.1(a Construction of Granular sub-base by providing well


)(iii) graded material, spreading in uniform layers with motor
grader on prepared surface, mixing by mix in place
method with rotavator at OMC, and compacting with
smooth wheel roller to achieve the desired density,
complete as per Technical Specification Clause 401.
disintegrated rock i.e. moorum.
For CC Road 2200 2350 1 150.00 4.050 0.150 91.125
Total 91.125 Cum 500 45563

2 6.4 Construction of un-reinforced, dowel jointed at expansion and


construction joint only, plain cement concrete pavement,
thickness as per design, over a prepared sub base, with 43
grade cement or any other type as per Clause 1501.2.2 M30
(Grade), coarse and fine aggregates conforming to IS:383,
maximum size of coarse aggregate not exceeding 25 mm,
mixed in a concrete mixer of not less than 0.2 cum capacity
and appropriate weigh batcher using approved mix design,
laid in approved fixed side formwork (steel channel, laying
and fixing of 125 micron thick polythene film, wedges, steel
plates including levelling the formwork as per drawing),
spreading the concrete with shovels, rakes, compacted using
needle, screed and plate vibrators and finished in continuous
operation including provision of contraction and expansion,
construction joints, applying debonding strips, primer, sealant,
dowel bars, near approaches to bridge/culvert and
construction joints, admixtures as approved, curing of
concrete slabs for 14-days,using curing compound (where
specified) and water finishing to lines and grade as per
drawing and Technical Specification Clause 1501

At Chainage 2200 2350 1 150.000 3.75 0.20 112.500 Cum 4470 502875
Wiheld 50% for Results of 28 days test. -251438
Gross Amount 297000
Above SOR 23.13% (+) 68696
Net Amount 365696

Page 25 of 86
3rd Running Bill
NAME OF ROAD :-Peti to Ghumrra
LENGTH OF ROAD:- 3.210 K.M.
Package No. - CG 15-118

s.N SOR Ref. MB Up to Date Since Previous Since Last


Particurs of item Unit Rate
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12
1 2.1 Setting Out
Setting Out work complete with construction of
bench mark (Min 1 per km) working benchmark
(Min 4 per km) and near all bridges and cross-
drainage works made of bricks/stone masonary or
concrete and reference pillars made of precast
concrete poles/concrete filled 100 mm dia A.C.pipe
@ 100 m interval of as required on both sides of
the formation width, marking on central line, setting
out curves and recording of central line levels and
other required levels and distances etc. including
setting out of cross-drainage structures & bridges
with required reference pillars and marking etc. as
directed by Engineer-in-Charge.

Km 12300.00 2.000 24600 2.000 24600 0.000 0


2 2.3(A) Clearing and grubbing road land including uprooting wild
vegetation, grass,bushes, shrubs,saplings and trees of
girth up to 300mm, removal of stumps of such trees cut
earlier and disposal of unserviceable materials and
stacking of serviceable material to be used or auctioned
up to a lead of 1000 m including removal and disposal of
top organic soil not exceeding 150mm in thickness as
per Technical Specification Clause 201. By Mechanical
mans in area of non thormy jungle.

Sqm 2.60 10350.000 26910 10350.000 26910 0.000 0


4 3.1 Scarifying existing granular/bituminous surface upto a
depth of 100 mm and disposal of scarified material with a
lift upto 3 m and lead upto 1000 m as per Technical
Specification Clause 301.4. Sqm 13.00 4852.500 63083 4852.500 63083 0.000 0
Deduction for Issue the material (Oversize metal) for
scarifiying of Existing WBM (35%) Cum -200.00 169.838 -33968 169.838 -33968 0.000 0

26
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12
5 3.2 Loosening, Levelling and Compacting original ground
supporting embankment to facilitate placement of first
layer of embankment,scarified to a depth of 150 mm
mixed with water at OMC and then compacted by rolling
so as to achieve minimum dry density as given in Tables
300.1 and 300.2 for embankment construction as per
Technical Specification Clause 301.4.1.

Cum 15.00 1687.500 25313 1687.500 25313 0.000 0


6 7.1( I) Earthwork in excavation for structures as per
(i) Drawing and Technical Specifications Clause 305.1
including setting out, construction of shoring and
bracing, removal of stumps and other deleterious
material and disposal up to a lead of 50m dressing
of sides and bottom and backfilling in trenches with
excavated suitable material ordinary soil up to 3m
depth.
Cum 160.00 131.116 20979 131.116 20979 0.000 0

27
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12
7 9.14 Providing and fixing of typical PMGSY informatory
(B) sign board with Logo as per MORD specifications
and drawing. Three MS Plates of 1.6 mm thick, top
and middle plate duly welded with MS flat iron
25mm x 5m size on back on edges. The lower
plate will be welded with MS angle iron frame of
25mm x 25mm x 5mm. The angle iron frame of the
lower most plate and flat iron frame of middle plate
will be welded to 2 nos. 75mm x 75 mm of 12 SWG
sheet tubes posts duly embedded in cement
concrete M-15 grade blocks of 450mm x 450mm x
600mm, 600mm below ground level. The top most
diamond plate will be welded to middle plate by
47mm x 47mm of 12 SWG steel plate tube. All
M.S. will be stove enameled on both sides.
Lettering and printing arrows, border etc. will be
painted with ready mixed synthetic enamel paint of
superior quality in required shade and colour. All
sections of framed posts and steel tube will be
painted with primer and two coats of epoxy paint
as per drawing Clause 1701 and Annexure 1700.1

Each 12102.00 1.000 12102 1.000 12102 0.000 0


8 9.15( Providing and fixing of typical PMGSY Citizen
a) Board as per MORD specifications and drawing.
Three MS Plates of 1.6 mm thick, top and middle
plate duly welded with MS flat iron 25mm x 5m size
on back on edges. The top most diamond plate
will be welded to middle plate by 47mm x 47mm of
12 SWG steel plate tube. All M.S. will be stove
enameled on both sides. Lettering and printing
arrows, border etc. will be painted with ready mixed
synthetic enamel paint of superior quality in
required shade and colour. All sections of framed
posts and steel tube will be painted with primer and
two coats of epoxy paint as per drawing Clause
1701 and Annexure 1700.1

Each 12000.00 1.000 12000 1.000 12000 0.000 0

28
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12
9 3.5(i) Excavation in cutting in soil with lead up to 50m
excavation for roadway in soil for carrying of cut earth to
embankment site with all lift and lead uo to 50m as per
technical specification clause 302.3 Cum 64.00 1010.875 64696 1010.875 64696 0.000 0
10 3.3(i) Construction of embankment with approved material
disposited at site from roadway cutting and excavation
from drain and foundation of other structures graded and
compacted to meet requirement of tables 300.1 and
300.2 as per Technical Specification Clause 301.5.

Cum 34.00 1010.875 34370 1010.875 34370 0.000 0


11 3.4(i) Construction of embankment with approved
material obtained form borrow pits, transported to
site, spreading, grading to required slopes and
compacting to meet requirement of Tables 300.1 &
300.2 with a lead up to 250 m as per technical
specifications clause 301.5
Cum 94.00 2060.863 193721 2060.863 193721 0.000 0
12 3.4(ii) Construction of embankment with approved material
obtained from pits construction of embakment with
approved material obtained from borrow pits with a lift up
to 1.5m, transporting to site, spreading, grading to
required slope and compacting to meet requirement of
tables 300.1 and 300.2 with a lead up to 1000m as per
Technical Specification Clause 301.5.

Cum 129 5025.780 648326 5025.780 648326 0.000 0


13 7.10 Providing concrete for plain/reinforced concrete in
(ii) open foundation complete as per drawings and
technical specifications Clause 802, 803, 1202 &
1203P.C.C grade M 15(Nominal mix (1:2.5:5)
Cum 3247.00 32.585 105805 32.585 105805 0.000 0
14 7.18 Plain/reinforced cement concrete in substructure
(i) complete as per Drawings and Technical
Specification Clauses 802,804, 805, 806, 807,
1202 and 1204
P.C.C. grade M 15 nominal mix 1:2.5:5. Cum 3434.00 68.786 236212 68.786 236212 0.000 0
15 7.3(ii) Bedding for Pipe
Type B (First Class) Bedding
Laying (First Class) bedding on well compacted
sand, moorum or approved granular material as
per Clause 1105 (ii) Cum 558.00 0.838 467 0.838 467 0.000 0

29
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12
16 7.6 Providing & laying I. S. marked or D.G.S. & D.
Inspected RCC pipes of NP 3 standard (IS-458-
1971) for culverts I/c loading, un loading, carting,
all handling, filling the joints in cement mortar 1:2
etc. complete as per Drawing & Specification.
600mm Dia Rmt 2206.00 30.000 66180 30.000 66180 0.000 0
17 7.6 Providing & laying I. S. marked or D.G.S. & D.
Inspected RCC pipes of NP 3 standard (IS-458-
1971) for culverts I/c loading, un loading, carting,
all handling, filling the joints in cement mortar 1:2
etc. complete as per Drawing & Specification.
1000mm Dia Rmt 4559.00 7.500 34193 7.500 34193 0.000 0
18 7.23 Backfilling behind abutment, wing wall and return
(i) wall complete as per drawings and technical
specification Clause 1204.3.8. Granuler materials.
Cum 569 55.192 31404 55.192 31404 0.000 0
19 6.4 Construction of un-reinforced, dowel jointed at
expansion and construction joint only, plain cement
concrete pavement, thickness as per design, over a
prepared sub base, with 43 grade cement or any other
type as per Clause 1501.2.2 M30 (Grade), coarse and
fine aggregates conforming to IS:383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a
concrete mixer of not less than 0.2 cum capacity and
appropriate weigh batcher using approved mix design,
laid in approved fixed side formwork (steel channel,
laying and fixing of 125 micron thick polythene film,
wedges, steel plates including levelling the formwork as
per drawing), spreading the concrete with shovels, rakes,
compacted using needle, screed and plate vibrators and
finished in continuous operation including provision of
contraction and expansion, construction joints, applying
debonding strips, primer, sealant, dowel bars, near
approaches to bridge/culvert and construction joints,
admixtures as approved, curing of concrete slabs for 14-
days,using curing compound (where specified) and water
finishing to lines and grade as per drawing and
Technical Specification Clause 1501

Cum 4470.00 112.500 502875 112.500 502875

30
s.N SOR Ref. MB Up to Date Since Previous Since Last
Particurs of item Unit Rate
o. NO. Pg.No.
Qty Amount Qty Amount Qty Amount
1 2 3 4 5 6 7 8 9 10 11 12
Wiheld 50% for Results of 28 days test. -251438 -251438
20 4.1(a) Construction of Granular sub-base by providing
(iii) well graded material, spreading in uniform layers
with motor grader on prepared surface, mixing by
mix in place method with rotavator at OMC, and
compacting with smooth wheel roller to achieve the
desired density, complete as per Technical
Specification Clause 401. disintegrated rock i.e.
moorum. Cum 500.00 91.125 45563 91.125 45563
Total 1863391 1566391 297000
Add Above SOR 23.13% (+) 431002 362306 68696
Grand Total 2294393 1928698 365695

31
Remark

13

4682.662 0.000

32
Remark

13

33
Remark

13

34
Remark

13

35
Remark

13

36
Remark

13

37
4th RA Bill .
Detail Measurement.
NAME OF ROAD :-Peti to Ghumarra
LENGTH OF ROAD:- 3.210 K.M.
Package No. - CG 15-118
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To

1 3.12 Construction of Subgrade and Earthern shoulders


(b) with approved material (granular material having CBR

more then 7%) with all lifts and leads, transporting to


site, spreading, grading to required slope and
compacted to meet requirement of table 300.2 as per
Technical Specification Clause 303.1.
Earthen Shoulder Besides G.S.B. (1.315+1.565)/2
0 500 2 500 1.440 0.125 180.00
500 1000 2 500 1.440 0.125 180.00
1000 1500 2 500 1.440 0.125 180.00
1500 2000 2 500 1.440 0.125 180.00
2000 2250 2 250 1.440 0.125 90.00
Deduct existing Culvert Portion (RD 250, 1700, 1900m) -3 60 1.440 0.125 -32.40
Total 777.600 Cum 143 111197

2 4.1(a Construction of Granular sub-base by providing well


)(iii) graded material, spreading in uniform layers with motor
grader on prepared surface, mixing by mix in place
method with rotavator at OMC, and compacting with
smooth wheel roller to achieve the desired density,
complete as per Technical Specification Clause 401.
disintegrated rock i.e. moorum.
0 500 1 500.00 4.050 0.125 253.125
500 1000 1 500.00 4.050 0.125 253.125
1000 1500 1 500.00 4.050 0.125 253.125
1500 2000 1 500.00 4.050 0.125 253.125
2000 2250 1 250.00 4.050 0.125 126.563
Deduct existing Culvert Portion (RD 250, 1700, 1900m) -3 60 4.050 0.125 -91.13
Total 1047.938 Cum 0
Withed 20 % for Profie correction (-) 209.588
838.350 Cum 500 419175

Page 38 of 86
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
3 7.1( I Earthwork in excavation for structures as per Drawing
) and Technical Specifications Clause 305.1 including
(i) setting out, construction of shoring and bracing,
removal of stumps and other deleterious material and
disposal up to a lead of 50m dressing of sides and
bottom and backfilling in trenches with excavated
suitable material ordinary soil up to 3m depth.

CC Drain from Ch 2250 to Ch 2362.


2250 2293 2 43.00 1.2 0.45 46.440
2293 2362 2 69.00 0.5 0.1 6.900
53.340 Cum 160 8534

4 7.10 Providing concrete for plain/reinforced concrete in open


(ii) foundations complete as per Drawings and Technical
Specifications Clause 802,803,1202 & 1203
P.C.C. grade M 10 nominal mix 1:3:6.

CC Drain from Ch 2250 to Ch 2362.


2250 2293 1 43 1.1 0.15 7.095
Total 7.095 Cum 3232 22931

5 7.18 Providing concrete for plain/reinforced concrete in open


(i) foundation complete as per drawings and technical
specifications Clause 802, 803, 1202 & 1203P.C.C
grade M 15(Nominal mix (1:2.5:5)
CC Drain from Ch 2250 to Ch 2362.
LHS 2250 2255 2 5.00 0.15 0.8 1.200
LHS 2255 2274 1 19.00 0.15 0.4 1.140
LHS 2255 2274 1 19.00 0.15 0.8 2.280
LHS 2274 2293 1 19.00 0.15 0.25 0.713
LHS 2274 2293 1 19.00 0.15 0.8 2.280
LHS 2293 2362 1 69.00 0.15 0.5 5.175
RHS 2293 2362 1 68.50 0.15 0.55 5.651
18.439 Cum 3434 63319

Gross Amount 625156


Above SOR 23.13% (+) 144599
Net Amount 769754

Page 39 of 86
5th RA Bill .
Detail Measurement.
NAME OF ROAD :-Peti to Ghumrra
Package No. - CG 15-118
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To

1 6.4 Construction of un-reinforced, dowel jointed at


expansion and construction joint only, plain cement
concrete pavement, thickness as per design, over a
prepared sub base, with 43 grade cement or any other
type as per Clause 1501.2.2 M30 (Grade), coarse and
fine aggregates conforming to IS:383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a
concrete mixer of not less than 0.2 cum capacity and
appropriate weigh batcher using approved mix design,
laid in approved fixed side formwork (steel channel,
laying and fixing of 125 micron thick polythene film,
wedges, steel plates including levelling the formwork as
per drawing), spreading the concrete with shovels,
rakes, compacted using needle, screed and plate
vibrators and finished in continuous operation including
provision of contraction and expansion, construction
joints, applying debonding strips, primer, sealant, dowel
bars, near approaches to bridge/culvert and
construction joints, admixtures as approved, curing of
concrete slabs for 14-days,using curing compound
(where specified) and water finishing to lines and grade
as per drawing and Technical Specification Clause
1501
Peti
At Chainage 2200 2350 1 150.000 3.75 0.20 112.500 Cum 4470 502875
Previous Paid Amount -251438

Total
Gross Amount 251438
Above SOR 23.13% (+) 58157
Net Amount 309595

Page 40 of 86
Bill Abstract
5th Running Bill
NAME OF ROAD :-Peti to Ghumrra
Package No. - CG 15-118
Ref. Up to Date Since Previous Since Last
S.N SOR
Particurs of item MB Unit Rate Remark
o. NO. Qty Amount Qty Amount Qty Amount
Pg.No.
1 2 3 4 5 6 7 8 9 10 11 12 13
1 2.1 Setting Out
Setting Out work complete with construction of bench mark (Min 1 per km)
working benchmark (Min 4 per km) and near all bridges and cross-drainage
works made of bricks/stone masonary or concrete and reference pillars
made of precast concrete poles/concrete filled 100 mm dia A.C.pipe @ 100
m interval of as required on both sides of the formation width, marking on
central line, setting out curves and recording of central line levels and other
required levels and distances etc. including setting out of cross-drainage
structures & bridges with required reference pillars and marking etc. as
directed by Engineer-in-Charge.

1. Peti to Ghumrra Km 12300.00 2.000 24600 2.000 24600 0.000 0


2 2.3(A) Clearing and grubbing road land including uprooting wild vegetation, grass,bushes,
shrubs,saplings and trees of girth up to 300mm, removal of stumps of such trees cut
earlier and disposal of unserviceable materials and stacking of serviceable material
to be used or auctioned up to a lead of 1000 m including removal and disposal of top
organic soil not exceeding 150mm in thickness as per Technical Specification Clause
201. By Mechanical mans in area of non thormy jungle.

1. Peti to Ghumrra Sqm 2.60 10350.000 26910 10350.000 26910 0.000 0


3 3.1 Scarifying existing granular/bituminous surface upto a depth of 100 mm and disposal
of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical
Specification Clause 301.4.
1. Peti to Ghumrra Sqm 13.00 4852.500 63083 4852.500 63083 0.000 0
Deduction for Issue the material (Oversize metal) for scarifiying of Existing WBM Cum -200.00 169.835 -33967 169.835 -33967 0.000 0
4 3.2 Loosening, Levelling and Compacting original ground supporting embankment to
facilitate placement of first layer of embankment,scarified to a depth of 150 mm
mixed with water at OMC and then compacted by rolling so as to achieve minimum
dry density as given in Tables 300.1 and 300.2 for embankment construction as per
Technical Specification Clause 301.4.1.

1. Peti to Ghumrra Cum 15.00 1687.500 25313 1687.500 25313 0.000 0


5 7.1( I) Earthwork in excavation for structures as per Drawing and Technical
(i) Specifications Clause 305.1 including setting out, construction of shoring
and bracing, removal of stumps and other deleterious material and disposal
up to a lead of 50m dressing of sides and bottom and backfilling in trenches
with excavated suitable material ordinary soil up to 3m depth.

1. Peti to Ghumrra Cum 160.00 184.456 29513 184.456 29513 0.000 0


Ref. Up to Date Since Previous Since Last
S.N SOR
Particurs of item MB Unit Rate Remark
o. NO. Qty Amount Qty Amount Qty Amount
Pg.No.
1 2 3 4 5 6 7 8 9 10 11 12 13
6 9.14 Providing and fixing of typical PMGSY informatory sign board with Logo as
(B) per MORD specifications and drawing. Three MS Plates of 1.6 mm thick,
top and middle plate duly welded with MS flat iron 25mm x 5m size on back
on edges. The lower plate will be welded with MS angle iron frame of
25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat
iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12
SWG sheet tubes posts duly embedded in cement concrete M-15 grade
blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top
most diamond plate will be welded to middle plate by 47mm x 47mm of 12
SWG steel plate tube. All M.S. will be stove enameled on both sides.
Lettering and printing arrows, border etc. will be painted with ready mixed
synthetic enamel paint of superior quality in required shade and colour. All
sections of framed posts and steel tube will be painted with primer and two
coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

1. Peti to Ghumrra Each 12102.00 1.000 12102 1.000 12102 0.000 0


7 9.15(a) Providing and fixing of typical PMGSY Citizen Board as per MORD
specifications and drawing. Three MS Plates of 1.6 mm thick, top and
middle plate duly welded with MS flat iron 25mm x 5m size on back on
edges. The top most diamond plate will be welded to middle plate by
47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled
on both sides. Lettering and printing arrows, border etc. will be painted with
ready mixed synthetic enamel paint of superior quality in required shade
and colour. All sections of framed posts and steel tube will be painted with
primer and two coats of epoxy paint as per drawing Clause 1701 and
Annexure 1700.1

1. Peti to Ghumrra Each 12000.00 1.000 12000 1.000 12000 0.000 0


8 3.5(i) Excavation in cutting in soil with lead up to 50m excavation for roadway in soil for
carrying of cut earth to embankment site with all lift and lead uo to 50m as per
technical specification clause 302.3
1. Peti to Ghumrra Cum 64.00 1010.875 64696 1010.875 64696 0.000 0
9 3.3(i) Construction of embankment with approved material disposited at site from roadway
cutting and excavation from drain and foundation of other structures graded and
compacted to meet requirement of tables 300.1 and 300.2 as per Technical
Specification Clause 301.5.

1. Peti to Ghumrra Cum 34.00 1010.875 34370 1010.875 34370 0.000 0


10 3.4(i) Construction of embankment with approved material obtained form borrow
pits, transported to site, spreading, grading to required slopes and
compacting to meet requirement of Tables 300.1 & 300.2 with a lead up to
250 m as per technical specifications clause 301.5
1. Peti to Ghumrra Cum 94.00 2060.863 193721 2060.863 193721 0.000 0
11 3.4(ii) Construction of embankment with approved material obtained from pits construction
of embakment with approved material obtained from borrow pits with a lift up to
1.5m, transporting to site, spreading, grading to required slope and compacting to
meet requirement of tables 300.1 and 300.2 with a lead up to 1000m as per
Technical Specification Clause 301.5.

1. Peti to Ghumrra Cum 129 5025.780 648326 5025.780 648326 0.000 0


Ref. Up to Date Since Previous Since Last
S.N SOR
Particurs of item MB Unit Rate Remark
o. NO. Qty Amount Qty Amount Qty Amount
Pg.No.
1 2 3 4 5 6 7 8 9 10 11 12 13
12 7.10 (ii) Providing concrete for plain/reinforced concrete in open foundation
complete as per drawings and technical specifications Clause 802, 803,
1202 & 1203P.C.C grade M 15(Nominal mix (1:2.5:5)
1. Peti to Ghumrra Cum 3232.00 7.095 22931 7.095 22931 0.000 0
13 7.10 (ii) Providing concrete for plain/reinforced concrete in open foundation
complete as per drawings and technical specifications Clause 802, 803,
1202 & 1203P.C.C grade M 15(Nominal mix (1:2.5:5)
1. Peti to Ghumrra Cum 3247.00 32.585 105803 32.585 105803 0.000 0
14 7.18 (i) Plain/reinforced cement concrete in substructure complete as per Drawings
and Technical Specification Clauses 802,804, 805, 806, 807, 1202 and
1204
P.C.C. grade M 15 nominal mix 1:2.5:5.
1. Peti to Ghumrra Cum 3434.00 87.225 299531 87.225 299531 0.000 0
15 7.3(ii) Bedding for Pipe
Type B (First Class) Bedding
Laying (First Class) bedding on well compacted sand, moorum or approved
granular material as per Clause 1105 (ii)
1. Peti to Ghumrra Cum 558.00 0.838 468 0.838 468 0.000 0
16 7.6 Providing & laying I. S. marked or D.G.S. & D. Inspected RCC pipes of NP
3 standard (IS-458-1971) for culverts I/c loading, un loading, carting, all
handling, filling the joints in cement mortar 1:2 etc. complete as per Drawing
& Specification. 1000mm Dia
1. Peti to Ghumrra Rmt 4559.00 7.500 34193 7.500 34193 0.000 0
17 7.23 Backfilling behind abutment, wing wall and return wall complete as per
(i) drawings and technical specification Clause 1204.3.8. Granuler materials.

1. Peti to Ghumrra Cum 569 55.192 31404 55.192 31404 0.000 0


18 7.6 Providing & laying I. S. marked or D.G.S. & D. Inspected RCC pipes of NP
(C) 3 standard (IS-458-1971) for culverts I/c loading, un loading, carting, all
handling, filling the joints in cement mortar 1:2 etc. complete as per Drawing
& Specification.
1. Peti to Ghumrra Rmt 2206 30.000 66180 30.000 66180 0.000 0
19 3.12 Construction of subgrade and earthen shoulders with approved material
(b) (Granular Material having CBR more than 7%) with all lifts and leads,
transporting to site, spreading, grading to required slope and compacted to
meet requirement of Table 300.2 as per Technical Specification Clause
303.1.
1. Peti to Ghumrra Cum 143 777.600 111197 777.600 111197 0.000 0
20 4.1(a) Construction of Granular sub-base by providing well graded material,
(iii) spreading in uniform layers with motor grader on prepared surface, mixing
by mix in place method with rotavator at OMC, and compacting with smooth
wheel roller to achieve the desired density, complete as per Technical
Specification Clause 401. disintegrated rock i.e. moorum.
1. Peti to Ghumrra Cum 500.00 929.475 464738 929.475 464738 0.000 0
Ref. Up to Date Since Previous Since Last
S.N SOR
Particurs of item MB Unit Rate Remark
o. NO. Qty Amount Qty Amount Qty Amount
Pg.No.
1 2 3 4 5 6 7 8 9 10 11 12 13
21 6.4 Construction of un-reinforced, dowel jointed at expansion and construction
joint only, plain cement concrete pavement, thickness as per design, over a
prepared sub base, with 43 grade cement or any other type as per Clause
1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383,
maximum size of coarse aggregate not exceeding 25 mm, mixed in a
concrete mixer of not less than 0.2 cum capacity and appropriate weigh
batcher using approved mix design, laid in approved fixed side formwork
(steel channel, laying and fixing of 125 micron thick polythene film, wedges,
steel plates including levelling the formwork as per drawing), spreading the
concrete with shovels, rakes, compacted using needle, screed and plate
vibrators and finished in continuous operation including provision of
contraction and expansion, construction joints, applying debonding strips,
primer, sealant, dowel bars, near approaches to bridge/culvert and
construction joints, admixtures as approved, curing of concrete slabs for 14-
days,using curing compound (where specified) and water finishing to lines
and grade as per drawing and Technical Specification Clause 1501
1. Peti to Ghumrra Cum 4470.00 112.500 502875 56.250 251438 56.250 251438
Total
2739984 2488547 251438
Add Above SOR 23.13% (+) 633758 575601 58157
Grand Total 3373743 3064148 309595

II- Certificate and Signatures

The measurments,on which the entries in column 1 to 10 are based, were made by Shri...................................................
...................................................................On ..........................................................................(Date)...........................are
recorded at page ..............................of Measurment Book No...............................................................

Dated Signature of Officer preparing Bill

Dated signature of Contractor/Supplier

Date Signature of Officer-in-Charge PIU


S.No. Item No. Page No. Date S.No. Item No. Page No. Date
1 2.1 4 28.02.13 1 7.1(I) 23 28.03.13
2 2.3A 4 28.02.13 2 7.10(II) 24 28.03.13
3 3.1 4 04.03.13 3 7.18(I) 25 31.03.13
4 3.2 7 13.03.13 4 7.23(II) 25 02.04.13
5 2.1 7 13.03.13 5 7.6(c ) 26 03.04.13
6 2.3A 7 13.03.13 6 7.18(I) 27 06.04.13
7 9.14 7 13.03.13 7 7.23(II) 29 08.04.13
8 9.15 8 13.03.13 8
9 3.5(i) 8 13.03.13 9
10 3.3(I) 8 14.03.13 10
11 7.1(I) 9 14.03.13 11
12 7.10(II) 9 15.03.13 12
13 7.3 10 17.03.13 13
14 7.6(c ) 10 18.03.13 14
15 7.18(I) 10 20.03.13 15
16 7.23(II) 11 20.03.13 16
17 3.4(I) 11 20.03.13 17
18 3.4(II) 11 23.03.13 18
12th RA Bill .
Detail Measurement.
NAME OF ROAD :-Peti to Ghumarra
LENGTH OF ROAD:- 3.210 K.M.
Package No. - CG 15-118
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To

1 7.1( I Earthwork in excavation for structures as per Drawing


) and Technical Specifications Clause 305.1 including
(i) setting out, construction of shoring and bracing,
removal of stumps and other deleterious material and
disposal up to a lead of 50m dressing of sides and
bottom and backfilling in trenches with excavated
suitable material ordinary soil up to 3m depth.

At Chainage 250m (8x1000mm VCW )


Return Wall 2 15.00 1 1.4 42.000
Return Wall 1 10.3 1 1.65 16.995
1 14.3 1 1.55 22.165
At Chainage 1700m (3x750mm VCW )
Return Wall 2 10 1 1.4 28.000
Return Wall 1 10 1 1.4 14.000
Return Wall 1 15 1 1.45 21.750
144.910 Cum 160 23186

2 7.10 Providing concrete for plain/reinforced concrete in open


(ii) foundation complete as per drawings and technical
specifications Clause 802, 803, 1202 & 1203P.C.C
grade M 15(Nominal mix (1:2.5:5)
At Chainage 250m (8x1000mm VCW )
Return Wall 2 15 0.95 0.2 5.700
Return Wall 1 14.3 0.95 0.2 2.717
Return Wall 1 10.3 0.95 0.2 1.957
CC portion PCC 1 12 5.35 0.1 6.420
At Chainage 1700m (3x450mm VCW )
Return Wall 1 10 1 0.2 2.000
Return Wall 1 10 1 0.2 2.000
Return Wall 1 15 1 0.2 3.000
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
23.794 Cum 3247 77259

3 7.18 Plain/reinforced cement concrete in substructure


(i) complete as per Drawings and Technical Specification
Clauses 802,804, 805, 806, 807, 1202 and 1204
P.C.C. grade M 15 nominal mix 1:2.5:5.

At Chainage 1700m (3x450mm VCW )


Return Wall 2 15.000 0.600 1.200 21.600
Return Wall 1 14.300 0.600 1.200 10.296
Return Wall 1 10.300 0.600 1.200 7.416
Shoulder 1 10.300 0.400 0.300 1.236
Shoulder 1 11.200 1.475 0.150 2.478
Shoulder 1 14.300 1.475 0.150 3.164
Shoulder 2 15.000 1.475 0.150 6.638
At Chainage 1700m (3x450mm VCW )
Return Wall 1 10.000 0.600 1.200 7.200
Return Wall 1 9.750 0.600 1.200 7.020
Return Wall 1 10.100 0.650 1.500 9.848
Return Wall 1 14.900 0.600 1.200 10.728
Shoulder 1 10.300 1.475 0.150 2.279
Shoulder 2 10.000 1.475 0.150 4.425
Shoulder 1 14.900 1.475 0.150 3.297
97.623 Cum. 3434 335239
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
4 6.4 Construction of un-reinforced, dowel jointed at
expansion and construction joint only, plain cement
concrete pavement, thickness as per design, over a
prepared sub base, with 43 grade cement or any other
type as per Clause 1501.2.2 M30 (Grade), coarse and
fine aggregates conforming to IS:383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a
concrete mixer of not less than 0.2 cum capacity and
appropriate weigh batcher using approved mix design,
laid in approved fixed side formwork (steel channel,
laying and fixing of 125 micron thick polythene film,
wedges, steel plates including levelling the formwork as
per drawing), spreading the concrete with shovels,
rakes, compacted using needle, screed and plate
vibrators and finished in continuous operation including
provision of contraction and expansion, construction
joints, applying debonding strips, primer, sealant, dowel
bars, near approaches to bridge/culvert and
construction joints, admixtures as approved, curing of
concrete slabs for 14-days,using curing compound
(where specified) and water finishing to lines and grade
as per drawing and Technical Specification Clause
1501
At Chainage 250m (13x1000mm dia VCW)
2 40.200 3.750 0.200 60.300
1 14.300 3.750 0.200 10.725
1 15.000 3.750 0.200 11.250

At Chainage 1700m (3x450mm VCW )


2 13.600 3.750 0.200 20.400
1 2.500 5.625 0.200 2.813
1 11.700 3.750 0.200 8.775
1 9.900 3.750 0.200 7.425
121.688
Total 60.844 Cum 4470 271972
5 7.23 Backfilling behind abutment, wing wall and return wall
(ii) complete as per drawings and technical specification
Clause 1204.3.8. Granular materials.
At Chainage 250m (13x1000mm dia VCW) (0.15+0.5)/2
Return Wall 3 15.000 0.325 1.000 14.625
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
Return Wall 1 10.400 0.325 1.000 3.380

At Chainage 1700m (3x450mm VCW ) 1 15.000 0.325 1.000 4.875


Return Wall 3 10.000 0.325 1.000 9.750
Return Wall 1 10.000 0.400 1.300 5.200
Total 37.830 Cum 569 21525

Gross Amount 729180


Above SOR 23.13% (+) 168659
Net Amount 897840
13th RA Bill .
Detail Measurement.
NAME OF ROAD :-Peti to Ghumarra
LENGTH OF ROAD:- 3.210 K.M.
Package No. - CG 15-118
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To

4 6.4 Construction of un-reinforced, dowel jointed at


expansion and construction joint only, plain cement
concrete pavement, thickness as per design, over a
prepared sub base, with 43 grade cement or any other
type as per Clause 1501.2.2 M30 (Grade), coarse and
fine aggregates conforming to IS:383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a
concrete mixer of not less than 0.2 cum capacity and
appropriate weigh batcher using approved mix design,
laid in approved fixed side formwork (steel channel,
laying and fixing of 125 micron thick polythene film,
wedges, steel plates including levelling the formwork as
per drawing), spreading the concrete with shovels,
rakes, compacted using needle, screed and plate
vibrators and finished in continuous operation including
provision of contraction and expansion, construction
joints, applying debonding strips, primer, sealant, dowel
bars, near approaches to bridge/culvert and
construction joints, admixtures as approved, curing of
concrete slabs for 14-days,using curing compound
(where specified) and water finishing to lines and grade
as per drawing and Technical Specification Clause
1501
Relese Qty 60.884
Total 60.884 Cum 4470 272151

Gross Amount 272151


Above SOR 23.13% (+) 62949
Net Amount 335100
14th RA Bill .
Detail Measurement.
NAME OF ROAD :-Peti to Ghumarra
LENGTH OF ROAD:- 3.210 K.M.
Package No. - CG 15-118
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate
No. From - To

1 7.18 Plain/reinforced cement concrete in substructure


(i) complete as per Drawings and Technical Specification
Clauses 802,804, 805, 806, 807, 1202 and 1204
P.C.C. grade M 15 nominal mix 1:2.5:5.

At Chainage 250m (13x1000mm VCW )


Shoulder 2 7.900 1.475 0.200 4.661
Shoulder 1 3.900 1.475 0.200 1.151
38 0.200 0.200 0.200 0.304
At Chainage 250m (3x750mm VCW )
20 0.200 0.200 0.200 0.160
6.276 Cum. 3434
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate
No. From - To
2 6.4 Construction of un-reinforced, dowel jointed at
expansion and construction joint only, plain cement
concrete pavement, thickness as per design, over a
prepared sub base, with 43 grade cement or any other
type as per Clause 1501.2.2 M30 (Grade), coarse and
fine aggregates conforming to IS:383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a
concrete mixer of not less than 0.2 cum capacity and
appropriate weigh batcher using approved mix design,
laid in approved fixed side formwork (steel channel,
laying and fixing of 125 micron thick polythene film,
wedges, steel plates including levelling the formwork as
per drawing), spreading the concrete with shovels,
rakes, compacted using needle, screed and plate
vibrators and finished in continuous operation including
provision of contraction and expansion, construction
joints, applying debonding strips, primer, sealant, dowel
bars, near approaches to bridge/culvert and
construction joints, admixtures as approved, curing of
concrete slabs for 14-days,using curing compound
(where specified) and water finishing to lines and grade
as per drawing and Technical Specification Clause
1501
At Chainage 250m (13x1000mm dia VCW)
1 7.900 3.750 0.200 5.925

Total 5.925 Cum 4470

Gross Amount
Above SOR 23.13% (+)
Net Amount
Amount

21550
Amount

1807503

26485

48035
11110
59145

1553669
1612815
15th RA Bill .
Detail Measurement.
NAME OF ROAD :-Peti to Ghumrra
Package No. - CG 15-118
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
1 2.3(A) Clearing and grubbing road land including uprooting
wild vegetation, grass,bushes, shrubs,saplings and
trees of girth up to 300mm, removal of stumps of such
trees cut earlier and disposal of unserviceable
materials and stacking of serviceable material to be
used or auctioned up to a lead of 1000 m including
removal and disposal of top organic soil not exceeding
150mm in thickness as per Technical Specification
Clause 201. By Mechanical mans in area of non
thormy jungle.
2500 2600 2 100 2.25 450.00
450.00 Sqm 2.6 1170
2 3.2 Loosening, Levelling and Compacting original ground
supporting embankment to facilitate placement of first
layer of embankment,scarified to a depth of 150 mm
mixed with water at OMC and then compacted by
rolling so as to achieve minimum dry density as given
in Tables 300.1 and 300.2 for embankment construction
as per Technical Specification Clause 301.4.1.
Avg. Avg.
2500 2600 2 100 2.5 0.15 75.00
Total 75.000 Cum 15 1125

3 3.4(ii) Construction of embankment with approved material


obtained from borrow pits, transporting to site,
spreading, grading to required slope and compacting to
meet requirement of Tables 300.1 and 300.2 (Beyond As per Calculation Sheet
250m)with all leads as per Technical Specification
Clause 301.5(Having CBR more than 5)

E/W 1st Layer


2505 2600 1 95 8.040 0.150 114.570
(7.78+7.18)/2
2505 2600 1 95 7.480 0.150 106.590
Total 221.160 Cum 129 28530
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
4 4.1(a Grainular subbase with well graded material (table
)(iii) 400.1):---- Construction of granular sub-base by
providing well graded material, spreading in
uniform layers with motor grader on prepared
surface, mixing by mix in place method with
rotavator at OMC, and compacting with vibratory
wheel roller to achieve the desired density,
complete as per Technical Specification Clause
401.
At Chainage 0 300 1 300 4.050 0.125 151.875
At Chainage 340 1726 1 1386 4.050 0.125 701.663
1741 1980 1 239 4.050 0.125 120.994
1995 2323 1 328 4.050 0.125 166.050
2323 2505 1 182 4.050 0.150 110.565
2505 2600 1 95 4.050 0.125 48.094
1299.240
Previous Paid -929.475
Total 369.765 Cum 500 184883

5 3.12 Construction of Subgrade and Earthern shoulders


(b) with approved material (granular material having CBR

more then 7%) with all lifts and leads, transporting to


site, spreading, grading to required slope and
compacted to meet requirement of table 300.2 as per
Technical Specification Clause 303.1.
Earthen Shoulder Besides G.S.B. (1.315+1.565)/2
At Chainage 0 300 2 300 1.440 0.125 108.000
340 1726 2 1386 1.440 0.125 498.960
1741 1980 2 239 1.440 0.125 86.040
1995 2323 2 328 1.440 0.125 118.080
2323 2505 2 182 1.440 0.150 78.624
2505 2600 2 95 1.440 0.125 34.200
923.904
Previous Paid -777.600
Total 146.304 Cum 143 20921
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
6 6.1 Construction of un-reinforced, dowel jointed at
expansion and construction joint only, plain cement
concrete pavement, thickness as per design, over a
prepared sub base, with 43 grade cement or any other
type as per Clause 1501.2.2 M30 (Grade), coarse and
fine aggregates conforming to IS:383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a
concrete mixer of not less than 0.2 cum capacity and
appropriate weigh batcher using approved mix design,
laid in approved fixed side formwork (steel channel,
laying and fixing of 125 micron thick polythene film,
wedges, steel plates including levelling the formwork as
per drawing), spreading the concrete with shovels,
rakes, compacted using needle, screed and plate
vibrators and finished in continuous operation including
provision of contraction and expansion, construction
joints, applying debonding strips, primer, sealant, dowel
bars, near approaches to bridge/culvert and
construction joints, admixtures as approved, curing of
concrete slabs for 14-days,using curing compound
(where specified) and water finishing to lines and grade
as per drawing and Technical Specification Clause
1501
At Chainage 2473 2505 1 32.000 3.75 0.20 24.000
2505 2596 1 91.000 3.75 0.20 68.250
Total 92.250 Cum 4470 412358
7 7.1( I Earthwork in excavation for structures as per Drawing
) and Technical Specifications Clause 305.1 including
(i) setting out, construction of shoring and bracing,
removal of stumps and other deleterious material and
disposal up to a lead of 50m dressing of sides and
bottom and backfilling in trenches with excavated
suitable material ordinary soil up to 3m depth.

CC Drain from
2460 2507 1 47.00 1 0.45 21.150
21.150 Cum 160 3384
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
8 7.18 Plain/reinforced cement concrete in substructure
(ii) complete as per Drawings and Technical Specification
Clauses 802,804, 805, 806, 807, 1202 and 1204
P.C.C. grade M 15 nominal mix 1:2.5:5.

CC Shoulder 2452.0 2458.0 1 6.000 1.100 0.150 0.990


(1.3+1.1)/2
2458.0 2463.7 1 5.700 1.200 0.150 1.026
(1.3+0.9)/2
2463.7 2468.7 1 6.000 1.100 0.150 0.990
(0.7+0.9)/2
2468.7 2480.7 1 12.000 0.800 0.150 1.440
1.4/2
2480.7 2488.7 1 8.000 0.700 0.150 0.840
5.286 Cum. 3434 18152
9 7.6 Providing & laying I. S. marked or D.G.S. & D.
( D ) Inspected RCC pipes of NP 3 standard (IS-458-1971)
for culverts I/c loading, un loading, carting, all handling,
filling the joints in cement mortar 1:2 etc. complete as
per Drawing & Specification.
300mm Dia
At Chainage 2 2.5 5.000
5.000 Rmt 843 4215
10 6.5 Construction of Plain Cement Concrete Drain with
P.C.C. grade M-15 including all shuttering/form work
etc. complete as per drawings/technical specification
and direction of engineer in charge.
CC Drain from
RHS 2386 2455 1 69.00 0.95 0.15 9.833
LHS 2385.6 2451.6 1 66.00 0.95 0.15 9.405
LHS 2451.6 2505 1 53.40 0.95 0.15 7.610
2460 2505 1 45.00 0.15 0.4 2.700
2451.6 2505 1 53.40 0.15 0.3 2.403
31.950 Cum 3442 109972
11 7.28 Supplying, fitting and placing HYSD bar reinforcement
in superstructure complete as per Drawing and
Technical Specification Clauses 1002, 1010 and 1202.
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
CC Drain Slab Steel
10mm dia main bar 3 20 0.72 0.617 26.654
8mm dia dst bar 3 5 3.92 0.395 23.226
10mm dia main bar 2 18 0.72 0.617 15.993
8mm dia dst bar 2 5 3.52 0.395 13.904
10mm dia main bar 1 15 0.72 0.671 7.247
8mm dia dst bar 1 5 2.82 0.395 5.570

92.593
0.0926 Mt 58242 5393

12 7.27 Providing and laying reinforced cement concrete in


(ii) superstructure as per Drawing and technical
specifications Clauses 800, 1205.4 and 1205.5, R.C.C.
M25.
3 4 0.8 0.1 0.960
2 3.6 0.8 0.1 0.576
1 2.9 0.8 0.1 0.232
1.768 Cum 4859 8591
13 7.23 Backfilling behind abutment, wing wall and return wall
(i) complete as per drawings and technical specification
Clause 1204.3.8. Granular materials.
CC Drain from
2460 2507 1 47 0.2 0.3 2.820
Total 2.820 Cum 569 1605
Gross Amount 800297
Above SOR 23.13% (+) 185109
Net Amount 985406
16th RA Bill .
Detail Measurement.
NAME OF ROAD :-Peti to Ghumrra
Package No. - CG 15-118
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To

2 3.12 Construction of subgrade/ Modified Soil with approved


(a)(i) material (Granular Material having CBR nt less than

10%) with all lifts and leads, transporting to site,


spreading, grading to required slope and compacted to
meet requirement of Table 300.2 as per Technical
Specification Clause 303.1. (7.58+7.18)/2
Modify Layer 0 300 1 300 7.380 0.1 221.400
340 800 1 460 7.380 0.1 339.480
800 1300 1 500 7.380 0.1 369.000
1300 1610 1 310 7.380 0.1 228.780
1623 2323 1 700 7.380 0.1 516.600
Total 1675.260 Cum 159 266366
6 6.1 Construction of un-reinforced, dowel jointed at
expansion and construction joint only, plain cement
concrete pavement, thickness as per design, over a
prepared sub base, with 43 grade cement or any other
type as per Clause 1501.2.2 M30 (Grade), coarse and
fine aggregates conforming to IS:383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a
concrete mixer of not less than 0.2 cum capacity and
appropriate weigh batcher using approved mix design,
laid in approved fixed side formwork (steel channel,
laying and fixing of 125 micron thick polythene film,
wedges, steel plates including levelling the formwork as
per drawing), spreading the concrete with shovels,
rakes, compacted using needle, screed and plate
vibrators and finished in continuous operation including
provision of contraction and expansion, construction
joints, applying debonding strips, primer, sealant, dowel
bars, near approaches to bridge/culvert and
construction joints, admixtures as approved, curing of
concrete slabs for 14-days,using curing compound
(where specified) and water finishing to lines and grade
as per drawing and Technical Specification Clause
1501
At Chainage 480m 1X1000mm Dia HPC
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
1 6.700 1.50 0.20 2.010
Total 2.010 Cum 4470 8985
7 7.1 Earthwork in excavation for structures as per Drawing
(I) and Technical Specifications Clause 305.1 including
(i) setting out, construction of shoring and bracing,
removal of stumps and other deleterious material and
disposal up to a lead of 50m dressing of sides and
bottom and backfilling in trenches with excavated
suitable material ordinary soil up to 3m depth.

At Chanige 480M 1X1000mm Dia HPC


Face wall 2 6.35 1.6 2.15 43.688
Pipe portion 1 4.90 1.7 1.55 12.912
At Chanige 400M 1X1000mm Dia HPC
1 14.60 1.85 3.7 99.937
1 11.50 1.85 3.7 78.718
1 5.20 1.7 2.75 24.310
259.564 Cum 160 41530
7.10 Providing concrete for plain/reinforced
(ii) concrete in open foundation complete as per
drawings and technical specifications Clause
802, 803, 1202 & 1203 P.C.C
grade M 15(Nominal mix (1:2.5:5)
At Chanige 480M 1X1000mm Dia HPC
Base 2 6.35 1.5 0.15 2.858
Pipe Portion 1 5.5 1.7 0.2 1.870
Upto G.L (1.4+1.0)/2
Face wall 2 6.15 1.150 1.2 16.974
At Chanige 400M 1X1000mm Dia HPC
Base 1 14.6 1.850 0.15 4.052
Base 1 11.5 1.850 0.15 3.191
Pipe Portion 1 5.2 1.700 0.15 1.326
Upto G.L (1.65+1.25)/2
Face wall 1 14.4 1.450 1.2 25.056
1 11.3 1.450 1.2 19.662
74.988 Cum 3247 243487
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
8 7.18 Plain/reinforced cement concrete in substructure
(ii) complete as per Drawings and Technical Specification
Clauses 802,804, 805, 806, 807, 1202 and 1204
P.C.C. grade M 15 nominal mix 1:2.5:5.

At Chanige 480M 1X1000mm Dia HPC (1.0+0.6)/2


Face wall 2 6.150 0.8 1.230 12.103

Pipe incasing 1 5.900 1.500 1.550 13.718


Pipe Dedact -1 7.500 0.785 1.513 -8.907
(0.6+0.4)/2
Face wall 2 6.150 0.500 0.500 3.075
4 0.400 0.400 0.400 0.256
20.245 Cum. 3434 69520
9 7.6 Providing & laying I. S. marked or D.G.S. & D.
( D ) Inspected RCC pipes of NP 3 standard (IS-458-1971)
for culverts I/c loading, un loading, carting, all handling,
filling the joints in cement mortar 1:2 etc. complete as
per Drawing & Specification.
At Chanige 480M 1X1000mm Dia HPC
At Chainage 3 2.5 7.500
7.500 Rmt 4559 34193
13 7.23 Backfilling behind abutment, wing wall and return wall
(i) complete as per drawings and technical specification
Clause 1204.3.8. Granular materials.
At Chanige 480M 1X1000mm Dia HPC
upto G.L.
2 6.35 0.1 1.2 1.524
2 6.35 0.3 1.2 4.572
Above G.L
4 2.425 0.7 1.5 10.185
2 4.9 0.1 1.55 1.519
At Chanige 400M 1X1000mm Dia HPC
upto G.L.
1 14.6 0.1 1.2 1.752
1 11.5 0.1 1.2 1.380
1 14.6 0.3 1.2 5.256
1 11.5 0.3 1.2 4.140
Total 30.328 Cum 569 17257
Gross Amount 681337
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M) B(M) D(M) QTY. UNIT Rate Amount
No. From - To
Above SOR 23.13% (+) 157593
Net Amount 838930
681337
15th RA Bill .
Detail Measurement.
NAME OF ROAD :-Peti to Ghumrra
LENGTH OF ROAD:- 3.875 K.M.
Package No. - CG 15-118
SOR Chainage
S.N. DISCRIPTION OF ITEMS Nos. L(M)
No. From - To
Setting Out
Setting Out work complete with construction of bench
mark (Min 1 per km) working benchmark (Min 4 per km)
and near all bridges and cross-drainage works made of
bricks/stone masonary or concrete and reference pillars
made of precast concrete poles/concrete filled 100 mm
dia A.C.pipe @ 100 m interval of as required on both
1 2.1 sides of the formation width, marking on central line,
setting out curves and recording of central line levels
and other required levels and distances etc. including
setting out of cross-drainage structures & bridges with
required reference pillars and marking etc. as directed
by Engineer-in-Charge.

0 2550 2550
0 0

Clearing and grubbing road land including uprooting


wild vegetation, grass,bushes, shrubs,saplings and
trees of girth up to 300mm, removal of stumps of such
trees cut earlier and disposal of unserviceable
materials and stacking of serviceable material to be
2 2.3(A) used or auctioned up to a lead of 1000 m including
removal and disposal of top organic soil not exceeding
150mm in thickness as per Technical Specification
Clause 201. By Mechanical mans in area of non
thormy jungle.
0 300 2 300
340 1500 2 1160
1500 2250 2 750
2400 2500 2 100

Scarifying existing granular/bituminous surface upto a


depth of 100 mm and disposal of scarified material with
3 3.1
a lift upto 3 m and lead upto 1000 m as per Technical
Specification Clause 301.4.
0 300 300
340 1000 660
1000 1500 500
1500 2000 500
2000 2500 500
Loosening, Levelling and Compacting original ground
supporting embankment to facilitate placement of first
layer of embankment,scarified to a depth of 150 mm
4 3.2 mixed with water at OMC and then compacted by
rolling so as to achieve minimum dry density as given
in Tables 300.1 and 300.2 for embankment construction
as per Technical Specification Clause 301.4.1.

0 300 2 300
340 2000 2 1660
2000 2500 2 500

Providing and fixing of typical PMGSY informatory sign


board with Logo as per MORD specifications and
drawing. Three MS Plates of 1.6 mm thick, top and
middle plate duly welded with MS flat iron 25mm x 5m
size on back on edges. The lower plate will be welded
with MS angle iron frame of 25mm x 25mm x 5mm. The
angle iron frame of the lower most plate and flat iron
frame of middle plate will be welded to 2 nos. 75mm x
75 mm of 12 SWG sheet tubes posts duly embedded in
cement concrete M-15 grade blocks of 450mm x
9.14 450mm x 600mm, 600mm below ground level. The top
5
(B) most diamond plate will be welded to middle plate by
47mm x 47mm of 12 SWG steel plate tube. All M.S.
will be stove enameled on both sides. Lettering and
printing arrows, border etc. will be painted with ready
mixed synthetic enamel paint of superior quality in
required shade and colour. All sections of framed posts
and steel tube will be painted with primer and two coats
of epoxy paint as per drawing Clause 1701 and
Annexure 1700.1

Providing and fixing of typical PMGSY Citizen Board as


per MORD specifications and drawing. Three MS
Plates of 1.6 mm thick, top and middle plate duly
welded with MS flat iron 25mm x 5m size on back on
edges. The top most diamond plate will be welded to
middle plate by 47mm x 47mm of 12 SWG steel plate
tube. All M.S. will be stove enameled on both sides.
9.15( Lettering and printing arrows, border etc. will be painted
6
a) with ready mixed synthetic enamel paint of superior
quality in required shade and colour. All sections of
framed posts and steel tube will be painted with primer
and two coats of epoxy paint as per drawing Clause
1701 and Annexure 1700.1

Excavation in cutting in soil with lead up to 50m


excavation for roadway in soil for carrying of cut earth
3 3.5(i)
to embankment site with all lift and lead uo to 50m as
per technical specification clause 302.3
Main Road To Gadaghat
At Chainage 510m approach CC road As Per Volume Sheet
Construction of embankment with approved material
disposited at site from roadway cutting and excavation
8 3.3(i) from drain and foundation of other structures graded As per Calculation Sheet
and compacted to meet requirement of tables 300.1
and 300.2 as per Technical Specification Clause 301.5.

Construction of embankment with approved material


obtained from pits construction of embakment with
approved material obtained from borrow pits with a lift
9 3.4(ii) up to 1.5m, transporting to site, spreading, grading to As per Calculation Sheet
required slope and compacting to meet requirement of
tables 300.1 and 300.2 with a lead up to 1000m as per
Technical Specification Clause 301.5.

Construction of embankment with approved material


obtained from pits construction of embakment with
approved material obtained from borrow pits with a lift
10 3.4(ii) up to 1.5m, transporting to site, spreading, grading to As per Calculation Sheet
required slope and compacting to meet requirement of
tables 300.1 and 300.2 with a lead up to 1000m as per
Technical Specification Clause 301.5.

E/W 1st Layer 0 300 1 300


340 1000 1 660
1000 2000 1 1000
2000 2250 1 250
2400 2500 1 100

0 300 1 300
340 1000 1 660
1000 2000 1 1000
2000 2250 1 250
2400 2500 1 100

Construction of subgrade/ Modified Soil with approved


material (Granular Material having CBR nt less than
3.12 10%) with all lifts and leads, transporting to site,
2
(a)(i) spreading, grading to required slope and compacted to
meet requirement of Table 300.2 as per Technical
Specification Clause 303.1.

At Chainage 0 300 2 300


At Chainage 340 1600 2 1260
1638 1950 2 312
1965 2250 2 285
2400 2500 2 100
Construction of Granular sub-base by providing well
graded material, spreading in uniform layers with motor
grader on prepared surface, mixing by mix in place
4.1(a
1 method with rotavator at OMC, and compacting with
)(iii)
smooth wheel roller to achieve the desired density,
complete as per Technical Specification Clause 401.
disintegrated rock i.e. moorum.
At Chainage 0 300 1 300
At Chainage 340 1610 1 1270
Main Road To Gadaghat 1626 1950 1 324
1965 2250 1 285
2250 2400 1 150
2400 2500 1 100

Construction of Subgrade and Earthern shoulders


with approved material (granular material having CBR
3.12 more then 7%) with all lifts and leads, transporting to
2
(b) site, spreading, grading to required slope and
compacted to meet requirement of table 300.2 as per
Technical Specification Clause 303.1.
Earthen Shoulder Besides G.S.B.
At Chainage 0 300 2 300
340 1610 2 1270
1626 1950 2 324
1965 2250 2 285
2250 2400 2 150
2400 2500 2 100

Wet Mix Macadam


Providing, laying, spreading and compacting graded
stone aggregate to wet mix macadam specification
including premixing the material with water at OMC in
mechanical mixer (Pug Mill), carriage of mixed material
by tipper to site, laying in uniform layers in sub-
3 4.9 base/base course on a well prepared sub-base and
compacting with smooth wheel roller of 80 to 100kN
weight to achieve the desired density including lighting,
barricading and maintenance of diversion, etc as per
Tables 400.11 & 400.12 and Technical Specification
Clause 406.

At Chainage 0 300 1 300


591 1610 1 1019
1648 1950 1 302
1965 2250 1 285
0
Providing and applying primer coat with bitumen
emulsion (SS-1) on prepared surface of granular base
5.1 including cleaning of road surface and spraying primer
4 at the rate of 0.70-1.0 kg/sqm using mechanical means
(I)
as per Technical Specification Clause 502.

At Chainage 0 300 1 300


591 1600 1 1009
1640 1950 1 310
1965 2250 1 285

Providing and applying tack coat with Bitumen


emulsion (RS-1) using emulsion distributor at the rate
5.2 of 0.25 to 0.30 kg per sqm on the prepared granular
5
(iii) surfaces treated with primer & cleaned with Hydraulic
broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix


carpet of 20 mm thickness composed of 13.2 mm to 5.6
mm aggregates either using penetration grade bitumen
or emulsion to required line, grade and level to serve as
wearing course on a previously prepared base,
5.9 including mixing in a suitable plant, laying and rolling
6
(iv) with a three wheel 80-100 kN static roller capacity,
finished to required level and grades to be followed by
seal coat of either Type A or Type B or Type C as per
Technical Specification Clause 508. CRMB

5.12 Providing and laying seal coat sealing the voids in a


B bituminous surface laid to the specified levels, grade
7 and cross fall using Type A, Type B and Type C as per
Case
II (iv) Technical Specification Clause 510 CRMB
4 6.4 Construction of un-reinforced, dowel jointed at
expansion and construction joint only, plain cement
concrete pavement, thickness as per design, over a
prepared sub base, with 43 grade cement or any other
type as per Clause 1501.2.2 M30 (Grade), coarse and
fine aggregates conforming to IS:383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a
concrete mixer of not less than 0.2 cum capacity and
appropriate weigh batcher using approved mix design,
laid in approved fixed side formwork (steel channel,
laying and fixing of 125 micron thick polythene film,
wedges, steel plates including levelling the formwork as
per drawing), spreading the concrete with shovels,
rakes, compacted using needle, screed and plate
vibrators and finished in continuous operation including
provision of contraction and expansion, construction
joints, applying debonding strips, primer, sealant, dowel
bars, near approaches to bridge/culvert and
construction joints, admixtures as approved, curing of
concrete slabs for 14-days,using curing compound
(where specified) and water finishing to lines and grade
as per drawing and Technical Specification Clause
1501
At Chainage 2250 2400 1 182.000
2400 2500 1 95.000
At Chainage 250m (13x1000mm dia VCW)
2 40.200
1 14.300
1 23.900
1 212.000
At Chainage 1700m (3x450mm VCW )
2 13.600
1 2.500
1 11.700
1 9.900

Total
Earthwork in excavation for structures as per Drawing
and Technical Specifications Clause 305.1 including
setting out, construction of shoring and bracing,
7.1( I removal of stumps and other deleterious material and
1 ) disposal up to a lead of 50m dressing of sides and
(i) bottom and backfilling in trenches with excavated
suitable material ordinary soil up to 3m depth.

At Chainage 36m (1x1000mm dia HPC)


Return Wall 2 6.45
Pipe Portion 1 3.8
Inner Pipe 1 3.8
At Chainage 580m (1x600mm dia HPC)
Face wall 2 3.30
Pipe Portion 1 4.9
At Chainage 980m (1x600mm dia HPC)
Face wall 2 3.30
Pipe Portion 1 4.9
At Chainage 1225m (1x600mm dia HPC)
Face wall 2 3.30
Pipe Portion 1 4.9
At Chainage 1390m (1x600mm dia HPC)
Face wall 2 3.30
Pipe Portion 1 4.9
At Chainage 250m (8x1000mm VCW )
Return Wall 2 15.00
Return Wall 1 10.3
1 14.3
At Chainage 1700m (3x750mm VCW )
Return Wall 2 10
Return Wall 1 10
Return Wall 1 15
CC Drain from Ch 2250 to Ch 2362.
2250 2293 2 43.00
2293 2362 2 69.00
2 150.00

Plain/reinforced cement concrete in substructure


complete as per Drawings and Technical Specification
7.18 Clauses 802,804, 805, 806, 807, 1202 and 1204
2
(i) P.C.C. grade M 15 nominal mix 1:2.5:5.

At Chainage 36m (1x1000mm dia HPC)


Up to G.L.
Return Wall 2 6.45
Pipe Joint Portion 2 0.6

Up to Wall Bed Level 2 6.15


At Chainage 580m (1x600mm dia HPC)
Face wall PCC 2 3.30
Joint in Pipe Portion 2 1.05
At Chainage 980m (1x600mm dia HPC)
Face wall PCC 2 3.30
Joint in Pipe Portion 2 1.05
At Chainage 1225m (1x600mm dia HPC)
Face wall PCC 2 3.30
Joint in Pipe Portion 2 1.05
At Chainage 1390m (1x600mm dia HPC)
Face wall PCC 2 3.30
Joint in Pipe Portion 2 1.05
At Chainage 250m (8x1000mm VCW )
Return Wall 2 15
Return Wall 1 14.3
Return Wall 1 10.3
CC portion PCC 1 12
At Chainage 1700m (3x450mm VCW )
Return Wall 1 10
Return Wall 1 10
Return Wall 1 15
2 150
14 7.3(ii) Bedding for Pipe
Type B (First Class) Bedding
Laying (First Class) bedding on well compacted sand,
moorum or approved
At Chainage granular dia
36m (1x1000mm material
HPC)as per Clause (4.9+4.8)/2
1105 (ii)
Pipe Portion 1 4.85
Deduction -2 0.6

Plain/reinforced cement concrete in substructure


complete as per Drawings and Technical Specification
7.18 Clauses 802,804, 805, 806, 807, 1202 and 1204
3
(i) P.C.C. grade M 15 nominal mix 1:2.5:5.

At Chainage 36m (1x1000mm dia HPC)


Wall Bed Level to top Level 2 6.15
(1.3+0.9)/2
Deduct Pipe Portion -2 1.1
Up to GL
At Chainage 580m (1x600mm dia HPC)
Face Wall 2 3
At Chainage 980m (1x600mm dia HPC)
Face Wall 2 3
At Chainage 1225m (1x600mm dia HPC)
Face Wall 2 3
At Chainage 1390m (1x600mm dia HPC)
Face Wall 2 3
Above GL
At Chainage 580m (1x600mm dia HPC)
Face Wall 2 3
Deduct Pipe Portion -2 0.875
In Coller Portion 2 1.05
Deduct Pipe Portion -2 0.3
At Chainage 980m (1x600mm dia HPC)
Face Wall 2 3
Deduct Pipe Portion -2 0.875
In Coller Portion 2 1.05
Deduct Pipe Portion -2 0.3
At Chainage 1225m (1x600mm dia HPC)
Face Wall 2 3
Deduct Pipe Portion -2 0.875
In Coller Portion 2 1.05
Deduct Pipe Portion -2 0.3
At Chainage 1390m (1x600mm dia HPC)
Face Wall 2 3
Deduct Pipe Portion -2 0.875
In Coller Portion 2 1.05
Deduct Pipe Portion -2 0.3
At Chainage 1700m (3x450mm VCW )
Return Wall 2 15.000
Return Wall 1 14.300
Return Wall 1 10.300
Shoulder 1 10.300
Shoulder 1 11.200
Shoulder 1 14.300
Shoulder 2 15.000
At Chainage 1700m (3x450mm VCW )
Return Wall 1 10.000
Return Wall 1 9.750
Return Wall 1 10.100
Return Wall 1 14.900
Shoulder 1 10.300
Shoulder 2 10.000
Shoulder 1 14.900
At Chainage 250m (13x1000mm VCW )
Shoulder 2 7.900
Shoulder 1 3.900
38 0.200
2 150.000
2 212.000
At Chainage 250m (3x750mm VCW )
20 0.200

15 7.6 Providing & laying I. S. marked or D.G.S. & D.


( C ) Inspected RCC pipes of NP 3 standard (IS-458-1971)
for culverts I/c loading, un loading, carting, all handling,
filling the joints in cement mortar 1:2 etc. complete as
per Drawing & Specification.
1000 mm dia HPC
At Chainage 36m 1 7.5

9 7.6 Providing & laying I. S. marked or D.G.S. & D.


( C ) Inspected RCC pipes of NP 3 standard (IS-458-1971)
for culverts I/c loading, un loading, carting, all handling,
filling the joints in cement mortar 1:2 etc. complete as
per Drawing & Specification.
At Chainage 580m (1x600mm dia HPC) 1 7.5
At Chainage 980m (1x600mm dia HPC) 1 7.5
At Chainage 1225m (1x600mm dia HPC) 1 7.5
At Chainage 1390m (1x600mm dia HPC) 1 7.5

5 7.18 Providing concrete for plain/reinforced concrete in open


(i) foundation complete as per drawings and technical
specifications Clause 802, 803, 1202 & 1203P.C.C
grade M 15(Nominal mix (1:2.5:5)
CC Drain from Ch 2250 to Ch 2362.
2250 2293 1 43
CC Drain from Ch 2250 to Ch 2362.
LHS 2250 2255 2 5.00
LHS 2255 2274 1 19.00
LHS 2255 2274 1 19.00
LHS 2274 2293 1 19.00
LHS 2274 2293 1 19.00
LHS 2293 2362 1 69.00
RHS 2293 2362 1 68.50
10 7.23 Backfilling behind abutment, wing wall and return wall
(ii) complete as per drawings and technical specification
Clause 1204.3.8. Granular materials.
At Chainage 580m (1x600mm dia HPC)
upto G.L.
Inner Portion 2 0.2
Pipe Bottom level to Pipe top level 1 5.75
Deduct Pipe -1 5.75
Above GL
Above Pipe top level to road level 1 6.25
Beside Head Wall 2 2.25
At Chainage 980m (1x600mm dia HPC)
upto G.L.
Inner Portion 2 0.2
Pipe Bottom level to Pipe top level 1 5.75
Deduct Pipe -1 5.75
Above GL
Above Pipe top level to road level 1 6.25
Beside Head Wall 2 2.25
At Chainage 1225m (1x600mm dia HPC)
upto G.L.
Inner Portion 2 0.2
Pipe Bottom level to Pipe top level 1 5.75
Deduct Pipe -1 5.75
Above GL
Above Pipe top level to road level 1 6.25
Beside Head Wall 2 2.25
At Chainage 1390m (1x600mm dia HPC)
upto G.L.
Inner Portion 2 0.2
Pipe Bottom level to Pipe top level 1 5.75
Deduct Pipe -1 5.75
Above GL
Above Pipe top level to road level 1 6.25
Beside Head Wall 2 2.25
At Chainage 250m (13x1000mm dia VCW)
Return Wall 3 15.000
Return Wall 1 10.400

At Chainage 1700m (3x450mm VCW ) 1 15.000


Return Wall 3 10.000
Return Wall 1 10.000
Bill .
urement.

B(M) D(M) QTY. UNIT Rate Amount

2550.000
0.000
2.550 Km 12300 31365

2.25 1350.00
2.25 5220.00
2.25 3375.00
2.25 450.00
10395.00 Sqm 2.6 27027

2.95 885.000
2.89 1907.400
3.05 1525.000
2.95 1475.000
2.9 1450.000

4878.000 Sqm 13 63414


169.000 -200 -33800
Avg. Avg.
2.5 0.15 225.00
2.5 0.15 1245.00
2.5 0.15 375.00
Total 1845.000 Cum 15 27675

1.000 Each 12102 12102

1
1 Each 12000 12000

As Per Volume Sheet 1010.875


Total 1010.875 Cum 64 64696
1010.875
1010.875 Cum 34 34370

3071.738
-1010.875
Net 2060.863 Cum 94 193721

8.040 0.150 361.800


8.040 0.150 795.960
8.040 0.150 1206.000
8.040 0.150 301.500
8.040 0.150 120.600
(7.78+7.18)/2
7.480 0.150 336.600
7.480 0.150 740.520
7.480 0.150 1122.000
7.480 0.150 280.500
7.480 0.150 112.200

Total 5377.680 Cum 129 693721

(1.125+1.465)/2
1.295 0.170 132.090
1.295 0.170 554.778
1.295 0.170 137.374
1.295 0.200 147.630
1.295 0.170 44.030
Total 1015.902 Cum 159 161528
4.050 0.125 151.875
4.050 0.125 642.938
4.050 0.125 164.025
4.050 0.125 144.281
4.050 0.150 91.125
4.050 0.125 50.625
Total 1244.869 Cum 500 622434

(1.425+1.725)/2
1.440 0.125 108.000
1.440 0.125 457.200
1.440 0.125 116.640
1.440 0.125 102.600
1.440 0.125 54.000
1.440 0.125 36.000

Total 874.440 Cum 143 125045

3.750 0.150 168.750


3.750 0.150 573.188
3.750 0.150 169.875
3.750 0.150 160.313
3.750 0.150 0.000
1072.125 Cum 1022 1095712
3.750 1125.000
3.750 3783.750
3.750 1162.500
3.750 1068.750

7140.000 Sqm 39 278460 5355

7140.000 1927.8
7140.000 Sqm 13 92820

7140.000 15279.6
7140.000 Sqm 95 678300

7140.000
7140.000 Sqm 37 264180
3.75 0.20 136.500
3.75 0.20 71.250

3.750 0.200 60.300


3.750 0.200 10.725
3.750 0.200 17.925
3.750 0.200 159.000

3.750 0.200 20.400


5.625 0.200 2.813
3.750 0.200 8.775
3.750 0.200 7.425
495.113
495.113 Cum 4470 2213153

(3.4+1.5)/2
2 2.45 63.210
1.53 2.2 12.791
1.53 0.15 0.872

1.4 1.05 9.702


1.05 0.75 3.859

1.4 1.05 9.702


1.05 0.75 3.859
1.4 1.05 9.702
1.05 0.75 3.859

1.4 1.05 9.702


1.05 0.75 3.859

1 1.4 42.000
1 1.65 16.995
1 1.55 22.165

1 1.4 28.000
1 1.4 14.000
1 1.45 21.750

1.2 0.45 46.440


0.5 0.1 6.900
1 1.1 330.000
659.366 Cum 160 105499

2 0.15 3.870
1.53 0.15 0.275
(1.7+1.3)/2
1.5 1.2 22.140

1.4 0.15 1.386


0.6 0.15 0.189

1.4 0.15 1.386


0.6 0.15 0.189

1.4 0.15 1.386


0.6 0.15 0.189

1.4 0.15 1.386


0.6 0.15 0.189

0.95 0.2 5.700


0.95 0.2 2.717
0.95 0.2 1.957
5.35 0.1 6.420

1 0.2 2.000
1 0.2 2.000
1 0.2 3.000
1 0.2 60.000
116.379 Cum 3247 377884

1.53 0.15 1.113


1.53 0.15 -0.275
Total 0.838 Cum 558 467

(1.3+0.4)/2
0.85 2.65 27.706

0.785 1.513 -2.613

1.1 0.6 3.960

1.1 0.6 3.960

1.1 0.6 3.960

1.1 0.6 3.960

0.7 1.78 7.476


0.785 0.563 -0.773
0.300 0.900 0.567
0.785 0.563 -0.265

0.7 1.8 7.560


0.785 0.563 -0.773
0.300 0.900 0.567
0.785 0.563 -0.265

0.7 1.75 7.350


0.785 0.563 -0.773
0.300 0.900 0.567
0.785 0.563 -0.265

0.7 1.75 7.350


0.785 0.563 -0.773
0.300 0.900 0.567
0.785 0.563 -0.265

0.600 1.200 21.600


0.600 1.200 10.296
0.600 1.200 7.416
0.400 0.300 1.236
1.475 0.150 2.478
1.475 0.150 3.164
1.475 0.150 6.638

0.600 1.200 7.200


0.600 1.200 7.020
0.650 1.500 9.848
0.600 1.200 10.728
1.475 0.150 2.279
1.475 0.150 4.425
1.475 0.150 3.297
58213
1.475 0.200 4.661
1.475 0.200 1.151
0.200 0.200 0.304
0.800 2.400 576.000
1.475 0.150 93.810

0.200 0.200 0.160

842.495 Cum. 3434 2893128

7.500
Total 7.500 Rmt 4559 34193

7.500
7.500
7.500
7.500

Total 30.000 Rmt 2207 66210

1.1 0.15 7.095

0.15 0.8 1.200


0.15 0.4 1.140
0.15 0.8 2.280
0.15 0.25 0.713
0.15 0.8 2.280
0.15 0.5 5.175
0.15 0.55 5.651
25.534 Cum 3442 87887

1.05 0.6 0.252


1.05 0.75 4.528
0.785 0.5625 -2.539

1.05 0.735 4.823


0.45 2.085 4.222

1.05 0.6 0.252


1.05 0.75 4.528
0.785 0.5625 -2.539

1.05 0.755 4.955


0.45 2.055 4.161

1.05 0.6 0.252


1.05 0.75 4.528
0.785 0.5625 -2.539

1.05 0.705 4.627


0.45 2.055 4.161

1.05 0.6 0.252


1.05 0.75 4.528
0.785 0.5625 -2.539

1.05 0.705 4.627


0.45 2.055 4.161
(0.15+0.5)/2
0.325 1.000 14.625
0.325 1.000 3.380

0.325 1.000 4.875


0.325 1.000 9.750
0.400 1.300 5.200
Total 82.532 Cum 569 46961 10328
Gross Amount 10270152
Above SOR 23.13% (+) 2375486
Net Amount 12645638

You might also like