Professional Documents
Culture Documents
FM Stereo FM/AM Receiver: Str-Dk5
FM Stereo FM/AM Receiver: Str-Dk5
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB01COV_STR-DK5-
SP.fm]
GB01COV_STR-DK5-SP.book Page 1 Monday, February 20, 2006 6:34 PM
2-656-285-14(1)
FM Stereo
FM/AM Receiver
Operating Instructions
STR-DK5
©2006 Sony Corporation
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB02REG_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 2 Monday, February 20, 2006 6:34 PM
R L
R L
S
CENTER FRONT
2-XXX-XXX-XX AA
Area code
2GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB01COV_STR-DK5- masterpage:Right
SPTOC.fm]
GB01COV_STR-DK5-SP.book Page 3 Monday, February 20, 2006 6:34 PM
Table of Contents
3GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 4 Monday, February 20, 2006 6:34 PM
Getting Started
Connectable components
Component to be connected Page
DVD player
With digital audio outputa) 6
With analog audio output onlyb) 8
Satellite tuner
With analog audio output onlyb) 8
Super Audio CD/CD player
With digital audio outputa) 7
With analog audio output onlyb) 8
VCR 8
a) Model with a DIGITAL OPTICAL OUTPUT or DIGITAL COAXIAL OUTPUT jack, etc.
b) Model equipped only with AUDIO OUT L/R jacks, etc.
4GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 5 Monday, February 20, 2006 6:34 PM
Required cords
The hookup diagrams on the subsequent pages assume the use of the following optional connection
Getting Started
cords (A to C) (not supplied).
A Audio cord C Coaxial digital cord
White (L)
Red (R)
B Optical digital cord
Notes
• Turn off the power to all components before making any connections.
• Be sure to make connections firmly to avoid hum and noise.
• When connecting an audio cord, be sure to match the color-coded pins to the appropriate jacks on the components:
white (left, audio) to white; and red (right, audio) to red.
• When connecting optical digital cords, insert the cord plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
5GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 6 Monday, February 20, 2006 6:34 PM
DVD player
OUTPUT
AUDIO
OUT
OUTPUT L
DIGITAL
COAXIAL
C A
DIGITAL ANTENNA
OPTICAL
SA-CD/
CD
IN
AM
L
L L
AUDIO
OUT
R R
AUDIO IN AUDIO IN AUDIO IN AUDIO IN SUB
SA-CD/CD DVD VIDEO 2 VIDEO 1 WOOFER
6GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 7 Monday, February 20, 2006 6:34 PM
Getting Started
DIGITAL ANTENNA
OPTICAL
SA-CD/
CD
IN
AM
L
L L
AUDIO
OUT
R R
AUDIO IN AUDIO IN AUDIO IN AUDIO IN SUB
SA-CD/CD DVD VIDEO 2 VIDEO 1 WOOFER
B A
DIGITAL OUTPUT
OPTICAL LINE
OUT
L
Tip
All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz and 96 kHz sampling frequencies.
Note
The sound is not output when you play a Super Audio CD on the Super Audio CD player connected to the
SA-CD/CD OPTICAL IN jack on this receiver. Connect to the analog input jacks (SA-CD/CD IN jacks). Refer to
the operating instructions supplied with the Super Audio CD player.
7GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 8 Monday, February 20, 2006 6:34 PM
OUTPUT OUTPUT
AUDIO AUDIO
OUT OUT
L L
R R
A
A
DIGITAL ANTENNA
OPTICAL
SA-CD/
CD
IN
AM
L
L L
AUDIO
OUT
R R
AUDIO IN AUDIO IN AUDIO IN AUDIO IN SUB
SA-CD/CD DVD VIDEO 2 VIDEO 1 WOOFER
A A
OUTPUT OUTPUT
LINE AUDIO
OUT
L
L
R
R
8GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 9 Monday, February 20, 2006 6:34 PM
Getting Started
Connect the supplied AM loop antenna and FM wire antenna.
AM loop antenna
(supplied)
FM wire antenna
(supplied)
DIGITAL ANTENNA
OPTICAL
SA-CD/
CD
IN
AM
L
L L
AUDIO
OUT
R R
AUDIO IN AUDIO IN AUDIO IN AUDIO IN SUB
SA-CD/CD DVD VIDEO 2 VIDEO 1 WOOFER
9GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 10 Monday, February 20, 2006 6:34 PM
3: Connecting speakers
Connect your speakers to the receiver. This receiver allows you to use a 5.1 channel speaker system.
To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a
center speaker, and two surround speakers) and a sub woofer (5.1 channel).
Example of 5.1 channel speaker system configuration
Center speaker
Sub woofer
Tip
Since the sub woofer does not emit highly directional signals, you can place it wherever you want.
10GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 11 Monday, February 20, 2006 6:34 PM
Required cords
A Speaker cords (not supplied) B Monaural audio cord (not supplied)
Getting Started
(+) Black
(–)
E e E e E e
A A A
R L R L
AUDIO
OUT
SUB R L R L
WOOFER SURROUND CENTER FRONT
SPEAKERS
B A A
INPUT
E e E e
AUDIO
IN
11GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 12 Monday, February 20, 2006 6:34 PM
4: Connecting the AC
power cord
AC power cord
b
To a wall
outlet
L
L
ONT
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
12GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 13 Monday, February 20, 2006 6:34 PM
Getting Started
You can use the SETUP menu to set the size, select the speaker setup pattern and press
distance and location of the speakers connected ENTER to enter the selection. Check your
to this receiver. speaker pattern using the supplied “Easy Setup
Use the remote for the operation. Guide”.
1 Press ?/1 to turn on the receiver. x SW S.W. XXX (Sub woofer selection)
2 Press MAIN MENU repeatedly to select • YES
“ SET UP ”. If you connect a sub woofer, select “YES”.
• NO
3 Press V or v repeatedly to select the
If you did not connect a sub woofer, select
parameter you want to adjust.
“NO”. The front speakers are automatically
For details, see “SETUP menu parameters”
set to “LARGE” and you cannot change this
on page 13.
setting. This activates the bass redirection
Note circuitry and outputs the LFE signals from
Some speaker setup items may appear dimmed in other speakers.
the display. This means that they have been
Note
adjusted automatically due to other speaker
In order to take full advantage of the Dolby Digital
settings or may not be adjustable.
bass redirection circuitry, we recommend that you set
4 Press B or b repeatedly to select the the cut off frequency on the sub woofer as high as
setting you want. possible.
The setting is entered automatically. x L R XXXXX (Front speakers size)
Note • LARGE
Press ENTER if you select the setting for If you connect large speakers that will
“SP. PAT. X –X”. effectively reproduce bass frequencies, select
5 Repeat steps 3 and 4 until you have set “LARGE”. Normally, select “LARGE”.
all of the items that follow. • SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
SETUP menu parameters surround sound, select “SMALL” to activate
The initial setting is underlined. the bass redirection circuitry and output the
front channel bass frequencies from the sub
x XXXX SET (Speaker easy setup) woofer. When the front speakers are set to
• EASY “SMALL”, the center and surround speakers
If you want to set up your speakers are also automatically set to “SMALL”
automatically, select “EASY SET”. You can (unless previously set to “NO”).
select a pre-defined speaker pattern (see the
supplied “Easy Setup Guide”).
• NORM
If you want to adjust the settings of each
speaker manually, select “NORM SET”.
continued
13GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 14 Monday, February 20, 2006 6:34 PM
select “NO”.c)
14GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 15 Monday, February 20, 2006 6:34 PM
Getting Started
Lets you set the distance from your listening position for proper implementation of the surround effects in
to the center speaker. Center speaker distance should the Cinema Studio EX modes (page 22).
be set from a distance equal to the front speaker
distance (A on page 14) to a distance 1.5 meters closer
to your listening position (B on page 14).
x SL SR DIST. X.X m
120˚
(Surround speaker distance) 100˚
continued
15GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB03CON_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 16 Monday, February 20, 2006 6:34 PM
Tip
Surround speaker position is designed specifically for 6: Adjusting the speaker
implementation of the Cinema Studio EX modes.
For other sound fields, speaker position is not so levels and balance
critical. Those sound fields were designed under the
premise that the surround speakers would be located — TEST TONE
behind the listening position, but presentation remains
fairly consistent even with the surround speakers Adjust the speaker levels and balance while
positioned at a rather wide angle. However, if the listening to the test tone from your listening
speakers are pointing toward the listener from the position.
immediate left and right of the listening position, the Use the remote for the operation.
surround effects becomes unclear unless set to
“SIDE/LO” or “SIDE/HI”. Tip
Nevertheless, each listening environment has many The receiver employs a test tone with a frequency
variables, such as wall reflections, and you may obtain centered at 800 Hz.
better results using “BEHD/HI” if your speakers are 1 Press ?/1 to turn on the receiver.
located high above the listening position, even if they
are to the immediate left and right. 2 Press TEST TONE.
Therefore, although it may result in a setting contrary “T. TONE” appears in the display.
to the above explanation, we recommend that you The test tone is output from each speaker in
playback multi channel surround encoded software and sequence and the display will automatically
select the setting that provides a good sense of
change as follows:
spaciousness and that best succeeds in forming a
cohesive space between the surround sound from the LEFT (Front left) t CENTER (Center) t
surround speakers and the sound of the front speakers. RIGHT (Front right) t SURR R
If you are not sure which sounds best, select (Surround right) t SURR L (Surround
“BEHD/LO” or “BEHD/HI” and then use the speaker left) t S. WOOFER (Sub woofer)
distance parameter and speaker level adjustments to
obtain proper balance.
3 Adjust the speaker levels and balance
using the LEVEL menu so that the level
x SP > XXX Hz of the test tone sounds the same from
(Speaker crossover frequency)* each speaker.
Initial setting: 100 Hz For details on the LEVEL menu settings,
Lets you adjust the bass crossover frequency of see page 27.
speakers in SETUP menu. You can adjust the bass
Tips
crossover frequency from 40 Hz to 160 Hz in 9 steps.
• To adjust the level of all speakers at the same
time, press MASTER VOL +/– on the remote or
* This setup item is only available when at least one
turn MASTER VOLUME on the receiver.
speaker is set to “SMALL” and the corresponding
• The adjusted value are shown in the display
speaker segment flashes in the display.
during adjustment.
4 Press TEST TONE again after
adjustment.
The test tone turns off.
Note
The test tone will automatically cancel when you
activate the karaoke function.
16GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB04BSC_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 17 Monday, February 20, 2006 6:34 PM
Amplifier Operation
1 Turn INPUT SELECTOR to select the antennas to the receiver (see page 9).
input.
Tip
The selected input appears in the display.
The tuning scale differs depending on the area code as
To select the Display shown in the following table. For details on area codes,
VCR VIDEO 1 or see page 2.
VIDEO 2
Satellite tuner VIDEO 2 Area code FM AM
continued
17GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB04BSC_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 18 Monday, February 20, 2006 6:34 PM
18GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB04BSC_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 19 Monday, February 20, 2006 6:34 PM
Amplifier Operation
The last received station is tuned in.
You can check the sound field etc. by changing
Tip the information in the display.
You can also use the INPUT SELECTOR knob
on the receiver. Press DISPLAY repeatedly.
2 Press PRESET + or PRESET – Each time you press DISPLAY, the display will
change cyclically as follows.
repeatedly to select the preset station
you want. Current karaoke score1) t Index name of the
input2) t Selected input t Sound field
Each time you press the button, you can
currently applied
select the preset station as follows:
When the tuner is selected
tA1yA2y...yA0yB1yB2y...yB0T
Index name of preset station2) t Frequency t
Sound field currently applied
tC0y...yC2yC1T
1) Karaoke score appears only when you have
To select the preset station activated the karaoke function and scoring system.
2) Index name appears only when you have assigned
directly
one to the input or preset station (page 30). Index
Press the numeric buttons on the remote. name does not appear when only blank spaces have
been entered, or it is the same as the input name.
The preset station of the selected number in the
current memory page is tuned in. Press SHIFT
repeatedly on the remote to change the memory
page.
19GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB04BSC_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 20 Monday, February 20, 2006 6:34 PM
A SW: Lights up when sub woofer selection is H D.RANGE: Lights up when dynamic range
set to “YES” (page 13) and the audio signal is compression is activated (page 28).
output from the SUB WOOFER jack.
I COAX: Lights up when the source signal is a
B LFE: Lights up when the disc being played digital signal being input through the
back contains the LFE (Low Frequency COAXIAL terminal.
Effect) channel and the LFE channel signal is
J OPT: Lights up when the source signal is a
actually being reproduced.
digital signal being input through the
C SP: Lights up when you turn on the receiver. OPTICAL terminal.
D ; DIGITAL: Lights up when the receiver is K SLEEP: Lights up when sleep timer is
decoding signals recorded in the Dolby Digital activated.
format.
L Playback channel indicators: The letters
Note (L, C, R, etc.) indicate the channels being
When playing a Dolby Digital format disc, be played back. The boxes around the letters vary
sure that you have made digital connections and to show how the receiver downmixes the
that INPUT MODE is not set to “ANALOG” source sound (based on the speakers settings).
(page 27).
L (Front Left), R (Front Right), C (Center
E ; PRO LOGIC II: “; PRO LOGIC” lights (monaural)), SL (Surround Left), SR
up when the receiver applies Pro Logic (Surround Right), S (Surround (monaural or
processing to 2 channel signals in order to the surround components obtained by Pro
output the center and surround channel Logic processing))
signals. “; PRO LOGIC II” lights up when Example:
the Pro Logic II Movie/Music decoder is Recording format (Front /Surround): 3/2
activated. However, these indicators do not
Output channel: When the surround speakers size
light up if both the center and surround parameter is set to “NO”
speakers are set to “NO” and you select a
Sound Field: A.F.D. AUTO
sound field using the A.F.D. button.
F DTS: Lights up when DTS signals are input. L C R
Note SL SR
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 27).
G Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 17–19 for tuner operations.
20GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB05SND_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 21 Monday, February 20, 2006 6:34 PM
continued
21GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB05SND_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 22 Monday, February 20, 2006 6:34 PM
22GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB05SND_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 23 Monday, February 20, 2006 6:34 PM
23GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB06ENJ_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 24 Monday, February 20, 2006 6:34 PM
You can enjoy karaoke by singing along with the The same echo level is applied to both MIC 1 and
MIC 2.
selected input. Before operation, make sure you
have set the receiver to karaoke function. To cancel the karaoke function
Note The karaoke function will be canceled when you
The karaoke function cannot be used when you select do the following.
Tuner FM/AM. • Press KARAOKE ON/OFF repeatedly to
1 Turn INPUT SELECTOR to select the select “KARA OFF” (the indicator turns off).
input you want. • Set “KARA XXX” in the KARAOKE menu
to “KARA OFF”.
2 Press KARAOKE ON/OFF repeatedly to
• Select another input.
select “KARA ON”.
The KARAOKE ON/OFF indicator lights • Turn the power off.
up and the karaoke function is activated. Notes
• You can use the MUSIC VOLUME knob and
Tip
microphone only when the karaoke function is
You can also use the KARAOKE menu to
activated.
activate the karaoke function (page 25).
• If acoustic feedback (howling) occurs, move the
3 Turn MIC 1 VOL or MIC 2 VOL to MIN to microphone away from the speakers or change the
reduce the microphone volume level. direction of the microphone.
24GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB06ENJ_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 25 Monday, February 20, 2006 6:34 PM
Notes
• This parameter is valid only when the karaoke Advanced karaoke
function is activated.
• If the music is very loud during karaoke function and settings
you have reduced the volume level using the MUSIC
VOLUME knob, be sure to adjust the MASTER
VOLUME to reduce the overall volume level before Using the KARAOKE menu to
you cancel the karaoke function. This is because the adjust the karaoke settings
MASTER VOLUME level is not reduced when you
adjust the MUSIC VOLUME. You can adjust various karaoke settings using
x Music tone the KARAOKE menu.
Use the remote for the operation.
Enjoying Karaoke
Turn Music Tone knobs to adjust the music
tone level. 1 Press MAIN MENU repeatedly to select
“ KARA ”.
You can adjust the music tone level in 3 bands – Low,
Medium and High. 2 Press V or v repeatedly to select the
parameter you want to adjust.
For details, see “KARAOKE menu
parameters” on page 25.
3 Press B or b repeatedly to select the
setting you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 to adjust the other
items.
continued
25GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB06ENJ_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 26 Monday, February 20, 2006 6:34 PM
26GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB07ADV_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 27 Monday, February 20, 2006 6:34 PM
continued
27GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB07ADV_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 28 Monday, February 20, 2006 6:34 PM
28GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB07ADV_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 29 Monday, February 20, 2006 6:34 PM
x DEC. XXXX
Advanced settings (Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
Using the CUSTOMIZE menu • AUTO
to adjust the receiver Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
You can adjust various receiver settings using • PCM
the CUSTOMIZE menu. PCM signals are given priority (to prevent the
Use the remote for the operation. interruption when playback starts). Even when other
1 Press MAIN MENU repeatedly to select
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to “DEC.
“ CUSTOM ”.
PCM”.
2 Press V or v repeatedly to select the Note
parameter you want to adjust.
Notes x [DIMMER]
• This parameter is useful when you use a large LCD (Brightness of the display)
or Plasma monitor or projection TV. Lets you adjust the brightness of the display in 3 steps.
• This parameter is only valid when you use a sound
x NAME IN
field selected with the 2CH or A.F.D. buttons.
(Naming the inputs)
• This parameter is not valid when PCM 96 kHz or
DTS 2048 signals are input. Lets you set the name of inputs selected with the input
buttons on the remote (except for TUNER). For details,
see “Naming preset stations and inputs” on page 30.
29GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB080TH_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 30 Monday, February 20, 2006 6:34 PM
30GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB080TH_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 31 Monday, February 20, 2006 6:34 PM
Lighting devices
(not supplied)
Other Operations
DIGITAL ANTENNA
OPTICAL
SA-CD/
CD
IN
AM
L
For details on the use of the D-LIGHT SYNC Controller and the lighting devices, refer to operating
instructions supplied with the respective devices.
31GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB080TH_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 32 Monday, February 20, 2006 6:34 PM
32GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB09REM_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 33 Monday, February 20, 2006 6:34 PM
wk G ENTER g
Tip qg*
wj f
Under normal conditions, the batteries should last for RETURN/EXIT DISPLAY
about 6 months. When the remote no longer operates TV CH – c STEP C TV CH +
qh
PRESET – REPLAY ADVANCE PRESET +
the receiver, replace all batteries with new ones. wh . < < > qj
Notes wg TUNING – TUNING + qk
m H M
• Do not leave the remote in an extremely hot or humid wf ql
TV
place.
wd X x w;
• Do not use a new battery with an old one.
ws wa*
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a
malfunction.
• If you don’t use the remote for an extended period of
time, remove the batteries to avoid possible damage * The MASTER VOL +, numeric button 5 and H
from battery leakage and corrosion. buttons have a tactile dot. Use the tactile dot as a
reference when operating the receiver and other
audio/video components.
** Input buttons
continued
33GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB09REM_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 34 Monday, February 20, 2006 6:34 PM
The tables below show the settings of each Remote Operations Function
button. Button
Remote Operations Function ENTER wl Receiver/ Enters the selection.
Button VCR/
A.F.D. ef Receiver Selects the decoding CD player/
mode for audio sound. DVD player/
Satellite tuner/
ANGLE DVD player Selects viewing angle or
MD deck
qs changes the angles.
FM MODE Receiver Selects FM monaural
ANT 0 VCR/ Selects output signal
9 or stereo reception.
Satellite tuner from the antenna
terminal: TV signal or JUMP qs Satellite tuner Toggles between the
VCR program. previous and the
current channels.
AUDIO DVD player/ Changes the sound to
9 Satellite tuner Multiplex, Bilingual or MAIN Receiver Selects the menu of
Multi channel TV MENU 5 the receiver.
sound. MASTER Receiver/TV Adjusts the master
AV VCR/ Displays menu. VOL +/– volume of the
MENU qd DVD player/ qg receiver.
Satellite tuner MEMORY Receiver Stores the radio
AV ?/1 VCR/ Turns the audio and qa stations.
1 CD player/ video components on or MOVIE 6 Receiver Selects the pre-
DVD player/ off. programmed sound
Satellite tuner/ fields for movie.
MD deck MPX 9 VCR Select main or sub
CLEAR DVD player/ Clears a mistake when language.
ea Satellite tuner you press the incorrect MUSIC 7 Receiver Selects the pre-
numeric buttons or programmed sound
returns to continuous fields for music.
playback etc.
MUTING qf Receiver Mutes the sound from
DISPLAY Receiver/ Selects information the receiver.
qh VCR/ displayed on the TV
PRESET +/– Receiver Selects preset stations.
CD player/ screen.
qj wh
DVD player/
Satellite tuner/ TV/VCR/ Select preset channel.
MD deck Satellite tuner
D.SKIP CD player/ Skips discs (multi-disc RETURN/ DVD player Returns to the
qa DVD player changer only). EXIT wj previous menu.
D.TUNING Receiver Enters direct tuning Satellite tuner Exits the menu.
0 mode. SA-CD/CD Receiver To listen to Super
DUAL Receiver Selects the language you 4 Audio CD or compact
MONO 8 want during digital disc.
broadcast. SHIFT qs Receiver Selects a memory
DVD 3 Receiver To watch DVD. page for presetting
radio stations or
ENTER TV/VCR/ After selecting a
tuning to preset
qa Satellite tuner channel, disc or track
stations.
using the numeric
buttons, press to enter
the value.
34GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB09REM_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 35 Monday, February 20, 2006 6:34 PM
continued
35GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB09REM_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 36 Monday, February 20, 2006 6:34 PM
36GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB10ADD_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 37 Monday, February 20, 2006 6:34 PM
On cleaning
Clean the cabinet, panel and controls with a soft cloth
Additional Information slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
Precautions solvent such as alcohol or benzine.
Additional Information
service shop.
On heat buildup
Although the receiver heats up during operation, this is
not a malfunction. If you continuously use this receiver
at a large volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid burning
yourself, do not touch the cabinet.
On placement
• Place the receiver in a location with adequate
ventilation to prevent heat buildup and prolong the
life of the receiver.
• Do not place the receiver near heat sources, or in a
place subject to direct sunlight, excessive dust or
mechanical shock.
• Do not place anything on top of the cabinet that
might block the ventilation holes and cause
malfunctions.
• Use caution when placing the receiver on surfaces
that have been specially treated (with wax, oil,
polish, etc.) as staining or discoloration of the surface
may result.
On operation
Before connecting other components, be sure to turn
off and unplug the receiver.
37GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB10ADD_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 38 Monday, February 20, 2006 6:34 PM
38GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB10ADD_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 39 Monday, February 20, 2006 6:34 PM
Error messages
To ground
If there is a malfunction, the display shows a
message. You can check the condition of the
Radio stations cannot be tuned in. receiver by the message. Refer to the following
• Check that the antennas are connected securely. table to solve the problem.
Additional Information
Adjust the antennas and connect an external
antenna if necessary. DEC. EROR
• The signal strength of the stations is too weak Appears when the signal which the receiver cannot
(when tuning in with automatic tuning). Use direct decode (ex. DTS-CD) is input when “DEC. XXXX”
tuning (page 18). in the CUSTOMIZE menu is set to “DEC. PCM”.
• Make sure you set the tuning interval correctly Set to “DEC. AUTO”.
(when tuning in AM stations with direct tuning). PROTECT
• No stations have been preset or the preset stations Irregular current is output from the speakers. The
have been cleared (when tuning by scanning receiver will automatically turn off after a few
preset stations). Preset the stations (page 18). seconds. Check the speaker connection and turn on
• Press DISPLAY repeatedly so that the frequency the power again. If this problem persists, consult
appears in the display. your nearest Sony dealer.
continued
39GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB10ADD_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 40 Monday, February 20, 2006 6:34 PM
40GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB10ADD_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 41 Monday, February 20, 2006 6:34 PM
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
Models of area code SP, VN, TH
With 9-kHz tuning scale: 531 – 1,602 kHz
Antenna Loop antenna
Intermediate frequency 450 kHz
General
Power requirements
Area code Power requirements
SP 230 – 240 V AC,
50/60 Hz
VN, TH 220 – 230 V AC,
50/60 Hz
Power consumption
Additional Information
Area code Power consumption
SP, VN, TH 165 W
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAU002 (1)
R6 (size-AA) batteries (2)
41GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB10ADD_STR-DK5- masterpage:Right
SP.fm]
GB01COV_STR-DK5-SP.book Page 42 Monday, February 20, 2006 6:34 PM
Receiver
Music Tone knobs
ALPHABETICAL ORDER M-Z
LOW, MID, HIGH 7 (25)
A-L MASTER VOLUME 9 (16, 17, MUSIC VOLUME qs (24, 25)
25, 38, 40) SCORE (button/indicator) wa
A.F.D. qg (21, 22, 23) MEMORY/ENTER qj (18, 40) (26)
D.B.F.B. (button/indicator) 8 MIC 1 (jack) wf (24) TUNING –/+ qk (17, 18)
(28) VOCAL SELECT (button/
MIC 2 (jack) wd (24)
DISPLAY 5 (19, 39) indicator) w; (26)
MIC 1 Tone knobs
Display 6 (20) LOW, MID, HIGH 2 (24)
ECHO wh (24) NUMBERS AND SYMBOLS
MIC 2 Tone knobs
INPUT MODE q; (27) LOW, MID, HIGH 3 (24) 2CH qh (21, 23, 28)
INPUT SELECTOR qa (17, 18, MIC 1 VOL wg (24) ?/1 (power) 1 (13, 28, 40)
19, 24, 27) MIC 2 VOL ws (24)
IR (receptor) ql (33, 39) MOVIE qf (22, 28, 38)
KARAOKE ON/OFF (button/ MUSIC qd (23, 28, 38)
indicator) wj (24)
KEY CONTROL #/2 4 (26)
1 2 3 4 5 6 7 8 9
wj wh wg wf wd ws wa w; ql qk qj qh qg qf qd qs qa q;
42GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB11COV_STR-DK5- masterpage:Right
SPIX.fm]
GB01COV_STR-DK5-SP.book Page 43 Monday, February 20, 2006 6:34 PM
Index
A P
Adjusting Preset stations
CUSTOMIZE parameters 29 how to 18
KARAOKE parameters 25 how to tune 19
LEVEL parameters 27
SETUP parameters 13
speaker levels and balance 16 R
Automatic tuning 17 Remote commander 33–36
C S
Changing Selecting
display 19 component 17
Clearing receiver’s memory 40 sound field 22–23
CUSTOMIZE menu 29 SETUP menu 13
Sleep Timer 30
Sound field
D customizing 27
Digital Cinema Sound 22 pre-programmed 22–23
Additional Information
Direct tuning 18 resetting 28
Dual Mono 29 selecting 22–23
Speaker crossover frequency 16
Speakers
I adjusting speaker levels and balance 16
Indexing. See Naming connection 10
placement 10
Supplied accessories 41
K
Karaoke
adjusting the music 24 T
advanced settings 25 Test tone 16
using karaoke 24 Tuning
KARAOKE menu 25 automatically 17
directly 18
to preset stations 19
L
Labeling. See Naming
LEVEL menu 27
N
Naming 30
43GB
model name1[STR-DK5]
[2-656-285-14(1)]
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB12BKC_STR-DK5- masterpage:Left
SP.fm]
GB01COV_STR-DK5-SP.book Page 44 Monday, February 20, 2006 6:34 PM
model name1[STR-DK5]
[2-656-285-14(1)]