Professional Documents
Culture Documents
Australian Standard: Insulation Coordination (Phase-To-Earth and Phase-To-Phase, Above 1 KV) Part 2-Application Guide
Australian Standard: Insulation Coordination (Phase-To-Earth and Phase-To-Phase, Above 1 KV) Part 2-Application Guide
2—1985
Australian Standard
This is a free 7 page sample. Access the full version online.
INSULATION COORDINATION
(PHASE-TO-EARTH AND
PHASE-TO-PHASE, ABOVE 1 kV)
Review of Australian Standards. To keep abreast of progress in industry, Australian Standards are subject
to periodic review and are kept up to date by the issue of amendments or new edit ions as necessary. It is
important therefore that Standards users ensure that they are in possession of the latest edit ion, and any
amendments thereto.
Full detail s of all Australi an Standards and related publications will be found in the Standards Australi a
Catalogue of Publi cati ons; this informati on is supplemented each month by the magazine ‘The Australi an
Standard’, which subscribing members receive, and which gives detail s of new publications, new edit ions
and amendments, and of withdrawn Standards.
Suggesti ons for improvements to Australi an Standards, addressed to the head offi ce of Standards Australia,
are welcomed. Notif ication of any inaccuracy or ambiguit y found in an Australi an Standard should be made
without delay in order that the matter may be investigated and appropriate action taken.
Australian Standard
This is a free 7 page sample. Access the full version online.
INSULATION COORDINATION
(PHASE-TO-EARTH AND
PHASE-TO-PHASE, ABOVE 1 kV)
PREFACE
CONTENTS
Page
APPENDICES
Page
C Examples of Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
D Clearances in Air to Assure a Specified Impulse Withstand Voltage
in Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
ANNEX
Australian Standard
for
INSULATION COORDINATION
(PHASE-TO-EARTH AND PHASE-TO-PHASE, ABOVE 1 kV)
This standard is intended to be read in conjunction 1.3 REFERENCED DOCUMENTS. The following
with AS 1824, Part 1 (hereinafter referred to as standards are referred to in this standard, several of
Part 1). which separately cover withstand and protective
1.1 SCOPE. This standard provides some guidance on levels:
the selection of the electric strength of equipment, of AS 1034 High-voltage Current-limiting Fuses
surge diverters or protective gaps, and of the most NOTE: AS 1034 li sts the maximum overvolt ages permit ted
suitable degree of switching overvoltage control. duri ng the interr upti on of fault current by a high-voltage fuse.
NOTE: There is no Australian standard for the protective This standard is short ly to be revised and will become a Part of
AS 1033.
This is a free 7 page sample. Access the full version online.
COPYRIGHT
This is a free preview. Purchase the entire publication at the link below: